Low- and high-conversion studies of the free radical copolymerization of 2-hydroxyethyl methacrylate with styrene in N,N′-dimethylformamide solution

2-Hydroxyethyl methacrylate (HEMA) and styrene (S) have been copolymerized in a 3 mol · L⁻¹N,N′-dimethylformamide (DMF) solution using 2,2′azobis (isobutyronitrile) (AIBN) as an initiator over a wide composition and conversion range. From low-conversion experiments and ¹H-NMR analysis, the monomer reactivity ratios were determined according to the Mayo–Lewis terminal model. The comparison of the obtained results with those previously reported for copolymerization in bulk and in toluene reveals a relatively small but noticeable solvent effect that can be qualitatively explained by the bootstrap model. Cumulative copolymer composition as a function of conversion is satisfactorily described by the integrated Mayo–Lewis equation; overall copolymerization rate increases with increasing the HEMA/S ratio, and individual monomer conversion is closely related to the monomer molar fraction in the feed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2941–2948, 1999     

Fundamental investigations into the free‐radical copolymerization of N‐phenylmaleimide and norbornene

A fundamental investigation into the copolymerization of N‐phenylmaleimide and norbornene via conventional free‐radical polymerization techniques was conducted. Reaction conditions were optimized for molecular weight and percent yield by tuning overall concentration and initiator loading. The copolymerization kinetics were monitored using in‐situ, variable temperature nuclear magnetic resonance and first‐order behavior was observed with respect to each monomer. Although the related copolymerization of norbornene and maleic anhydride was well‐known to proceed in a perfectly alternating manner, the copolymerization of norbornene and N‐phenylmaleimide was found to deviate from strictly alternating copolymerization behavior, producing significant amounts of sequentially enchained N‐phenylmaleimide units within the polymeric backbone. This deviation from perfectly alternating behavior was confirmed by analysis of individual monomer conversion rates and by measurement of monomer reactivity ratios using the Mayo–Lewis graphical analysis method. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 985–991     

Solution copolymerization of styrene and 2-hydroxyethyl mechacrylate.

The rate of solution copolymerization of styrene (M₁) and 2-hydroxyethyl methacrylate (M₂) was investigated by dilatometry. N,N-dimethyl formamide, toluene, isopropyl alcohol, and butyl alcohol were used as solvents. Polymerization was initiated by α,α′-azobisisobutyronitrile at 60°C. The initial copolymerization rate increased nonlinearly with increasing 2-hydroxyethyl methacrylate (HEMA)/styrene ratio. The copolymerization rate was promoted by solvents containing hydroxyl groups. Two different approaches were used for the prediction of copolymerization rates. The relationships proposed for the copolymerization rates calculation involve the effects of the total monomer concentration, mole fraction of HEMA, and of the solvent type. Different reactivity ratios were found in polar and nonpolar solvents: r₁ = 0.53, r₂ = 0.59 in N,N-dimethyl formamide, isopropyl alcohol and n-butyl alcohol; r₁ = 0.50, r₂ = 1.65 in toluene. The usability of these reactivity ratios was confirmed by batch experiments.     

Nitroxide‐mediated free‐radical copolymerization of styrene with butyl acrylate

Controlled free‐radical copolymerization of styrene (S) and butyl acrylate (BA) was achieved by using a second‐generation nitroxide, N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (DEPN), and 2,2‐azobisisobutyronitrile (AIBN) at 120 °C. The time‐conversion first‐order plot was linear, and the number‐average molecular weight increased in direct proportion to the ratio of monomer conversion to the initial concentration, providing copolymers with low polydispersity. The monomer reactivity ratios obtained were r_S = 0.74 and r_BA = 0.29, respectively. To analyze the convenience of applying the Mayo–Lewis terminal model, the cumulative copolymer composition against conversion and the individual conversion of each monomer as a function of copolymerization time were studied. The theoretical values of the propagating radical concentration ratio were also examined to investigate the copolymerization rate behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4168–4176, 2004     

A study of the relative reactivity of maleic anhydride and some maleimides in free radical copolymerization and terpolymerization

Composition data for the free radical copolymerization of maleic anhydride with N-phenylmaleimide in toluene at 60°C have been obtained. Relative reactivity ratios in terminal and penultimate models using nonlinear least-squares optimization routine have been determined. The standard error was found to be somewhat smaller in the penultimate model, but is still larger than the uncertainty estimated for the copolymer composition. Terpolymers of maleic anhydride and styrene with maleimide, N-butylmaleimide, N-phenylmaleimide, and N-carbamylmaleimide were obtained. On the basis of analysis of the product composition at various monomer feeds the relative reactivity of maleic anhydride and maleimides in these reactions is compared and the influence of the structure of thesemonomers on the rate of some chain growth reactions is discussed.     

Alternating copolymerization of polar vinyl monomers in the presence of zinc chloride. I. Propagation and initiation of the copolymerization of acrylonitrile with styrene copolymer

Copolymerization of acrylonitrile with styrene spontaneously occurred on addition of zinc chloride without addition of any other radical initiator. The composition of the copolymer approached that of strictly alternating copolymer as zinc chloride added to the copolymerization system increased. The significance of the apparent monomer reactivity ratios of this copolymerization system was studied from a kinetic point of view, and it was shown that the monomer sequence distribution is indicated by the apparent monomer reactivity ratios. Further, equations which represent the relation between the apparent monomer reactivity ratios and Q,e values at a given salt concentration were derived. These equations reasonably accounted for the decrease of the apparent monomer reactivity ratios of the copolymerization of acrylonitrile with styrene in the presence of zinc chloride and the behavior of the other acrylonitrile copolymerization systems in the presence of zinc chloride. The initiation step of the spontaneous radical copolymerization of acrylonitrile with styrene in the presence of zinc chloride was explained by a cross-initiation mechanism.     

Preparation of high oxygen permeable transparent hybrid copolymers with silicone macro-monomers

In this study, high oxygen permeable transparent hybrid copolymers were prepared with hydrophilic monomer such as 2-hydroxyethylmethacrylate (HEMA) or N,N-dimethylacrylamide (DMAA) and mono- or difunctional silicone macro-monomer introduced methacryl groups. In HEMA-based hybrid copolymers, difunctional silicone macro-monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker were required in order to prepare transparent hybrid materials, while high transparent DMAA-based hybrid copolymers could be prepared without EGDMA cross-linker. The polymerization kinetics investigation revealed that this difference between HEMA and DMAA in preparation condition to transparent hybrid material originated to monomer reactivity in copolymerization and DMAA showed high reactivity compared with HEMA. Moreover, DMAA-based hybrid copolymers indicated high water content and high oxygen permeability as against HEMA-based hybrid copolymers because of its low cross-linking density.     

Water-Soluble imide-amide copolymers. III. Preparation and characterization of poly (acrylamide-co-N,N-diallylaniline) and poly (acrylamide-co-sodium N,N-diallylsulfanilate)

N,N-diallylaniline monomer was prepared in good yields, for use in preparation of homopolymer and for copolymerization with acrylamide. Functionalized N,N-diallylaniline monomer, as sodium N,N-diallylsulfanilate, was also prepared in good yields for copolymerization with acrylamide. Both monomers were fully characterized by elemental analysis, IR, and NMR. Poly (N,N-diallylaniline) was obtained by polymerization of a strongly acidic aqueous solution of N,N-diallylaniline initiated with hydrogen peroxide. Spectroscopic data from this homopolymer was used to facilitate spectral assignments of the new copolymers. Copolymers of acrylamide with N,N-diallylamine were prepared at monomer feed ratios of 10, 20, and 30 mol % amine and gave 3.5, 7.4, and 8.9 mol % incorporation, respectively. Similar diallyl monomer incorporation rates were obtained for the copolymerization of sodium N,N-diallylsulfanilate with acrylamide. With 10, 30, and 50 mol % of the sodium salt relative to acrylamide, 3.9, 8.4, and 19.2 mol % incorporation of the diallyl monomer was obtained.     

Peculiarities of N-vinylpyrrolidone copolymerization with vinyl acetate in the presence of tributylborane and 1,4-benzoquinone

Copolymerization of N-vinylpyrrolidone with vinyl acetate in the presence of tributylborane and 1,4-benzoquinone has been investigated. The curves of copolymer composition and relative reactivity of monomers were obtained. An introduction of tributylborane in the monomer mixture leads to the formation of complex with N-vinylpyrrolidone. Molecular weight of the copolymers and the rate of the copolymerization decreases with the addition of tributylborane and 1,4-benzoquinone compare to conventional copolymerization initiated by dicyclohexyl peroxydicarbonate. The curve of the copolymer composition acquires an S-shape. Triad composition of the copolymers differs from the theoretical values. The reason for the observed pheno mena is realization of the effect of preferential solvation (bootstrap-effect).

     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. III. Effect of salt on cationic copolymerization of styrene derivatives with vinyl ethers by acetyl perchlorate

A common-ion salt, tetra-n-butylammonium perchlorate, was found to affect the monomer reactivity ratios in the cationic copolymerization by acetyl perchlorate of styrene with p-methylstyrene and of 2-chloroethyl vinyl ether with p-methylstyrene, but not those for the copolymerization of 2-chloroethyl vinyl ether with isobutyl vinyl ether. In the copolymerization of p-methylstyrene with styrene or with 2-chloroethyl vinyl ether, the addition of the common-ion salt in a polar solvent shifted the monomer reactivity ratios to those in a less polar solvent. The molecular weight distribution analysis of the copolymer suggested that the addition of the common-ion salt depresses the dissociation of propagating species. Therefore, it was concluded that a propagating species with a different degree of dissociation shows a different relative reactivity towards two monomers. The nature of propagating species was also discussed on the basis of the common-ion effect on the monomer reactivity ratios in various solvents.     

Effects of temperature on styrene–methacrylonitrile copolymerization

The free-radical copolymerization of styrene and methacrylonitrile was studied in toluene solution at 60, 90, and 120°C. Copolymer composition was estimated from gas-chromatographic measurement of unreacted monomer concentrations. Reactions were carried to about 20% conversion to minimize analytical errors. Reactivity ratios were calculated by using an integrated form of the Mayo-Lewis simple copolymerization equation. Reactivity ratios were not sensitive to reaction temperature. The values at 90°C are r₁ = 0.41 (methacrylonitrile) and r₂ = 0.37 (styrene). The r₁ values are higher than those reported by other workers, presumably because of advantages in the present analytical technique and calculation method. The negligible temperature dependence of reactivity ratios is in accord with theory. If monomer pairs exhibit pronounced dependence of reactivity ratios on polymerization temperature, this may indicate a change in mode of placement of units in the polymer chain.     

Free-radical polymerization in micellar media: Effect of microenvironment

A micellar polymerization process has been used to prepare polyacrylamide or poly(acrylic acid) hydrophobically modified with low amounts (1–5 mol%) of an N-alkyl- or N-alkylarylacrylamide. The effect of the initial monomer segregation on the copolymer microstructure and the copolymerization mechanism has been investigated. This method leads generally to multiblock copolymers in which the number and length of the hydrophobic blocks vary with the initial number of hydrophobes per micelle. Interestingly, the copolymerization of acrylamide with disubstituted acrylamides leads to homogeneous samples with an average copolymer composition independent of the degree of conversion, in contrast to what is observed with monosubstituted acrylamides for which a drift in composition is observed. The difference in polarity between the bulk phase and the micellar phase is responsible for this behavior. This microenvironment effect modifies the reactivity ratios of those hydrophobes capable of forming hydrogen bonds, whereas the reactivity of the other hydrophobes remains unaffected.     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Fundamental Aspects of Measuring Copolymerization Reactivity Ratios Using Real-Time FTIR Monitoring

Real-time FTIR is a powerful tool to obtain copolymerization reactivity ratios because it allows simultaneous monitoring of individual monomer consumption rates. Based on the Mayo-Lewis equation we showed that in reactivity ratios can be defined as the ratios of apparent rate constants of monomer consumption. The validity and limitations on this new method are discussed in the isobutylene-isoprene and isobutylene-styrene carbocationic copolymerization systems.     

Alternating Copolymerization of Styrene and N-(4-Bromophenyl)Maleimide

Abstract

Free radical copolymerization of styrene (St) and N(4-bro-mophenyl)maleimide (4BPMI) in dioxane solution gave an alternating copolymer in all proportions of feed comonomer compositions. The monomer reactivity ratios were found to be r ₁, = 0.0218 ± 0.0064 (St) and r ₂, = 0.0232 ± 0.0112 (4BPMI), and the activation energy of the copolymerization reaction for the equimolar ratios of comonomer was E _a, = 51.1 kJ/mol. The molecular weights of the copolymers obtained are relatively high, the T _g's showed similar values (490 K), and the thermal stability is higher than that of polystyrene. The initial rate of copolymerization depends on the total concentration of the comonomers and the maximum occurred at higher 4BPMI mol fractions; however, the overall conversion is highest at equimolar comonomer composition. It has been shown that a charge-transfer complex participates in the process of copolymerization. The initial reaction rate was measured as a function of the monomer molar ratios, and the participation of the charge-transfer complex monomer and the free monomers was quantitatively estimated.     

Ionic Copolymerizations

It is shown that for the reported instances of “random” copolymerization in cationic systems, N values related to relative reactivity may be derived for monomers. The N values approximate reasonably well the values of the function, exp (-e) - 1.23, where e is the polarity e of the Q-e scheme for free-radical copolymerizations.

In a recent paper [1] it was shown that for the reported instances [2-4] of “random” copolymerization (r₁,r₂ = 1) in cationic systems, N values, related to relative reactivity, might be derived for monomers, employing styrene as a base monomer (N = 1). Thus d[M₁]/d[M₂] =N₁[M₁]/N₂[M₂] (1)

where d[M₁]/d[M₂] is the instantaneous copolymer composition, [M₁]/[M₂] is the ratio of unreacted monomers, and N₁ and N₂ are parameters related to general monomer reactivity of monomers 1 and 2, respectively, in cationic copolymerization.     

A novel synthetic procedure of vinylacetamide and its free radical polymerization

The pyrolysis of N-(α-methoxyethyl) acetamide, which was obtained by one-step reaction of acetamide, acetaldehyde, and methanol, gave N-vinylacetamide (NVA) in a good yield. The polymerizability and copolymerizability of NVA were studied. Free radical polymerization was carried out in the presence of radical initiator or by γ-ray irradiation. The monomer reactivity ratios of NVA were estimated in the copolymerization with acrylamide, vinyl acetate, and methyl methacrylate. The solvents were found to influence the monomer reactivity ratio. NVA showed a typical copolymerizability as nonconjugated vinyl monomer, and Q and e values were obtained in DMF as 0.16 and ?1.57, respectively.     

Synthesis and polymerization studies of N-cyanomethanimine monomers

New imine monomers containing C-aryl and N-cyano substituents were synthesized and polymerized by both radical and anionic initiation. Homopolymerization yielded low molecular weight polymers (M_n < 2100). Higher yields were obtained with anionic initiation rather than radical initiation. Radical initiated copolymerization with p-methoxystyrene gave low yields of low molecular weight copolymers. Radical initiated copolymerization with methyl acrylate gave copolymers of 15,000–,32,000 molecular weight in moderate yields, but with rather low incorporation of the imine monomer. The C-substituent affected the anionic and free radical reactivity similarly. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2703–2710, 1997     

Effects of solvent on the free-radical copolymerizabilities of pyridazinones with styrene

Free-radical copolymerizations of N-methylpyridazinone (I) and N-phenylpyridazinone (II) with styrene (M₁) were carried out in various solvents. The copolymerization rates were found to increase linearly with increasing viscosities of the reaction mixtures. Monomer reactivity ratios were strongly affected by the reaction media. This might be due to solvation of the carbonyl group of the pyridazinone ring, because linear relationships between log 1/r1 and vc=o of the pyridazinones were obtained. It was also found that monomer concentration influences these copolymerizabilities.     

A novel synthesis of semitelechelic functional poly(methacrylate)s through an alcoholate initiated polymerization. Synthesis of poly[2-(N,N-diethylaminoethyl) methacrylate] macromonomer

Potassium alcoholate was found to initiate the anionic polymerization of 2-(N,N-diethylaminoethyl) methacrylate (AMA) to form poly[2-(N,N-diethylaminoethyl) methacrylate] (PAMA). The molecular weight of the polymers was controlled by the monomer-initiator ratio with a narrow molecular weight distribution. Increased reactivity of the initiator by chelation of the monomer to the cation may be important for the polymerization. Using potassium (4-vinylbenzyl) alcoholate as an initiator, PAMA having a vinylbenzyl group was prepared which is a macromonomer having pH sensitive amino groups in each monomeric unit. By radical copolymerization with styrene, the PAMA macromonomer was incorporated as a graft chain.