Cockle shell-derived nanoparticles for optical urea biosensor development based on reflectance transduction

An optical biosensor for urea based on urease enzyme immobilised on functionalised calcium carbonate nanoparticles (CaCO₃-NPs) was successfully developed in this study. CaCO₃-NPs were synthesised from discarded cockle shells via a simple and eco-friendly approach, followed by surface functionalisation with succinimide ester groups. The fabricated biosensor is comprised of two layers. The first (bottom layer) contained functionalised NPs covalently immobilised to urease, and the second (uppermost layer) was alginate hydrogel physically immobilised to the pH indicator phenolphthalein. The biosensor provided a colorimetric indication of increasing urea concentrations by changing from colourless to pink. Quantitative urea analysis was performed by measuring the reflectance intensity of the colour change at a wavelength of 633.16 nm. The determination of urea concentration using this biosensor yielded a linear response range of 30–1000 mM (R² = 0.9901) with a detection limit of 17.74 mM at pH 7.5. The relative standard deviation of reproducibility was 1.14%, with no signs of interference by major cations, such as K⁺, Na⁺, NH?⁺, and Mg²⁺. The fabricated biosensor showed no significant difference with the standard method for the determination of urea in urine samples.     

Pigeonpea (Cajanus cajan L.) urease immobilized on glutaraldehyde-activated chitosan beads and its analytical applications

Urease from pigeonpea (Cajanus cajan L.) was covalently linked to crab shell chitosan beads using glutaraldehyde. The optimum immobilization (64% activity) was observed at 4°C, with a protein concentration of 0.24 mg/bead and 3% glutaraldehyde. The immobilized enzyme stored in 0.05 M Trisacetate buffer, pH 7.3, at 4°C had a t _1/2 of 110 d. There was practically no leaching of enzyme (<3%) from the immobilized beads in 30 d. The immobilized urease was used 10 times at an interval of 24 h between each use with 80% residual activity at the end of the period. The chitosan-immobilized urease showed a significantly higher Michaelis constant (8.3 mM) compared to that of the soluble urease (3.0 mM). Its apparent optimum pH also shifted from 7.3 to 8.5. Immobilized urease showed an optimal temperature of 77°C, compared with 47°C for the soluble urease. Time-dependent kinetics of the thermal denaturation of immobilized urease was studied and found to be monophasic in nature compared to biphasic in nature for soluble enzyme. This immobilized urease was used to analyze blood urea of some of the clinical samples from the clinical pathology laboratories. The results compared favorably with those obtained by the various chemical/biochemical methods employed in the clinical pathology laboratories. A column packed with immobilized urease beads was also prepared in a syringe for the regular and continuous monitoring of serum urea concentrations.     

Purification,Properties, and Application of a Novel Acid Urease from <Emphasis Type="Italic">Enterobacter</Emphasis> sp.

It has been demonstrated that acid urease is capable of decomposing urea in fermented beverage and foods. As urea is a precursor of ethylcarbamate, a potential carcinogenic compound, measures must be taken to control the level of urea. We herein describe the purification and characterization of a novel acid urease from Enterobacter sp. R-SYB082 and its application to the removal of urea in Chinese rice wine. The enzyme was purified to electrophoretic homogeneity using ethanol precipitation, Superdex 200 and Mono Q with a fold purification of 21.1 and a recovery of 49%. The molecular weight of the enzyme was 430,000 Da by gel filtration and 72,000 Da by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that it was a hexamer. The activity of this purified enzyme was optimal at pH 4.5 and 35 °C. The temperature stability was under 55 °C, and the pH stability was 4.0~5.0. The enzyme exhibited an apparent K _m of 19.5 μmol/l and a V _max of 109 μmol urea/mg·min at 35 °C and pH 4.5. When incubating two different kinds of Chinese rice wine with the enzyme (0.08 U/ml) at 35 °C for 7 days, over 85% of urea was decomposed, and at 20 °C, above 78% was removed. The result showed that the enzyme is applicable to elimination of urea in Chinese rice wine.     

An amperometric urea biosensor based on covalent immobilization of urease on copolymer of glycidyl methacrylate and vinylferrocene

A unique urea biosensor construction based on the direct covalent attachment of urease onto a polymeric electron transfer mediator, poly(glycidyl methacrylate-co-vinylferrocene)-coated electrode is described. Amperometric response was measured as a function of urea concentration, at a fixed potential of +0.35 V vs. Ag/AgCl in phosphate-buffered saline (pH 7.0). Covalent immobilization of the urease directly to the functionalized ferrocene copolymer surface produced biosensors with a short response time (about 3 s) and provided low detection limits. The stability, reusability, pH, and temperature response of the biosensor, besides its kinetic parameter, were also studied.     

Synthesis,in vitro urease inhibitory activity and molecular docking of 3,5‐disubstituted thiadiazine‐2‐thiones

A series of 3,5‐disubstituted‐tetrahydro‐thiadiazine‐2‐thione ( 1 ‐ 16 ) have been synthesized, characterized by elemental analysis, infrared (IR), UV‐visible, ¹H NMR, ¹³C NMR, and MS spectroscopic techniques, and screened against jack bean urease. Among 16 compounds, compounds ( 1 ), ( 2 ), ( 3 ), ( 4 ), ( 6 ), ( 7 ), and ( 9 ) demonstrated excellent urease inhibitory activity with IC₅₀ values (9.8 ± 0.5, 11.0 ± 0.6, 16.0 ± 1.5, 17.2 ± 0.5, 15.4 ± 0.5, 19.7 ± 0.4, and 15.8 ± 0.2μM), respectively, even better than the standard thiourea (IC₅₀ = 21 ± 0.01μM). However, compound ( 8 ) shows an almost same level of inhibition (IC₅₀ = 22.9 ± 0.3μM), as like standard. In this work, we reported for the first time urease inhibitory activity of thiadiazine thiones and its molecular docking studies.     

Development of urease based amperometric biosensors for the inhibitive determination of Hg (II)

Enzymatic amperometric procedures for measurement of Hg (II), based on the inhibitive action of this metal on urease enzyme activity, were developed. Screen-printed carbon electrodes (SPCEs) and gold nanoparticles modified screen-printed carbon electrodes (AuNPs/SPCEs) were used as supports for the cross-linking inmobilization of the enzyme urease. The amperometric response of urea was affected by the presence of Hg (II) ions which caused a decreasing in the current intensity. The optimum working conditions were found using experimental design methodology. Under these conditions, repeatability and reproducibility for both types of biosensors were determined, reaching values below 6% in terms of residual standard deviation. The detection limit obtained for Hg (II) was 4.2 × 10^?6 M for urease/SPCE biosensor and 5.6 × 10^?8 M for urease/AuNPs/SPCE biosensor. Analysis of the possible effect of the presence of foreign ions in the solution was performed. The method was applied to determine levels of Hg (II) in spiked human plasma samples.     

Synthesis,in vitro evaluation,and molecular docking studies of benzofuran based hydrazone a new inhibitors of urease

This work has described the synthesis of novel class (1–25) of benzofuran based hydrazone. The hybrid scaffolds (1–25) of benzofuran based hydrazone were evaluated in vitro, for their urease inhibition. All the newly synthesized analogues (1–25) were found to illustrate moderate to good urease inhibitory profile ranging from 0.20 ± 0.01 to 36.20 ± 0.70 µM. Among the series, compounds 22 (IC₅₀ = 0.20 ± 0.01 µM), 5 (IC₅₀ = 0.90 ± 0.01 µM), 23 (IC₅₀ = 1.10 ± 0.01 µM) and 25 (IC₅₀ = 1.60 ± 0.01 µM) were found to be the many folds more potent than thiourea as standard inhibitor (IC₅₀ = 21.86 ± 0.40 µM). The elevated inhibitory profile of these analogues might be due to presence of dihydroxy and flouro groups at different position of phenyl ring B attached to hydrazone skeleton. These dihydroxy and fluoro groups bearing compounds have shown many folds better inhibitory profile through involvement of oxygen of dihydroxy groups in hydrogen bonding with active site of enzymes. Various types of spectroscopic techniques such as ¹H-, ¹³C- NMR and HREI-MS spectroscopy were used to confirm the structure of all the newly developed compounds. To find SAR, molecular docking studies were performed to understand, the binding mode of potent inhibitors with active site of enzymes and results supported the experimental data.     

Synthesis,characterization, and urease inhibitory activity of two copper(II) complexes of cyclohexanecarboxylate

The crystal structures of two copper(II) complexes of the cyclohexanecarboxylate ligand, namely [Cu(C₆H₁₁CO₂)₂(H₂O)₂]·H₂O (1) and [Cu(dpyam)₂(C₆H₁₁CO₂)](NO₃)·H₂O (2) (C₆H₁₁CO₂H = cyclohexanecarboxylic acid; dpyam = di-2-pyridylamine), have been determined by single-crystal X-ray analysis. Complex 1 contains the square-planar trans-CuO₄ chromophore, while 2 shows the square pyramidal cis-distorted octahedral CuN₄OO′ chromophore. Both complexes were found to show strong inhibitory activity against jack bean urease (IC₅₀ = 1.75 and 8.57 μM for 1 and 2, respectively), when compared with acetohydroxamic acid (IC₅₀ = 63.12 μM).     

Application of the extended solvation model for thermodynamic study of copper ion binding to Jack bean urease

A Thermodynamic study on the interaction Jack bean urease, JBU, with Cu²⁺ ion was studied by isothermal titration calorimetry (ITC) at 300 and 310 K in 30 mM Tris buffer solution, pH 7.0. The heats of JBU + Cu²⁺ interactions are reported and analyzed in terms of the extended solvation theory. It was indicated that there are a set of 12 identical and non-cooperative sites for Cu²⁺ ion. The binding of Cu²⁺ ion with JBU is exothermic with dissociation equilibrium constants of 284.883 and 345.855 μM at 300 and 310 K, respectively.     

Synthesis, crystal structures, and urease inhibitory activities of two azido-bridged polynuclear copper(II) complexes with Schiff bases

Two azido-bridged polynuclear Cu(II) complexes with the formulae [Cu(L1)(μ_1,3-N₃)] _n and [Cu(L2)(μ_1,3-N₃)] _n (HL1 = 2-[(2-morpholin-4-ylethylimino)methyl]phenol, HL2 = 2-methoxy-6-[(2-piperidin-1-ylethylimino)methyl]phenol), have been synthesized and characterized by physico-chemical and spectroscopic methods. The Cu atom in each of the complexes is five-coordinate in a square pyramidal geometry, with one O and two N atoms of a Schiff base ligand and one terminal N atom of a bridging azido ligand defining the base-plane, and with another terminal N atom of a symmetry-related azido ligand occupying the apical position. The molecules are linked through end-to-end azido bridges, forming one-dimensional polymeric chains. Both of the complexes show moderate inhibitory activities against jack bean urease.     

Use of CdSe/ZnS luminescent quantum dots incorporated within sol-gel matrix for urea detection

In this work, urea detection techniques based on the pH sensitivity of CdSe/ZnS QDs were developed using three types of sol-gel membranes: a QD-entrapped membrane, urease-immobilized membrane and double layer consisting of a QD-entrapped membrane and urease-immobilized membrane. The surface morphology of the sol-gel membranes deposited on the wells in a 24-well microtiter plate was investigated. The linear detection range of urea was in the range of 0-10 mM with the three types of sol-gel membranes. The urea detection technique based on the double layer consisting of the QD-entrapped membrane and urease-immobilized membrane resulted in the highest sensitivity to urea due to the Michaelis-Menten kinetic parameters. That is, the Michaelis-Menten constant (K_m =2.0745 mM) of the free urease in the QD-entrapped membrane was about 4-fold higher than that (K_m =0.549 mM) of the immobilized urease in the urease-immobilized membrane and about 12-fold higher than that (K_m =0.1698 mM) of the immobilized urease in the double layer. The good stability of the three sol-gel membranes for urea sensing over 2 months showed that the use of sol-gel membranes immobilized with QDs or an enzyme is suitable for biomedical and environmental applications.     

Spectrophotometric flow-injection determination of urea in body fluids by using an immobilized urease reactor

A flow system involving a packed-bed enzyme reactor (volume 180 μl) with urease immobilized covalently on poly(glycidyl methacrylate)-coated porous glass is used for determining urea in blood serum and urine. Enzymatically produced ammonia is converted to an indophenolate dye (by oxidative coupling with hypochlorite and sodium salicylate), which is detected spectrophotometrically at 700 nm. The calibration graph is rectilinear for 25–500 μM urea when injecting samples (75 μl) diluted 1:50 for serum or 1:1000 for urine at a frequency of 60 h^?1; the relative standard deviation is 1.1% for ten injections of 300 μM urea. The immobilized urease is stabilized by the addition of disodium EDTA, sodium azide and 2-mercaptoethanol to a 0.2 M phosphate buffer (pH 6.9) used as the carrier stream, which serves also as a preservative for longterm storage of the urease reactor packing at 4°C.     

Determination of mercury(II) traces in drinking water by inhibition of an urease reactor in a flow injection analysis (FIA) system

 The integration of an urease reactor into a gas diffusion flow injection system was investigated for the determination of urease inhibitors. The enzyme was immobilized by entrapping in polyacrylamide gel. Besides copper and silver ions mercury ions inhibit the conversion of urea to carbon dioxide and ammonia catalysed by urease. The pH change of the carrier solution caused by the ammonia released was measured potentiometrically with a pH electrode. The inhibition behaviour of Hg(II) ions was investigated. A linear range from 2 to 20 μg L^-1 Hg(II) was obtained after a 90 s inhibition, with a correlation coefficient of r=0.9997. The relative standard deviation was 1.4% for five measurements of 2 μg L^-1Hg(II). A sample frequency of 7 h^-1 was achieved. The inhibited enzyme can be reactivated. The method was applied to the determination of Hg(II) in two drinking water samples. Received: 16 April 1996/Revised: 3 June 1996/Accepted: 11 June 1996     

Electrochemical urea biosensor based on Proteus mirabilis urease immobilized over polyaniline PANi-Glassy carbon electrode

In this study, a novel, sensitive electrochemical enzyme-based biosensor for urea detection was presented. This biosensor combines a three-electrode system consisting of a classic Glassy Carbon Electrode (GCE) as the working electrode, a platinum counter electrode, and Ag/AgCl as the reference electrode. To construct this urea platform, a GCE was modified with a polyaniline (PANi) film. Then, bacterial urease from Proteus mirabilis was immobilized on the modified GCE (P_m-Urease-PANi-GCE). For the characterization of surface modification, Cyclic Voltammetry (CV) and Scanning Electron Microscope (SEM) were applied, while the Square Wave Voltammetry (SWV) technique was performed for urea detection. The main analytical characteristics of the P_m-Urease-PANi-GCE biosensor showed a good linear range from 0.1 to 10 mM of urea, a limit of detection (LOD) of 0.1 mM, a Michaelis-Menten K_m of 0.23 mM, and a sensitivity value 46 μA/mM/cm². This biosensor allows the detection of urea in solutions, and it could be improved for further medical, environmental, or engineering applications.     

Construction of a simple optical sensor based on air stable lipid film with incorporated urease for the rapid detection of urea in milk

This work describes the construction of a simple optical sensor for the rapid, selective and sensitive detection of urea in milk using air stable lipid films with incorporated urease. The lipid film is stabilized on a glass filter by polymerization using UV (ultra-violet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′-azobis-(2-methylpropionitrile) was the initiator. Urease is incorporated within this mixture prior to the polymerization. The presence of the enzyme in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of urea provided a “switching on” of the fluorescence which allows the rapid detection of this compound at the levels of 10⁻⁸ M concentrations. The investigation of the effect of potent interferences included a wide range of compounds usually found in foods and also of proteins and lipids. These lipid membranes were used for the rapid detection of urea in milk.     

Immobilization of urease on composite fibre by using a gel formation of cellulose acetate and titanium iso-propoxide

Urease was entrap-immobilized on composite gel fibre of cellulose acetate and TiO₂. The immobilization can be easily performed under mild conditions. The gel fibre is stable in high ionic solutions and in phosphate solutions with a range of pH 6–8.The pH and thermal stabilities of immobilized urease were higher than those of the native one.     

New cocrystals of heterocyclic drugs: structural,antileishmanial, larvicidal and urease inhibition studies

Many heterocycles have been developed as drugs due to their capacity to interact productively with biological systems. The present study aimed to synthesize cocrystals of the heterocyclic antitubercular agent pyrazinamide ( PYZ , 1 , BCS III) and the commercially available anticonvulsant drug carbamazepine ( CBZ , 2 , BCS class II) to study the effect of cocrystallization on the stability and biological activities of these drugs. Two new cocrystals, namely, pyrazinamide–homophthalic acid (1/1) ( PYZ:HMA , 3 ) and carbamazepine–5-chlorosalicylic acid (1/1) ( CBZ:5-SA , 4 ), were synthesized. The single-crystal X-ray diffraction-based structure of carbamazepine–trans-cinnamic acid (1/1) ( CBZ:TCA , 5 ) was also studied for the first time, along with the known cocrystal carbamazepine–nicotinamide (1/1) ( CBZ:NA , 6 ). From a combination drug perspective, these are interesting pharmaceutical cocrystals to overcome the known side effects of PYZ ( 1 ) therapy, and the poor biopharmaceutical properties of CBZ ( 2 ). The purity and homogeneity of all the synthesized cocrystals were confirmed by single-crystal X-ray diffraction, powder X-ray diffraction and FT–IR analysis, followed by thermal stability studies based on differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Detailed intermolecular interactions and the role of hydrogen bonding towards crystal stability were evaluated quantitatively via Hirshfeld surface analysis. The solubility of CBZ at pH 6.8 and 7.4 in 0.1 N HCl and H₂O were compared with the values of cocrystal CBZ:5-SA ( 4 ). The solubility of CBZ:5-SA was found to be significantly improved at pH 6.8 and 7.4 in H₂O. All the synthesized cocrystals 3 – 6 exhibited a potent urease inhibition (IC₅₀ values range from 17.32 ± 0.89 to 12.3 ± 0.8 µM), several times more potent than standard acetohydroxamic acid (IC₅₀ = 20.34 ± 0.43 µM). PYZ:HMA ( 3 ) also exhibited potent larvicidal activity against Aedes aegypti. Among the synthesized cocrystals, PYZ:HMA ( 3 ) and CBZ:TCA ( 5 ) were found to possess antileishmanial activity against the miltefosine-induced resistant strain of Leishmania major, with IC₅₀ values of 111.98 ± 0.99 and 111.90 ± 1.44 µM, respectively, in comparison with miltefosine (IC₅₀ = 169.55 ± 0.20 µM).     

Characterization of urease derived from Citrullus lanatus (watermelon) seeds to estimate total Kjeldahl nitrogen in human urine

A urease extract prepared by decanting liquid from a suspension of finely ground Citrullus lanatus (watermelon) seeds was characterized and applied to dilute urine samples to demonstrate a low-cost field method to estimate total Kjeldahl nitrogen (TKN) concentrations in human urine. The extract exhibited a Michaelis-Menten constant, K_m, of 3.00 mM urea and a specific activity of up to 12.2 U/mg protein at an optimum pH of 8.1. A statistical F-test on 54 samples demonstrated that TKN can be estimated as the total ammonium-nitrogen recovered upon addition of urease in dilute fresh and stale urine samples. The total ammonium-nitrogen in urine samples determined after treatment with watermelon seed urease was consistent with that determined using traditional acid digestion techniques. The extract retained 85% of its initial capacity after three months of refrigeration. The effectiveness of this method to assay nitrogen in unbuffered urine samples will be useful in nitrogen analyses in nutrient recovery and urine or slurry storage contexts. Accordingly, this study is useful in understanding the kinetics of a plant-derived urease acting in dilute urine.     

Ultrasensitive polyaniline-nickel oxide cladding modified with urease immobilized intrinsic optical fiber urea biosensor

Herein, we report a polyaniline-nickel oxide (PANI-NiO) nanocomposite as an efficient immobilization matrix for development the optical fiber urea biosensor. Optical fiber sensing probe was developed by removing some portion of optical fiber at middle and modified with PANI-NiO matrix. After the modification of cladding removed portion, it was immobilized with enzyme urease via glutaraldehyde as a bi-functional cross-linking agent. The physicochemical and optical properties of the PANI-NiO matrix were explored by X-ray diffraction, scanning electron microscopy, ultraviolet–visible, and Fourier transform infrared spectroscopic techniques. The characteristic features and performance of the developed sensor were evaluated via recording the output power and modal power distribution by means of a charge-coupled device camera. The developed urea biosensor exhibits a selective response towards urea concentrations in the linear range 1 nM–100 mM with a lower detection limit of 1 nM. Sensor recorded as a 40 days stability and response time ~1 min. Thus, the obtained experimental results of the developed sensor promote its applicability with practical prospects in diverse field.     

Enzyme and inhibition assay of urease by continuous monitoring of the ammonium formation based on capillary electrophoresis

We present here an easy‐to‐operate and efficient method for enzyme and inhibition assays of urease, which is a widely distributed and important enzyme that catalyzes the hydrolysis of urea to ammonia and CO₂. The assay was achieved by integrating CE technique and rapid on‐line derivatization method, allowing us to continuously drive the sample to the capillary, thus to measure the amount of the product ammonia from the beginning to the end of the reaction. The method exhibits excellent repeatability with RSD as low as 2.5% for the initial reaction rate (n = 5), with the LOD of ammonia of 20 μM (S/N = 5). The enzyme activity as well as the inhibition of urease by Cu²⁺ were investigated using the present method. The results show that Cu²⁺ is a noncompetitive inhibitor on urease, in accordance with the result published in the literature. The enzyme activity and inhibition kinetic constants were obtained and were found to be consistent with the results of traditional off‐line enzyme assays. Our study indicates that the present approach is a reliable and convenient method for analysis of the urease activity and inhibition kinetics by continuous on‐line monitoring of the ammonium formation based on CE.