A novel nonenzymatic hydrogen peroxide sensor based on MnO2/graphene oxide nanocomposite

A new electrocatalyst, MnO₂/graphene oxide hybrid nanostructure was successfully synthesized for the nonenzymatic detection of H₂O₂. The morphological characterization was examined by scanning electron microscopy and transmission electron microscopy. The MnO₂/graphene oxide based electrodes showed high electrochemical activity for the detection of H₂O₂ in alkaline medium. The nonenzymatic biosensors displayed good performance along with low working potential, high sensitivity, low detection limit, and long-term stability, which could be attributed to the high surface area of graphene oxide providing for the deposition of MnO₂ nanoparticles. These results demonstrate that this new nanocomposite with the high surface area and electrocatalytic activity offers great promise for new class of nanostructured electrode for nonenzymatic biosensor and energy conversion applications.     

ITO上AuPd合金和Au阵列图案的制备及电催化活性的SECM表征

利用电化学湿法印章技术在氧化铟锡(ITO)导电玻璃上制备AuPd合金和Au的双组分阵列图案. 采用具有微浮雕图案的琼脂糖印章存储足够多的溶液,并通过控制电沉积的时间来控制图案厚度. 应用场发射扫描电子显微镜(FE-SEM),X射线能谱分析(EDX)和原子力显微镜(AFM)分别对ITO表面上的AuPd合金和Au的形貌和组分进行表征,并通过循环伏安(CV)技术和扫描电化学显微镜(SECM)研究比较了Au和AuPd合金的催化活性. 利用扫描电化学显微镜(SECM)的针尖产生-基底收集(TG-SC)模式和氧化还原竞争(RC)模式,发现Au电极对二茂铁甲醇氧化物(FcMeOH⁺)电催化还原能力高于AuPd合金电极,而在AuPd合金上催化还原H₂O₂的能力显著高于Au.     

Hemin-phytic Acid Functionalized Porous Conducting Polymer Hydrogel With Good Biocompatibility for Electrochemical Detection of H2O2 Released From Living Cells

A novel hemin/phytic acid doped polyaniline (PA-PANI) hydrogel composite was prepared through a simple chemical and self-assembly method, which was modified onto electrode for electrochemical detection of H₂O₂ released from living cells. It showed good analytical performance with high sensitivity, selectivity and a rapid response for the analysis of H₂O₂ in the range of 2 to 102 μM, with the detection limit of 1.2 μM. The favorable results mainly originated from both the high conductivity of PA-PANI hydrogel and its network structure preventing hemin from self-dimerization to provide active catalytic species. Furthermore, PA-PANI with good biocompatibility allowed living cells to adhere and resulted in a short diffusion distance between H₂O₂ released from cells and electrode.     

MnO2/Graphene Nanocomposites for Nonenzymatic Electrochemical Detection of Hydrogen Peroxide

MnO₂/graphene nanocomposites with different morphologies were synthesized and the petal‐shaped nanosheet MnO₂/graphene composite was developed as an electrode material for nonenzymatic hydrogen peroxide (H₂O₂) sensor. The morphology, structure, composition, and hydrophilicity of the resulting products were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), and the contact angle tests. In addition, the fabricated MnO₂/graphene composites could be used as catalysts for the electrochemical oxidation of H₂O₂. Cyclic voltammogram (CV) experiments indicated that MnO₂/graphene‐modified electrode showed good electrocatalytic activity towards both the oxidation and reduction of H₂O₂ in a neutral environment. Amperometric response results illustrated that this nonenzymatic sensor had excellent anti‐interference ability and displayed two linear ranges from 10 to 90 µM and from 0.2 to 0.9 mM with a detection limit of 2 µM.     

An intimately bonded titanate nanotube–polyaniline–gold nanoparticle ternary composite as a scaffold for electrochemical enzyme biosensors

In this work, titanate nanotubes (TNTs), polyaniline (PANI) and gold nanoparticles (GNPs) were assembled to form a ternary composite, which was then applied on an electrode as a scaffold of an electrochemical enzyme biosensor. The scaffold was constructed by oxidatively polymerising aniline to produce an emeraldine salt of PANI on TNTs, followed by gold nanoparticle deposition. A novel aspect of this scaffold lies in the use of the emeraldine salt of PANI as a molecular wire between TNTs and GNPs. Using horseradish peroxidase (HRP) as a model enzyme, voltammetric results demonstrated that direct electron transfer of HRP was achieved at both TNT-PANI and TNT-PANI-GNP-modified electrodes. More significantly, the catalytic reduction current of H₂O₂ by HRP was ∼75% enhanced at the TNT-PANI-GNP-modified electrode, compared to that at the TNT-PANI-modified electrode. The heterogeneous electron transfer rate constant of HRP was found to be ∼3 times larger at the TNT-PANI-GNP-modified electrode than that at the TNT-PANI-modified electrode. Based on chronoamperometric detection of H₂O₂, a linear range from 1 to 1200 μM, a sensitivity of 22.7 μA mM⁻¹ and a detection limit of 0.13 μM were obtained at the TNT-PANI-GNP-modified electrode. The performance of the biosensor can be ascribed to the superior synergistic properties of the ternary composite.     

Direct Electrochemistry of Cytochrome c Based on Poly(diallyldimethylammonium Chloride)‐ Graphene Nanosheets/Gold Nanoparticles Hybrid Nanocomposites and Its Biosensing

A novel biosensor was developed by entrapping cytochrome c (Cyt c) in thin films of the room temperature ionic liquid (RTIL) containing nanocomposites of poly(diallyldimethylammonium chloride)‐graphene nanosheets‐gold nanoparticles (PDDA‐Gp‐AuNPs) at a 11‐mercaptoundecanoic acid‐6‐mercapto‐1‐hexanol modified gold electrode. The synthesized PDDA‐Gp‐AuNPs hybrid nanocomposites were characterized by UV‐vis spectroscopy, Raman spectroscopy, scanning electron microscopy and atomic force microscopy. The PDDA‐Gp‐AuNPs nanocomposites could increase the effective surface of the electrode, enhance the fixed amount of Cyt c on the electrode surface, promote the electron transfer and facilitate the catalytic activity of Cyt c. The RTIL could provide a biocompatible microenvironment to keep Cyt c biological activities, act as an effective mediator to immobilize a large number of Cyt c on the electrode and have good conductivity to improve electron transfer. Therefore, the resultant electrode exhibited good electrochemical performance and electrocatalytic activity. It could be used for electrochemical detection of H₂O₂ with rapid response, high sensitivity, wide linear range and low detection limit, as well as good stability, repeatability and selectivity. The sensor might be promising for practical application.     

Development of Silver Nanowires Based Highly Sensitive Amperometric Glucose Biosensor

The fabrication of a highly sensitive amperometric glucose biosensor based on silver nanowires (AgNWs) is presented. The electrochemical behavior of glassy carbon electrode modified by Ag NWs exhibits remarkable catalytic performance towards hydrogen peroxide (H₂O₂) and glucose detection. The biosensor could detect glucose in the linear range from 0.005 mM to 10 mM, with a detection limit of 50 µM (S/N=3). The glucose biosensor shows high and reproducible sensitivity of 175.49 µA cm^?2 mM and good stability. In addition, the biosensor exhibits a good anti‐interference ability and favorable stability over relatively long‐term storage (more than 21 days).     

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

A novel biosensor for hydrogen peroxide was prepared by immobilizing horseradish peroxidase (HPR) on newly synthesized dendritic silver/silicon dioxide nanocomposites, which were coated on a glassy carbon electrode. The modified electrode was characterized with XPS, SEM, and electrochemical methods. This biosensor showed a very fast amperometric response to hydrogen peroxide with a linear range from 0.7 to 120 μM, a limit of detection of 0.05 μM and a sensitivity of 1.02 mA mM^?1 cm^?2. The Michaelis‐Menten constant of the immobilized HRP was estimated to be 0.21 mM, indicating a high affinity of the HRP to H₂O₂ without loss of enzymatic activity. The preparation of the proposed biosensor was convenient, and it showed high sensitivity and good stability.     

Viologen-terminated polyamidoamine (PAMAM) dendrimer encapsulated with gold nanoparticles for nonenzymatic determination of hydrogen peroxide

The development of an accurate and low-cost monitoring technique for hydrogen peroxide (H₂O₂) is a crucial demand in environment, food industry, medicine and biology. Herein, we report the design and synthesis of viologen terminated second (G2.0) and third generation (G3.0) poly(amidoamine) PAMAM dendrimers, followed by encapsulation with gold nanoparticles to form G2.0 and G3.0 Vio-PAMAM-AuNPs. The G2.0 and G3.0 Vio-PAMAM-AuNPs were deposited over glassy carbon electrode (GCE) to form G2.0 and G3.0 Vio-PAMAM-AuNPs/GCE modified electrodes, respectively. The electrochemical behavior of G2.0 and G3.0 Vio-PAMAM-AuNPs/GCEs were investigated using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Both the G2.0 and G3.0 Vio-PAMAM-AuNPs/GCEs showed a pair of well-defined redox peaks in 0.1 M phosphate buffer corresponding to the redox behavior of viologen V²⁺?V^?+ radical. G3.0 Vio-PAMAM-AuNPs/GCE has shown a higher current response than that of the G2.0 Vio-PAMAM-AuNPs/GCE and further the G3.0 Vio-PAMAM-AuNPs/GCE demonstrated impressive electrocatalytic activity towards reduction of H₂O₂, based on which a nonenzymatic sensor for the detection of H₂O₂ has been developed. The developed nonenzymatic sensor has displayed excellent performance towards H₂O₂ detection in the broad linear range of 0.1 mM – 6.2 mM with a low detection limit of 27 μM and high sensitivity of 202.7 μA mM^?1 cm^?2. The G3.0 Vio-PAMAM-AuNPs/GCE modified electrode with its extensive dendritic structure creating tailored sanctuary to accommodate a large number of viologen mediator and AuNPs exhibited good operational and long term stability and further the quantification of H₂O₂ in real samples has been verified by standard addition method.     

Detection of hydrogen peroxide produced at a liquid/liquid interface using scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) was used to monitor in situ hydrogen peroxide (H₂O₂) produced at a polarized water/1,2-dichloroethane (DCE) interface. The water/DCE interface was formed between a DCE droplet containing decamethylferrocene (DMFc) supported on a solid electrode and an acidic aqueous solution. H₂O₂ was generated by reducing oxygen with DMFc at the water/DCE interface, and was detected with a SECM tip positioned in the vicinity of the interface using a substrate generation/tip collection mode. This work shows unambiguously how the H₂O₂ generation depends on the polarization of the liquid/liquid interface, and how proton-coupled electron transfer reactions can be controlled at liquid/liquid interfaces.     

Amplification of bioelectrocatalytic signalling based on silver nanoparticles and DNA-derived horseradish peroxidase biosensors

Horseradish peroxidase (HRP) was immobilized onto a polyion complex membrane containing positively charged silver nanoparticles (nanosilver), double stranded DNA and poly(thionine) to fabricate highly sensitive and selective electrochemical hydrogen peroxide (H₂O₂) biosensor on a glassy carbon electrode. The presence of nanosilver provided a biocompatible microenvironment for enzyme molecules, greatly amplified the surface coverage of HRP on the electrode surface, and most importantly could act as a charge carrier. The process of the biosensor construction was characterized by scanning electron microscopy. Voltammetric and time-based amperometric techniques were employed to characterize the properties of the derived biosensor. Under optimal conditions, the biosensor has an electrocatalytic behavior towards the H₂O₂ reduction, and exhibits a linear range from 1.1 μM to 5.2 mM, with a lower detection limit of 0.2 μM. The apparent Michaelis–Menten constant of the biosensor to H₂O₂ was estimated to be 1.02 mM. Furthermore, the biosensor exhibited high sensitivity, good reproducibility, and acceptable stability. Importantly, the properties of composite film, together with the bioelectrochemical catalytic activity, could make them useful in the development of bioelectronic devices and investigation of protein electrochemistry at functional interface. Correspondence: Yan Liu, College of Chemistry, Chongqing Normal University, Chongqing 400047, P.R. China     

MnO<Subscript>2</Subscript> Nanoparticles and Carbon Nanofibers Nanocomposites with High Sensing Performance Toward Glucose

By combining the advantages of manganese dioxide nanoparticles (MnO₂ NPs) and carbon nanofibers (CNFs), a biosensing electrode surface as a high-performance enzyme biosensor is designed in this work. MnO₂ NPs and CNFs nanocomposites (MnO₂–CNFs) were prepared by using a simple hydrothermal method and then were characterized by scanning electron microscopy, powder X-ray diffraction, fourier transform infrared spectroscopy, energy dispersive spectrometry and electrochemisty. The results showed that MnO₂ NPs are uniformly attached to the surface of CNFs. Meanwhile, the MnO₂–CNFs nanocomposites as a supporting matrix can provide an efficient and advantageous platform for electrochemical sensing applications. On the basis of the improved sensitivity of MnO₂–CNFs modified electrode toward H₂O₂ at low overpotential, a MnO₂–CNFs based glucose biosensor was fabricated by monitoring H₂O₂ produced by an enzymatic reaction between glucose oxidase and glucose. The constructed biosensor exhibited a linear calibration graph for glucose in a concentration range of 0.08–4.6 mM and a low detection limit of 0.015 mM. In addition, the biosensor showed other excellent characteristics, such as high sensitivity and selectivity, short response time, and the relative low apparent Michaelis–Menten constant. Analysis of human urine spiked with glucose at different concentration levels yielded recoveries between 101.0 and 104.8%.     

Fabrication of a novel nonenzymatic hydrogen peroxide sensor based on Se/Pt nanocomposites

A novel nonenzymatic hydrogen peroxide sensor was successfully fabricated based on the Se/Pt nanocomposites. The nanocomposites were constructed via a simple solvethermal method, and were confirmed by X-ray diffraction (XRD), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of the nanocomposites at glassy carbon electrode (GCE). The results indicated that the Se/Pt nanocomposites exhibited excellent electrocatalytic activity to the reduction of H₂O₂ and could be used to construct a hydrogen peroxide amperometric sensor with a low detection limit and wide responding range.     

Highly Selective Nanostructured Electrochemical Sensor Utilizing Densely Packed Ultrathin Gold Nanowires Film

The number of studies conducted about nonenzymatic electrochemical sensors has increased in recent years due to the development of more stable and robust electrodes using noble metals. One of the key aspects for achieving high sensing performance including detection limit and sensitivity is the design of electrode architecture. Herein, we report a new electrochemical sensing platform featuring ultrathin standing gold nanowires (AuNWs) for nonenzymatic detection of hydrogen peroxide (H₂O₂). The use of AuNWs resulted in an increased electron transfer efficiency due to the higher active surface area compared to traditional gold film electrodes. This sensor demonstrates good selectivity, reproducibility, a linear range up to 49.5 mM of H₂O₂ with a sensitivity of 0.185±0.003 mAmM^?1cm^?2 and a limit of detection of 111 μM. The biological relevance of this sensor was tested in cell culture media to illustrate the performance of the proposed sensing electrode in complex biological media.     

Electrochemical Fabrication of Prussian Blue Nanocube‐decorated Electroreduced Graphene Oxide for Amperometric Sensing of NADH

In this study, Prussian blue (PB) film on the electroreduced graphene oxide (ERGO)‐modified Au electrode surface (ERGO/PB) is easily prepared by means of cyclic voltammetric technique in the mixture of K₃Fe(CN)₆ and FeCl₃. Its electrochemical behaviors for NADH biosensor are studied. The structural and morphological characters of modified electrode material are analyzed with using of XPS, XRD, Raman, EDS, and SEM techniques. ERGO/PB hybrid nanocomposite for NADH biosensor is exhibited to the higher catalytic effect (linear range from 1.0 to 100 μM, detection limit of 0.23 μM at S/N=3) compared to naked Au, ERGO‐modified Au, and PB‐modified Au electrodes. In addition to, ERGO/PB electrode was used to voltammetric and amperometric detection of H₂O₂. ERGO/PB electrodes also showed the same behavior as the NADH sensor. This ERGO/PB‐modified electrode supplied a simple, new, and low‐cost route for amperometric sensing of both NADH and H₂O₂.     

Palladium Nanoclusters Uniformly Enveloped Electrochemically Activated Graphene for Highly Sensitive Hydrogen Peroxide Sensor

Nonenzymatic sensors based on a metals nanocomposite with high sensitivity, selectivity, and stability has been received considerable interest. In this study, a novel electrochemical nanocomposite sensor based on palladium nanoclusters (PdNCs) decorated electrochemically activated graphene (EAGr) was established for highly sensitive nonenzymatic H₂O₂ sensor. The PdNCs/EAGr nanocomposite was fabricated via an electrochemical activation of Gr by the potential cycling in the range of +0.6 to ?1.8 V, followed by the electrodeposition of PdNCs at ?0.4 V applied potential. The homogeneous dispersion of PdNCs/EAGr nanocomposite were characterized by scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and linear sweep voltammetry (LSV). The PdNCs/EAGr nanocomposite electrode showed higher electrocatalytic activity towards the reduction of H₂O₂ in pH 7.0 of 0.1 M PBS by significantly enhancing the reduction peak current and reduced the reduction overpotential as well as eliminated other interfering species responses. The PdNCs/EAGr electrode displayed a wide linear range for H₂O₂ reduction from 1.0 to 1100 μM with limit of detection 0.02±0.01 μM. The higher sensitivity and selectivity as well as long‐time stability and excellent reproducibility obtained, indicating the proposed sensor is an effective H₂O₂ based sensor. In addition, the analytical application of the nancomposite sensor was successfully examined for the determination of H₂O₂ in the real sample of human urine indicating that the appreciable practicality of the nonenzymatic sensor for the determination of H₂O₂ in physiological fluids.     

Facile method to synthesize graphene-ZnS nanocomposites: preparation and application in bioelectrochemistry of hemoglobin

A novel electrochemical platform based on ZnS-doped graphene (GR-ZnS) nanocomposites was developed to achieve the direct electron transfer between hemoglobin (Hb) and the modified electrode. GR-ZnS nanocomposites were synthesized via noncovalent functionalization of pristine graphene (GR) by 1-aminopyrene and subsequent in situ synthesis of ZnS nanoparticles on the GR surface. During this process, the intrinsic electronic properties of GR could be efficiently protected. The as-prepared GR-ZnS nanocomposites were characterized and identified by means of transmission electron microscopy and energy dispersive X-ray spectrometer analysis, indicating the uniform formation of ZnS nanoparticles on the surface of GR. Fourier transform infrared spectra spectroscopic results confirmed that Hb remained its native structure in the nanocomposite material. The GR-ZnS nanocomposites could efficiently promote the direct electron transfer between Hb and electrode with the electron transfer rate constant (k _s) of 3.42 s^?1. The modified electrode was then used for the determination of H₂O₂ based on the electrocatalytic activity of Hb towards H₂O₂, which exhibited a linear range from 10 to 250 μM with a detection limit of 1.12 μM. The proposed method to fabricate GR-based hybrid nanomaterials would have a great potential for applications in various fields such as electrochemical sensing, catalytic reaction, and super capacitors.     

Novel Protocol for Covalent Immobilization of Horseradish Peroxidase on Gold Electrode Surface

A novel protocol for immobilization of horseradish peroxidase (HRP) onto diazonium functionalized screen‐printed gold electrode (SPGE) has been successfully developed. This protocol involved 1) electrochemical reduction of p‐nitrophenyl diazonium salts synthesized in situ in acidic aqueous solution to graft a layer of p‐nitrophenyl on SPGE, 2) electrochemical reduction of the nitro groups to convert to amines, 3) chemical reaction with nitrous acid to transform the amine to diazonium derivative and 4) chemical coupling of the enzyme with the diazonium group to form a covalent diazo bond. The fabricated biosensor showed the direct electrochemistry of HRP and displayed electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediator. The biosensor exhibited fast amperometric response to H₂O₂. The catalytic current increased with increasing H₂O₂ concentration from 5 μM to 30 μM and the detection limit of the biosensor was 2 μM. The biosensor exhibited acceptable sensitivity, good reproducibility and long‐term stability.     

Ion beam induced deposition of platinum carbon composite electrodes for combined atomic force microscopy–scanning electrochemical microscopy

In the present study, ion beam induced deposition (IBID) of platinum carbon (PtC) composite electrodes is evaluated for combined atomic force microscopy–scanning electrochemical microscopy (AFM–SECM) probes. After deposition, the PtC composite materials are post-treated using focused ion beam (FIB) milling to decrease the carbon content of the material. It is shown that this treatment leads to an improvement of electrode characteristics for selected analytes, including the oxidation of potassium hexacyanoferrate(II) trihydrate (Fe(CN)₆^4?) and hydrogen peroxide (H₂O₂). Moreover, the proposed approach is compatible with microfabricated AFM–SECM probes for increasing the AFM tip-integrated electroactive area while maintaining the geometric dimensions, which is important for imaging biosensor development.     

Electrochemical preparation of composite of poly brilliant cresyl blue (PBCB)–poly 5-amino-2-napthalenesulfonic acid electrode and electrocatalytic application

Poly brilliant cresyl blue (PBCB) and poly 5-amino-2-napthalenesulfonic (PANS) polymer composite modified electrode was fabricated by the electrochemical polymerization of brilliant cresyl blue and 5-amino-2-napthalenesulfonic acid. When compared polymer composite electrodes with PBCB and PANS electrode, it showed enhanced electrochemical property. The morphology of the resulting composite electrode was characterized by AFM, and the electrochemical properties of the modified electrode were characterized by cyclic voltammetry and amperometry. The composite electrode showed surface-confined and pH-dependent electrochemical property. The composite electrode exhibited high catalytic behavior toward the reduction of hydrogen peroxide at low overpotential. The detection limit and sensitivity of the electrode toward H₂O₂ detection was 5 μM and 1 μA/mM, respectively, and response time was less than 10 s for hydrogen peroxide.