Scattering of SH-wave from interface cylindrical elastic inclusion with a semicircular disconnected curve

Scattering of SH wave from an interface cylindrical elastic inclusion with a semicircular disconnected curve is investigated.The solution of dynamic stress concentration factor is given using the Gteen's function and the method of complex variable functions.First,the space is divided into upper and lower parts along the interface.In the lower half space,a suitable Green's function for the problem is constructed.It is an essential solution of the displacement field for an elastic half space with a semi-cylindrical hill of cylindrical elastic inclusion while bearing out-plane harmonic line source load at the horizontal surface.Thus,the semicircular disconnected curve can be constructed when the two parts are bonded and continuous on the interface loading the undetermined anti-plane forces on the horizontal surfaces.Also,the expressions of displacement and stress fields are obtained in this situation.Finally,examples and results of dynamic stress concentration factor are given.Influences of the cylindrical inclusion and the difierence parameters of the two mediators are discussed.     

界面脱胶圆夹杂对SH波散射的远场解

采用Green函数方法和复变函数法研究了SH波对界面脱胶圆夹杂的散射问题,并给出 了远场解答. 首先,沿双质材料界面将整个空间分成上下两部分, 在下半空间,给出了在水 平表面上任意一点承受时间谐和的出平面线源载荷作用时的位移函数,取该位移函数作为 Green函数. 其次,在下半空间,利用相关文献给出的Green函数,在上下空间连接时在双质材料界面处满足 连续性条件,构造出半圆形脱胶裂纹,进而求出应力和位移的表达式,建立积分方 程组, 给出了散射波远场位移模式和散射截面的解答, 分析了在不同参数变化时SH 波散射的远场特性. 结果表明,脱胶结构的存在对位移和散射截面有较大的放大作用.     

SH波对双相介质界面附近圆形孔洞的散射

建立了求解平面SH波对双相介质界面附近圆形孔洞散射与动应力集中的一种分析方法．利用复变函数与多极坐标的方法构造了一个Green函数，它是在含有圆形孔洞的弹性半空间的水平面上任一点上作用时间谐和的出平面线源荷载的位移解．利用“契合”模型，并根据界面上位移连续性条件，建立了求解SH波对双相介质界面附近圆形孔洞散射的具有弱奇异性的第一类Fredholm型积分方程．给出了圆孔周边上动应力集中系数的表达式．作为算例，分析了在界面一侧或界面两侧附近具有圆形孔洞时SH波的散射，并讨论了入射波波数、不同的材料组合以及孔心至界面的距离对动应力集中的影响．     

Scattering of SH-waves by an interacting interface linear crack and a circular cavity near bimaterial interface

An analytical method is developed for scattering of SH-waves and dynamic stress concentration by an interacting interface crack and a circular cavity near bimaterial interface. A suitable Green‘s function is contructed, which is the fundamental solution of the displacement field for an elastic half space with a circular cavity impacted by an out-plane harmonic line source loading at the horizontal surface. First, the bimaterial media is divided into two parts along the horizontal interface, one is an elastic half space with a circular cavity and the other is a complete half space. Then the problem is solved according to the procedure of combination and by the Green‘s function method. The horizontal surfaces of the two half spaces are loaded with undetermined anti-plane forces in order to satisfy continuity conditions at the linking section, or with some forces to recover cracks by means of crack-division technique. A series of Fredholm integral equations of first kind for determining the unknown forces can be set up through continuity conditions as expressed in terms of the Green‘s function. Moreover, some expressions are given in this paper, such as dynamic stress intensity factor (DSIF) at the tip of the interface crack and dynamic stress concentration factor (DSCF) around the circular cavity edge. Numerical examples are provided to show the influences of the wave numbers, the geometrical location of the interface crack and the circular cavity, and parameter combinations of different media upon DSIF and DSCF.     

SH波作用下界面任意形状孔洞附近的动应力集中

采用Green函数和复变函数法求解了平面SH波在界面任意形状孔洞上的散射问题.首先,取含有任意形状凹陷的弹性半空间,在其水平表面上任意一点承受时间谐和的反平面线源荷载作用时的位移场作为Green函数.然后,按契合方式构造出界面任意形状孔洞对SH波的散射模型,利用所得Green函数按界面位移连续条件建立求解问题的定解积分方程组,求解界面孔附近的动应力集中系数.最后,给出了界面上椭圆孔和方孔边缘动应力集中系数的数值结果,并讨论了不同介质参数和孔洞形状对孔附近动应力集中系数的影响.     

SH波对浅埋弹性圆柱及裂纹的散射与地震动

采用Green函数、复变函数和多极坐标等方法研究含圆柱形弹性夹杂的弹性半空间中任意位置、任意方位有限长度裂纹对SH波的散射与地震动. 构造了含圆柱形弹性夹杂的半空间对SH波的散射波,并求解了适合本问题Green函数,即含有圆柱形弹性夹杂的半空间内(表面)任意一点承受时间谐和的出平面线源载荷作用时位移函数的基本解答. 利用裂纹``切割'方法在任意位置构造任意方位的裂纹,可以得到基体中圆柱形弹性夹杂和裂纹同时存在条件下的位移场与应力场. 通过数值算例,讨论各种参数对夹杂上方地表位移的影响.      

孔边裂纹对SH波的散射及其动应力强度因子

采用Ｇｒｅｅｎ函数法研究任意有限长度的孔边裂纹对ＳＨ波的散射和裂纹尖端场动应力强度因子的求解．取含有半圆形缺口的弹性半空间水平表面上任意一点承受时间谐和的出平面线源荷载作用时位移函数的基本解作为Ｇｒｅｅｎ函数,采用裂纹“切割”方法并根据连接条件建立起问题的定解积分方程,得到动应力强度因子的封闭解答．最后给出了孔边裂纹动应力强度因子的算例和结果,并讨论了圆孔的存在对动应力强度因子的影响     

Scattering far field solution of SH-wave by movable rigid cylindrical interface inclusion

The Green's function is used to solve the scattering far field solution of SH-wave by a movable rigid cylindrical interface inclusion in a linear elastic body. First, a suitable Green's function is developed, which is the fundamental displacement solution of an elastic half space with a movable rigid half-cylindrical inclusion impacted by out-of-plane harmonic line source loaded at any point of its horizontal surface. By using the Green's function, a series of Fredholm integral equations of the first kind which determine the scattering far field can be set up. Then the paper gives the expressions on the far field including the displacement mode of scattering wave and the solution of scattering cross-section. Finally, some examples and numerical results are discussed to analyze the influence of the combination of different media parameters on the answer of far field.     

直角平面内弹性圆夹杂对入射平面SH波的散射

利用复变函数法、多极坐标移动技术及傅立叶级数展开求解二维直角平面内圆形弹性夹杂对稳态入射平面SH波的散射问题。首先写出直角平面内不含夹杂时的入射波场和反射波场;其次建立直角平面内含夹杂时夹杂外的散射波解和夹杂内的驻波解,并利用叠加原理写出问题的总波场,借助夹杂边界处应力和位移的连续条件建立求解散射波解和驻波解中未知系数的无穷代数方程组并求解,通过算例具体讨论了直角平面水平边界点的位移幅度比和夹杂边界处径向应力集中系数随不同无量纲波数、入射角及圆孔位置的变化情况,结果表明了算法的有效实用性。     

Scattering of SH-wave by cracks originating at an elliptic hole and dynamic stress intensity factor

The method of complex function and the method of Green‘s function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamicstress intensity factor at the crack tip was given. A Green‘s function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.     

Properties of a half space including a twisted shaft of revolution

The properties of an elastic half space including a partly embedded twisting shaft of revolution are studied. Without knowing the exact solution of the torsion problem of a given embedded shaft, these properties can indicate some features of the displacement or stress field of the half space and can sometimes be used for checking a numerical solution. An example for checking the correct stress distribution on surfaces of twisted rigid cylindrical shaft embedded in a half space is given. This Work was Supported by the National Science Foundation of China.     

半空间内含有部分脱胶的椭圆夹杂及圆孔对SH波的散射

采用复变函数法,结合"保角映射"技术及Green函数法,研究SH波作用下半空间内含有部分脱胶的椭圆夹杂以及圆形孔洞的散射问题。首先,利用"保角映射"技术将椭圆夹杂映射为圆夹杂,求出散射波位移场,同时,利用Green函数法与"虚设点源"的方法,求出半空间内椭圆夹杂以及圆孔的位移及应力场;然后,根据椭圆夹杂周围位移、应力连续、圆孔周围应力自由的边界条件,建立无穷线性代数方程组,求解出波函数中的未知系数;最后,在脱胶部分施加大小相等、方向相反的应力,构造出"脱胶模型",得到半空间内含有部分脱胶的椭圆夹杂以及圆形孔洞的总位移场。数值算例表明,入射角度、入射波频率、缺陷之间的距离、夹杂埋深及脱胶角度等对动应力集中因子有较大影响。     

压电体中孔边Ⅲ型界面裂纹的动应力强度因子

采用Green函数法研究界面上含圆孔边界径向有限长度裂纹的两半无限压电材料对SH波的散射和裂纹尖端动应力强度因子问题.首先构造出具有半圆型凹陷半空间的位移Green函数和电场Green函数,然后采用裂纹"切割"方法构造孔边裂纹,并根据契合思想和界面上的连接条件建立起求解问题的定解积分方程.最后作为算例,给出了孔边界面裂纹尖端动应力强度因子的计算结果图并进行了讨论.     

SH波对内含裂纹衬砌结构的散射及动应力集中

当衬砌结构内含裂纹时 ,采用Green函数的方法 ,研究了SH波对裂纹的散射及其动应力集中 ,构造了在含有半圆形衬砌的弹性半空间上 ,在水平面上任一点承受时间谐和出平面线源载荷作用时的位移函数作为Green函数 ;推导了SH波对衬砌内有裂纹的散射定解积分方程组 ,进而求得裂纹尖端的动应力因子 ,重点讨论了衬砌及周围介质对裂纹尖端动应力因子的影响 ,给出了介质参数变化对裂纹尖端动应力因子的影响曲线 ,为工程设计提供了依据。     

直角平面区域内固定圆形刚性夹杂问题的Green函数解

利用复变函数法、多极坐标移动技术研究了直角平面区域内含有固定圆形夹杂时的反平面问题Green函数解.首先构造出不含夹杂的完整直角平面区域内满足边界应力条件的入射位移场;其次,建立直角平面区域内固定圆形夹杂对该入射场产生的满足直角边界应力自由条件的散射波解,并由叠加原理得到介质内的总波场.最后利用夹杂边界处的位移条件确定出散射波解中的未知系数,最终得到问题的Green函数解,还通过算例讨论了夹杂边界处的径向应力和环向应力随不同波数、角度和不同夹杂位置及不同点源位置的变化情况.算例结果表明了该文方法的有效实用性.     

SH波与界面多圆孔的散射及动应力集中

研究了平面SH波对相邻多个界面圆孔的散射及其动应力集中,为了求解,首先利用复变函数和多极坐标方法构造了在含有多个半圆形缺口的弹性半空间,水平面上任一点随时间谐和出平面线源载荷作用时失主移,邓Green函数,且采用“契合”模型,推导了SH波对相邻多个界面圆孔散射的定解积分方程组,进而求得圆孔附近的动应力系数,作为算例,讨论了具有两个界面圆孔对SH波的散射及其相互影响,给出了孔附近的动应力分布曲线。     

SH波入射半空间双相介质界面附近圆形衬砌的动力分析

利用复变函数和Green函数法研究了无限半空间中双相介质界面附近圆形衬砌对SH波的散射与动应力集中问题。该问题的解答采用镜像法,首先构造出含有圆形衬砌的直角平面区域出平面问题的Green函数,然后利用“契合”技术,并根据界面处位移连续性条件将解答归结为具有弱奇异性的第一类Fredholm积分方程组的求解,结合散射波的衰减特性,直接离散该方程组,把积分方程组转化为线性代数方程组可得到该问题的数值结果。最后,通过算例分析了不同介质参数、几何参数和入射波时圆形衬砌界面的动应力集中情况。     

SH波散射与界面圆孔附近的动应力集中

建立了求解含有界面圆孔的二种不同弹性组合介质中ＳＨ波的散射和界面圆孔附近的动应力集中问题的Ｇｒｅｅｎ函数法给出了一个具有半圆形缺口的弹性半空间水平表面上任意一点承受时间谐和的出平面线源荷载作用时位移函数的基本解取基本解作为Ｇｒｅｅｎ函数，建立起问题的定解积分方程最后给出了界面圆孔的动应力集中的算例和结果，并讨论了不同介质参数的组合对动应力集中的影响     

On the load transfer from a rigid cylindrical inclusion into an elastic half space

The present paper examines the problems related to the axial, lateral, and rotational loading of a rigid cylindrical inclusion which is embedded in bonded contact at the boundary of an isotropic elastic half space. The rigid inclusion is modeled as a field of distributed forces which represent the normal and shear tractions that act on the inclusion-elastic-medium interface. The intensities of these distributed tractions are determined by enforcing displacement compatibility conditions at discrete locations of the interface. These compatibility conditions are derived from rigid-body displacement modes appropriate for each loading. The results derived from this numerical scheme are compared with equivalent results derived via analytical techniques which focus on the solution of the governing integral-equation schemes and other approximate-solution schemes. The numerical results presented in the paper illustrate the manner in which the generalized stiffnesses of the embedded inclusion are influenced by its geometry and Poisson's ratio of the half-space region.     

Interaction of harmonic axisymmetric waves with a thin circular absolutely rigid separated inclusion

We study stress concentration near a circular rigid inclusion in an unbounded elastic body (matrix). In the matrix, there are wave motions symmetric with respect to the axis passing through the inclusion center and perpendicular to the inclusion. It is assumed that one of the inclusion sides is completely fixed to the matrix, while the other side is separated and the conditions of smooth contact are realized on that side. The solution method is based on the fact that the displacements caused by waves reflected from the inclusion are represented as a discontinuous solution of the Lamé equations. This permits reducing the original problem to a system of singular integral equations for functions related to the stress and displacement jumps on the inclusion. Its solution is constructed approximately by the collocation method with the use of special quadrature formulas for singular integrals. The approximate solution thus obtained permits numerically studying the stress state in the matrix near the inclusion. Technological defects or constructive elements in the form of thin rigid inclusions contained in machine parts and engineering structure members are stress concentration sources, which may result in structural failure. It is shown that the largest stress concentration is observed near separated inclusions. Static problems for elastic bodies with such inclusions have been studied rather comprehensively [1, 2]. The stress concentration near separated inclusions under dynamic actions on the bodies has been significantly less studied even in the case of harmonic vibrations. The results of these studies can be found in [3, 4], where bodies with a thin separated inclusion were considered, and in [5], where the problem about torsional vibrations of a body with a thin circular separated inclusion was studied. The aim of the present paper is to study stress concentration near such an inclusion in the case of interaction with harmonic waves under axial symmetry conditions.