Copolymerization of 4-cyclopentene-1,3-dione with p-chlorostyrene and vinylidene chloride

The copolymerization of 4-cyclopentene-1,3-dione (M₂) with p-chlorostyrene and vinylidene chloride is reported. The copolymers were prepared in sealed tubes under nitrogen with azobisisobutyronitrile initiator. Infrared absorption bands at 1580 cm.^?1 revealed the presence of a highly enolic β-diketone and indicated that copolymerization had occurred. The copolymer compositions were determined from the chlorine analyses and the reactivity ratios were evaluated. The copolymerization with p-chlorostyrene (M₁) was highly alternating and provided the reactivity ratios r₁ = 0.32 ± 0.06, r₂ = 0.02 ± 0.01. Copolymerization with vinylidene chloride (M₁) afforded the reactivity ratios r₁ = 2.4 ± 0.6, r₂ = 0.15 ± 0.05. The Q and e values for the dione (Q = 0.13, e = 1.37), as evaluated from the results of the vinylidene chloride case, agree closely with the previously reported results of copolymerization with methyl methacrylate and acrylonitrile and confirm the general low reactivity of 4-cyclopentene-1,3-dione in nonalternating systems.     

Copolymerization of 2-Hydroxypropyl Methacrylate with Alkyl Met hacrylates

2-Hydroxypropyl methacrylate (2-HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the Yezrielev, Brokhina, and Raskin method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are r₁ = 1.807 ± 0.032 and r₂ = 0.245 ± 0.021; with BMA (M₂) they are n = 2.378 ± 0.001 and r₂ = 0.19 ± 0.01; and with EHMA the values are r₁ = 4.370 ± 0.048 and r₂ = 0.103 ± 0.006. Since reactivity ratios are the measure of distribution of monomer units in copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end-uses.     

Determination of the reactivity ratios of methyl acrylate with the vinyl acetate,vinyl 2,2-dimethyl-propanoate,and vinyl 2-ethylhexanoate

The course of composition drift in copolymerization reactions is determined by reactivity ratios of the contributing monomers. Since polymer properties are directly correlated with the resulting chemical composition distribution, reactivity ratios are of paramount importance. Furthermore, obtaining correct reactivity ratios is a prerequisite for good model predictions. For vinyl acetate (VAc), vinyl 2,2-dimethyl-propanoate also known as vinyl pivalate (VPV), and vinyl 2-ethylhexanoate (V2EH), the reactivity ratios with methyl acrylate (MA) have been determined by means of low conversion bulk polymerization. The mol fraction of MA in the resulting copolymer was determined by ¹H-NMR. Nonlinear optimization on the thus-obtained monomer feed–copolymer composition data resulted in the following sets of reactivity ratios: r_MA = 6.9 ± 1.4 and r_VAc = 0.013 ± 0.02; r_MA = 5.5 ± 1.2 and r_VPV = 0.017 ± 0.035; r_MA = 6.9 ± 2.7 and r_V2EH = 0.093 ± 0.23. As a result of the similar and overlapping reactivity data of the three methyl acrylate–vinyl ester monomer systems, for practical puposes these data can be described with one set of reactivity data. Nonlinear optimization of all monomer feed–copolymer composition data together resulted in r_MA = 6.1 ± 0.6 and r_VEst = 0.0087 ± 0.023. © 1994 John Wiley & Sons, Inc.     

Copolymerization of 2-Hydtoxypropyl Methacrylate with Alkyl Methacrylates

2-Hydroxypropyl methacrylate (2 HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the YBR method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are: r₁=1.807 ± 0.032, r₂=0.245 ± 0.021; with BMA (M₂) they are r₁=2.378 ± 0.001, r₂=0.19 ± 0.01; and with EHMA the values are r₁=4.370 ± 0.048, r₂=0.103 ± 0.006. Since the reactivity ratios are the measure of distribution of monomer units in a copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end uses.     

A New Analytical Solution of the Binary Copolymer Composition Equation and Suggested Procedure for Deriving the Monomer Reactivity Ratios

Abstract

An absolute analytical procedure is found for obtaining the parameters of the differential, binary, copolymer composition equation, setting up a least-squares condition that places equal weight on all experimental lines of the Mayo-Lewis plot. The values of monomer reactivity ratios for the system ethyl methacrylate (M₁-vinylidene chloride (M₂), studied by Agron et al., are r₁ = 2.052 ± 0.043 and r₂ = 0.346 ± 0.052. These values, especially r₁, differ from the estimates by Agron et al. The new solution, however, appears to yield the estimate of maximum likelihood for the reactivity ratios based on the given experimental data.     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Monomer reactivity ratio and Q–e values for copolymerization of hydroxyalkyl acrylates and 2-(1-aziridinyl)ethyl methacrylate with styrene

Copolymers of 2-hydroxyethyl acrylate, hydroxypropyl acrylate, and 2(1-aziridinyl)-ethyl methacrylate (M₂) with styrene (M₁) were prepared in benzene solution at 60°C. Benzoyl peroxide, 0.1–0.2 mole-%, was used as initiator. Copolymer samples with the molar concentrations of M₂ feed ranging from 0.10 to 0.85 were used to determine the reactivity ratios. Elemental analysis and nuclear magnetic resonance spectroscopy (NMR) were used to determine copolymer compositions. There was a solubility problem when the latter technique was applied. When samples which were completely soluble were analyzed, the results obtained from NMR and elemental analysis were in excellent agreement. The monomer reactivity ratios and the corresponding parameters for the copolymerization of (M₁) with 2-hydroxyethyl acrylate are: r₁ = 0.38 ± 0.02, r₂ = 0.34 ± 0.03; Q₂ = 0.85, e₂ = 0.64; with hydroxypropyl acrylate are: r₁ = 0.45 ± 0.03, r₂ = 0.36 ± 0.03; Q₂ = 0.75, e₂ = 0.56; with 2(1-aziridinyl)ethyl methacrylate are: r₁ = 0.53 ± 0.02, r₂ = 0.63 ± 0.04; Q₂ = 0.82, e₂ = 0.25.     

Synthesis and copolymerization of fluorinated monomers bearing a reactive lateral group. XX. Copolymerization of vinylidene fluoride with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene

The radical copolymerization of vinylidene fluoride (VDF) with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene (C₄Br) was examined. This bromofluorinated alkene was synthesized in three steps, which started with the addition of bromine to chlorotrifluoroethylene. In contrast to the ethylenation of 1,1‐difluoro‐1,2‐dibromochlorethane, which failed, that of 2‐chloro‐1,1,2‐trifluoro‐1,2‐dibromoethane was optimized and led to 2‐chloro‐1,1,2‐trifluoro‐1,4‐dibromobutane. The kinetics of the copolymerization of VDF with this brominated monomer initiated by t‐butyl peroxypivalate led to an assessment of the reactivity ratios, r_VDF = 0.96 ± 0.67 and r_C4Br = 0.09 ± 0.63, at 50 °C. The suspension copolymerization was also carried out, and the chemical modifications of the resulting bromo‐containing poly(vinylidene fluoride)s were attempted and consisted mainly of elimination or nucleophilic substitution of the bromine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 917–935, 2005     

Kinetic Investigations of Self-Condensing Group Transfer Polymerization

Hyperbranched methacrylates were synthesized by Self-Condensing Group Transfer Polymerization (SCGTP) of 2-(2-methyl-1-triethylsiloxy-1-propenyloxy)ethyl methacrylate (MTSHEMA) and characterized by multi-detector SEC as well as quantitative ¹³C-NMR. Kinetic measurements revealed that side reactions limit the molecular weights and lower the polydispersity. A maximum degree of branching of DB ≈ 0.4 and a reactivity ratio, r = k _A/k _B = 18 ± 5, was determined.     

Radical copolymerization behavior of a highly fluorinated cyclic olefin with vinyl ether

The copolymerization of a highly fluorinated cyclic monomer, octafluorocyclopentene (OFCPE, M₁), with ethyl vinyl ether (EVE, M₂) was investigated with a radical initiator in bulk. Despite the poor homopolymerizability of each monomer, the copolymerization proceeded successfully, and the molecular weights of the copolymers reached up to more than 10,000. Incorporation of the OFCPE units into the copolymer led to an increase in the glass‐transition point. The copolymer composition was determined from ¹H NMR spectra and elemental analysis data. The molar fraction of the OFCPE unit in the copolymer increased and approached but did not exceed 0.5. The monomer reactivity ratios were estimated by the Yamada–Itahashi–Otsu nonlinear least‐squares procedure as r_1,OFCPE = ?0.008 ± 0.010 and r_2,EVE = 0.192 ± 0.015. The reactivity ratios clearly suggest that the copolymerization proceeds alternatively in the case of an excessive feed of OFCPE. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1151–1156, 2002     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Comparative recalculation of the monomer reactivity ratios in copolymerization for styrene and methyl methacrylate

The monomer reactivity ratios (MMRs) in radical copolymerization for styrene and methyl methacrylate were recalculated by five different methods using literature copolymerization data. The use of approximate 95% confidence limits and their visual inspection helps to separate possibly biased copolymer composition data. The recalculated mean MRR values were r₁ (styrene) = 0.501 ± 0.031 and r₂ = 0.472 ± 0.031. The results of the linear least-squares calculation procedures seldom approach the quality of the nonlinear least-squares analysis according to the method of Tidwell and Mortimer.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

Homo- and copolymerization of N-(2-thiazolyl)methacrylamide with different vinyl monomers: Synthesis,characterization, determination of monomer reactivity ratios and biological activity

N-(2-thiazolyl)methacrylamide (TMA) monomer was synthesized from 2-aminothiazole by two different methods. The homo- and copolymerization of this monomer with methyl methacrylate (MMA), styrene (St), acrylonitrile (AN), and vinyl acetate (VA) were performed in dimethyl formamide using 1 mol% AIBN at 70°C. The copolymerization behavior was studied in a wide composition interval with the mole fractions of TMA ranging from 0.1 to 0.7 in the feed. Characterization using FTIR and 1HNMR techniques confirmed the structure of the monomer and the prepared homo- and copolymers, but the copolymers compositions were determined from sulphur analysis. The monomer reactivity ratios were computed using Fineman and Ross and Kelen and Tüdös methods for the systems TMA-MMA, TMA-St, TMA-AN and TMA-VA and were found to be r ₁ = 0.59 ± 0.05, r ₂ = 2.72 ± 0.03; r ₁ = 0.39 ± 0.02, r ₂ = 0.90 ± 0.01; r ₁ = 0.77 ± 0.06, r ₂ = 1.99 ± 0.04 and r ₁ = 0.80 ± 0.08, r ₂ = 0.40 ± 0.05 respectively (r ₁ corresponds to monomer reactivity ratio of TMA). The Q and e values for TMA monomer were found to be 1.079 and ?0.054. The synthesized monomer and polymers were tested in vitro for biological activity against some microorganisms, using the disk diffusion technique. Generally, all the polymers were effective against the tested microorganisms, but their growth-inhibition effects varied.     

Homo‐ and Copolymerization of Phenacyl Methacrylate via the Atom Transfer Radical Polymerization Method

The homo‐ and copolymers via atom transfer radical (co)polymerization (ATRP) of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) and t‐butyl methacrylate (t‐BMA) was performed in bulk at 90°C in the presence of ethyl 2‐bromoacetate, cuprous(I)bromide (CuBr), and 2,2′‐bipyridine. The polymerization of PAMA was carried out at 70, 80, and 100°C. Also, free‐radical polymerization of PAMA was carried out at 60°C. Characterization using FT‐IR and ¹³C‐NMR techniques confirmed the formation of a five‐membered lactone ring through ATRP. The in situ addition of methylmethacrylate to a macroinitiator of poly(phenacyl methacrylate) [Mn=2800, Mw/Mn=1.16] afforded an AB‐type block copolymer [Mn=13600, Mw/Mn=1.46]. When PAMA units increased in the living copolymer system, the Mn values and the polydispersities were decreased (1.1<Mw/Mn<1.79). The monomer reactivity ratios were computed using Kelen‐Tüdös (K‐T), Fineman‐Ross (F‐R) and Tidwell‐Mortimer (T‐M) methods and were found to be r₁= 1.17; r₂= 0.76; r₁=1.16; r₂=0.75 and r₁=1.18; r₂=0.76, respectively (r₁=is monomer reactivity ratio of PAMA). The initial decomposition temperatures of the resulting copolymers were measured by TGA. Blends of poly(PAMA) and poly(MMA) obtained via the ATRP method have been characterized by differential thermal and thermogravimetric analyses.     

Polymerization behaviour of 2,5-dimethylene- 2,5-dihydrofuran

Spontaneous homopolymerization of 2,5-dimethylene-2,5-dihydrofuran (DDF) was studied. The polymerization rates in two different initial monomer concentrations of DDF were analyzed with the first-order and second-order kinetics, and the homopolymerization of DDF was found to obey the first-order kinetics. The Arrhenius plot of the apparent rate constants at 30, 40, 50, and 60° gave an overall activation energy of 68.0 kJ/mol for the polymerization of DDF. From the comparison of the apparent rate constants at –78° and the time (the so-called half-life time) to decrease in half the monomer concentration for DDF with the corresponding values for p-xylylene (QM), DDF was found to be a less reactive monomer than QM. The copolymerizations of DDF with vinyl monomers such as acrylonitrile (AN), α-chloroacrylonitrile (CIAN), diethyl fumarate (DEF), and fumaronitrile (FN) were carried out in chloroform at 50° in the presence of AIBN to obtain the monomer reactivity ratios r₁(DDF) = 30.0 ± 3.0 and r₂ (AN) = 0 for the DDF-AN system, r₁ (DDF) = 1.55 ± 0.2 and r₂(CIAN) = 0 for the DDF-CIAN system, r₁(DDF) = 3.88 ± 0.2 and r₂(DEF) = 0 for the DDF-DEF system, and r₁(DDF) = 2.41 ± 0.1 and r₂ (FN) = 0 for the DDF-FN system, respectively. As the monomer reactivity ratios of r₂ for all systems were zero, Q and e values of DDF were calculated from the combination of two r₁ (DDF) values of any two copolymerization systems to be the 7.64 to 6.63 ×10²¹ range for Q and the –0.70 to –6.31 range for e, indicating that DDF is a highly conjugative and electron-donating monomer. © 1995 John Wiley & Sons, Inc.     

Copolymerization of optically active N-bornylmaleimide with vinyl monomers

Optically active N-bornylmaleimide (NBMI) was copolymerized with styrene, methyl methacrylate, and vinylidene chloride with a free-radical catalyst to obtain optically active copolymers. The monomer reactivity ratios for the radical copolymerization of NBMI (M₂) with styrene, methyl methacrylate, and vinylidene chloride were: ST-NBMI, r₁ = 0.13, r₂ = 0.05; MMA-NBMI, r₁ = 2.02, r₂ = 0.16; VCl₂-NBMI, r₁ = 1.15, r₂ = 0.47. The Q-e values for NBMI were Q₂ = 0.48 and e₂ = +1.47. The specific rotation and optical rotatory dispersion of these copolymers were measured. The correlation between the specific rotation and composition of these copolymers was not linear. The value of λ_c for each copolymer was independent of the copolymer composition and the comonomer, being 260 mμ for the St-NBMI system, 262 mμ for the MMA-system, and 260 mμ for the VCl₂-NBMI system. The effects of solvents and temperature on the specific rotation of these copolymers were investigated.     

Emulsion copolymerization of styrene and methyl methacrylate

Chain transfer constants to monomer have been measured by an emulsion copolymerization technique at 44°C. The monomer transfer constant (ratio of transfer to propagation rate constants) is 1.9 × 10^?5 for styrene polymerization and 0.4 × 10^?5 for the methyl methacrylate reaction. Cross-transfer reactions are important in this system; the sum of the cross-transfer constants is 5.8 × 10^?5. Reactivity ratios measured in emulsion were r₁ (styrene) = 0.44, r₂ = 0.46. Those in bulk polymerizations were r₁ = 0.45, r₂ = 0.48. These sets of values are not significantly different. Monomer feed compcsition in the polymerizing particles is the same as in the monomer droplets in emulsion copolymerization, despite the higher water solubility of methyl methacrylate. The equilibrium monomer concentration in the particles in interval-2 emulsion polymerization was constant and independent of monomer feed composition for feeds containing 0.25–1.0 mole fraction styrene. Radical concentration is estimated to go through a minimum with increasing methyl methacrylate content in the feed. Rates of copolymerization can be calculated a priori when the concentrations of monomers in the polymer particles are known.