Probing the Lipid Annular Belt by Gas‐Phase Dissociation of Membrane Proteins in Nanodiscs

Interactions between membrane proteins and lipids are often crucial for structure and function yet difficult to define because of their dynamic and heterogeneous nature. Here, we use mass spectrometry to demonstrate that membrane protein oligomers ejected from nanodiscs in the gas phase retain large numbers of lipid interactions. The complex mass spectra that result from gas‐phase dissociation were assigned using a Bayesian deconvolution algorithm together with mass defect analysis, allowing us to count individual lipid molecules bound to membrane proteins. Comparison of the lipid distributions measured by mass spectrometry with molecular dynamics simulations reveals that the distributions correspond to distinct lipid shells that vary according to the type of protein–lipid interactions. Our results demonstrate that nanodiscs offer the potential for native mass spectrometry to probe interactions between membrane proteins and the wider lipid environment.     

A Mass‐Spectrometry‐Based Approach to Distinguish Annular and Specific Lipid Binding to Membrane Proteins

Membrane proteins engage in a variety of contacts with their surrounding lipids, but distinguishing between specifically bound lipids, and non‐specific, annular interactions is a challenging problem. Applying native mass spectrometry to three membrane protein complexes with different lipid‐binding properties, we explore the ability of detergents to compete with lipids bound in different environments. We show that lipids in annular positions on the presenilin homologue protease are subject to constant exchange with detergent. By contrast, detergent‐resistant lipids bound at the dimer interface in the leucine transporter show decreased k_off rates in molecular dynamics simulations. Turning to the lipid flippase MurJ, we find that addition of the natural substrate lipid‐II results in the formation of a 1:1 protein–lipid complex, where the lipid cannot be displaced by detergent from the highly protected active site. In summary, we distinguish annular from non‐annular lipids based on their exchange rates in solution.     

Cubosomes: The Next Generation of Smart Lipid Nanoparticles?

Cubosomes are highly stable nanoparticles formed from the lipid cubic phase and stabilized by a polymer based outer corona. Bicontinuous lipid cubic phases consist of a single lipid bilayer that forms a continuous periodic membrane lattice structure with pores formed by two interwoven water channels. Cubosome composition can be tuned to engineer pore sizes or include bioactive lipids, the polymer outer corona can be used for targeting and they are highly stable under physiological conditions. Compared to liposomes, the structure provides a significantly higher membrane surface area for loading of membrane proteins and small drug molecules. Owing to recent advances, they can be engineered in vitro in both bulk and nanoparticle formats with applications including drug delivery, membrane bioreactors, artificial cells, and biosensors. This review outlines recent advances in cubosome technology enabling their application and provides guidelines for the rational design of new systems for biomedical applications.     

Analysis of lipid surface area in protein-membrane systems combining Voronoi tessellation and Monte Carlo integration methods

All-atom molecular dynamics (MD) simulation has become a powerful research tool to investigate structural and dynamical properties of biological membranes and membrane proteins. The lipid structures of simple membrane systems in recent MD simulations are in good agreement with those obtained by experiments. However, for protein-membrane systems, the complexity of protein-lipid interactions makes investigation of lipid structure difficult. Although the area per lipid is one of the essential structural properties in membrane systems, the area in protein-membrane systems cannot be computed easily by conventional approaches like the Voronoi tessellation method. To overcome this limitation, we propose a new method combining the two-dimensional Voronoi tessellation and Monte Carlo integration methods. This approach computes individual surface areas of lipid molecules not only in bulk lipids but also in proximity to membrane proteins. We apply the method to all-atom MD trajectories of the sarcoplasmic reticulum Ca(2+)-pump and the SecY protein-conducting channel. The calculated lipid surface area is in agreement with experimental values and consistent with other structural parameters of lipid bilayers. We also observe changes in the average area per lipid induced by the conformational transition of the SecY channel. Our method is particularly useful for examining equilibration of lipids around membrane proteins and for analyzing the time course of protein-lipid interactions.     

beta-Barrel membrane bacterial proteins: structure, function, assembly and interaction with lipids

Membrane proteins, although constituting about one-third of all proteins encoded by the genomes of living organisms, are still strongly underrepresented in the database of 3D protein structures, which reflects the big challenge presented by this class of proteins. Structural biologists, by employing electron and x-ray approaches, are continuously revealing new and fundamental insights into the structure, function, assembly and interaction with lipids of membrane proteins. To date, two structural motifs, alpha-helices and beta-sheets, have been found in membrane proteins and interestingly these two structural motives correlate with the location: while alpha-helical bundles are most often found in the receptors and ion channels of plasma and endoplasmic reticulum membranes, beta-barrels are restricted to the outer membrane of Gram-negative bacteria and in the mitochondrial membrane, and represent the structural motif used by several microbial toxins to form cytotoxic transmembrane channels. The beta-barrel, while being a rigid and stable motif is a versatile scaffold, having a wide variation in the size of the barrel, in the mechanism to open or close the gate and to impose selectivity on substrates. Even if the number of x-ray structures of integral membrane proteins has greatly increased in recent years, only a few of them provide information at a molecular level on how proteins interact with lipids that surround them in the membrane. The detailed mechanism of protein lipid interactions is of fundamental importance for understanding membrane protein folding, membrane adsorption, insertion and function in lipid bilayers. Both specific and unspecific interactions with lipids may participate in protein folding and assembly.     

Towards a native environment: structure and function of membrane proteins in lipid bilayers by NMR

Solid-state NMR (ssNMR) is a versatile technique that can be used for the characterization of various materials, ranging from small molecules to biological samples, including membrane proteins. ssNMR can probe both the structure and dynamics of membrane proteins, revealing protein function in a near-native lipid bilayer environment. The main limitation of the method is spectral resolution and sensitivity, however recent developments in ssNMR hardware, including the commercialization of 28 T magnets (1.2 GHz proton frequency) and ultrafast MAS spinning (<100 kHz) promise to accelerate acquisition, while reducing sample requirement, both of which are critical to membrane protein studies. Here, we review recent advances in ssNMR methodology used for structure determination of membrane proteins in native and mimetic environments, as well as the study of protein functions such as protein dynamics, and interactions with ligands, lipids and cholesterol.

Solid-state NMR (ssNMR) is a versatile technique that can be used for the characterization of various materials, ranging from small molecules to biological samples, including membrane proteins, as reviewed here.     

Time to Face the Fats: What Can Mass Spectrometry Reveal about the Structure of Lipids and Their Interactions with Proteins?

Since the 1950s, X-ray crystallography has been the mainstay of structural biology, providing detailed atomic-level structures that continue to revolutionize our understanding of protein function. From recent advances in this discipline, a picture has emerged of intimate and specific interactions between lipids and proteins that has driven renewed interest in the structure of lipids themselves and raised intriguing questions as to the specificity and stoichiometry in lipid-protein complexes. Herein we demonstrate some of the limitations of crystallography in resolving critical structural features of ligated lipids and thus determining how these motifs impact protein binding. As a consequence, mass spectrometry must play an important and complementary role in unraveling the complexities of lipid-protein interactions. We evaluate recent advances and highlight ongoing challenges towards the twin goals of (1) complete structure elucidation of low, abundant, and structurally diverse lipids by mass spectrometry alone, and (2) assignment of stoichiometry and specificity of lipid interactions within protein complexes.     

CHARMM‐GUI Membrane Builder toward realistic biological membrane simulations

CHARMM‐GUI Membrane Builder, http://www.charmm‐gui.org/input/membrane , is a web‐based user interface designed to interactively build all‐atom protein/membrane or membrane‐only systems for molecular dynamics simulations through an automated optimized process. In this work, we describe the new features and major improvements in Membrane Builder that allow users to robustly build realistic biological membrane systems, including (1) addition of new lipid types, such as phosphoinositides, cardiolipin (CL), sphingolipids, bacterial lipids, and ergosterol, yielding more than 180 lipid types, (2) enhanced building procedure for lipid packing around protein, (3) reliable algorithm to detect lipid tail penetration to ring structures and protein surface, (4) distance‐based algorithm for faster initial ion displacement, (5) CHARMM inputs for P₂₁ image transformation, and (6) NAMD equilibration and production inputs. The robustness of these new features is illustrated by building and simulating a membrane model of the polar and septal regions of E. coli membrane, which contains five lipid types: CL lipids with two types of acyl chains and phosphatidylethanolamine lipids with three types of acyl chains. It is our hope that CHARMM‐GUI Membrane Builder becomes a useful tool for simulation studies to better understand the structure and dynamics of proteins and lipids in realistic biological membrane environments. © 2014 Wiley Periodicals, Inc.     

Lipid/protein interactions and the membrane/water interfacial region

Despite the importance of lipid/protein interactions in the folding, assembly, stability, and function of membrane proteins, information at an atomic level on how such proteins interact with the lipids that surround them remains sparse. The dynamics and flexible nature of the protein/bilayer interaction make it difficult to study, for example, by crystallographic means. However, based on recent progress in molecular simulations of membranes it is possible to address this problem computationally. This communication reports one of the first attempts to use multiple ns molecular simulations to establish a qualitative picture of the intermolecular interactions between the lipids of a bilayer and two topologically different membrane proteins for which a high resolution (2 A or better) X-ray structure is available.     

Preparation and characterization of poly(lipid)-coated, fluorophore-doped silica nanoparticles for biolabeling and cellular imaging

The fabrication, characterization, and implementation of poly(lipid)-coated, highly luminescent silica nanoparticles as fluorescent probes for labeling of cultured cells are described. The core of the probe is a sol-gel-derived silica nanoparticle, 65-100 nm in diameter, in which up to several thousand dye molecules are encapsulated (Lian, W.; et al. Anal. Biochem. 2004, 334, 135-144). The core is coated with a membrane composed of bis-sorbylphosphatidylcholine, a synthetic polymerizable lipid that is chemically cross-linked to enhance the environmental and chemical stability of the membrane relative to a fluid lipid membrane. The poly(lipid) coating has two major functions: (i) to reduce nonspecific interactions, based on the inherently biocompatible properties of the phosphorylcholine headgroup, and (ii) to permit functionalization of the particle, by doping the coating with lipids bearing chemically reactive or bioactive headgroups. Both functions are demonstrated: (i) Nonspecific adsorption of dissolved proteins to bare silica nanoparticles and of bare nanoparticles to cultured cells is significantly reduced by application of the poly(lipid) coating. (ii) Functionalization of poly(lipid)-coated nanoparticles with a biotin-conjugated lipid creates a probe that can be used to target both dissolved protein receptors as well as receptors on the membranes of cultured cells. Measurements performed on single nanoparticles bound to planar supported lipid bilayers verify that the emission intensity of these probes is significantly greater than that of single protein molecules labeled with several fluorophores.     

Structures and rheological properties of hen egg yolk low density lipoprotein layers spread at the air-water interface at pH 3 and 7

Low density lipoproteins (LDL) from egg yolk have a classical structure of lipoprotein with a core of neutral lipids surrounded by a monolayer of apoproteins and phospholipids. This structure collapses during adsorption and all constituents spread at the interface. To understand better the nature of the interactions between apoproteins and lipids at the interface, we have deposited LDL at an air-water interface and analysed the isotherms during their compression on a Langmuir trough. Then, these LDL films were studied by atomic force microscopy (AFM) imaging. To identify the protein and lipid structures, we imaged films before and after lipid solubilisation by butanol. To study the interactions in the LDL films, we have varied the pH, ionic strength and used simplified model systems. We also studied the correlation between observed structures and interfacial rheology of the film. The isotherms of interfacial LDL films were similar for pH 3 and 7, but their structures observed in AFM were different. At surface pressures below the transition corresponding to the demixion of apoprotein-neutral lipid complexes, the LDL film structure was not governed by electrostatic interactions. However, above this surface pressure transition (45mN/m), there was an effect of charge on this structure. Around the transition zone, the rheological properties of LDL films at pH 3 were different as a function of pH (viscous at pH 3 and visco-elastic at pH 7). So, the rheological properties of LDL films could be linked to the structures formed by apoproteins and observed in AFM.     

Rhodopsin exhibits a preference for solvation by polyunsaturated docosohexaenoic acid

An all-atom molecular dynamics simulation of rhodopsin in a membrane environment has been carried out with lipid composition similar to that of the retinal membrane. The initial conformation of the protein was taken from the X-ray crystallographic structure (1F88), while those of the lipids came from a previous molecular dynamics simulation. During the course of the 12.5 ns simulation, the initially randomly placed lipids adopt an anisotropic solvation structure around the protein. The lipids, having one saturated stearic acid chain and one polyunsaturated docosohexaenoic acid chain with a zwitterionic phosphatidylcholine headgroup, arrange themselves to maximize contact between the polyunsaturated chain and the protein surface. This organization is driven by energetically favorable interactions between the transmembrance helices and the docosohexaenoyl chains that are largely of the van der Waals type. These observations are consistent with various experimental studies on rhodopsin and other G-protein coupled receptors and with the picture of extreme flexibility in polyunsaturated fatty acid chains that has arisen from recent NMR and computational work.     

A Mass-Spectrometry-Based Approach to Distinguish Annular and Specific Lipid Binding to Membrane Proteins

Membrane proteins engage in a variety of contacts with their surrounding lipids, but distinguishing between specifically bound lipids, and non-specific, annular interactions is a challenging problem. Applying native mass spectrometry to three membrane protein complexes with different lipid-binding properties, we explore the ability of detergents to compete with lipids bound in different environments. We show that lipids in annular positions on the presenilin homologue protease are subject to constant exchange with detergent. By contrast, detergent-resistant lipids bound at the dimer interface in the leucine transporter show decreased k_off rates in molecular dynamics simulations. Turning to the lipid flippase MurJ, we find that addition of the natural substrate lipid-II results in the formation of a 1:1 protein–lipid complex, where the lipid cannot be displaced by detergent from the highly protected active site. In summary, we distinguish annular from non-annular lipids based on their exchange rates in solution.     

Probing the interplay between amyloidogenic proteins and membranes using lipid monolayers and bilayers

Many degenerative diseases such as Alzheimer's and Parkinson's involve proteins that have a tendency to misfold and aggregate eventually forming amyloid fibers. This review describes the use of monolayers, bilayers, supported membranes, and vesicles as model systems that have helped elucidate the mechanisms and consequences of the interactions between amyloidogenic proteins and membranes. These are twofold: membranes favor the formation of amyloid structures and these induce damage in those membranes. We describe studies that show how interfaces, especially charged ones, favor amyloidogenic protein aggregation by several means. First, surfaces increase the effective protein concentration reducing a three-dimensional system to a two-dimensional one. Second, charged surfaces allow electrostatic interactions with the protein. Anionic lipids as well as rafts, rich in cholesterol and gangliosides, prove to play an especially important role. Finally, these amphipathic systems also offer a hydrophobic environment favoring conformational changes, oligomerization, and eventual formation of mature fibers. In addition, we examine several models for membrane permeabilization: protein pores, leakage induced by extraction of lipids, chaotic pores, and membrane tension, presenting illustrative examples of experimental evidence in support of these models. The picture that emerges from recent work is one where more than one mechanism is in play. Which mechanism prevails depends on the protein, its aggregation state, and the lipid environment in which the interactions occur.     

Cofilin-Membrane Interactions: Electrostatic Effects in Phosphoinositide Lipid Binding

The actin cytoskeleton interacts with the cell membrane primarily through the indirect interactions of actin-binding proteins such as cofilin-1. The molecular mechanisms underlying the specific interactions of cofilin-1 with membrane lipids are still unclear. Here, we performed coarse-grain molecular dynamics simulations of cofilin-1 with complex lipid bilayers to analyze the specificity of protein-lipid interactions. We observed the maximal interactions with phosphoinositide (PIP) lipids, especially PIP₂ and PIP₃ lipids. A good match was observed between the residues predicted to interact and previous experimental studies. The clustering of PIP lipids around the membrane bound protein leads to an overall lipid demixing and gives rise to persistent membrane curvature. Further, through a series of control simulations, we observe that both electrostatics and geometry are critical for specificity of lipid binding. Our current study is a step towards understanding the physico-chemical basis of cofilin-PIP lipid interactions.     

Use of an Octapeptide–Guanidiniocarbonylpyrrole Conjugate for the Formation of a Supramolecular β‐Helix that Self‐Assembles into pH‐Responsive Fibers

Peptides that adopt β‐helix structures are predominantly found in transmembrane protein domains or in the lipid bilayer of vesicles. Constructing a β‐helix structure in pure water has been considered difficult without the addition of membrane mimics. Herein, we report such an example; peptide 1 self‐assembles into a supramolecular β‐helix in pure water based on charge interactions between the individual peptides. Peptide 1 further showed intriguing transitions from small particles to helical fibers in a time‐dependent process. The fibers can be switched to vesicles by changing the pH value.     

Label‐Free Measurements of the Diffusivity of Molecules in Lipid Membranes

An important and characteristic property of a cell membrane is the lateral mobility of protein molecules in the lipid bilayer. This has conventionally been measured by labeling the molecules with fluorescent markers and monitoring their mobility by different fluorescence‐based techniques. However, adding the label to the studied molecule may affect the system, so it is an assumption in almost all experiments that the measured mobility of the biomolecule with its label is the same as that of the unlabeled molecule. However, this assumption is rarely tested due to a lack of suitable methods. In this work, a new technique to perform label‐free diffusivity measurements is developed and used to measure the effect of the label for two common protein–lipid systems: 1) streptavidin (SA) coupled to a supported lipid bilayer (SLB) through biotinylated lipids and 2) the extracellular part of the T‐cell adhesion protein CD2, coupled to an SLB through histidine tags to nickel‐chelating lipids. A measurable (≈12 %) decrease in diffusivity is found for both labeled proteins, even though the molecular mass of the label is almost 100 times smaller than those of the proteins (≈50 kDa). The results illustrate the importance of being able to study different biophysical properties of cell membranes and their mimics without relying on fluorescent labels, especially if fluorescent labeling is difficult or is expected to affect the nature of the intermolecular interactions being studied.     

Micelles,Bicelles, and Nanodiscs: Comparing the Impact of Membrane Mimetics on Membrane Protein Backbone Dynamics

Detergents are often used to investigate the structure and dynamics of membrane proteins. Whereas the structural integrity seems to be preserved in detergents for many membrane proteins, their functional activity is frequently compromised, but can be restored in a lipid environment. Herein we show with per‐residue resolution that while OmpX forms a stable β‐barrel in DPC detergent micelles, DHPC/DMPC bicelles, and DMPC nanodiscs, the pico‐ to nanosecond and micro‐ to millisecond motions differ substantially between the detergent and lipid environment. In particular for the β‐strands, there is pronounced dynamic variability in the lipid environment, which appears to be suppressed in micelles. This unexpected complex and membrane‐mimetic‐dependent dynamic behavior indicates that the frequent loss of membrane protein activity in detergents might be related to reduced internal dynamics and that membrane protein activity correlates with lipid flexibility.