Copolymerization of new pyrazolone-containing monomers with certain vinyl comonomers

The polymerization ability of two new pyrazolone-containing monomers—3-methyl-1-phenyl-4-crotonoyl-pyrazolone-5 ( Cr ) and 3-methyl-1-phenyl-4-(3′-phenyl-acryloyl) pyrazolone-5 ( Cy )—was investigated. The monomers were obtained by acylation of 3-methyl-1-phenyl-pyrazolone-5 with crotonyl chloride or cinnamoyl chloride, respectively. It was established that the two monomers do not homopolymerize either under the action of ionic and radical initiators nor with γ-rays (doses between 2 and 10 MRad). In contrast to this, the two monomers copolymerize with other vinyl comonomers. Copolymers of Cr and Cy with methacrylic acid (MAA), methyl methacrylate (MMA), and Styrene (St) were synthesized by radical copolymerization. The molecular weights of the polymer products obtained were in the 10,000–65,000 range. It was established that the molecular weight characteristics of the copolymers were affected by the concentration of the pyrazolone-containing monomer and by the chemical nature of the solvent used. The copolymerization of Cr and Cy with MAA was investigated in detail in order to evaluate the relative activity of the new monomers during copolymerization. The reactivity ratios (r) were calculated by three different methods with good agreement. The values obtained for the monomer pairs are: r_MAA = 0.61 ± 0.01, r_Cr = 0.04 ± 0.01; r_MAA = 0.64 ± 0.05, r_Cy = 0.02 ± 0.02. The Q/e values for Cr and Cy were determined using the reactivity ratios of both monomers.     

Determination of the reactivity ratios of methyl acrylate with the vinyl acetate,vinyl 2,2-dimethyl-propanoate,and vinyl 2-ethylhexanoate

The course of composition drift in copolymerization reactions is determined by reactivity ratios of the contributing monomers. Since polymer properties are directly correlated with the resulting chemical composition distribution, reactivity ratios are of paramount importance. Furthermore, obtaining correct reactivity ratios is a prerequisite for good model predictions. For vinyl acetate (VAc), vinyl 2,2-dimethyl-propanoate also known as vinyl pivalate (VPV), and vinyl 2-ethylhexanoate (V2EH), the reactivity ratios with methyl acrylate (MA) have been determined by means of low conversion bulk polymerization. The mol fraction of MA in the resulting copolymer was determined by ¹H-NMR. Nonlinear optimization on the thus-obtained monomer feed–copolymer composition data resulted in the following sets of reactivity ratios: r_MA = 6.9 ± 1.4 and r_VAc = 0.013 ± 0.02; r_MA = 5.5 ± 1.2 and r_VPV = 0.017 ± 0.035; r_MA = 6.9 ± 2.7 and r_V2EH = 0.093 ± 0.23. As a result of the similar and overlapping reactivity data of the three methyl acrylate–vinyl ester monomer systems, for practical puposes these data can be described with one set of reactivity data. Nonlinear optimization of all monomer feed–copolymer composition data together resulted in r_MA = 6.1 ± 0.6 and r_VEst = 0.0087 ± 0.023. © 1994 John Wiley & Sons, Inc.     

Emulsion copolymerization of styrene and methyl methacrylate

Chain transfer constants to monomer have been measured by an emulsion copolymerization technique at 44°C. The monomer transfer constant (ratio of transfer to propagation rate constants) is 1.9 × 10^?5 for styrene polymerization and 0.4 × 10^?5 for the methyl methacrylate reaction. Cross-transfer reactions are important in this system; the sum of the cross-transfer constants is 5.8 × 10^?5. Reactivity ratios measured in emulsion were r₁ (styrene) = 0.44, r₂ = 0.46. Those in bulk polymerizations were r₁ = 0.45, r₂ = 0.48. These sets of values are not significantly different. Monomer feed compcsition in the polymerizing particles is the same as in the monomer droplets in emulsion copolymerization, despite the higher water solubility of methyl methacrylate. The equilibrium monomer concentration in the particles in interval-2 emulsion polymerization was constant and independent of monomer feed composition for feeds containing 0.25–1.0 mole fraction styrene. Radical concentration is estimated to go through a minimum with increasing methyl methacrylate content in the feed. Rates of copolymerization can be calculated a priori when the concentrations of monomers in the polymer particles are known.     

Synthesis and polymerization of heteroaromatic vinyl monomers

Methods of preparing new monomers, 2-vinyl and 2-isopropenyloxazoles and 2-isopropenyl-1,3,4-oxadiazoles are described. New methods were developed to synthesize monomers containing an isoxazole or a thiazole ring. Radical homopolymerization and copolymerization with styrene of these monomers were carried out by using AIBN as an initiator. Monomer reactivity ratios r₁, r₂ and Alfrey-Price Q–e values were determined by the Fineman-Ross and the Mayo-Lewis methods. The localization energy of the β-carbon was calculated by a HITAC-5020 computer, and the monomer reactivity is discussed in terms of L_β.     

Reactivity ratios for copolymerization of vinyl chloride with 2-methylpentyl vinyl brassylate by computerized linearization

A computerized version of the Fineman-Ross linearization procedure was used to determine reactivity ratios for copolymerization of vinyl chloride (monomer 1) and 2-methylpentyl vinyl brassylate (monomer 2). From differential refractometry data for the products of low-conversion copolymerization, the procedure gave r₁ = 1.06 and r₂ = 0.234. The ratios computed from chlorine contents of the same products were r₁ = 1.10 and r₂ = 0.239. The polarity factor (e₂) and general monomer reactivity (Q₂) calculated for monomer 2 from these ratios were, respectively, ?0.95 to ?0.98 and 0.032–0.033. The interquartile range for the copolymerization of a mixture of 60% monomer 1 and 40% monomer 2 was 1.4%. These values suggest that from suitable proportions of reactants, sufficiently homogeneous distribution of monomers can be achieved in copolymers of vinyl chloride and 2-methylpentyl vinyl brassylate to offer the possibility of effective internal plasticization.     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Estimation of Reactivity Ratios in the Copolymerization of Styrene and VeoVa‐10

The styrene and vinyl neodecanoate copolymerization system shows a strong tendency to form two separate homopolymers. In order to improve the feeding strategies and hence the copolymer uniformity, it is necessary to know the reactivity ratios between these monomers. The error‐in‐variables‐method (EVM) is the most recommended mathematical procedure for estimating these parameters. Experiments on free‐radical copolymerization in solution in sealed ampoules are carried out to provide data for the conversion (via gravimetry) and fractional monomer compositions (via Fourier transform mid‐infrared (mid‐FT‐IR) spectroscopy). These data allow estimation of the reactivity ratios. EVM appropriately takes into account the experimental errors in the data and allows determination of the reactivity ratio values by the Mayo–Lewis model (r₁ = 28.60 and r₂ = 1.23). The convergence and robustness of the method decrease considerably with a larger discrepancy between the reactivity values.     

Ferrocene-containing polymers. II. Radiation-induced copolymerizations of ferrocenylmethyl methacrylate with styrene,methyl methacrylate,and ethyl acrylate

Ferrocenylmethyl methacrylate (FMMA) was copolymerized with styrene (St), methyl methacrylate (MMA), and ethyl acrylate (EA) in benzene solution at 25°C by γ radiation. The reactions proceeded by a free radical mechanism, and monomer reactivity ratios were derived by the Tidwell–Mortimer method for St(M₁)–FMMA(M₂), r₁ = 0.35 and r₂ = 0.46; for MMA(M₁–FMMA)(M₂), r₁ = 0.85 and r₂ = 1.36; for EA(M₁)–FMMA(M₂), r₁ = 0.36 and r₂ = 3.03. The Q and e values of FMMA determined from copolymerization with St were 0.97 and 0.55, respectively. Terpolymerization of a MMA–FMMA–EA system based on the Alfrey–Goldfinger equations was studied. This is a typical terpolymerization system in which reactivities of the monomers obey the Q–e scheme. Comparing the results obtained here with those previously reported for other monomers, we concluded that FMMA is one of the most highly reactive monomers among alkyl methacrylates.     

From fatty acid and lactone biobased monomers toward fully renewable polymer latexes

Novel waterborne polymeric materials based on renewable resource monomers have been prepared by the environmentally friendly miniemulsion polymerization of an oleic acid‐derivative monomer (MOA) and the α‐methylene‐γ‐butyrolactone (α‐MBL). The effect of the incorporation of different amounts of α‐MBL on kinetics and polymer microstructure is investigated. The estimation of the monomer reactivity ratios (r_α‐MBL = 0.49 and r_MOA = 1.26) shows the slight lower reactivity of the α‐MBL, resulting in a random copolymer moderately enriched with MOA at the beginning of the reaction. The thermal and mechanical properties of the polymers demonstrate that by incorporating the lactone it is possible to produce copolymers in a broad range of glass transition temperatures, with high thermal stability and improved mechanical properties. This study provides a new green route toward the bio‐sourced preparation of polymer latexes with tuneable properties, which can range from coatings to adhesives. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3543–3549     

Synthesis of polymers having photocrosslinkable moieties for second-order nonlinear optics

Second-order non-linear optical polymers having photocrosslinkable moieties were synthesized by cationic polymerization of monomer (I) and monomer (II). The polymerization proceeded rapidly to give linear polymers in high yields. Monomer reactivity ratios were calculated to be r₁ = 0.90 and r₂ = 0.96 (r₁r₂ = 0.86), indicating that these monomers copolymerized through the almost ideal copolymerization mechanism. The photocrosslinking reaction of an equimolar copolymer film underwent the conversion of up to ca. 70% upon irradiation with a 500 W high-presure mercury lamp for 5 min. The electric field induced polar orientation of the chromophores (pendant 4-nitrophenyloxy groups) in a photocrosslinked polymer was stable for more than 10 days. This polymer exhibits a nonlinear coefficient d₃₃ of 5.6 × 10^-10 esu measured at a pumping wavelength of 1064 nm.     

Effect of the substituents on radical copolymerization of dialkyl fumarates with some vinyl monomers

Radical copolymerization of dialkyl fumarates (DRF) with various vinyl monomers was carried out in benzene at 60°C. The monomer reactivity ratios, r₁ and r₂, were determined from the comonomer-copolymer composition curves. The relative reactivity of DRFs with various ester substituents toward a polystyryl radical was revealed to depend on both steric and polar effects of the ester groups. It has also been clarified that α-substituents of the polymer radical have a significant role in addition of DRF, from the comparison of the monomer reactivity ratios determined in copolymerizations with monosubstituted and 1,1-disubstituted ethylenes. The absolute cross-propagation rate constants were also evaluated and discussed. © 1992 John Wiley & Sons, Inc.     

Effects of temperature on styrene–methacrylonitrile copolymerization

The free-radical copolymerization of styrene and methacrylonitrile was studied in toluene solution at 60, 90, and 120°C. Copolymer composition was estimated from gas-chromatographic measurement of unreacted monomer concentrations. Reactions were carried to about 20% conversion to minimize analytical errors. Reactivity ratios were calculated by using an integrated form of the Mayo-Lewis simple copolymerization equation. Reactivity ratios were not sensitive to reaction temperature. The values at 90°C are r₁ = 0.41 (methacrylonitrile) and r₂ = 0.37 (styrene). The r₁ values are higher than those reported by other workers, presumably because of advantages in the present analytical technique and calculation method. The negligible temperature dependence of reactivity ratios is in accord with theory. If monomer pairs exhibit pronounced dependence of reactivity ratios on polymerization temperature, this may indicate a change in mode of placement of units in the polymer chain.     

Polymerization of complex systems. A study of the system methyl methacrylate–vinyl isobutyl ether–maleic anhydride by means of an NMR technique

It has been shown that the rates of polymerization of individual monomers in a mixture of monomers can be followed by means of an NMR technique. The technique is rapid and simple and requires very little sample. The system MMA–MA–VIBE was investigated by the technique. From the data obtained it was concluded that the polymer formed in a mixture of the three monomers is a block copolymer made up of (MMA)_m and (MA–VIBE)_n units, the lengths of which depend on the monomer concentrations.     

Synthesis and characterization of original functional polymers of tetrafluoroethylene and 4,5,5‐trifluoro‐4‐ene pentyl acetate

The bulk radical copolymerization of tetrafluoroethylene (TFE) with 4,5,5‐trifluoro‐4‐ene pentyl acetate (FAc), initiated by tert‐butyl peroxypivalate to synthesize original, functionalized fluorinated poly(TFE‐co‐FAc), was investigated. FAc monomer was prepared from a five‐step process. The copolymerization was carried out in batch at different initial monomer molar ratios ([TFE]_o/[FAc]_o ranging from 95/5 to 10/90 mol %) and at different initiator concentrations (ranging between 0.075 and 1.100 mol % about the monomers) at 70 °C. All the experiments revealed the production of fluorooligomers as evidenced by an allylic‐transfer reaction from FAc. The microstructure of these copolymers (i.e., the molar percentage of both monomers in the copolymers) was assessed by ¹⁹F NMR spectroscopy. From the kinetics of copolymerization, two key characteristics were determined. First, the reaction order to the initiator (being 1.07) and that of FAc monomer (0.85) showed a heterogeneous character of the copolymerization and monomolecular chain‐transfer reaction to FAc. Second, from the Tidwell and Mortimer method, the reactivity ratios of both comonomers were determined, showing a tendency to alternance in a wide range of initial monomeric ratios (30/70–70/30): r_FAc = 0.20 ± 0.26 and r_TFE = 0.18 ± 0.15. Alfrey and Price's Q and e values of FAc were calculated by Greenley's technique [Q_FAc = 0.098 (from Q_TFE = 0.032) and e_FAc = 1.23 (vs e_TFE = 1.63)], indicating that FAc is a strong electron‐withdrawing monomer as TFE. The normalized monomer‐diad and triad fractions as a function of the polymer composition were obtained from the comonomer sequence‐distribution procedure. The average molecular weights and molecular weight distributions as well as the thermal properties (glass‐transition temperature and decomposition temperature) of the fluorocopolymers were assessed and are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1693–1706, 2004     

Water-soluble copolymers. XII. Copolymers of acrylamide with sodium-3-acrylamido-3-methylbutanoate: Synthesis and characterization

The copolymerization of acrylamide (AM) with sodium-3-acrylamido-3-methylbutanoate (NaAMB) has been studied. The value of r₁r₂ has been determined to be 0.56 for the AM–NaAMB pair. The molecular weights of the copolymers were relatively unaffected by monomer feed ratios. The copolymer microstructures, including run numbers and sequence distributions, were calculated from the reactivity ratios. The solution properties of the AM–NaAMB copolymers, as well as the NaAMB homopolymer, will be reported in a subsequent paper.     

Anionic copolymerization of optically active α-methylbenzyl methacrylate and trityl methacrylate. I. Reactivity of monomers

The monomer reactivity ratios were determined in the anionic copolymerization of (S)- or (RS)-α-methylbenzyl methacrylate (MBMA) and trityl methacrylate (TrMA) with butyllithium at ?78°C, and the stereoregularity of the yielded copolymer was investigated. In the copolymerization of (S)-MBMA (M₁) and TrMA (M₂) in toluene the monomer reactivity ratios were r₁ = 8.55 and r₂ = 0.005. On the other hand, those in the copolymerization of (RS)-MBMA with TrMA were r₁ = 4.30 and r₂ = 0.03. The copolymer of (S)-MBMA and TrMA prepared in toluene was a mixture of two types of copolymer: one consisted mainly of the (S)-MBMA unit and was highly isotactic and the other contained both monomers copiously. The same monomer reactivity ratios, r₁ = 0.39 and r₂ = 0.33, were obtained in the copolymerizations of the (S)-MBMA–TrMA and (RS)-MBMA–TrMA systems in tetrahydrofuran (THF). The microstructures of poly[(S)-MBMA-co-TrMA] and poly-[(RS)-MBMA-co-TrMA] produced in THF were similar where the isotacticity increased with an increase in the content of the TrMA unit.     

Quantifying and Controlling the Composition and ‘Randomness’ Distributions of Random Copolymers

The effect of disparity in the reactivity ratios of monomer pairs on the composition distribution and microstructure of the resultant copolymer formed through free‐radical polymerization is quantified computationally. This correlation has been determined for the monomer pairs of styrene/methyl methacrylate and styrene/2‐vinyl pyridine for a variety of monomer feed ratios. These monomer pairs were chosen as they represent systems that have been utilized to experimentally examine the importance of copolymer architecture on its ability to compatibilize an immiscible polymer blend. Moreover, their respective random copolymers show conflicting results for this examination. The results of this work show that the difference in the reactivity ratios of styrene and 2‐vinyl pyridine copolymer (r₁ = 0.5, r₂ = 1.3) significantly broadens the composition and randomness distribution of the resultant copolymer. This breadth is not easily avoided as it evolves even in the early stages of the copolymerization. Conversely, for the styrene/methyl methacrylate pair, the reactivity ratios are similar (r₁ = 0.46, r₂ = 0.52) and this results in a copolymer with a narrow composition distribution and sequence distribution dispersion. Stopping the polymerization at early conversion further narrows both distributions. The presented results, therefore, provide fundamental information that must be considered when planning an experimental procedure to evaluate the relative importance of sequence distribution and composition distribution of a random on its application.     

Synthesis and characterization of cationic copolymers of butylacrylate and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride

Cationic copolymers of butylacrylate (BA) and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride (MAPTAC) were synthesized by free‐radical‐solution polymerization in methanol and ethanol. An FT‐Raman Spectrometer and NMR were used to monitor the polymerization process. The copolymers were characterized by light scattering, NMR, DSC, and thermogravimetric analysis. It was found that random copolymers could be prepared, and the molar fractions of BA and cationic monomers in the copolymers were close to the feed ratios. The copolymer prepared in methanol had a higher molecular weight than that prepared in ethanol. As the cationic monomer content increased, the glass‐transition temperature (T_g) of the copolymer also increased, whereas the thermal stability decreased. The reactivity ratios for the monomers were evaluated. The copolymerization of BA (M₁) with MAPTAC (M₂) gave reactivity ratios such as r₁ = 0.92 and r₂ = 2.61 in ethanol as well as r₁ = 0.79 and r₂ = 0.90 in methanol. This study indicated that a random copolymer containing a hydrophobic monomer (BA) and a cationic hydrophilic monomer (MAPTAC) could be prepared in a proper polar solvent such as methanol or ethanol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1031–1039, 2001     

Graft polymers with macromonomers. II. Copolymerization kinetics of methacrylate-terminated polystyrene and predicted graft copolymer structures

Copolymerization studies of methacrylate-terminated polystyrene macromonomers (M₁) with several comonomers (M₂) verified the modified kinetic scheme and permitted prediction of graft polymer compositions and structures. Instantaneous and cumulative copolymer compositions, average graft distributions, and grafts per molecule are predicted from FORTRAN IV or BASIC programs. The r₂ relative reactivity ratios determined from styrene copolymerization (0.61) or from low conversion acrylic monomer in aqueous suspension (～0.4) had good agreement with literature values (about 0.6 and 0.4, respectively). Decreased macromonomer reactivity determined at high acrylic monomer conversions was attributed to phase separation phenomena. The Macromers also exhibited lower reactivity than predicted when copolymerized with acrylic monomers in DMSO/benzene solutions (r₂ ～ 0.8).     

Copolymerization of ethylene with a homologous series of vinyl esters

The effect of the alkyl group on the relative reactivity of a homologous series of vinyl esters (2) has been studied with ethylene (1) as reference monomer, tert-butyl alcohol as solvent, at 62°C and 35 kg/cm². The experimental method was based on frequent measurement of the monomer feed composition throughout the copolymerization reaction by means of quantitative gas-chromatographic analysis. Highly accurate monomer reactivity ratios were estimated in a statistically justified manner by a nonlinear least-squares method applied to the integrated copolymer equation. The reactivity of the vinyl ester monomers towards an ethylene radical increased with decreasing electron-with-drawing ability of the ester group. All vinyl ester radicals considered turned out to have the same preference for their own monomer over ethylene (constant r₂ = 1.50). Reactivity ratios are discussed in terms of the Q–e scheme and the Taft relation. It appeared that chiefly polar factors contribute to the observed relative reactivity, while probably resonance stabilization only plays a minor part. Steric hindrance seems to impair monomer reactivity, only from vinyl pivalate on. Relative reactivities of the vinyl esters are compared with literature values, where other reference monomers have been used.