Power transfer characteristics among N parallel single-mode optical fibers

Based on the coupled-mode theory, the power transfer among “- - -” arranged parallel single-mode optical fibers has been investigated. The analysis shows that the distances between each two of the N fibers centers have effects on the coupling coefficient and power transfer. The solution of the coupled equations for three parallel single-mode optical fibers is given, and is studied for different initial conditions comparatively. Numerical simulations show that power transfer will be periodical during coupling among parallel single-mode optical fibers. These results can be extended to multi-parallel single-mode optical fibers.     

Optical matching of single-mode fibers with different cross sections in a photopolymerizable composition

The possibility of optical matching in a photopolymerizable composition of a pair of single-mode fibers with significantly different core diameters is studied. It is shown that a polymer connector that is formed during self-channelling and interaction of optical beams at 0.63 μm in the photopolymerizable medium ensures an efficient connection of single-mode fibers at a wavelength of 1.55 μm. Results of experiments on the optical formation of matching polymer elements between SMF-28 and CS-980 and between SMF-28 and Ge-507sm single-mode fibers are presented.     

Power transfer characteristics among N parallel single-mode optical fibers

Based on the coupled-mode theory, the power transfer among “- - - -” arranged parallel single-mode optical fibers has been investigated. The analysis shows that the distances between each two of the N fiber centers have effects on the coupling coefficient and power transfer. The solution of the coupled-equations for three parallel single-mode optical fibers is given, and is studied for different initial conditions comparatively. Numerical simulations show that power transfer will be periodical during coupling among parallel single-mode optical fibers. These results can be extended to multi-parallel single-mode optical fibers.     

多根平行光纤的功率转移特性分析

基于模式耦合理论,研究了呈一字型排列的多根平行单模光纤间的功率转移,分析了光纤间距对耦合系数和功率转移的影响,给出了三根平行单模光纤耦合方程的解,针对不同的初始条件进行了比较分析.数值计算表明,呈一字型排列的多根平行单模光纤间的功率成一定周期转移.     

三包层WⅠ和WⅡ型单模光纤波导色散特性的研究

研究了三包层WⅠ和WⅡ型单模光纤的波导色散特性。结果发现在相同条件下，三包层WⅠ和WⅡ型单模光纤零色散点的调节范围比传统的双包层W型单模光纤明显增大。详细分析了几何参量P、Q和光学参量R1、R2对单模传输时的波导色散特性和低次模截止频率的影响。所得的研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。计算波导色散的方法可推广到多包层光纤。     

Generalized nonlinear coupled mode equations for ultrashort pulse propagation in optical fibers

A generalized model to describe the ultrashort pulse propagation in optical fibers with arbitrary modes present by taking advantage of the coupled mode approach is proposed. First the generalized nonlinear coupled mode equations in the frequency domain are derived exactly. Then the simplified forms for the weakly guiding optical fibers are obtained both in the frequency domain and in the time domain. Finally we discuss the particular forms in two special cases, i.e., ideal single-mode fibers and birefringent single-mode fibers.     

利用可见光测量近红外单模光纤的模场

光纤的模场分布是光纤最基本的特性,它包含了很多光纤的有关信息,单模光纤都工作在不可见的近红外波长范围内,且在可见光范围并非单模工作。提出了一种利用可见光测量近红外单模光纤模场直径的新方法,导出了一个考虑光纤材料色散的更精确地计算不同V值时模场直径的公式,设计了利用可见光直接拍摄模斑的系统,采用缠绕法提取基模,消除了高阶模对测量结果的影响,利用二元非线性曲面拟合,测得了光纤在近红外工作波长下的模场直径。由于无需红外光源、红外探测器以及精密的扫描装置,该方法具有成本低廉、测量速度快、调整容易等优点。     

Bending-induced optical loss in random-hole optical fibers

We present the experimentally determined optical bend loss for random hole optical fibers in the spectral range 1520 to 1570 nm induced by wrapping the optical fiber around a fixed diameter mandrel. The optical losses are compared to those obtained for a single-mode fiber and a multimode fiber using the same bending procedures. The bending induced optical losses in the random hole optical fibers were several orders of magnitude lower than for the single-mode fiber and were about 1 order of magnitude lower than for the multimode fiber.     

Ultrafast pulse sources based on multi-mode optical fibers

Ultrafast pulse sources based on multi-mode optical fibers are discussed. High-power passively mode-locked fiber lasers based on multi-mode rare-earth-doped optical fibers greatly exceed the power limitations of single-mode oscillators. Ultrafast multi-mode fiber amplifiers operating in conjunction with multi-mode oscillators provide even higher power levels, where nonlinear propagation effects enable pulse compression to below 100 fs. Multi-mode fiber oscillators can be combined with single-mode Raman-shifting fibers to produce widely wavelength-tunable sources of femtosecond pulses. Further amplification in Yb fibers allows for the generation of sub-100-fs pulses with W-level average powers.     

Quasi-Rayleigh light scattering by internal elements of a metamaterial in a light-carrying core of a single-mode optical fiber based on the Veselago effect

At present, single-mode optical fibers composed of metamaterials—so-called “left-handed” optical media—for the far- and mid-IR ranges have already been created. In the near future, left-handed singlemode optical fibers for the visible and near-IR ranges will be created, light-carrying cores of which will be composed by an ordered structure of dielectric elements, the dimensions of which will be much smaller than the light wavelength, while the effective refractive index of the structure will be negative; i.e., the structure will possess the so-called “Veselago effect.” We show that, because the dimensions of these dielectric elements many times exceed the dimensions of molecules of optical media, the elements should strongly scatter light, with this scattering considerably exceeding the Rayleigh (molecular) light scattering that occurs in conventional quartz single-mode optical fibers. We propose to term this phenomenon the quasi-Rayleigh light scattering. Numerical estimates of the quasi-Rayleigh light scattering for left-handed single-mode optical fibers at a light wavelength of λ = 1.55 μm have been made.     

基于光纤中脉冲压缩与受激喇曼散射的超短光脉冲产生方法

本文系统地综述了基于单模光纤中脉冲压缩与超快受激喇曼散射过程的超短光脉冲产生方法、原理及其进展,报道了我们最近的研究结果,讨论了在光纤中实现高效率超短光脉冲产生的途径.     

Double-clad fiber for endoscopy

Endoscopes employing a single optical fiber may have advantages over conventional fiber-bundle or CCD array imaging techniques, including the potential for greater flexibility and miniaturization. Although single-mode fibers can provide superior resolution compared with multimode fibers, they are prone to increased speckle noise and suffer from limited optical throughput and reduced depth of field. We demonstrate the use of a double-clad fiber for single-mode illumination and multimode detection to achieve high-resolution, reduced-speckle imaging with high optical throughput and a large depth of field.     

Raman-based distributed temperature sensor with 1 m spatial resolution over 26 km SMF using low-repetition-rate cyclic pulse coding

We experimentally investigate the benefits of a new optical pulse coding technique for long-range, meter and submeter scale Raman-based distributed temperature sensing on standard single-mode optical fibers. The proposed scheme combines a low-repetition-rate quasi-periodic pulse coding technique with the use of standard high-power fiber lasers operating at 1550 nm, allowing for what we believe is the first long-range distributed temperature measurement over single-mode fibers (SMFs). We have achieved 1 m spatial resolution over 26 km of SMF, attaining 3°C temperature resolution within 30 s measurement time.     

Analysis of waveguide dispersion characteristics of WI- and WII-type triple-clad single-mode fibers

Waveguide dispersion characteristics of two kinds of triple-clad single-mode fibers named WI and WII were examined in this paper. In view of the impossibility to deduce the expression of waveguide dispersion directly due to the complexity of the characteristic equations, a feasible approach to calculate waveguide dispersion was established. The calculated results indicate that the adjustable range of the zero-dispersion point of the triple-clad WI- and WII-type single-mode fibers is obviously wider than that of the conventional doubly clad W-type single-mode fibers in the same conditions. The influences made by the geometric parameters and optical parameters on the waveguide dispersion and cutoff characteristics of low-order modes for WI- and WII-type fibers were analyzed. The method presented to calculate waveguide dispersion can be applied to multi-clad fibers.     

Controllable photoinduced optical attenuation in a single-mode optical fiber by irradiation of a femtosecond pulse laser

Novel optical attenuation fibers were fabricated by the irradiation of a focused infrared femtosecond pulsed laser onto the core of a silica glass single-mode optical fiber. Optical attenuation at a wavelength of 1.55 microm proportionally increased with increasing numbers of irradiation points and was controllable under laser irradiation conditions. The single-mode property of the waveguide and the mode-field diameter of the optical fiber were maintained after irradiation of the femtosecond laser. It is suggested that the attenuation results from optical scattering at photoinduced spots formed inside the fiber core.     

Fabrication of microgratings on the ends of standard optical fibers by the electrostatic self-assembly monolayer process

The electrostatic self-assembly monolayer process has been utilized for what is believed to be the first time to deposit quarter-wavelength stacks on the end faces of cleaved and polished optical fibers. Standard multimode optical fibers as well as single-mode optical fibers were used as substrates with different coating materials to fabricate broadband filters, and the experimentally measured spectral responses of these devices are shown. These optical filter structures were employed to develop chemical sensors that use an unperturbed reference wavelength to normalize the output signal.     

Methods for calculating the temperature zero drift initiated in fiber ring interferometers by random inhomogeneities in single-mode optical fibers

The specific features of the existing methods used for calculating the temperature zero drift initiated in fiber ring interferometers (FRIs) by linear coupling between polarization eigenmodes at random inhomogeneities in single-mode optical fibers are analyzed. The ranges of applicability of each method are determined. It is demonstrated that numerical simulation with a variation in the temperature of the single-mode optical fiber of the FRI loop is the most complex and, at the same time, the most universal method.     

Stress-induced birefringence in microstructured optical fibers

We present a numerical study of stress-induced birefringence in microstructured optical fibers (MOFs), using a finite-element method. MOFs under lateral forces and twists are considered separately. Compared with that in standard single-mode optical fibers, stress-induced linear birefringence in MOFs under a lateral force is reduced with increasing air-hole size, whereas twist-induced circular birefringence in MOFs is enhanced when the air-hole size is small.     

石英系单模保偏光纤的受激拉曼散射传输模式的实验分析

对石英系单模保偏光纤中的受激拉曼散射传输模式进行了实验研究，测得三种不同截止频率的单模保偏光纤中受激布曼散射光谱及其模式的分布，其结果与圆芯多模渐折射率光纤中的受激拉曼散射模式分布完全不同，斯托克斯光谱的光斑尺寸基本不变，而且具以有高阶模传输的特点。这些结果在国内外尚未见报道。     

Determination of the Radial Distribution of Attenuation in Single-Mode Optical Fibers

A new method to determine the radial distribution of attenuation in single-mode optical fibers is proposed. As an example, radiation-induced losses in gamma-irradiated germanosilicate fibers are characterized at 633 nm.