Polymerization of coordinated monomers. IV. Copolymerization of methyl methacrylate– and methacrylonitrile–Lewis acid complexes with styrene

Complexes of methyl methacrylate and methacrylonitrile with Lewis acids (SnCl₄, AlCl₃, and BF₃) were copolymerized with styrene at ?75°C under irradiation with a high-pressure mercury lamp in toluene solution. The resulting copolymers consisted of equimolar amount of methyl methacrylate or methacrylonitrile and styrene, regardless of the molar ratio of monomers in the feed. NMR spectroscopy showed the copolymers to have an alternate sequence. The tacticities of the copolymers varied with the complex to have an alternate sequence. The tacticities of the copolymers varied with the complex species: the copolymer from the SnCl₄ complex system had a higher cosyndiotactieity, while those from the AlCl₃ and the BF₃ complex systems showed coisotacticity to predominate over cosyndiotacticity. NMR spectroscopic investigation of the copolymerization system indicated the presence of a charge-transfer complex between the styrene and the methyl methacrylate coordinated to SnCl₄. The concentration of the charge-transfer complex was estimated to be about 30% of monomer pairs at ?78°C at a 1:1 molar ratio of feed. The growing end radicals were identified as a methyl methacrylate radical for the AlCl₃ complex–styrene system and a styrene radical for the SnCl₄ complex–styrene system by the measurement of the ESR spectra of the copolymerization systems under or after irradation with a high-pressure mercury lamp. The tacticity of the resulting polymer appears to be controlled by the structure of the charge transfer complex. In the case of the SnCl₄ complex a certain interaction of SnCl₄ with the growing end radical seems to be a factor controlling the polymer structure. These copolymerizations can be explained by an alternating charge-transfer complex copolymerization scheme.     

Polymerization of coordinated monomers. I. Stereoregulation in the free-radical polymerization of methyl methacrylate-zinc chloride or methyl methacrylate–stannic chloride complexes

Stereoregulation in free-radical polymerization was studied for the polymerization of the 2:1 or 1:1 complex of methyl methacrylate with ZnCl₂ or SnCl₄. The complexes were polymerized with the use of a free-radical initiator or γ-ray irradiation either in the liquid or solid state at various temperatures ranging from ?196 to 110°C, and the tacticities of the resulting polymers were determined by NMR spectroscopy. The polymers had different and characteristic values of tacticities depending upon the complex species, i.e., the kind of metal chloride and the stoichiometry. The tacticities were found to be independent of the polymerization temperature in both the liquid and solid states, in contrast with the fact that tacticities of the polymer from pure monomer changed markedly with the temperature. A temperature dependence appeared in the polymerization system, which contained more monomer than that corresponding to the 2:1 complex. The effect of the viscosity or the solid phase on the stereoregulation was examined in comparison with the polymerization of a mixture of methyl methacrylate and liquid paraffin. Two possible explanations regarding the stereoregulation mechanism are offered in relation to the structures of the complexes.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Polymerization of coordinated monomers. II. Stereoregulation in the free-radical polymerization of methacrylonitrile–zinc chloride or methacrylonitrile–stannic chloride complexes

The effect of complex formation on stereoregulation in free-radical polymerization was studied. Complexes of methacrylonitrile with ZnCl₂ and SnCl₄ were prepared and their properties and structures examined. The complexes were polymerized by initiation of α,α′-azobisisobutyronitrile or by irradiation with γ-rays from a⁶⁰Co source or ultraviolet rays either in solution or in bulk at various temperatures ranging from ?78 to 100°C. The triad tacticities of the resulting polymethacrylonitrile were determined by converting it to poly(methyl methacrylate) for NMR spectroscopy. The radicals in complexed forms were studied by ESR spectroscopy with the polymerization system in toluene irradiated with ultraviolet rays at ?120°C. The tacticities of the resulting polymers and their dependencies on the polymerization temperature were found to be characteristic of the complex species, i.e., the kind of metal chloride and the stoichiometry, being different from the tacticities and the dependencies, respectively, of the polymer obtained with pure methacrylonitrile. The 2:1 and the 1:1 complexes with SnCl₄ were found to give an eleven-line and a nine-line spectrum, respectively. On the basis of the results of both the tacticities and the ESR spectra, it was estimated that the proportion of the intracomplex reaction was 40%, and that the probabilities of isotactic diad addition of intra- and intercomplex reaction were 0.70 and 0.48, respectively.     

Polymerization of vinyl monomers by diphenylsulfone–potassium complexes

Diphenylsulfone (DPSO₂) was found to react with an equimolar amount of potassium in tetrahydrofuran (THF), dimethoxyethane (DME), or diglyme (DG) at reflux or an elevated temperature to yield a reddish-black solution, giving an electron spin resonance (ESR) signal. The signal was attributed to the formation of relatively labile DPSO₂ anion radical. The apparent effects of solvents on the reactivity of DPSO₂ with potassium depended on the polarities and the solvation powers: benzene ? toluene ? dioxane ? tetrahydrofuran < monoglyme < diglyme. The monopotassium complex was found to react further with another molecular amount of the metal to yield a dark blue solution giving no ESR signal. The monopotassium complex initiated the polymerization of acrylonitrile (AN). It did not, however, initiate the polymerization of methyl methacrylate (MMA), styrene (St), or isoprene (IP). The active species of the monopotassium complex that initiated the polymerization of AN was found from analyses of the reaction products and the infrared spectrum of oily oligomer of AN obtained by the complex to be potassium benzenesulfinate. The dipotassium complex was found to initiate the polymerization of MMA, St, IP and AN. The active species of the dipotassium complex that initiated the polymerization of MMA, St, or IP was found from analyses of the reaction products and the infrared spectrum of the oily oligomer of MMA obtained by the complex to be phenyl potassium.     

Polymerization of coordinated monomers. XVIII. Sequence distribution in methyl acrylate–styrene copolymers prepared in the presence of zinc chloride

Methyl acrylate and styrene have been copolymerized in the presence of zinc chloride either by photoinitiation or spontaneously. The copolymerization mechanism is investigated by analyses of copolymers composition and monomer sequence distribution. The resulting copolymers are not always alternating, their composition being dependent especially on the monomer feed ratio. Appreciable deviation to higher methyl acrylate unit content from an equimolar composition occurs at monomer feed fractions of methyl acrylate over 0.7. The larger deviation is induced by higher temperature, by photoirradiation, and by greater dilution of the reaction mixture with toluene. The ¹³C-NMR spectrum of the alternating copolymer shows a sharp singlet at the carbonyl region, whereas the spectra of random copolymers prepared by benzoyl peroxide initiation at 60°C show a triplet splitting at the carbonyl carbon region, irrespective of copolymer composition. The relative intensities of the triplet peaks for the random copolymers are in good correspondence to the contents of triad sequences calculated by means of conventional radical copolymerization theory. These results clearly indicate that the carbonyl splitting is caused predominantly by variation of the monomer sequence and not by variation of the stereosequence. The monomer sequence distribution in the copolymers is thus directly and quantitatively measured from the split carbonyl resonance. Although the same triplet splitting appears in the spectra of methyl acrylate–rich copolymers prepared in the presence of zinc chloride at high feed ratios (>0.7) of methyl acrylate, the relative intensities of the split peaks do not fit the sequence distributions of random copolymers calculated by means of the Lewis–Mayo equation. The copolymerization yielding these peculiar sequences and the alternating sequence in the presence of zinc chloride is fully comprehended by a copolymerization mechanism proceeding between two active coordinated monomers, i.e., the ternary molecular complex composed of zinc chloride, methyl methacrylate, and styrene, and the binary molecular complex composed of zinc chloride and methyl methacrylate.     

Polymerization of vinyl monomers by alkali metal–thiobenzophenone complexes

The polymerization of vinyl monomers by use of alkali metal (Li, Na, K)–thiobenzophenone complexes was studied. Monoalkali metal complexes of thiobenzophenone (thioketyls) induced the polymerization of vinyl monomers such as acrylonitrile (AN) and methyl methacrylate (MMA), and dialkali metal complexes of thiobenzophenone (dianion) induced the polymerization of styrene (St), butadiene (Bd), and isoprene (Ip) as well as AN and MMA. The polymerization of MMA with the dianion was initiated by both the mercaptide and the carbanion of the dianion, but that of styrene was initiated by the carbanion alone. In the case of polymerization of MMA by the thioketyl, the initial rate of polymerization depended on the catalyst concentration and the square of the monomer concentration. Similar results were obtained in the case of the dianion. The polymer yield increased with increasng polarity of sovents. In the copolymerization of AN with MMA, the copolymer obtained consisted almost of AN units. From these results, it was concluded that the polymerization proceeded by anionic mechanisms.     

Polymerization of coordinated monomers. VI. Molecular complex formation of methyl methacrylate coordinated to stannic chloride with styrene or toluene

The equilibrium constants for the complex formation between stannic chloride and methyl methacrylate were determined in n-hexane–toluene solution at 0, ?20, and ?30°C by using the absorption band at 350 nm. Continuous variation plots at ?20°C in n-hexane based on the ¹H-chemical shifts definitely show a 1:1 interaction between the coordinated methyl methacrylate and styrene or toluene. The magnitudes of the shifts for the four groups of protons in methyl methacrylate are found to be in a specific ratio in common with the 1:2 complex–styrene or -toluene system. The equilibrium constants for the ternary molecular complex formation between the 1:2 complex and styrene or toluene were determined in n-hexane in the temperature range ?50 to +20°C by use of the chemical shifts. The concentrations of the complex species in the alternating copolymerization solutions were estimated by use of the equilibrium constants. There is a linear relationship between the enthalpy and the entropy changes for the ternary molecular complex formation, which is governed by the enthalpy factor. The specificity of the interactions indicates a specific time-averaged orientation of benzene ring to the coordinated methyl methacrylate. The effects of the coordination of methyl methacrylate to stannic chloride were discussed on the basis of results of ¹³C-NMR spectroscopy.     

Polymerization of coordinated monomers. XVII. Alternating copolymerization of methyl methacrylate with styrene by boron compounds

By the use of various boron compounds methyl methacrylate and styrene were copolymerized under photoirradiations at ?20°C. The alternately regulating activities of the boron compounds in the copolymerizations were in the following order: boron trichloride > ethylboron dichloride > boron trifluoride > diethylboron chloride ? triethylboron (?0). Boron trichloride and ethylboron dichloride exhibited such high regulating activities that their presence in 1 mol% in the charged methyl methacrylate was sufficient to complete equimolar alternating copolymerization. The alternating copolymerization proceeded in the steady state. The copolymerization rates decreased in the following order: boron trichloride ? ethylboron dichloride > diethylboron chloride ? triethylboron (?0). The cotacticities of methyl methacrylate-centered triads in the resulting copolymers were identical to those prepared with boron trichloride, ethylboron dichloride, and diethylboron chloride. The mechanism of the alternating copolymerization is discussed.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. V. Effects of p-benzoquinone and dose rate on methyl methacrylate–silica gel system

In order to elucidate the mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the effects of p-benzoquinone addition and dose rate were studied in detail. Most of the polymerization is inhibited by p-benzoquinone at levels above 10^-2 mole/l. The GPC spectra of both graft polymers and homopolymers show two peaks. The high molecular weight material appears to have been formed by polymerization by a radical mechanism, because these peaks decrease as p-benzoquinone concentration increases; on the other hand, their low molecular weight polymers seem to be products of an ionic polymerization mechanism because those peaks are almost not affected by p-benzoquinone. The four GPC peaks differ in dose rate dependences of their polymerization rate. The dose-rate exponents of polymerization rate were obtained for the four GPC peaks. The behavior of the low molecular weight peaks of graft polymers and homopolymers were quite different, suggesting that the polymers differ considerably in formation mechanism.     

Dielectric study on copolymers in dilute solution. Relaxation behavior of methyl methacrylate–styrene and methyl methacrylate–α-methylstyrene copolymers

Dielectric measurements were made on some methyl methacrylate (MMA)-related polymers in dilute solution, in the frequency range of 1–150 MHz. Effects of the solvent viscosity upon the relaxation behavior were carefully examined. The dielectric relaxation of MMA–styrene copolymers with a high content of MMA units as well as that of the MMA–α-methylstyrene copolymer was little affected by the solvent viscosity. With the aid of Kramers'rate constant for small friction, it was found that their dipolar relaxation is very similar to that caused by the internal rotation of a flexible side-chain. On the other hand, MMA–styrene copolymer with a low content of MMA units showed a diffusion-controlled relaxation process, which can be interpreted in terms of Kramers' theory for large friction. In the latter case, the dipolar relaxation appears to reflect a molecular motion such as sweeping out solvent molecules. These results indicate that it is not the dipole itself but its environment, or rather the local molecular structure containing dipoles, that principally controls the relaxation process. On this basis, we propose a criterion, for quantitatively distinguishing the two relaxation mechanisms from each other.     

Polymerization of coordinated monomers. XV. 13C-NMR study on the alternating copolymers of methyl methacrylate with styrene

By the use of various metal halides methyl methacrylate and styrene were copolymerized to produce equimolar alternating sequences and different cotacticities. The ¹³C-NMR spectra of these copolymers were simple in comparison to those of random copolymers because of the fixed monomer sequence which yielded sharply split triplets for carbonyl, methoxy, and quaternary carbons. The relative intensities in these split peaks varied according to the metal halide used. A comparison of the intensities made it possible to obtain clear-cut and quantitative information on the methyl methacrylate-centered triad cotacticity of the copolymers. The spectral assignment with respect to the methoxy carbon was definitely justified by the combined use of partly relaxed Fourier transform and selective decoupling techniques. The spectrum of aromatic C₁ carbon in styrene units also split into three main peaks. From their relative intensities the splitting was attributed to styrene-centered triad cotacticity. The assignment of this carbon was compared with two other assignments made for random copolymers of methyl methacrylate with styrene; they were contradictory, however. Furthermore, an apparent discrepancy was observed between methyl methacrylate-and styrene-centered tactic triads of these alternating copolymers. The origin of this discrepancy suggests a close relationship with the copolymerization mechanism.     

Alternating copolymerization of polar vinyl monomers in the presence of zinc chloride. III. NMR study of methyl methacrylate–styrene copolymer

The copolymer composition curve of the methyl methacrylate–styrene copolymer obtained by the copolymerization in the presence of ZnCl₂ has more alternating tendency than that of ordinary methyl methacrylate–styrene copolymer obtained by radical copolymerization. The fine structure of the copolymer was examined by NMR, and the mechanism of the propagation step of the copolymerization in the presence of ZnCl₂, which was proposed in the first report of this series, was verified.     

Polymerization of coordinated monomers. XIX. Kinetic study of the alternating copolymerization of methyl methacrylate with styrene by boron trichloride

Alternating copolymerizations of methyl methacrylate with styrene in the presence of boron trichloride at 0°C in 1,2-dichloroethane were carried out by using benzoyl peroxide as an initiator. Conversion increased proportionally with polymerization time, whereas the degree of polymerization was constant irrespective of time. The rate depended linearly on the square root of the concentration of benzoyl peroxide. The equilibrium constants for the formation of the ternary molecular complex composed of methyl methacrylate, styrene, and boron trichloride in 1,2-dichloroethane at ?20, ?10, and +4°C were determined by ¹H-NMR spectroscopy. The concentrations of the ternary molecular complex in the polymerization mixtures were evaluated from the equilibrium constant of the formation. The rate of the alternating copolymerization was proportional to the first order of the concentration of the ternary molecular complex. The distribution of methyl methacrylate-centered triads in the alternating copolymer was different from that of styrene-centered triads. These results can be explained by a mechanism involving the homopolymerization of a ternary molecular complex.     

Polymerization of complex systems. A study of the system methyl methacrylate–vinyl isobutyl ether–maleic anhydride by means of an NMR technique

It has been shown that the rates of polymerization of individual monomers in a mixture of monomers can be followed by means of an NMR technique. The technique is rapid and simple and requires very little sample. The system MMA–MA–VIBE was investigated by the technique. From the data obtained it was concluded that the polymer formed in a mixture of the three monomers is a block copolymer made up of (MMA)_m and (MA–VIBE)_n units, the lengths of which depend on the monomer concentrations.     

Polymerization of coordinated monomers. X. Kinetic study of alternating copolymerization of methyl methacrylate and styrene with stannic chloride in dichloroethane

The alternating copolymerization of methyl methacrylate with styrene with the use of stannic chloride was kinetically examined at ?20°C in 1,2-dichloroethane both under photoirradiation and with radical initiator (2:1 tri-n-butylboron-benzoyl peroxide system). At conversions lower than 7%, the conversion increases linearly to the polymerization time, whereas the degree of polymerization is constant irrespective of the polymerization time. The alternating copolymerizations are 1.5 order and the 1.0 order reactions with respect to the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The linear dependences of the rates upon the 0.5 order of the intensity of the incident light and upon the 1.0 order of the concentration of tri-n-butylboron indicate a bimolecular termination. The rate normalized by the 1.5 order of the concentration of the coordinated methyl methacrylate and the rate normalized by the concentration of the coordinated methyl methacrylate are proportional to the 1.5 and 1.0 orders of the charged concentration of styrene, for the copolymerizations under photoirradiation and with initiator, respectively. The kinetic results in the 1,2-dichloroethane solution are quite consistent with those in the toluene solution. The alternating copolymerization mechanism, in which the ternary molecular complex predominantly homopolymerizes as a monomer unit, is confirmed.     

Polymerization of coordinated monomers VII. A kinetic study on the alternating copolymerization of methyl methacrylate with styrene using stannic chloride

The alternating copolymerization of methyl methacrylate with styrene in the presence of stannic chloride at ?50°C in toluene was kinetically investigated both under photoirradiation and with the tri-n-butylboron-benzoyl peroxide initiator. The concentrations of the binary and ternary molecular complexes in the copolymerization solution were estimated by use of the equilibrium constants. The rates are found to be proportional to the 1.5th and 1.0th orders of the concentration of the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The conversion increases proportionally with the polymerization time, while the degree of polymerization is constant irrespective of the time. The rates depend linearly upon the square root of the intensity of the incident light and upon the concentration of tri-n-butylboron, respectively. The alternating copolymerization is confirmed experimentally to precede the homopolymerization of the monomer charged in large excess both under photoirradiation and with initiator. The kinetic results indicate consistently that the alternating copolymerization proceeds through the homopolymerization of the ternary molecular complex in the steady state with a bimolecular termination. Both the conventional radical mechanism and the double complex mechanism are unsuitable for the present alternating copolymerization.     

Radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VI. Temperature dependence and effects of additives on methyl methacrylate–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the temperature dependence and effects of acetone and pyridine were investigated. It was found that even at ?78°C the polymerization rate was quite fast. The amounts of high molecular weight GPC peaks of both graft polymers and homopolymers increased with increasing irradiation temperature. The activation energy of the adsorbed state polymerization was low compared with that of bulk polymerization. The low molecular weight peaks of homopolymers decreased with acetone addition but were almost unaffected by pyridine. The low molecular weight peaks of homopolymers were thus polymerized by an anionic mechanism. In the methyl methacrylate–silica gel system both radical and anionic polymerization take place at the same time in formation of graft polymers and homopolymers. A reaction mechanism for the methyl methacrylate–silica gel system was proposed based on the results obtained to date.