Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

α,α′‐Diarylacenaphtho[1,2‐c]phosphole P‐Oxides: Divergent Synthesis and Application to Cathode Buffer Layers in Organic Photovoltaics

A divergent method for the synthesis of α,α′‐diarylacenaphtho[1,2‐c]phosphole P‐oxides has been established; α,α′‐dibromoacenaphtho[c]phosphole P‐oxide, which was prepared through a Ti^II‐mediated cyclization of 1,8‐bis(trimethylsilylethynyl)naphthalene, underwent a Stille coupling with three different kinds of aryltributylstannanes to afford the α,α′‐diarylacenaphtho[c]phosphole P‐oxides in moderate to good yields. X‐ray crystallographic analyses and UV/Vis absorption/fluorescence measurements have revealed that the degree of π‐conjugation, the packing motif, the electron‐accepting ability, and the thermal stability of the acenaphtho[c]phosphole π‐systems are finely tunable with the α‐aryl substituents. All the P?O and P?S derivatives exhibited high stability in their electrochemically reduced state. To use this class of arene‐fused phosphole π‐systems as n‐type semiconducting materials, we evaluated device performances of the bulk heterojunction organic photovoltaics (OPV) that consist of poly(3‐hexylthiophene), an indene‐C₇₀ bisadduct, and a cathode buffer layer. The insertion of the diarylacenaphtho[c]phosphole P‐oxides as the buffer layer was found to improve the power conversion efficiency of the polymer‐based OPV devices.     

Thieno[3,4‐c]phosphole‐4,6‐dione: A Versatile Building Block for Phosphorus‐Containing Functional π‐Conjugated Systems

A versatile phosphorus‐containing π‐conjugated building block, thieno[3,4‐c]phosphole‐4,6‐dione (TPHODO), has been developed. The utility of this simple but hitherto unknown building block has been demonstrated by preparing novel functional organophosphorus compounds and bandgap‐tunable conjugated polymers.     

Preparation of Dithienylphospholes by 1,1‐Carboboration

In this study the scope of the 1,1‐carboboration reaction was extended to the preparation of mixed heterole‐based conjugated π‐systems. Two arylbis(alkynyl)phosphane starting materials 2 were synthesized bearing two thiophene isomers at the alkyne units and the bulky tipp‐substituent (tipp=2,4,6‐triisopropylphenyl) at the phosphorous atom. The bis(thienylethynyl)phosphanes 2 were converted into the corresponding 2,5‐thienyl‐substituted 3‐borylphospholes 4 in a double 1,1‐carboboration reaction sequence employing the strongly electrophilic B(C₆F₅)₃ reagent under mild reaction conditions. Subsequent Suzuki–Miyaura type cross‐coupling yielded the corresponding 3‐phenylphospholes 7 in a one‐pot procedure from phosphanes 2 in high yields. Phospholes 7 were converted into the respective phosphole oxides 8 . A photophysical characterization of derivatives 7 and 8 was carried out. The results presented here demonstrate the suitability of the 1,1‐carboboration reaction for the preparation of phosphole‐/thiophene‐based, light‐emitting systems.     

Tuning the Spectroscopic,Electrochemical, and Photovoltaic Properties of Triaryl Amine Based Sensitizers through Ring‐Fused Thiophene Bridges

The ring‐fused thiophene derivatives benzo[c]thiophene and its precursor bicyclo[2.2.2]octadiene (BCOD) have been introduced as π‐conjugated spacers for organic push–pull sensitizers with dihexyloxy‐substituted triphenylamine as donor and cyanoacrylic acid as acceptor ( OL1 , OL2 , OL3 , OL4 , OL5 , OL6 ). The effects of the fused ring on the spectroscopic and electrochemical properties of these sensitizers and their photovoltaic performance in dye‐sensitized solar cells have been evaluated. Introduction of a binary benzo[c]thiophene and ethylenedioxy thiophene as π bridge caused a significant red shift of the characteristic intramolecular charge‐transfer band to 642 nm. It is found that the sensitizer OL3 , which contains one benzo[c]thiophene unit as π linker, gives the highest overall conversion efficiency of 5.03 % among all these dyes.     

Synthesis of π‐conjugated polymer containing both thiophene and phosphole sulfide in the main chain by simultaneous post‐element transformation of organotitanium polymer

The synthesis and unique optoelectronic features of a π‐conjugated polymer containing both thiophene and 1‐phenylphosphole sulfide units (multiple heteroles) in the main chain by the post‐element transformation of a regioregular organometallic polymer possessing titanacyclopentadiene‐2,5‐diyl unit are described. The π‐conjugated polymer containing multiple heteroles was obtained in 73% yield by the simultaneous reaction of the organotitanium polymer with sulfur monochloride and dichlorophenylphosphine (0.6 equiv each), whose number‐average molecular weight (M_n) and the molecular‐weight distribution (M_w/M_n) were estimated to be 11,000 and 3.4, respectively, by the size exclusion chromatography (SEC). The π‐conjugated polymer thus obtained was found to have the high HOMO and the low LUMO energy levels due to the electron‐rich thiophene and electron‐deficient phosphole sulfide units, respectively, as supported by its cyclic voltammetry (CV) analysis. Compared to a mixture of a polymer containing sole thiophene‐unit and that containing sole phosphole sulfide units, the π‐conjugated polymer‐containing multiple heteroles proved to exhibit interesting optical properties. For example, a specific emission peak was observed at 608 nm in the photoluminescence spectrum, which was not observed in the case of the thiophene‐containing polymer, the phosphole‐containing polymer, and their mixture. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2519–2525     

Benzo[b]phosphole‐Containing π‐Electron Systems: Synthesis Based on an Intramolecular trans‐Halophosphanylation and Some Insights into Their Properties

The intramolecular trans‐halophosphanylation of 2‐(aminophosphanyl)phenylacetylenes mediated by PBr₃ followed by the oxidation with H₂O₂, produces 3‐bromobenzo[b]phosphole oxide derivatives. This cyclization is also used for the synthesis of a 3‐iodo derivative by conducting the reaction in the presence of LiI. Based on this synthetic method, various benzophosphole‐containing π‐conjugated compounds, including a phosphoryl and methylene‐bridged stilbene 10 , 2,3,6,7‐tetraphenylbenzo[1,2‐b:4,5‐b′]diphosphole‐P,P′‐dioxides 11 , and their phosphine sulfide derivatives 12 , are synthesized. The study of the structure–property relationships in a series of the bridged stilbenes, including a bis(methylene)‐bridged stilbene 10 , and a bis(phosphoryl)‐bridged stilbene, reveals that as the contribution of the phosphoryl groups increased, the absorption and emission maxima substantially shift to longer wavelengths. The intrinsic substituent effects of the phosphoryl group in this skeleton are to decrease the oscillator strength of the electronic transition and thus decrease the radiative decay rate constants from the singlet excited state. Nevertheless, these compounds maintain high fluorescence quantum yields (Φ_F>0.8) owing to the significantly retarded nonradiative decay process. In the study of the benzodiphosphole derivatives 11 and 12 , their cyclic voltammetry revealed that both of the phosphoryl and phosphine sulfide derivatives have low reduction potentials (?1.7 to ?1.8 V vs ferrocene/ferrocenium couple) with the high reversibility of the redox waves. These compounds also showed high thermal stabilities with the high glass transition temperatures of 147–159 °C, indicative of their potential utilities as amorphous materials.     

ortho‐, meta‐, and para‐Dihydroindenofluorene Derivatives as Host Materials for Phosphorescent OLEDs

This work reports the first structure–properties relationship study of ortho [2,1‐c]‐, meta [1,2‐a]‐, and para [1,2‐b]dihydroindenofluorenes, highlighting the influence of bridge rigidification on the electronic properties. This study has made it possible to devise an extended π‐conjugated molecule with both a high triplet state energy level and excellent thermal and morphological stability. As a proof of concept, dihydroindenofluorenes were used as the host in sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs) w ith high performance.     

Assembly of π‐Conjugated Phosphole Azahelicene Derivatives into Chiral Coordination Complexes: An Experimental and Theoretical Study

Aza[n]helicene phosphole derivatives have been prepared from aza[n]helicene diynes by the Fagan–Nugent route. Their photophysical properties (UV/Vis absorption and emission behavior) have been evaluated. Their behavior as P,N chelates towards coordination to Pd^II and Cu^I has been investigated: metal–bis(aza[n]helicene phosphole) assemblies are formed by a highly stereoselective coordination process, as demonstrated by X‐ray crystallography. An aza[6]helicene phosphole bearing an enantiopure helicene part has been obtained, which allows the preparation of enantiopure Pd^II and Cu^I complexes with original topologies and high molar rotation (MR) and circular dichroism (CD). The structure–property relationship established from the experimental data has been studied in detail by theoretical studies (TDDFT calculations of UV/Vis, CD, and MR). Aza[n]helicene phosphole derivatives show π conjugation extended over the entire molecule, and its influence on the MR of aza[6]helicene phosphole 5 c has been demonstrated. Finally, it has been shown that the nature of the metal (coordination geometry and electronic interaction) can have a great impact on the amplitude of the chiroptical properties in metal–bis(aza[n]helicene phosphole) assemblies.     

Synthesis and characterization of novel π‐conjugated polymers with phosphole ring derivatives

Novel π‐conjugated polymers ( 8 – 10 ) were prepared by the palladium‐catalyzed Sonogashira coupling reaction of three kinds of phosphole‐ring‐containing monomers with 2,5‐dihexyloxyl‐1,4‐diethynylbenzene. The obtained polymers ( 8 – 10 ) were regioregulated with the 2,5‐substituted phosphole ring in the polymer main chain and characterized with ¹H, ¹³C, and ³¹P NMR and FTIR. Polymers 8 – 10 were found to have an extended π‐conjugated system according to the results of UV–vis absorption spectra. In the fluorescence emission spectra of 8 – 10 , moderate emission peaks were observed in the visible blue‐to‐green region. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2867–2875, 2007     

Synthesis,crystal structure studies and solvatochromic behaviour of two 2‐{5‐[4‐(dimethylamino)phenyl]penta‐2,4‐dien‐1‐ylidene}malononitrile derivatives

The synthesis, crystal structure studies and solvatochromic behavior of 2‐{(2E,4E)‐5‐[4‐(dimethylamino)phenyl]penta‐2,4‐dien‐1‐ylidene}malononitrile, C₁₆H₁₅N₃ (DCV[3]), and 2‐{(2E,4E,6E)‐7‐[4‐(dimethylamino)phenyl]hepta‐2,4,6‐trien‐1‐ylidene}malononitrile, C₁₈H₁₇N₃ (DCV[4]), are reported and discussed in comparison with their homologs having a shorter length of the π‐conjugated bridge. The compounds of this series have potential use as nonlinear materials with second‐order effects due to their donor–acceptor structures. However, DCV[3] and DCV[4] crystallized in the centrosymmetric space group P2₁/c which excludes their application as nonlinear optical materials in the crystalline state. They both crystallize with two independent molecules having the same molecular conformation in the asymmetric unit. The series DCV[1]–DCV[4] demonstrated reversed solvatochromic behavior in toluene, chloroform, and acetonitrile.     

Effects of donor unit and π‐bridge on photovoltaic properties of D–A copolymers based on benzo[1,2‐b:4,5‐c']‐dithiophene‐4,8‐dione acceptor unit

A series of donor‐π‐acceptor (D‐π‐A) conjugated copolymers ( PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT ), based on benzo[1,2‐b:4,5‐c']dithiophene‐4,8‐dione (BDD) acceptor unit with benzodithiophene (BDT) or dithienosilole (DTS) as donor unit, alkylthiophene (AT) or thieno[3,2‐b]thiophene (TT) as conjugated π‐bridge, were designed and synthesized for application as donor materials in polymer solar cells (PSCs). Effects of the donor unit and π‐bridge on the optical and electrochemical properties, hole mobilities, and photovoltaic performance of the D‐π‐A copolymers were investigated. PSCs with the polymers as donor and PC₇₀BM as acceptor exhibit an initial power conversion efficiency (PCE) of 5.46% for PBDT‐AT , 2.62% for PDTS‐AT , 0.82% for PBDT‐TT , and 2.38% for PDTS‐TT . After methanol treatment, the PCE was increased up to 5.91%, 3.06%, 1.45%, and 2.45% for PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT , respectively, with significantly increased FF. The effects of methanol treatment on the photovoltaic performance of the PSCs can be ascribed to the increased and balanced carrier transport and the formation of better nanoscaled interpenetrating network in the active layer. The results indicate that both donor unit and π‐bridge are crucial in designing a D‐π‐A copolymer for high‐performance photovoltaic materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1929–1940     

Aggregation‐Induced Delayed Fluorescence Based on Donor/Acceptor‐Tethered Janus Carborane Triads: Unique Photophysical Properties of Nondoped OLEDs

Luminescent materials consisting of boron clusters, such as carboranes, have attracted immense interest in recent years. In this study, luminescent organic–inorganic conjugated systems based on o‐carboranes directly bonded to electron‐donating and electron‐accepting π‐conjugated units were elaborated as novel optoelectronic materials. These o‐carborane derivatives simultaneously possessed aggregation‐induced emission (AIE) and thermally activated delayed fluorescence (TADF) capabilities, and showed strong yellow‐to‐red emissions with high photoluminescence quantum efficiencies of up to 97 % in their aggregated states or in solid neat films. Organic light‐emitting diodes utilizing these o‐carborane derivatives as a nondoped emission layer exhibited maximum external electroluminescence quantum efficiencies as high as 11 %, originating from TADF.     

A Highly Modular One‐Pot Multicomponent Approach to Functionalized Benzo[b]phosphole Derivatives

Benzo[b]phosphole derivatives have attracted significant attention for their unique optoelectronic properties with potential for application in materials science. Herein we report a modular approach to a benzo[b]phosphole derivative based on a one‐pot sequential coupling of an arylzinc reagent, an alkyne, dichlorophenylphosphine (or phosphorus trichloride and a Grignard reagent), and an oxidant (for example H₂O₂, S, or Se). The approach allows for the construction of a library of previously inaccessible, structurally diverse benzo[b]phosphole derivatives with unprecedented ease.     

Dibenzo[d,f][1,3] dioxepine derivatives: A review

This review presents a survey of synthetic methods and reaction mechanism of the dibenzo[d,f][1,3] dioxepine derivatives. Furthermore, the influence of the substituent groups in 6,6′‐position of dibenzo[d,f][1,3] dioxepine on their conformation is explored. The functional dibenzo[d,f][1,3] dioxepine synthetically versatiles substrate, as they can be used for synthesis of a large variety of π‐conjugated oligomer and polymer containing heterocyclic compounds, such as dibromination dibenzo[d,f][1,3] dioxepine derivative as a raw material of synthesis for organic semiconductor polymers. The synthetic and fluorescent property of π‐conjugated polymers basic on dibenzo[d,f][1,3] dioxepine also is explored. J. Heterocyclic Chem., (2012).     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Ruthenium‐Grafted Vinylhelicenes: Chiroptical Properties and Redox Switching

The properties of mono‐ and bis‐Ru–vinyl[6]helicene complexes ( 2 a and 2 b , respectively), recently synthesized by using molecular engineering of helicenes based on the grafting of lateral organometallic substituents on the π‐helical backbone through a vinyl bridge, are presented. These helicene derivatives are thoroughly characterized, with special attention given to their chiroptical properties and redox switching activity. The UV/Vis and electronic circular dichroism (ECD) spectra of P and M enantiopure species, both in the neutral and oxidized states ([ 2 a ] ^{. +}, [ 2 b ] ^{. +}, and [ 2 b ]²⁺), are analyzed with the aid of quantum‐chemical calculations. The extended π‐conjugation facilitated by the vinyl moiety, clearly visible in the electronic structures of 2 a , b , introduces new active bands in the ECD spectra that consequently lead to a significant increase in optical rotation of Ru–vinylhelicenes compared with the organic precursors. The vibrational circular dichroism (VCD) spectra were measured and calculated for both the organic and organometallic species and constitute the first examples of VCD for metal‐based helicene derivatives. Finally, the redox‐triggered chiroptical switching activity of 2 a , b is examined in detail by using ECD spectroscopy. The modifications of the ECD spectra in the UV/Vis and NIR region are well reproduced and rationalized by calculations.     

An Air‐Stable Semiconducting Polymer Containing Dithieno[3,2‐b:2′,3′‐d]arsole

Arsole‐containing conjugated polymers are a practically unexplored class of materials despite the high interest in their phosphole analogues. Herein we report the synthesis of the first dithieno[3,2‐b;2′,3′‐d]arsole derivative, and demonstrate that it is stable to ambient oxidation in its +3 oxidation state. A soluble copolymer is obtained by a palladium‐catalyzed Stille polymerization and demonstrated to be a p‐type semiconductor with promising hole mobility, which was evaluated by field‐effect transistor measurements.     

From‐Core and From‐End Direct CH Arylations: A Step‐Saving New Synthetic Route to Thieno[3,4‐c]pyrrole‐4,6‐dione (TPD)‐Incorporated D‐‐π–A–π–D Functional Oligoaryls

In contrast to the traditional multistep synthesis, herein an efficient and fewer‐steps new synthetic strategy is demonstrated for the facile preparation of organic‐electronically important D–π–A–π–D‐type oligoaryls through sequential direct C?H arylations. This methodology has shown that the synthesis of thieno[3,4‐c]pyrrole‐4,6‐dione (TPD)‐ or furano[3,4‐c]pyrrole‐4,6‐dione (FPD)‐centred target molecules could be accessed step‐economically either from the core structure (acceptor) or from the end structure (donor), which supplied a more flexible and succinct new synthetic alternative to the preparation of the π‐functional small‐molecule semiconducting materials. In addition, optical and electrochemical properties of the synthesized oligoaryls were examined.     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988