One- and two-body densities of carbon isoelectronic series in their low-lying multiplet states from explicitly correlated wave functions

The (3)P ground state and both the (1)D and (1)S excited states arising from the low-lying 1s(2)2s(2)2p(2) configuration of the carbon isoelectronic series are studied starting from explicitly correlated multiconfigurational wave functions. One- and two-body densities in position space have been calculated and different one- and two-body expectation values have been obtained. The effects of electronic correlations have been systematically studied. All the calculations have been done by means of variational Monte Carlo.     

Photomagnetic properties in a series of spin crossover compounds

The spin crossover (SC) compounds [Fe(PM-AzA)2(NCX)2] and [Fe(PM-FIA)2(NCX)2] (with PM-AzA = N-2'-pyridylmethylene-4-(phe-nylazo)aniline, PM-FIA = N-2'-pyridylmethylene-4-(2-amino)fluorene, and X = S, Se) have been prepared. The SC regimes have been deduced from variable-temperature magnetic susceptibility data. The enthalpy and entropy changes associated with the SC have been evaluated from DSC measurements. A cooperativity factor, C, has been defined, and its values for the different compounds have been deduced from the spin crossover curves. At 10 K, the light-induced excited spin state trapping (LIESST) effect has been observed within the cavity of the SQUID magnetometer. The critical temperatures Tc(LIESST) have been determined for [Fe(PM-AzA)2(NCS)2] and [Fe(PM-F1A)2(NCX)2], and the role of cooperativity has been analyzed. A linear correlation has been found between the Tc(LIESST) and C values. The kinetics of HS-->LS relaxation have been investigated; a thermally activated mechanism at elevated temperatures and a nearly temperature independent relaxation behavior at low temperatures have been found. Finally, the magnetic behavior recorded under light irradiation in the warming and cooling modes has revealed the occurrence of the light-induced thermal hysteresis (LITH) effect.     

Conformational stabilities and structural parameters of (CH3)(n)CH(3-n) CFO molecules

Variable temperature (-60 to -100 degrees C) studies of the infrared spectra (3500-400 cm(-1)) of propionyl fluoride (CH3CH2CFO) and 2-methylpropionyl fluoride ((CH3)2CHCFO), dissolved in liquid xenon have been recorded. From these data, the enthalpy difference has been determined to be 329 +/- 33 cm(-1) (3.94 +/- 0.39 kJ/mol) for propionyl fluoride with the trans conformer (methyl group eclipsing the oxygen atom) more stable than the gauche form. For 2-methylpropionyl fluoride, the enthalpy difference has been determined to be 297 +/- 30 cm(-1) (3.55 +/- 0.36 kJ/mol) with the gauche conformer (methyl group eclipsing the oxygen atom) more stable than the trans form. From these DeltaH values along with assigned torsional fundamentals for both conformers and accompanying "hot bands" the potential functions governing the conformational interchange have been calculated. Utilizing the infrared data from the xenon solution and ab initio frequency predictions from MP2/6-31G* calculations, a few reassignments of the fundamentals have been made. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311 + G** from which structural parameters and conformational stabilities have been determined. Additionally, force constants, infrared intensities, Raman activities, depolarization ratios, and scaled vibrational frequencies have been determined from MP2/6-31G* calculations. Adjusted structural parameters have been obtained from combined ab initio predicted values and previously reported microwave data. These parameters are compared to those obtained from either the earlier microwave and/or electron diffraction studies. Similar ab initio calculations and structural parameter determinations have been carried out for acetyl fluoride (CH3CFO) and trimethylacetyl fluoride ((CH3)3CCFO) and compared to the corresponding experimental results when appropriate.     

Chlorinated hydrocarbons- (CHC) and PCDD/F-levels in sediments and breams (Abramis brama) from the river Elbe (contribution to the German Environmental Specimen Banking)

Chlorinated hydrocarbons have been determined in sediments and breams (Abramis brama) from different locations along the river Elbe, starting from the border to the Czech Republic down-stream up to Cumlosen (river km 470), near the frontier of the former German Democratic Republic. High levels of hexachlorobenzene (HCB) have been found in sediments. HCB, DDT-metabolites and octachlorostyrene (OCS) have been the most dominant compounds in bream, especially fish from eastern sampling sites have been heavily contaminated. Furthermore, sediments from 1991–1993 have been analysed to determine polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F). The CHC-burden of the river Elbe declines downstream, whereas the PCDD/F-content increases in that direction.     

An ESR on formation of iminoxy free radicals—solvent effect on hyperfine splitting constants

The solvent effect on hyperfine interaction in three different types of iminoxy radicals obtained by oxidation of di-2-pyridiketoxime (1), diethyl hydroxyimino(2-fluorophenyl)methanephosphonate (2) and isonitrosoacetophenone (3) have been analyzed. Linear correlations of hyperfine constants of ¹⁴N (both iminoxyl and pyridyl nitrogens of the iminoxyl derived from 1), ³¹P (isomer Z of the iminoxyl derived from 2) and ¹⁹F (both Z and E isomer of iminoxyls derived from 2 on E_T (30) solvent parameters have been found. Opposite directions of the dependencies for different nuclei of the same radical have been established. Anisotropic spectra of the radical derived from 1 and iminoxy radicals derived from -furildioxime have been obtained by γ-irradiation of solid oximes.     

Nine constituents including six xanthone-related compounds isolated from two ascomycetes, Gelasinospora santi-florii and Emericella quadrilineata, found in a screening study focused on immunomodulatory activity

Five metabolites tentatively called GS-1 (1)-5 (5) from Gelasinospora santi-florii, and four tentatively called EQ-4 (6), EQ-6 (7)-8 (9) together with 1-4 from Emericella quadrilineata have been isolated in a screening study on immunomodulatory fungal constituents. Among these nine metabolites, EQ-7 and 8 have been unknown. This time, the structures of GS-4 which has previously been isolated, EQ-7, and -8 have been determined to be (4R,4aS,9aR)-1,9a-dihydronidulalin A (4), (4S,4aR,9aR)-4a-carbomethoxy-1,4,4a,9a-tetrahydro-4,8-dihydroxy-6-methylxanthone (8), and 9-hydroxymicroperfuranone (9), respectively, and the six other metabolites have been identified. On bioassay, a dihydroxanthone, nidulalin A (1), a hexaketide, sordarial (5), and a xanthone, pinselin (7) have displayed significant immunosuppressive activities. The structure-activity relationships of these constituents have also been discussed.     

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-yl-methyl)-pentan-3-ol from hydrochloric acid solutions

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol from 3 M hydrochloric acid solutions (with chloroform as a diluent) has been studied. Optimal extraction conditions have been found. The reagent has been shown to extract efficiently metal ion from solutions containing 3 M hydrochloric acid due to formation of coordination bond between gold(III) and the N4 atom of the triazole ring. The coordination mechanism of gold(III) extraction has been proposed on the basis of the data obtained. Concentration constants of extraction have been calculated, and the thermodynamic parameters of extraction have been determined.     

Ring-closing metathesis of chiral allylamines. Enantioselective synthesis of (2S,3R,4S)-3,4-dihydroxyproline

The ring-closing metathesis (RCM) of two types of unsaturated chiral allylamines III, easily available from enantiomerically enriched epoxy alcohols, has been studied. Fully protected allylamines IIIa [(1)R = CH(2)-(CH(2))(n)()-CH=CH(2); (2)R = Boc; (3)R = PMB] have been prepared from unsaturated epoxy alcohols, whereas bis-allylamines IIIb ((1)R = Ph, (2)R = allyl,(3)R = Boc or PMB) have been prepared from 2,3-epoxy-3-phenylpropanol. Both types have been subjected to RCM to provide either cyclic allylamine I or II. The synthetic potential of these intermediates has been demonstrated by the enantioselective synthesis of (2S,3R,4S)-3,4-dihydroxyproline.     

New sterols and triterpenoids from four edible mushrooms

Four edible mushrooms, Panellus serotinus, Lepista nuda, Tricholoma matsutake and Naematoloma sublateritium, have been investigated chemically. Two new sterols, 5alpha,9alpha-epidioxy-(22E)-ergosta-7,22-diene-3beta,6alpha-diol (1) and 5alpha,9alpha-epidioxy-(22E)-ergosta-7,22-diene-3beta,6beta-diol (2), have been isolated from Panellus serotinus. Compound 2 was also isolated from Lepista nuda. A new sterol, 3beta,5alpha,9alpha,14beta-tetrahydroxy-(22E)-ergosta-7,22-dien-6-one (3), and compound 2 have been isolated from Tricholoma matsutake. Three new triterpenoids, sublateriols A-C (4-6), have been isolated from Naematoloma sublateritium. The structures of the new compounds were elucidated on the basis of their spectral data.     

Optimisation and comparison of microwave-assisted extraction and Soxhlet extraction for the determination of polychlorinated biphenyls in soil samples using an experimental design approach

Optimisation of microwave-assisted extraction (MAE) for the extraction of polychlorinated biphenyls (PCBs) from soil samples has been accomplished using an experimental design approach. Variables studied have been: percentage of acetone (v/v) in an acetone:n-hexane mixture, solvent volume, extraction time, microwave power and pressure inside the extraction vessel. Five samples of a certified soil (CRM 481) have been extracted under the optimum conditions of the developed method and the results have been compared to those obtained by Soxhlet extraction. Good recoveries (>95%) have been obtained for all the PCBs studied. All extracts have been analysed by gas chromatography/mass spectrometry (GC/MS) and an optimum determination method for the electron impact mass spectrometric (EIMS) has also been developed.     

Improved microbiological hydroxylation of sesquiterpenoids: semisynthesis,structural determination and biotransformation studies of cyclic sulfite eudesmane derivatives

Two new cyclic sulfite eudesmane derivatives have been investigated. Their (R) and (S) sulfur configuration and the structural arrangement of their "A" rings have been assigned by means of their 13C and 1H NMR chemical shifts and have been confirmed by single-crystal X-ray analyses. Microbial-transformation of these epimer cyclic sulfites and their dihydroxyeudesmane precursor have been studied using the hydroxylating fungus Rhizopus nigricans. Increased biocatalysis rates and considerable differences in the biotransformation of both cyclic sulfite eudesmanes have been found. Promising 8alpha,11-dihydroxy derivatives have been isolated from the (S)-diastereomer bioconversion.     

Berberis alkaloids. XXV. Structures of bernumidine and bernumicine

The alkaloid compositions of young shoots and leaves ofBerberis nummularia Bge. have been studied. The new alkaloids bernumidine (II) and bernumicine (III) have been isolated from the leaves, and their structures have been established.     

Absorption spectrometric study of charge transfer complex formation between 4-acetamidophenol (paracetamol) and a series of quinones including vitamin K3

The formation of charge transfer (CT) complexes of 4-acetamidophenol (commonly called 'paracetamol') and a series of quinones (including Vitamin K3) has been studied spectrophotometrically in ethanol medium. The vertical ionisation potential of paracetamol and the degrees of charge transfer of the complexes in their ground state has been estimated from the trends in the charge transfer bands. The oscillator and transition dipole strengths of the complexes have been determined from the CT absorption spectra at 298 K. The complexes have been found by Job's method of continuous variation to have the uncommon 2:1 (paracetamol:quinone) stoichiometry in each case. The enthalpies and entropies of formation of the complexes have been obtained by determining their formation constants at five different temperatures.     

New phytoactive polymers prepared by polycondensation

Some new poly(ether-ester)s (PEEs) and poly(ether-amide)s (PEAs) with polyether sequences linked by tartrate units have been synthesized. Derivatives bearing residues from the synthetic plant-growth regulator 1-naphthylacetic acid (NAA) as pendent groups and end-groups have been prepared by esterification of PEEs and PEAs with NAA. Polymers bearing residues from pyridine-2, 6-dicarboxylic acid (a herbicide) in the main chain have been prepared. The hydrolysis has been found to depend on the structure of the polymer carrier, on pH of the medium and on the ability of the polymers to form complexes with polyacids. The phytosanitary activity of the new polymers has been related to the particular features of their hydrolysis behaviour.     

方差-范围函数法求低密度聚乙烯/乙烯-丙烯-辛烯-1共聚物的共混体系次晶结构

将方差-范围函数法应用于共混体系中,求得了LDPE/EPO共混体系的(110)和(200)晶面的微晶大小和点阵畸变参数.微晶大小和点阵畸变参数值随EPO组份含量的增加基本呈下降趋势.     

Copper ferrocyanide — polyurethane foam as a composite ion exchanger for removal of radioactive cesium

A method has been developed for the removal of cesium from the aqueous radioactive waste using a composite ion-exchanger consisting of Copper-Ferrocyanide Powder (CFC) and Polyurethane (PU) Foam. Polyvinyl acetate has been used as a binder in the preparation of CFC-PU foam. The physical properties of CFC such as density, surface area, IR stretching frequency and lattice parameters have been evaluated and also its potassium and copper(II) content have been estimated. Optimization of loading of CFC on PU foam has been studied. The CFC-PU was viewed under microscope to find out the homogeneity of distribution. Exchange capacities of the CFC-PU foam in different media have been determined and column studies have been carried out. Studies have been undertaken on extraction of cesium from CFC foam and also on digestion of spent CFC-PU foam and immobilization of digested solution in cement matrix. The cement matrices have been characterized with respect to density, bio-resistance and leaching resistance.     

On mixed binary surfactant systems comprising MEGA 10 and alkyltrimethylammonium bromides: a detailed physicochemical study with a critical analysis

Self-aggregation of mixed binary nonionic and ionic surfactants comprising N-methyl-N-decanoyl glucamide (MEGA 10) and alkyltrimethylammonium bromides (C(12)-, C(14)-, and C(16)TAB) has been investigated in detail by different physical methods. The counter-ion binding, aggregation number, and polarity of the mixed micelles have been determined. The results have been analyzed in the light of the theories of Rubingh and Maeda. The thermodynamic parameters of the micellization process have been evaluated and discussed. The interfacial adsorptions of the mixed amphiphiles including their surface excesses and head-group areas have also been evaluated. Based on the head-group areas, the overall shapes of the mixed micelles have been predicted from the estimation of the amphiphile packing parameters.     

Synthesis and characterization of palladium(II) complexes with new diphosphonium-diphosphine and diphosphine ligands. Production of low molecular weight alternating polyketones via catalytic CO/ethene copolymerisation

The bis-cationic diphosphonium-diphosphine 6,7-di(di-2-methoxyphenyl)phosphinyl-2,2,4,4-tetra(di-2-methoxyphenyl)-2 lambda 4,4 lambda 4-diphosphoniumbicyclo[3.1.1]heptane-bis(PF6) ((o-MeO-PCP)(PF6)2) and the diphosphine rac-2,4-bis((di-2-methoxyphenyl)phosphino)pentane (rac-o-MeO-bdpp) have been synthesized. Both ligands have been employed to coordinate PdCl2 and Pd(OAc)2 to give [PdCl2(o-MeO-PCP)](PF6)2 (1a), PdCl2(rac-o-MeO-bdpp) (1b), [Pd(OAc)2(o-MeO-PCP)](PF6)2 (2a) and Pd(OAc)2(rac-o-MeO-bdpp) (2b). The ligands and complexes have been fully characterized in solution by multinuclear NMR spectroscopy. In addition, 1a and 1b have been authenticated by single crystal X-ray structure analyses. The Pd(II) complexes 1a and 1b have been employed as catalyst precursors for the CO/ethene copolymerisation in water-acetic acid mixtures, while 2a and 2b have been tested in methanol in the presence of p-toluenesulfonic acid. Irrespective of the reaction media, perfectly alternating polyketones were obtained in excellent yields and with number-average molecular weights ranging from 7.1-13.9 kg mol(-1) with the diphosphonium-diphosphine catalysts and from 37.2-48.2 kg mol(-1) with the diphosphine catalysts.     

Orientational order of difluorinated liquid crystals: a comparative 13C-NMR, Optical, and dielectric study in nematic and smectic B phases

Structural and orientational order properties of 3Cy2CyBF2 and of 5CyCy2BF2 have been investigated by means of (13)C-NMR, optical, and dielectric spectroscopy methods. In the case of NMR, order parameters have been independently obtained from the analysis of either (13)C-(19)F dipolar couplings or (13)C chemical shift anisotropies, both measured from (13)C-{(1)H} NMR static spectra. The assignment of the (13)C resonances has been carried out thanks to the comparison with solution state spectra and DFT calculations, and the relevant geometrical parameters and (13)C chemical shift tensors needed to derive orientational order parameters have been calculated by DFT methods. In the analysis of (13)C-(19)F dipolar couplings, empirical corrections for vibrations and anisotropic scalar couplings have been included. Dielectric measurements have been performed over a broad frequency range for two orientations of the nematic director with respect to the measuring field. At low frequencies (static case) a positive dielectric anisotropy has been determined, which has enabled the calculation of the order parameters according to a well-tested procedure. At high frequencies the dielectric anisotropy changes its sign, a property which can be useful in designing a dual addressing display. The nematic order parameter determined from optical, dielectric, and NMR methods have been compared: their trends with temperature are very similar, apart from some slight shifts, and were analyzed by Haller and Chirtoc models. The differences among the results obtained by the four methods have been discussed in detail, also with reference to the assumptions and approximations used in each case, and to the results recently reported for similar fluorinated nematogens. The presence of a non-negligible order biaxiality has been related to the presence of a CH2CH2 bridging group, linking one cyclohexylic unit with either the other cyclohexyl or the phenyl ring.