聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.     

氟取代聚芳醚酮低温合成及其结构研究

通过傅克酰基化反应合成4,4'-二(4-氟苯甲酰基)二苯醚、4,4'-二(五氟苯甲酰基)二苯醚、4,4'-二(4-氟苯甲酰基)二苯硫醚以及4,4'-二(五氟苯甲酰基)二苯醚4种长链双卤单体,并进一步制备了含二氮杂萘酮聚芳醚酮聚合物.通过多氟取代双卤单体在含二氮杂萘酮聚芳醚酮聚合物主链中引入氟原子.多氟取代双卤单体具有多...     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996     

Novel poly(aryl ether phthalazinium) ionomers and their properties

The synthesis of N-phenyl phthalazinium salts by condensation of a 1,2-diaroylbenzene with phenylhydrazine is described. This reaction was utilized to prepare novel poly(aryl ether phthalazinium) ionomers by the direct condensation of poly(aryl ether ketone)s with phenylhydrazine. The preparation of poly(aryl ether phthalazinium) ionomers by methylation of poly(aryl ether phthalazine)s is also described. Most of the ionomers are amorphous, thermally stable, and soluble in organic solvents. They can be cast into flexible and strong films. The glass transition temperature of the ionomers ranges from 297 to 363°C, an increase of 12 to 100°C over the corresponding neutral polymers. © 1996 John Wiley & Sons, Inc.     

Polymers from 4-(4-hydroxyphenyl)phthalazin-1-one

2-(4′-Hydroxyphenylbenzoyl)benzoic acid is readily available from phenolphthalein by reaction with hydroxylamine. On treatment with hydrazine, 4-(4-hydroxyphenyl)phthalazin-1-one is formed in high yield. Under conditions conventionally used for the synthesis of poly(aryl ether)s the phthalazinone reacts with 4,4-difluorobenzophenone or 4,4′-difluorodiphenyl sulfone to yield high molecular weight linear polymers which are thermooxidatively stable and have Tg's approaching 300°C. The phthalazinone NH groups behave like phenolic OH groups and the resulting polymers contain O-C and N-C linkages. Phenyl-substituted phenolphthaleins have also been synthesized and converted to the corresponding phthalazinone polymers.     

Synthesis and Characterization of Poly(Aryl Ether-Bissulfone)s

A series of poly(aryl ether-bissulfone)s were synthesized from bis-phenols, 4,4′-bis(4-chlorophenylsulfonyl)biphenyl, and 4,4′-bis(4-fluorophenylsulfonyl)biphenyl. The bishalide monomers were synthesized by reaction of 4,4′-bis(chlorosulfonyl)biphenyl with a suitable aryl halide. Potassium carbonate mediated reaction in di-methylacetamide gave high molecular weight polymers in excellent yield. The polymers are soluble in dipolar aprotic solvents. Unlike the corresponding monosulfone analogues, the poly(aryl ether-bissulfone)s exhibited poor solubility in chlorinated hydrocarbons. The glass transition temperatures of the polymers are among the highest known for poly(aryl ether)s (241-271 °C). In addition, the polymers exhibit excellent thermal stability and they produce clear, colorless tough films by solution casting or compression molding.     

Synthesis of helical polyisocyanides bearing aza‐crown ether groups as pendant

We, herein, present a novel synthesis of responsive helical poly(aryl isocyanide)s bearing aza‐crown ethers as pendant groups. Chiral aryl isocyanide monomers bearing an aza‐crown ether as a pendant were designed and synthesized, piror to polymerization using a Pd‐Pt µ‐ethynediyl complex as an initiator to give the corresponding polymers in good yield. The resulting polyisocyanides adopted a stable helical structure in solution, as confirmed by circular dichroism spectroscopic analysis. In addition, the polymers were soluble in various solvents. Furthemore, the addition of suitable alkali metal ions to the crown ether of the sidechain on the helical polyisocyanide to form host‐gest complexes resulted in deformation of the helix due to electrostatic repulsion, and these phenomena depended on the size of metal cations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 496–504.     

含苯乙炔基的可交联聚芳醚酮交替共聚物的合成与热性能

以耐高温高性能树脂-聚芳醚酮作为研究对象, 从改善材料的加工工艺性及提高材料的使用温度出发, 对含有苯乙炔基的交替共聚物进行了系统研究. 实验结果表明, 该系列聚合物固化前具有较好的溶解性, 固化过程中显示出较好的热稳定性, 固化后具有较高的玻璃化转变温度和优异的热稳定性与热氧稳定性, 且降低聚合物的分子量没有对固化物的热性能产生明显影响, 在高性能复合材料基体树脂方面具有潜在的应用价值.     

Controlled sulfonation of poly(arylene ether sulfone)s and poly(arylene ether ketone)s with different molecular structures for polymer electrolyte membranes

Poly(arylene ether sulfone) copolymers derived from 9,9-bis(4-hydroxyphenyl)fluorene, bisphenol S and 4,4′-difluorodiphenylsulfone and poly(arylene ether ketone) copolymers derived from 4-phenoxybiphenyl, diphenyl ether and isophthaloyl chloride were prepared as precursor polymers for sulfonation reaction in which sulfonic groups are introduced quantitatively into specified positions. Sulfonation reaction for these two series of copolymers by concentrated sulfuric acid was successfully carried out to give sulfonated polymers with controlled positions and degree of sulfonation. Thermal stability, moisture absorption and proton conductivity for these two series of copolymers were measured and the results were compared to those of perfluorosulfonic acid polymers.     

Synthesis and Characterization of a Novel Poly(aryl ether) Containing 4-Chloro-2,5-diphenyloxazole

4-Chloro-2,5-bis(4-fluorophenyl)oxazole monomer has successfully been synthesized using cyclization reaction of 4-fluorobenzoyl cyanide with 4-fluorobenzaldehyde. This monomer was converted to poly(aryl ether)s by nucleophilic substitution of the fluorine atoms on the benzene rings of oxazole monomer with bisphenol A. The influence of the reaction time on the molecular weight had been investigated. The polymers were identified by FT-IR,¹H-NMR and TGA. The products exhibited weight-average molar masses up to 2.81 x 10⁴g mol⁻¹ in GPC. These poly(aryl ether)s showed very high thermal stability up to 363 °C for 5 % weight loss in TGA under N₂.     

Novel fluorinated poly(aryl ether ketone)s

Two novel fluorinated monomers were prepared and polymerized with biphenols to produce amorphous, thermally stable poly(aryl ether ketone)s. The properties of the fluorinated polymers are compared to those of unfluorinated, amorphous poly(aryl ether ketone)s. The presence of fluorine in the polymers was found to cause a decrease in glass transition temperature and Young's moduli, however, no increase in thermal stability was observed. The fluorinated polymers are soluble in common organic solvents such as chloroform and methylene chloride at room temperature, and also show solubility in solvents containing a ketonic moiety, such as acetone. Evidence of polymer branching through fluorines considered to be unreactive under the polymerization conditions was found. Efforts were made to evaluate the reactivity of fluorine atoms under the polymerization conditions using both molecular modeling and ¹⁹F-NMR to ascertain if such branching could be avoided. © 1995 John Wiley & Sons, Inc.     

含氰基高性能聚芳醚材料的合成与表征

将合成的含氰基的双二氮杂萘酮单体与二氟芳香单体进行亲核取代反应, 制备了三种含氰基的新型聚芳醚, 并用TGA, DSC和GPC等分析手段对其综合性能进行表征. 结果表明, 含氰基聚芳醚具有优异的热稳定性(T5%>492 ℃)、较高的玻璃化转变温度(Tg=262~320 ℃)和良好的溶解性能, 易溶于氯代烷烃(如氯仿)和极性非质子性溶剂(如DMAc, DMF, NMP等).     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Co‐poly(aryl ether sulfone)s containing phthalimidine moiety in the main chain

Several new co‐poly(arylene ether sulfone)s have been prepared by the reaction of 4,4′‐fluorodiphenyl sulfone (FDS) with different bisphenols namely 4,4′‐isopropylidenediphenol (BPA), 4,4′‐hexafluoroisopropylidenediphenol (6F‐BPA), and N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine(PA). The homo‐poly(arylene ether sulfone)s are named as 1a, 2a, and 3a. The copolymers namely 2b, 2c, 2d and 3b, 3c, 3d have been prepared, respectively, on reaction of FDS with BPA or 6F‐BPA using different molar ratios of PA such as 25, 50, and 75. The poly(aryl ether sulfone)s 1a containing PA unit in the main chain showed a very high glass transition temperature of 280°C and an outstanding thermal stability up to 510°C for 5% weight loss under synthetic air. Depending on the mole% of PA, the glass transition temperatures of the copolymers can be varied. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 84 MPa and Young's modulus up to 3.16 GPa. The films of these polymers showed low water absorption of 0.24%. Copyright © 2009 John Wiley & Sons, Ltd.     

含二氮杂荼酮结构新型聚芳醚系列高性能聚合物的合成与性能

从分子结构设计出发 ,以价廉易得的苯酚、苯酐为原料 ,经温和的工艺合成了结构全新的 4 ( 4′ 羟基苯基 ) 2 ,3 二氮杂萘 1 酮 (DHPZ) ,对其合成反应路线、合成反应动力学、反应机理进行了深入研究 .在大量实验研究基础上 ,结合分子立体结构的计算机模拟 ,确认其具有非共平面扭曲结构特征 ,其N—H键和O—H键具有类似的反应活性 ,是一种类似双酚的新单体 .以DHPZ与多种市售双卤单体如二氟二苯酮 (DFK)、二氯二苯砜 (DCS)、二氯二苯双酮 (DCKK)、二氯二苯腈 (DCBN)等经溶液亲核取代逐步聚合反应制得一系列含二氮杂萘酮结构的新型高性能聚醚砜 (PPES)、聚醚酮 (PPEK)、聚醚砜酮 (PPESK)、聚醚酮酮 (PPEKK)、聚醚砜酮酮(PPESKK)、聚醚腈酮 (PPENK)、聚醚腈砜 (PPENS)、聚醚腈砜酮 (PPENSK)等 ,对其结构进行了谱学表征 ,对其性能进行了全面测试 ,研究了其结构与性能关系 .谱学数据证明皆为无定型高聚物 .其玻璃化温度Tg 在 2 5 0～370℃之间 ,可以通过取代基团结构或主链上砜 酮基团比例进行调控 .在大量实验研究基础上 ,创造性提出“引入全芳环非共平面扭曲分子链结构赋予高聚物既耐高温又可溶解的优异综合性能”的分子结构设计理论 .在此分子设计理论指导下 ,设计并合成了含联苯二氮杂萘酮结构的新型二     

A review of Fourier-transform Raman spectroscopic studies on polymers

The published work on the FT-Raman spectra of polymers other than elastomers is reviewed and assessed. Experimental techniques, including sampling procedures, measurements at elevated temperatures and microscope accessories are considered first, followed by the scope for quantitative measurements. The survey of published work on polymers is arranged into the subdivisions hydrocarbon polymers, polyamides and polyimides, poly(aryl ether ketone) and poly(aryl ether ether ketone) and the corresponding sulphones, halogenated polymers, highly conjugated polymers, various other polymers, polymerization kinetic studies and thin polymer films.     

Resistive switching polymer materials based on poly(aryl ether)s containing triphenylamine and 1,2,4‐triazole moieties

A series of poly(aryl ether)s were successfully prepared via aromatic nucleophilic substitution reaction from various bisphenols and a novel bipolar aryl difluoride monomer containing electron‐donor triphenylamine and electron‐acceptor 1,2,4‐triazole moieties. The poly(aryl ether)s exhibited excellent solubility in organic solvents such as dimethylformamide, chloroform, and tetrahydrofuran at room temperature. The poly(aryl ether)s showed high thermal stability with T_d10 higher than 500 °C and glass transition temperatures (T_g) higher than 187 °C. The thin films of the poly(aryl ether)s indicated bistable resistive switching behavior with ON/OFF current ratios as high as 10³. The switching on and switching off bias voltages of the poly(aryl ether)s were affected by the bisphenol moiety. The good resistive switching behavior of the poly(aryl ether)s made them promising candidates for future nonvolatile memory applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6861–6871, 2008     

Preparation and properties of novel soluble poly(aryl ether)s bearing covalently bound tetrapyrazinoporphyrazine units

Thermooxidatively stable amorphous poly(dicyanopyrazine ether)s with high glass transition temperatures are synthesized and converted into poly(aryl ether)s bearing covalently bound zinc(II) 2,3,9,10,16,17,23,24-octaphenyltetrapyrazinoporphyrazine units. They are soluble in common organic solvents and can be cast into strong and flexible films. The maximum absorption wavelength of the poly(aryl ether)s bearing zinc (II) 2,3,9,10,16,17,23,24-octaphenyltetrapyrazinoporphyrazine units in chloroform is 654 nm. © 1995 John Wiley & Sons, Inc.     

Poly(aryl ether amide)s

A general method for the preparation of poly(aryl ether amide)s has been developed where the generation of an aryl ether linkage is the polymer-forming reaction. The amide linkage was found to be sufficiently electron-withdrawing to activate halo-substituents towards nucleophilic aromatic substitution analogous to conventional activating groups (i.e., sulfone, ketone, etc.). Model reactions demonstrated that the amide-activated displacement occurred with high selectivity in near quantitative yield and was judged suitable as a polymer-forming reaction. Appropriately fluoro-substituted amides were prepared and subjected to displacement polymerization with bisphenoxides in a N-methyl-2-pyrrolidone (NMP)/N-cyclohexyl-2-pyrrolidone (CHP) solvent mixture. High molecular weight polymers with glass transition temperatures in the 200–225°C range were obtained. © 1993 John Wiley & Sons, Inc.     

高Tg含萘聚芳醚酮的合成与性能

利用Friedel-Craft和去醚化反应成功地制备了具有对称取代结构的含萘双酚单体1,5-二(3-甲基)苯羰基-2,6-二羟基萘, 并且通过高温亲核取代反应制得了两种高分子量的芳香族聚合物, 对这两种新型聚合物的热性能、溶解性能、机械性能及介电常数等进行了表征.