In‐situ enrichment of phosphopeptides on MALDI plates modified by ambient ion landing

We report substantial in‐situ enrichment of phosphopeptides in peptide mixtures using titanium and zirconium dioxide‐coated matrix assisted laser desorption‐ionization (MALDI) plates prepared by recently reported ambient ion landing deposition technique. The technique was able to modify four common materials currently used for MALDI targets (stainless steel, aluminum, indium‐tin oxide glass and polymeric anchor chip). The structure of the deposited dioxide was investigated by electron microscopy, and different surfaces were compared and discussed in this study. Two standard proteins were used to test the enrichment capabilities of modified MALDI plates: casein and in‐vitro phosphorylated trehalase. The enrichment of casein tryptic digest resulted in identification of 20 phosphopeptides (including miscleavages). Trehalase was used as a suitable model of larger protein that provided more complex peptide mixture after the trypsin digestion. All four possible phosphorylation sites in trehalase were identified and up to seven phosphopetides were found (including methionine oxidations and miscleavages). Two different mass spectrometers, MALDI‐Fourier transform ion cyclotron resonance (FTICR) and MALDI‐time of flight, were used to detect the phosphopeptides from modified MALDI plates after the enrichment procedure. It was observed that the desorption‐ionization phenomena on the modified surfaces are not critically influenced by the parameters of the different MALDI ion sources (e.g. different pressure, different extraction voltages), and thus the presence of dioxide layer on the standard MALDI plate does not significantly interfere with the main MALDI processes. The detection of phosphopeptides after the enrichment could be done by both instruments. Desorption electrospray ionization coupled to the FTICR was also tested, but, unlike MALDI, it did not provide satisfactory results. Copyright © 2012 John Wiley & Sons, Ltd.     

酪氨酸磷酸化多肽的化学选择性富集

酪氨酸激酶在生物分子的信号转导中起着非常重要的作用,目前除抗体技术外尚无有效的化学方法能够实现对酪氨酸磷酸化蛋白或多肽的选择性富集,然而抗体通常成本较高,而且往往会有模体序列的选择性识别。本文发展了一种基于化学反应的酪氨酸磷酸化肽段的选择性富集,该方法利用了β消除反应只能发生在丝氨酸和苏氨酸磷酸化多肽的特性,以反相选择方法,从而实现对酪氨酸磷酸化肽段的选择性富集。以标准多肽对其反应效率和回收率进行了考察,20分钟内丝氨酸磷酸化多肽的β消除反应效率可达99%以上,而同时酪氨酸磷酸化肽段可保持70%的回收率。进一步以六种标准蛋白混合物的酶解产物对其进行考察,经β消除反应和亲和富集之后,只有酪氨酸磷酸化多肽可以被检测出来,该方法为蛋白质酪氨酸磷酸化的分析提供了一种新的手段。     

Zirconium oxide aerogel for effective enrichment of phosphopeptides with high binding capacity

In this study, zirconium oxide (ZrO₂) aerogel was synthesized via a green sol–gel approach, with zirconium oxychloride, instead of the commonly used alkoxide with high toxicity, as the precursor. With such material, phosphopeptides from the digests of 4 pmol of β-casein with the coexistence of 100 times (mol ratio) BSA could be selectively captured, and identified by MALDI-TOF MS. Due to the large surface area (416.0 m² g⁻¹) and the mesoporous structure (the average pore size of 10.2 nm) of ZrO₂ aerogel, a 20-fold higher loading capacity for phosphopeptide, YKVPQLEIVPN[pS]AEER (MW 1952.12), was obtained compared to that of commercial ZrO₂ microspheres (341.5 vs. 17.87 mg g⁻¹). The metal oxide aerogel was further applied in the enrichment of phosphopeptides from 100 ng nonfat milk, and 17 phosphopeptides were positively identified, with a 1.5-fold improvement in phosphopeptide detection compared with previously reported results. These results demonstrate that ZrO₂ aerogel can be a powerful enrichment material for phosphoproteome study.     

Effect of surface modification on magnetization of iron oxide nanoparticle colloids

Magnetic iron oxide nanoparticles have numerous applications in the biomedical field, some more mature, such as contrast agents in magnetic resonance imaging (MRI), and some emerging, such as heating agents in hyperthermia for cancer therapy. In all of these applications, the magnetic particles are coated with surfactants and polymers to enhance biocompatibility, prevent agglomeration, and add functionality. However, the coatings may interact with the surface atoms of the magnetic core and form a magnetically disordered layer, reducing the total amount of the magnetic phase, which is the key parameter in many applications. In the current study, amine and carboxyl functionalized and bare iron oxide nanoparticles, all suspended in water, were purchased and characterized. The presence of the coatings in commercial samples was verified with X-ray photoelectron spectroscopy (XPS). The class of iron oxide (magnetite) was verified via Raman spectroscopy and X-ray diffraction. In addition to these, in-house prepared iron oxide nanoparticles coated with oleic acid and suspended in heptane and hexane were also investigated. The saturation magnetization obtained from vibrating sample magnetometry (VSM) measurements was used to determine the effective concentration of magnetic phase in all samples. The Tiron chelation test was then utilized to check the real concentration of the iron oxide in the suspension. The difference between the concentration results from VSM and the Tiron test confirmed the reduction of magnetic phase of magnetic core in the presence of coatings and different suspension media. For the biocompatible coatings, the largest reduction was experienced by amine particles, where the ratio of the effective weight of magnetic phase reported to the real weight was 0.5. Carboxyl-coated samples experienced smaller reduction with a ratio of 0.64. Uncoated sample also exhibits a reduction with a ratio of 0.6. Oleic acid covered samples show a solvent-depended reduction with a ratio of 0.5 in heptane and 0.4 in hexane. The corresponding effective thickness of the nonmagnetic layer between magnetic core and surface coating was calculated by fitting experimentally measured magnetization to the modified Langevin equation.     

Isolation of phosphopeptides using solid phase enrichment

Protein phosphorylations are post-translational protein modifications that are crucial for intercellular signal transduction and the regulation of many cellular events. We describe herein a novel technology utilizing α-diazo functionalized solid phase resins to isolate phosphorylated peptides from non-phosphorylated substrates.     

The influence of trace water concentration on iron oxide nanoparticle size

The size of iron oxide nanoparticles, prepared from the thermal decomposition of Fe(CO)(5) in a high boiling solvent in the presence of oleic acid, is affected by water concentration, giving particles from sizes of 5.6 nm to as low as 2.2 nm.     

Surface-mediated production of hydroxyl radicals as a mechanism of iron oxide nanoparticle biotoxicity

Emerging applications of nanosized iron oxides in nanotechnology introduce vast quantities of nanomaterials into the human environment, thus raising some concerns. Here we report that the surface of γ-Fe(2)O(3) nanoparticles 20-40 nm in diameter mediates production of highly reactive hydroxyl radicals (OH(?)) under conditions of the biologically relevant superoxide-driven Fenton reaction. By conducting comparative spin-trapping EPR experiments, we show that the free radical production is attributed primarily to the catalytic reactions at the nanoparticles' surface rather than being caused by the dissolved metal ions released by the nanoparticles as previously thought. Moreover, the catalytic centers on the nanoparticle surface were found to be at least 50-fold more effective in OH(?) radical production than the dissolved Fe(3+) ions. Conventional surface modification methods such as passivating the nanoparticles' surface with up to 935 molecules of oleate or up to 18 molecules of bovine serum albumin per iron oxide core were found to be rather ineffective in suppressing production of the hydroxyl radicals. The experimental protocols developed in this study could be used as one of the approaches for developing analytical assays for assessing the free radical generating activity of a variety of nanomaterials that is potentially related to their biotoxicity.     

Magnetic microspheres modified with Ti(IV) and Nb(V) for enrichment of phosphopeptides

Magnetic microspheres (Fe₃O₄) were coated with polydopamine (PDA) and loaded with the metal ions Ti(IV) and Nb(V) to give a material of type Fe₃O₄@PDA-Ti/Nb. It is shown to be useful for affinity chromatography and for enrichment of phosphopeptides from both standard protein solutions and real samples. For comparison, such microspheres loaded with single metal ions only (Fe₃O₄@PDA-Ti and Fe₃O₄@PDA-Nb) and their physical mixtures were also investigated under identical conditions. The binary metal ion-loaded magnetic microspheres display better enrichment efficiency than the single metal ion-loaded microspheres and their physical mixture. Both multiphosphopeptides and monophosphopeptides can be extracted. The Fe₃O₄@PDA-Ti/Nb microspheres exhibit ultra-high sensitivity (the lowest detection amount being 2 fmol) and selectivity at a low mass ratio such as in case of β-casein/BSA (1:1000).

Open image in new window

Graphical abstract Magnetic microspheres (Fe₃O₄) were coated with polydopamine (PDA) and loaded with the metal ions Ti(IV) and Nb(V) to give a material of type Fe₃O₄@PDA-Ti/Nb. Results showed its great potential as an affinity probe in phosphoproteome research due to rapid magnetic separation of phosphopeptides, ultrahigh sensitivity and selectivity, and remarkable reusability.

     

Assessing magnetic iron oxide nanoparticle properties under different thermal treatments

Journal of Thermal Analysis and Calorimetry - Magnetic nanoparticle structures have been examined as potential carrier vehicles and substrates in a wide range of applications where they undergo...     

Analysis of peptides and proteins affinity-bound to iron oxide nanoparticles by MALDI MS

Iron oxide nanoparticles modified with oleate have been employed for the extraction of peptides and proteins from aqueous solution before matrix-assisted laser desorption/ionization (MALDI) mass spectrometric (MS) analysis. Adsorption of peptides and proteins onto the nanoparticles were mainly through electrostatic attraction and hydrophobic interaction. The analyte-adsorbed iron oxide nanoparticles could be efficiently collected from solution using a magnet. No elution step was needed. With this preconcentration strategy, the lowest detectable concentration of angiotensin I, insulin, and myoglobin in 500 microL of aqueous solution were 0.1 nM, 0.1 nM, and 10.0 nM, respectively. In addition, the nanoparticles could extract the analytes from solution with a high content of salt and surfactant, thus eliminating suppression effect during MALDI MS analysis. This method was successfully applied to concentrate the tryptic digest products of cytochrome c. In addition, the tryptic digestion of cytochrome c can be directly conducted on the iron oxide nanoparticles.     

Magnetic fluid hyperthermia: focus on superparamagnetic iron oxide nanoparticles

Due to their unique magnetic properties, excellent biocompatibility as well as multi-purpose biomedical potential (e.g., applications in cancer therapy and general drug delivery), superparamagnetic iron oxide nanoparticles (SPIONs) are attracting increasing attention in both pharmaceutical and industrial communities. The precise control of the physiochemical properties of these magnetic systems is crucial for hyperthermia applications, as the induced heat is highly dependent on these properties. In this review, the limitations and recent advances in the development of superparamagnetic iron oxide nanoparticles for hyperthermia are presented.     

A hydrated amorphous iron oxide nanoparticle as active water oxidation catalyst

Developing efficient water oxidation catalysts (WOCs) with earth-abundant elements still remains a challenging task for artificial photosynthesis. Iron-based WOC is a promising candidate because it is economically cheap, little toxic and environmentally friendly. In this study, we found that the catalytic water oxidation activity on amorphous iron-based oxide/hydroxide (FeO_x) can be decreased by an order of magnitude after the dehydration process at room temperature. Thermogravimetric analysis, XRD and Raman results indicated that the dehydration process of FeO_x at room temperature causes the almost completely loss of water molecule with no bulk structural changes. Based on this finding, we prepared hydrated ultrasmall (ca. 2.2 nm) FeO_x nanoparticles of amorphous feature, which turns out to be extremely active as WOC with turnover frequency (TOF) up to 9.3 s^?1 in the photocatalytic Ru(bpy)₃²⁺-Na₂S₂O₈ system. Our findings suggest that future design of active iron-based oxides as WOCs requires the consideration of their hydration status.     

Magnetic control of bioelectrocatalytic processes based on assembled iron oxide particles

A facile magnetic control system was designed in bioelectrocatalytic process based on functionalized iron oxide particles. The iron oxide particles were modified with glucose oxidase, and ferrocene dicarboxylic acid was used as electron transfer mediator. Functionalized iron oxide particles can assemble along the direction of applied magnetic field, and the directional dependence of the assembled iron oxide particles can be utilized for device purposes. We report here how such functionalized magnetic particles are used to modulate the bioelectrocatalytic signal by changing the orientation of the applied magnetic field.     

多金属氧酸盐/壳聚糖磁性复合材料的制备及其用于磷酸化肽的富集

建立了一种基于多金属氧酸盐磁性材料富集磷酸化肽的方法。采用层层自组装技术制备多金属氧酸盐/壳聚糖磁性材料,结合基质辅助激光解吸电离飞行时间质谱（MALDI-TOF MS）检测手段,用于磷酸化肽的富集。该磁性材料具有快速磁响应、亲水性、正电性等优点,对磷酸化肽具有高的富集选择性。实验用β-酪蛋白作为模型蛋白质,通过富集后,方法的检出限为0.02 fmol,说明合成的磁性材料对微量蛋白样品分析具有很高的应用潜力。     

High-performance electrochemical sensor based on electrodeposited iron oxide nanoparticle: catecholamine as analytical probe

In this paper, we report the synthesis and electrocatalytic activity of electrodeposited Fe₂O₃ nanoparticles modified on a glassy carbon electrode as highly sensitive sensors for determination of catecholamines. Results showed that the Fe₂O₃ nanoparticles on a glassy carbon electrode exhibit excellent catalytic activity toward catecholamines oxidation, including levodopa, dopamine, and epinephrine, resulting in a marked lowering in the peak potential and considerable improvement of the peak current as compared to the electrochemical activity at the bare glassy carbon electrode. The electrochemical characterizations of catecholamines were performed using cyclic voltammetry, chronoamperometry, and differential pulse voltammetry techniques. The electrocatalytic currents increase linearly with the levodopa, dopamine, and epinephrine concentrations in the ranges of 0.0625–1000, 0.25–1500, and 0.125–1000 µM, respectively, and the detection limits (3σ) were 24 ± 2, 14 ± 2, and 12 ± 2 nM, respectively.     

Fragmentation of phosphopeptides by atmospheric pressure MALDI and ESI/ion trap mass spectrometry

An investigation of phosphate loss from phosphopeptide ions was conducted, using both atmospheric pressure matrix-assisted laser desorption/ionization (AP MALDI) and electrospray ionization (ESI) coupled to an ion trap mass spectrometer (ITMS). These experiments were carried out on a number of phosphorylated peptides in order to investigate gas phase dephosphorylation patterns associated with phosphoserine, phosphothreonine, and phosphotyrosine residues. In particular, we explored the fragmentation patterns of phosphotyrosine containing peptides, which experience a loss of 98 Da under collision induced dissociation (CID) conditions in the ITMS. The loss of 98 Da is unexpected for phosphotyrosine, given the structure of its side chain. The fragmentation of phosphoserine and phosphothreonine containing peptides was also investigated. While phosphoserine and phosphothreonine residues undergo a loss of 98 Da under CID conditions regardless of peptide amino acid composition, phosphate loss from phosphotyrosine residues seems to be dependent on the presence of arginine or lysine residues in the peptide sequence.     

Facile synthesis of alumina hollow spheres for on-plate-selective enrichment of phosphopeptides

Alumina hollow spheres were synthesized, spotted and sintered on a stainless-steel plate. These spots were used to selectively capture phosphopeptides from peptide mixtures and the captured target peptides could be analyzed by MALDI-MS. This provides a fast and efficient on-plate selective enrichment method for phosphopeptides investigation.     

Efficient enrichment and identification of phosphopeptides by cerium oxide using on-plate matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis

An efficient and simple method for enrichment and identification of phosphopeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) using cerium oxide is presented. After pretreatment of tryptic digests of phosphoproteins with CeO(2), nonphosphopeptides are discarded and phosphopeptides are enriched. By applying the separated CeO(2) on a target plate and analysis using MALDI-TOF MS, peaks of phosphopeptides and their correspondingly series of dephosphorylated peptides are observed in the mass spectra. Thus, the phosphopeptides are very easy to identify with the mass difference, which are all 80 Da between adjacent peaks in the same series, and clear background in the spectra owing to elimination of signal suppression from large amounts of nonphosphopeptides. Furthermore, the phosphopeptides can be dephosphorylated completely after a further NH(4)OH elution. Tryptic digest products from several standard proteins are pretreated using CeO(2) to demonstrate the efficiency of this method. Phosphopeptides from a very small quantity of human serum are enriched and analyzed, and proteins also identified by searching against a database using Mascot on MALDI-TOF/TOF fragments, which indicates that this method may be employed in complex samples for further application.     

Magnetic carbon nanocomposites as a MALDI co-matrix enhancing MS-based glycomics

Analytical and Bioanalytical Chemistry - More than 50% of all known proteins are glycosylated, which is critical for many biological processes such as protein folding and signal transduction....