Synthesis of poly-2-oxazolidones from diisocyanates and diepoxides

Poly-2-oxazolidones of high molecular weight have been synthesized from diisocy anates and diepoxides. The synthetic method was first developed for the model compound 3-phenyl-5-phenoxymethyl-2-oxazolidone prepared from phenyl isocyanate and phenyl glycidyl ether. Conditions found most suitable for a high yield involve slow addition of isocyanate to a solution of epoxide and catalyst, temperatures of 160°C or higher, and a catalytic amount of n-butoxylithium in 1-butanol. The same procedure was used to prepare high molecular weight poly-2-oxazolidones. The polymer structure was confirmed by infrared spectroscopy and elemental analysis. All polymers prepared were of sufficient molecular weight to be compression molded. The bulk mechanical properties characterize poly-2-oxazolidones as potentially useful engineering thermoplastics. A mechanism for oxazolidone formation is proposed.     

N-p-toluenesulfonyl-2-oxazolidones Via the cycloaddition reaction of p-tolucnesulfonyl isocyanate and epoxides

The reaction of styrene oxide and phenyl glycidyl ether with p-toluenesulfonyl isocyanate, employing a hydrocarbon-soluble adduct of tributylphosphine oxide and lithium bromide as catalyst, results in excellent yields of the N-p-toluenesulfonyl-2-oxazoIidones. The 5-isomeric-2-oxazolidone is obtained from phenyl glycidyl ether, but in contrast to conventional isocyanates, the p-toluenesulfonyl isocyanate, upon reaction with styrene oxide, produces the 4-isomeric 2-oxazolidone as the major product. The effect of the N-sulfonyl group on the nmr spectra of 2-oxazolidones is discussed.     

Mass spectral structure elucidation of substituted 4-oxazolidones,the photocycloexpansion products of 2,4-azetidindiones

Abstract-2-Methoxy-4-oxazolidone structures are assigned to the photocycloexpansion products of the substituted 2,4-azetidindiones on the basis of mass spectral evidence. A discussion is given of the mass spectra of 2-methoxy-4-oxazolidones and of their hydrolysis products, the 2-hydroxy-4-oxazolidones and the ring opened substituted 2-hydroxy-N-formyl acetamides. Ring and chain forms, when both isolated, yield completely different mass spectra, indicating that no rapid tautomeric equilibrium is established in the gas phase.     

Synthesis and characterization of N-phenylated aromatic polyureas from dianilino compounds and aromatic diisocyanates

N-phenylated aromatic polyureas were synthesized by the polyaddition of dianilino compounds to aromatic diisocyanates in sym-tetrachloroethane at around 100°C. Factors that influence the reaction, such as monomer concentration, reaction solvent, catalyst, temperature, and time, were studied to optimize the conditions for the preparation of high molecular weight polymers. Compared with the analogous unsubstituted aromatic polyureas, the N-phenylated polyureas were almost amorphous and soluble in a variety of solvents and had low glass transition temperatures. Some of the polymers could be cast into transparent flexible films from chloroform solutions.     

Polyhydrazides. IV. Preparation and properties of poly-N-ethyl- and isopropylhydrazide oxadiazoles

High molecular weight poly-N-alkylhydrazide-oxadiazoles have been prepared in poly-phosphoric acid by alkylation of poly-1,3,4-oxadiazole which was synthesized from terephthalic acid and hydrazine sulfate. Various kinds of reagents having an alkoxy group were used as alkylating agent, and N-ethylated and N-propylated polyhydrazides containing oxadiazole units were obtained. The thermal properties of the polymers obtained were investigated by using infrared spectroscopy, viscometry, differential thermometric and thermogravimetric techniques. Soluble poly-N-alkylhydrazide-oxadiazole are thermally cyclized to poly-1,3,4-oxadiazole with elimination of olefins and water at 226–330°C for propylated polydrazide and at 240–360°C for ethylated polyhydrazide. For both, weight loss in polyhydrazides occurs in two distinct stages corresponding, respectively, to cyclization and decomposition of the poly-1,3,4-oxadiazole formed in situ.     

Synthesis and characterization of new aromatic polyesters and polyethers derived from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene

New polyarylates and aromatic polyethers were synthesized from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene, and aromatic dicarboxylic acid chlorides and aromatic dihalides, respectively. The polyarylates having inherent viscosities of 0.28–1.05 dL/g were synthesized by either the two-phase method or the high-temperature solution method. All the polymers were easily soluble in N-methyl-2-pyrrolidone, N,N-dimethylformamide, pyridine, m-cresol, 1,4-dioxane, and 1,1,2,2-tetrachloroethane. They have glass transition temperatures in the range of 217–250°C and showed no weight loss below 315°C in both air and nitrogen atmospheres. Aromatic polyethers with inherent viscosities of 0.85–1.21 dL/g were obtained by the polycondensation of 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene and aromatic difluorides in the presence of potassium carbonate. These polymers having glass transion temperatures of 193–220°C were also soluble in the aforementioned solvents and stable up to around 350deg;C in both atmospheres. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of silicon-containing phenylated soluble aramids

New high molecular weight (inherent viscosities, 1.21–0.50 dL/g) aramids having silicon and pendant phenyl groups were synthesized by low temperature interfacial polycondensation technique involving the reaction of acid chlorides: bis(4-chlorocarbonylphenyl)dimethylsilane and bis(3-chlorocarbonylphenyl)dimethylsilane with diamines: 2,5-bis(4-aminophenyl)-3,4-diphenyl-thiophene and bis(4-aminophenyl)ether. Copolyamides were obtained by using different proportions of these diamines. All the polymers were completely soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and N,N-dimethylformamide. Thermal properties were evaluated by thermogravimetry which showed no weight loss below 325°C in both air and nitrogen atmospheres.     

Synthesis and properties of polyurethanes derived from bis-N-hydroxyimides and diisocyanates

Polyurethanes were synthesized by polyaddition reaction of bis-N-hydroxyimides and diisocyanates. The reactions were carried out in an aprotic polar solvent such as dimethylacetamide or N-methyl-2-pyrrolidone, and the polymers with inherent viscosities of up to 1.32 dl/g were obtained. These polyurethanes were found to exhibit high reactivity toward nucleophiles such as water and amines, which brought about rapid reduction of viscosity. The stabilities against heat and exposure to sunlight were also studied.     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of novel poly(amide-imide)s containing hexafluoroisopropylidene linkage

A series of novel soluble poly(amide-imide)s were prepared from the diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimidyl]hexafluoropropane, with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone containing CaCl₂ using triphenyl phosphite and pyridine as condensing agents. All the polymers were obtained in quantitative yields with inherent viscosities of 0.78–1.63 dL g⁻¹. The polymers were amorphous and readily soluble in aprotic polar solvents such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethyl sulfoxide as well as in less polar solvents such as pyridine and γ-butyrolactone, and also in tetrahydrofuran. The polymer films had tensile strength of 84–129 MPa, an elongation at break range of 6–22%, and a tensile modulus range of 2.0–2.7 GPa. The glass transition temperatures of the polymers were determined by DSC method and they were in the range of 240–282°C. These polymers were fairly stable up to a temperature around or above 400°C, and lose 10% weight in the range of 450–514°C and 440–506°C in nitrogen and air, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2629–2635, 1999     

Reactivity ratio of novel acrylic copolymer by NMR spectroscopy

The monomer 4-methylcoumarylacrylate (4-MCA) was synthesized from 7-hydroxy-4-methylcoumarin and characterized by conventional methods. Homo and copolymers of 4-methylcoumarylacrylate and styrene were synthesized with different feed ratios using N,N-dimethylformamide (DMF) as a solvent and 2,2′-azobisisobutyronitrile as an initiator at 70°C.The resulting polymers were characterized by infrared spectroscopy. Copolymer compositions were determined by nuclear magnetic resonance spectroscopy. The monomer reactivity ratios were determined by applying the conventional linearization method of Fineman–Ross and Kelen–Tudos. The reactivity ratios values of 4-methylcoumarylacrylate and styrene obtained from F–R plot are 1.36 and 0.62, respectively, and from K–T plot 1.24 and 0.58, respectively.     

Synthesis and properties of novel poly(N-oxyimide)s

Novel poly(N-oxyimide)s (PNOI) were synthesized by the room temperature polycondensation of N,N′-dihydroxypyromellitimide (I) with dichloro compounds in N,N-dimethylformamide (DMF) in the presence of triethylamine both as base as well as catalyst. The dichloro compounds used were 1,4-bis(chloromethyl)-2,5-dimethylbenzene (II), 1,5-bis(chloromethyl)-2,4-dimethylbenzene (III), 1,4-bis(chloromethyl)-2,5-dimethoxybenzene (IV) and 1,4-dichlorobut-2-yne (V). Polymer synthesis, characterization, and properties such as density, viscosity, solubility, crystallinity, and thermal stability were described. Two model compounds, viz. (i) MNOI-1 from N-hydroxyphthalimide and a dichloro compound (III), (ii) MNOI-2 from I and benzyl chloride were also synthesized to confirm the formation of polymers. The polymers thus obtained had high intrinsic viscosities in the range 1.09–1.18 dl/g. The thermal decomposition of the polymers started around 260°C with 20–25% decomposition and about 50% weight loss was observed at 400°C.     

Dynamic mechanical relaxation effects in some poly(arylene sulfones)

Poly-4,4′-oxydiphenylenesulfonyl and poly-4,4′-methylenediphenylenesulfonyl were synthesized by an electrophilic substitution polymerization of the arylene monosulfonyl chloride monomers. The glass-transition temperatures T_g of these polymers were determined by calorimetric and dynamic mechanical measurements, and the number-average molecular weights were determined by vapor-pressure osmometry. Both polymers were found to have the same T_g at equivalent molecular weight; the limiting value at high molecular weight is 238°C. Both polymers have two dynamic mechanical relaxation peaks at temperatures far below T_g. One is in the neighborhood of 0°C, and the other is at ?110°C. Plausible origins for these relaxations, and the absence of any near 0°C in poly(4,4′-isopropylidenediphenylene-co-4,4′-sulfonyldiphenylene dioxide), are discussed.     

Liquid 2-oxazolidones. I. Dielectric constants,viscosities, and other physical properties of several liquid 2-oxazolidones

Eight derivatives of 2-oxazolidone,, have been synthesized by the Homeyer method and purified by fractional freezing or fractional distillation to obtain low-conducting liquids. Dielectric constants, viscosities, densities, and refractive indices of these 2-oxazolidones have been determined at several temperatures within the range 25 to 75°C. Values for activation energies of viscous flow also have been calculated. The isomeric 3-methyl and 5-methyl derivatives of 2-oxazolidone have high dielectric constants which differ only slightly from that of water. The 3-substituted (or N-substituted) 2-oxazolidones exhibit the most favorable combination of physical properties, stability, and ease of purification and appear to have excellent potential as new nonaqueous solvents.Based on a portion of the Ph. D. dissertation of H. L. Huffman, Jr., University of Kentucky, 1972. Presented in major part at the 21 st Southeastern Regional Meeting of the American Chemical Society, Richmond, Virginia, 1969.     

Synthesis,characterization, and chiroptical property of optically active poly(urea-urethane)s

Five new optically active poly(urea-urethane)s were synthesized by solution polyaddition of (1S,2S)-(+)-2-amino-3-methoxy-1-phenyl-1-propanol ( 4 ) with diisocyanates (diphenylmethane-4,4′-diisocyanate, toluene-2,4-diisocyanate, hexamethylene diisocyanate, isophorone diisocyanate, m-xylylene diisocyanate) at 80°C for 60 h. In some cases, the reaction mixture transformed into a gel when cooled to room temperature. The reduced viscosities are between 0.14 and 0.63 dL/g depending on the solvents and diisocyanates. Thermal behaviors of these polymers were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The T_g and crystallization temperature (T_c) were in the range of 80–200°C and 220–238°C, respectively. Thermal decomposition started at about 275°C, and the residual weights at 400°C were 15–60% depending on the polymers. The conformation of the polymers in film state was studied by circular dichroism (CD) spectra, by comparison with the corresponding model compounds which were synthesized from 4 and phenyl isocyanate or propyl isocyanate. Polymers derived from aromatic diisocyanates formed as ordered conformation in the film state, while those from aliphatic diisocyanates did not. After packing as chiral stationary phases of high-performance liquid chromatography (HPLC), the polymers showed selective resolution to trans-stilbene oxide and trans-1,2-cyclopentanedicarboxanilide. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of polyimides,polyamides and poly(amide-imide)s from ether diamine having the spirobichroman structure

A novel spirobichroman unit containing dietheramine, 6,6′-bis(4-aminophenoxy)-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman ( 3 ), was prepared by the nucleophilic substitution of 6,6′-dihydroxy-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman with p-chloronitrobenzene in the presence of K₂CO₃ followed by hydrazine catalytic reduction of the intermediate dinitro compound. A series of polyimides were synthesized from diamine 3 and various aromatic dianhydrides by a conventional two-stage procedure through the formation of poly(amic-acid)s followed by thermal imidization. The intermediate poly(amic-acid)s had inherent viscosities of 1.00–2.78 dL/g. All the poly-(amic-acid)s could be thermally cyclodehydrated into flexible and tough polyimide films, and some polyimides were soluble in polar solvents such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF). These polyimides had glass transition temperatures (T_g) in the range of 236–256°C, and 10% weight loss occurred up to 450°C. Furthermore, a series of polyamides and poly(amide-imide)s with inherent viscosities of 0.71–2.29 dL/g were prepared by direct polycondensation of the diamine 3 with various aromatic dicarboxylic acids and imide ring-containing dicarboxylic acids by means of triphenyl phosphite and pyridine. All the polyamides and poly(amide-imide)s were readily soluble in polar solvents such as DMAc, and tough and flexible films could be cast from their DMAc solutions. These polymers had glass transition temperatures in the range of 137–228°C and 10% weight loss temperatures in the range of 419–443°C in air and 404–436°C in nitrogen, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1487–1497, 1997     

Synthesis and characterization of new poly(amide–imide)s from 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene with various diamines

New poly(amide–imide)s were prepared from a diimide–dicarboxylic acid, 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene ( BTTB ), with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. The new diimide–dicarboxylic acid BTTB containing an ether linkage and tert-butyl substituent was synthesized by the condensation reaction of 1,4-bis(4-aminophenoxy)-2-tert-butylbenzene with trimellitic anhydride. All the polymers were obtained in quantitative yields with inherent viscosities of 0.62–1.06 dL g⁻¹. The polymers were amorphous, and most of them were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF), as well as in less polar solvents such as dimethyl sulfoxide (DMSO), m-cresol, pyridine, and γ-butyrolactone, and also even in tetrahydrofuran. The glass transition temperatures of the polymers were determined by DSC method, and they were in the range of 238–279°C. These polymers were stable up to 408–449°C in air and 451–483°C in nitrogen and lose 10% weight in the range of 479–525°C in air and 480–528°C in nitrogen atmosphere. The polymer films had a tensile strength range of 71–115 MPa, an elongation at break range of 4–14%, and a tensile modulus range of 2.3–3.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2301–2307, 1998     

Synthesis and radical polymerization of vinyl monomers having oxazolidone moiety

Oxazolidone group-containing vinyl monomers, 4-(2-oxo-3-oxazolidinyl)methylstyrene (OS) and 4-[2-(2-oxo-3-oxazolidinyl)ethoxy]methylstyrene (OES), were synthesized and their polymerization and copolymerization behaviors with styrene (St), p-methoxystyrene (PMS), and m-hydroxystyrene (MHS) were investigated. OS was prepared in 70% yield by the reaction of 2-oxazolidone with p-chloromethylstyrene in the presence of sodium hydride. OES was obtained by the similar reaction of p-chloromethylstyrene with N-hydroxyethyl-2-oxazolidone which was prepared by the reaction of 2-oxazolidone with ethylenecarbonate. Homopolymerization of OS and OES afforded mainly gelled polymers, but also soluble polymers on high dilution. In the copolymerization with styrene derivatives, an alternating nature was suggested from the copolymerization parameters obtained by either the nonlinear least-squares analysis method or the Fineman–Ross method. The alternating copolymerizability decreased in the following order: MHS > PMS > St. Q?e values of OS and OES were calculated and demonstrated that OS and OES behaved as stronger electron-accepting monomers in the copolymerization with MHS than in those with St and PMS. The copolymerization behavior of OS (OES) with MHS was compared with those of 4-(2-oxo-1-pyrrolidinyl)methylstyrene (PS) and 4-[2-(2-oxo-1-pyrrolidinyl)ethoxy]methylstyrene (PES). From an IR study examining the shift of carbonyl absorption by addition of MHS, the interaction which contributed to the increase of the alternating copolymerizability in the copolymerization of OS (OES) with MHS was concluded to be based on hydrogen bonding. © 1993 John Wiley & Sons, Inc.     

Homopolymerization of 2-alkyl- and 2-aryl-2-oxazolines

2-Aryl- and 2-alkyl-2-oxazolines have been polymerized to poly-(N-aroyl)aziridines and poly(N-acyl)aziridines, respectively, in the presence of boron trifluoride. The polymers obtained were glassy, light yellow resins with molecular weights ranging from 3500 to 7500 (35–50 oxazoline units per chain). The polymerization rates have been determined for several of these monomers. A polymerization mechanism is proposed.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.