In situ observation of gamma-Fe2O3 nanoparticle adsorption under different monolayers at the air/water interface

We studied the adsorption of gamma-Fe 2O 3 nanoparticles from an aqueous solution under different charged Langmuir monolayers (stearic acid, stearyl alcohol, and stearyl amine). The aqueous subphase was composed of a colloidal suspension of gamma-Fe 2O 3 nanoparticles. The average hydrodynamic diameter of the nanoparticles measured by dynamic light scattering measurements was 16 nm. The observed zeta potential of +40 mV (at pH 4) results in a long-term stability of the colloidal dispersion. The behavior of the different monolayer/nanoparticle composites were studied with surface pressure/area (pi/ A) isotherms. The adsorption of the nanoparticles under the different monolayers induced an expansion of the monolayers. These phenomena depended on the charge of the monolayers. After the Langmuir/Blodgett transfer on glass substrates, the nanoparticle/monolayer composite films were studied by means of UV-vis spectroscopy. The spectra pointed to increasing adsorption of the nanoparticles with increasing electronegativity of the monolayers. On the basis of these results, we studied the in situ adsorption of nanoparticles under the different monolayers by X-ray reflectivity measurements. Electron density profiles of the liquid/gas interfaces were obtained from the X-ray reflectivity data. The results gave clear evidence for the presence of electrostatic interaction between the differently charged monolayers and the positively charged nanoparticles. While the adsorption process was favored by the negatively charged stearic acid monolayer, the positively charged layer of stearyl amine prevented the formation of ultrathin nanoparticle layers.     

Langmuir monolayers of Co nanoparticles and their patterning by microcontact printing

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.     

Gold nanoparticle self-assembly in two-component lipid Langmuir monolayers

Self-assembly processes are considered to be fundamental factors in supramolecular chemistry. Langmuir monolayers of surfactants or lipids have been shown to constitute effective 2D "templates" for self-assembled nanoparticles and colloids. Here we show that alkyl-coated gold nanoparticles (Au NPs) adopt distinct configurations when incorporated within Langmuir monolayers comprising two lipid components at different mole ratios. Thermodynamic and microscopy analyses reveal that the organization of the Au NP aggregates is governed by both lipid components. In particular, we show that the configurations of the NP assemblies were significantly affected by the extent of molecular interactions between the two lipid components within the monolayer and the monolayer phases formed by each individual lipid. This study demonstrates that multicomponent Langmuir monolayers significantly modulate the self-assembly properties of embedded Au NPs and that parameters such as the monolayer composition, surface pressure, and temperature significantly affect the 2D nanoparticle organization.     

Optical method for predicting the composition of self-assembled monolayers of mixed thiols on surfaces coated with silver nanoparticles

With a simple optical method, based on UV-vis absorption spectra on glass slides, it is possible to predict the composition of self-assembled monolayers of mixed thiols, grafted on monolayers of silver nanoparticles. Glass slides are modified with the layer-by-layer technique, first forming a monolayer of mercaptopropyltrimethoxysilane, then grafting a monolayer of silver nanoparticles on it. These surfaces are further coated by single or mixed thiol monolayers, by dipping the slides in toluene solutions of the chosen thiols. Exchange constants are calculated for the competitive deposition between the colorless 1-dodecanethiol or PEG5000 thiol and BDP-SH, with the latter being a thiol-bearing molecule containing the strongly absorbing BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) moiety, synthesized on purpose. The constants are calculated by determining the fraction of BDP-SH deposited on the surface from a solution with a given molar fraction, directly measuring the absorption spectra of BDP-SH on the slides. Then, the exchange constant for the competitive deposition between 1-dodecanethiol and PEG5000 thiol is calculated by combining their exchange constants with BDP-SH. This allows to predict the fraction of the two colorless thiols coating the silver nanoparticles slides obtained from a toluene solution with a given molar fraction, for example, of PEG5000 thiol. The correctness of the calculated surface fraction is verified by studying the coating competition between 1-dodecanethiol and a PEG5000 thiol remotely modified with a strongly absorbing fluorescein fragment.     

Adsorption of CdSe nanoparticles to thiolated TiO2 surfaces: influence of intralayer disulfide formation on CdSe surface coverage

Mixed monolayers of hexadecanoic acid (HDA) and 16-mercaptohexadecanoic acid (MHDA) were adsorbed to nanocrystalline TiO2 films, and CdSe nanoparticles were attached to the mixed monolayer functionalized surfaces. IR absorption spectroscopy was used to characterize the equilibrium binding of HDA and MHDA to TiO2. Surface adduct formation constants (Kad) of (4+/-2)x10(3) M(-1) and (6+/-4)x10(3) M(-1) were measured for HDA and MHDA, respectively. CdSe nanoparticles were adsorbed to the terminal thiol groups of MHDA. The surface coverage of CdSe was greater on mixed monolayers, consisting of approximately 12% MHDA and 88% HDA, than on pure MHDA monolayers. A mechanism is proposed wherein intralayer disulfide formation between MHDA thiol groups causes decreased reactivity toward CdSe nanoparticles. Disulfide formation is less significant at low fractional surface coverages of MHDA. The mechanism is supported by an increase of CdSe adsorption upon chemical reduction of surface disulfides to thiols. Our findings highlight the effect of intermolecular interactions on the affinity of nanoparticles for monolayer-functionalized surfaces.     

Effect of amino,hydroxyl, and carboxyl terminal groups of alkyl chains of self-assembled monolayers on the adsorption pattern of gold nanoparticles

The adsorption pattern of gold nanoparticles (AuNPs) on functionalized self-assembled monolayers (SAMs) produced on a Au(111) surface was characterized. The Au(111) was modified with 11-amino-1-undecanethiol hydrochloride (AUT), 11-mercapto-1-undecanol (MUT), or 11-mercaptoundecanoic acid (MUA) at an elevated temperature and pressure. The AuNPs aggregated on the AUT-SAM surface, whereas they were well dispersed on the MUT-SAM surface and localized on the MUA-SAM surface. The results suggest that interactions between AuNPs differ according to the degree of peeling of citrate-layer-capped AuNPs. The degree of peeling, which is related to both the surface randomness of the SAMs and the functional characteristics of the terminal group of each SAM, was discussed on the basis of scanning tunneling microscopy observations, X-ray photoelectron spectroscopic analyses, and contact angle measurements. Our study shows that AuNP patterns can be controlled by changing the terminal group of the alkyl thiol SAM on a Au(111) surface.     

Modification of Ag nanoparticles with mixed thiols for improved SERS detection of poorly adsorbing target molecules: detection of MDMA

Here we report an example of a mixed thiol monolayer on the surface of Ag nanoparticles which promotes adsorption and quantitative SERS detection of 3,4-methylenedioxymethamphetamine (MDMA, "Ecstasy"); the thiols in the mixed monolayers act synergistically since MDMA does not adsorb onto colloids modified with either of the thiols separately.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

Study of the interaction of beta-cyclodextrin with phospholipid monolayers by surface pressure measurements and fluorescence microscopy

The interaction of beta-cyclodextrin (beta-CD) with different lipids has been studied, using Langmuir monolayers kept at constant surface pressure or constant spreading surface. Results show that beta-CD, injected beneath the monolayer, is able to desorb unsaturated palmitoyloleoylphosphatidylcholine (POPC) and sphingomyelin (SM) under specific experimental conditions. In this last case, SM monolayers, labeled with the fluorescent NBD-PC probe, were also observed by fluorescence microscopy, before and after beta-CD injection. Images show that SM monolayers are more homogeneous after beta-CD injection, because of the lipid desorption. At last, it seems that lipid desorption occurs only in a restricted surface pressure range, depending on the lipid.     

Effect of molecular surface packing on the enzymatic activity modulation of an anchored protein on phospholipid Langmuir monolayers

The catalytic activity of a glycosylphosphatidylinositol (GPI)-anchored alkaline phosphatase has been studied in Langmuir phospholipid monolayers at different surface pressures. The enzyme substrate, p-nitrophenyl phosphate, was injected into the subphase of mixed enzyme/lipid Langmuir monolayers. Its hydrolysis product was followed by monitoring the absorbance at 410 nm in situ in the monolayer subphase of the Langmuir trough. Several surface pressures, corresponding to different molecular surface densities, were attained by lateral compression of the monolayers. The morphology of the monolayers, observed by fluorescence microscopy, showed three different types of domains owing to the heterogeneous partition of the enzyme within the mixed enzyme/lipid film. The catalytic activity was modulated by the enzyme surface density, and it increased until a pressure of 18 mN/m was reached, but it decreased significantly when the equilibrium in-plane elasticity (surface compressional modulus) increased more noticeably, resulting in alterations in the interface morphology. A model for the modulation of the enzyme orientation and catalytic activity by lipid/enzyme surface morphology and enzyme surface packing at the air/liquid interface is proposed. The results might have an important impact on the comprehension of the enzymatic activity regulation of GPI-anchored proteins in biomembranes.     

Packing, flipping, and buckling transitions in compressed monolayers of ellipsoidal latex particles

The behavior of monolayers of monodisperse prolate ellipsoidal latex particles with the same surface chemistry but varying aspect ratio has been studied experimentally. Particle monolayers at an air-water interface were subjected to compression in a Langmuir trough. When surface pressure measurements and microscopy observations were combined, possible structural transitions were evaluated. Ellipsoids of a sufficiently large aspect ratio display a less abrupt increase in the compression isotherms than spherical particles. Microscopic observations reveal that a sequence of transitions is responsible for this more gradual increase of the surface pressure. When a percolating aggregate network is used as the starting point, locally ordered regions appear progressively. When it reaches a certain surface pressure, the system "jams", and in-plane rearrangements are no longer possible at this point. A highly localized yielding of the particle network is observed. The compressional stress is relieved by flipping the ellipsoids into an upright position and by expelling particles from the monolayer. The latter does not occur for spherical particles with similar dimensions and surface chemistry. In the final stage of compression, buckling of the monolayer as a whole was observed. The effect of aspect ratio on the pressure area isotherms and on the obtained percolation and packing thresholds was quantified.     

Directionally oriented LB films of an OPE derivative: assembly, characterization, and electrical properties

Langmuir films have been fabricated from 4-[4'-(4'-thioacetyl-phenyleneethynylene)-phenyleneethynylene]-aniline (NOPES) after cleavage of the thioacetyl protecting group. Characterization by surface pressure vs area per molecule isotherms and Brewster angle microscopy reveal the formation of a high quality monolayer at the air-water interface. One layer Langmuir-Blodgett (LB) films were readily fabricated by the transfer of the NOPES Langmuir film onto solid substrates. X-ray photoelectron spectroscopy (XPS), surface polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS), and quartz crystal microbalance (QCM) experiments conclusively demonstrate the formation of one layer LB films in which the functional group associated with binding to the substrate can be tailored by the film transfer conditions. Using LB methods this molecule could be transferred to gold samples with either the amine or thiol group attached to the gold surface. The amine group is directly attached to the gold substrate (Au-NH(2)-OPE-SH) when the substrate is initially immersed in the subphase and withdrawn during the transfer process; in contrast, monomolecular films in which the thiolate group is attached to the gold substrate (Au-S-OPE-NH(2)) are obtained when the substrate is initially out of the subphase and immersed during the transfer process. The morphology of these films was analyzed by atomic force microscopy (AFM), showing the formation of homogeneous layers. Film homogeneity was confirmed by cyclic voltammetry, which revealed a large passivation of gold electrodes covered by NOPES monolayers. Electrical properties for both polar orientated junctions have been investigated by scanning tunnelling microscopy (STM), with both orientations featuring a nonrectifying behavior.     

Novel, highly selective gold nanoparticle patterning on surfaces using pure water

We present a simple, novel procedure to selectively deposit gold nanoparticles using pure water. It enables patterning of nanoparticle monolayers with a remarkably high degree of selectivity on flat as well as microstructured oxide surfaces. We demonstrate that water molecules form a thin "capping" layer on exposed thiol molecules within the mercaptan self-assembled layer. This reversible capping of water molecules locally "deactivates" the thiol groups, therewith inhibiting the binding of metallic gold nanoparticles to these specific areas. This amazing role of water molecules can be used as a tool to pattern flat as well as structured surfaces with gold nanoparticles.     

气液界面磷脂单分子膜的表面增强拉曼光谱

采用纳米银胶作为成膜亚相, 原位获得了十八胺单分子膜、十八胺/卵磷脂复合膜的表面增强拉曼信号.研究表明,增强主要来源于亚相中的银粒子与成膜分子之间较强的作用.通过在磷脂膜内添加十八胺分子辅助增强而获取了卵磷脂的分子振动信息.     

Studies on 2D hybrid films of half surfactant-covered Au nanoparticles at the air/water interface

A hybrid monolayer film of Au nanoparticles, half-covered with dioctadecyldimethylammonium chloride (DODAC), was prepared at the air/water interface and characterized using transmission electron microscopy (TEM), a quartz-crystal microbalance, and infrared spectra measurements. TEM images of the hybrid film showed that the distribution of Au nanoparticles depends on the surface density of DODAC and reaction time. IR spectral data provided evidence for a surface-enhanced effect of the Au nanoparticles. The wavenumber of CH(2)-stretch vibrations of DODAC in the infrared external reflection spectra revealed that the DODAC molecules were adsorbed onto the Au nanoparticles in a close-packed crystalline state for any surface density of DODAC, which is different from the usual behavior of Langmuir monolayers.     

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.     

Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

Poly(acrylic acid) polyelectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were used. The binding strength to the gold surface turned out to be of crucial importance for the formation of uniform brush layers after acidic hydrolysis. The monolayers and polymer brushes were characterized by ellipsometry, infrared spectroscopy, water contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Their interaction with [(diglycidylamino)propyl]silsesquioxane nanoparticles at various pH values was studied by surface plasmon resonance.     

Langmuir–Blodgett monolayer modified electrodes based on thiol-derived bifunctional alkanes

The well-known strong affinity of the OH terminal group towards water and specific interaction of the thiol terminal group with gold lead us to propose the use of bifunctional α,ω-hydroxyalkanethiol for the controlled deposition of monolayers on electrodes by the modified Langmuir–Blodgett method. The procedure allows us to cover the metal substrates with a well-ordered and blocking monolayer of bifunctional α,ω-hydroxyalkanethiol. Cyclic voltammetry was used to probe the Langmuir–Blodgett monolayer modified electrode.     

Interactions of a fluoroaryl surfactant with hydrogenated, partially fluorinated, and perfluorinated surfactants at the air/water interface

A novel surfactant containing pentafluorophenyl moiety attached at the terminal position of undecanol (11,11-difluoro-11-(pentafluorophenyl)undecan-1-ol, abbr. PBD) was synthesized and employed for the Langmuir monolayer characterization and miscibility studies with a semifluorinated alkane (perfluorodecyleicosane, abbr. F10H20) and four alcohols differing in the degree of fluorination in their hydrophobic chains: octadecanol (C18OH), perfluorooctyldecanol (F8H10OH), perfluoroisononyldecanol (iF9H10OH) and 1H,1H-perfluorooctadecanol (F18OH). Pure monolayers of all of the investigated surfactants as well as their mixtures were investigated with surface pressure-area isotherms complemented by Brewster angle microscopy (BAM) images. PBD was found to form stable Langmuir monolayers of liquid-expanded character. Characteristic dendritic structures were formed at the very early stage of compression and remained up to the vicinity of collapse, where 3D crystallites appeared. 2D miscibility studies revealed that PBD forms mixed monolayers with the investigated semifluorinated alkane (F10H20) as well as with perfluorinated alcohol (F18OH) within the whole composition range, do not mix with octadecanol to the fully hydrogenated alcohol, whereas it is partially miscible (up to a certain surface pressure value) with the studied semifluorinated alcohols. The analysis of the miscibility derived from the surface pressure-area isotherms (collapse pressure vs composition dependencies) agrees well with BAM images. Molecular interactions in the investigated systems have been quantified with interaction parameter, alpha.     

Fabrication of metal nanoparticle monolayers on amphiphilic poly(amido amine) dendrimer Langmuir films

A newly designed 1.5th generation poly(amido amine) dendrimer with an azacrown core, hexylene spacers, and octyl terminals was spread on gold nanoparticle (Au-NP) suspension. The surface pressure-area isothermal curves indicated that the molecular area of dendrimer on Au-NP suspension was significantly smaller than that on water, indicating the formation of dendrimer/Au-NP composites. The dendrimer Langmuir films on the Au-NP suspension were transferred to copper grids at various surface pressures and observed by transmission electron microscopy. The transferred films consisted of a fractal-like network of nanoparticles at low surface pressure and of a defect-rich monolayer of nanoparticles at high surface pressure. From these results, it was suggested that the dendrimers bind Au-NPs, and dendrimer/Au-NP composites formed networks or monolayers at the interface. From the intensity decrease of the Au plasmon band of Au-NP suspension after the formation of composite, it was estimated that some (approximately 14) dendrimer molecules bind to one Au-NP. Furthermore, neutron reflectivity at the air/suspension interface and X-ray reflectivity of the film transferred on a silicon substrate revealed that the dendrimer molecules are localized on the upper-half surface of Au-NP. Metal affinity of azacrown, flexibility of hexylene spacer, and amphiphilicity of dendrimer with octyl terminals played important roles for the formation of dendrimer/Au-NP hybrid films. The present investigation proposed a new method to fabricate the self-assembled functional polymer/nanoparticle hybrid film.