Dramatic solvent effect on the volume of the Diels-Alder reaction between tetracyanoethylene and cyclopentadiene

The partial molar volumes (V) and the enthalpies of dissolution (Δ_dis H) for tetracyanoethylene, cyclopentadiene, and their Diels—Alder adduct were determined at 25°C. Eleven solvents of the π- and n-donor type were used. The use of alkylbenzenes as solvents for tetracyanoethylene induces pronounced changes in the enthalpy of dissolution (up to 26 kJ mol⁻¹) and in the partial molar volume (up to 11 cm³ mol⁻¹), whereas these parameters for the adduct change slightly. TheV and Δ_dis H values for cyclopentadiene virtually do not depend on the nature of the solvent. In the case of tetracyanoethylene and the adduct in n-donor solvents, considerable variations of theV and Δ_dis H values are observed; they are not linear functions of the change in the partial molar volume of the adduct. Therefore, the reaction volumes in acetonitrile (−40.69) and ethyl acetate (−45.56) differ sharply from those ino-xylene (−24.28) and mesitylene (−21.76 cm³ mol⁻¹). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1046–1050, June, 2000.     

Thermodynamic characteristics of the acid dissociation of dopamine hydrochloride in water-ethanol solutions

Enthalpies of the interaction of protonated dopamine with a hydroxide ion in water-ethanol mixtures in the concentration range of 0–0.8 EtOH mole fractions are measured calorimetrically. The neutralization process of dopamine hydrochloride is shown to occur endothermally in solvents with an ethanol concentration of ≥0.5 mole fractions. Standard thermodynamic characteristics (Δ_r H ^○, Δ_r G ^○, and Δ_r S ^○) of the first-step acid dissociation of dopamine hydrochloride in solutions are calculated with regard to the autoprotolysis enthalpy of binary solvents. It is found that dissociation enthalpies vary within 9.1–64.8 kJ/mol, depending on the water-ethanol solvent composition.     

Stationary points on the energy hypersurface of the reaction O3 + H•→ [•O3H]* ⇆ O2 + •OH and thermodynamic functions of •O3H at G3MP2B3, CCSD(T)-CBS (W1U) and MR-ACPF-CBS levels of theory

The relative enthalpies, ΔH^o (0) and ΔH^o (298.15), of stationary points (four minimum and three transition structures) on the ^•O₃H potential energy surface were calculated with the aid of the G3MP2B3 as well as the CCSD(T)–CBS (W1U) procedures from which we earlier found mean absolute deviations (MAD) of 3.9 kJ mol⁻¹ and 2.3 kJ mol⁻¹, respectively, between experimental and calculated standard enthalpies of the formation of a set of 32 free radicals. For CCSD(T)-CBS (W1U) the well depth from O₃ + H^• to trans-^•O₃H, ΔH^o_well(298.15) = −339.1 kJ mol⁻¹, as well as the reaction enthalpy of the overall reaction O₃ + H^•→O₂ + ^•OH, Δ_rH^o(298.15) = −333.7 kJ mol⁻¹, and the barrier of bond dissociation of trans-^•O₃H → O₂ + ^•OH, ΔH^o(298.15) = 22.3 kJ mol⁻¹, affirm the stable short-lived intermediate ^•O₃H. In addition, for radicals cis-^•O₃H and trans-^•O₃H, the thermodynamic functions heat capacity C^o_p(T), entropy S^o (T), and thermal energy content H^o(T) − H^o(0) are tabulated in the range of 100 − 3000 K. The much debated calculated standard enthalpy of the formation of the trans-^•O₃H resulted to be Δ_fH^o(298.15) = 31.1 kJ mol ⁻¹ and 32.9 kJ mol ⁻¹, at the G3MP2B3 and CCSD(T)-CBS (W1U) levels of theory, respectively. In addition, MR-ACPF-CBS calculations were applied to consider possible multiconfiguration effects and yield Δ_fH^o(298.15) = 21.2 kJ mol ⁻¹. The discrepancy between calculated values and the experimental value of −4.2 ± 21 kJ mol⁻¹ is still unresolved. Note added in proof: Yu-Ran Luo and J. Alistair Kerr, based on the discussion in reference 12, recently presented an experimental value of Δ_fH^o(298.15) = 29.7 ± 8.4 kJ mol⁻¹ in the 85th edition of the CRC Handbook of Chemistry and Physics (in progress).     

Thermal Decompositions of the Molybdotellurates of Nickel(II) and Cobalt(II)

Molybdotellurates [M(H₂O)₆]₃·[TeMo₆O₂₄], with M=Ni(II) and Co(II), were synthesized and characterized by single-crystal X-ray diffraction for compound 1 and X-ray powder diffraction for compound 2, EDAX, IR, electronic spectra in the solid phase and in solution, and magnetic properties. Thermogravimetry and differential scanning calorimetry of both compounds revealed a loss of 11 water molecules through an endothermal process with ΔH=800 kJ mol⁻¹ for the nickel compound and ΔH=833 kJ mol⁻¹ for the cobalt compound. The residual compounds were characterized by chemical analysis, IR and XPS spectroscopy This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymorphism of paracetamol

The thermodynamic relationship between crystal modifications of paracetamol was studied by alternative methods. Temperature dependence of saturated vapor pressure for polymorphic modifications of the drug paracetamol (acetaminophen) was mea sured and thermodynamic functions of the sublimation process calculated. Solution calorimetry was carried out for the two modifications in the same solvent. Thermodynamic parameters for sublimation for form I (monoclinic) were found: ΔG _sub²⁹⁸=60.0 kJ mol⁻¹; ΔH _sub²⁹⁸=117.9±0.7 kJ mol⁻¹; ΔS _sub²⁹⁸=190±2 J mol⁻¹ K⁻¹. For the orthorhombic modification (form II), the saturated vapor pressure could only be studied at 391 K. Phase transition enthalpy at 298 K, ΔH _tr²⁹⁸(I→II)=2.0±0.4 kJ mol⁻¹, was derived as the difference between the solution enthalpies of the noted polymorphs in the same solution (methanol). Based on ΔH _tr²⁹⁸ (I→II), differences between temperature dependencies of heat capacities of both modifications and the vapor pressure value of form II at 391 K, the temperature dependence of saturated vapor pressure and thermodynamic sublimation parameters for modification II were also estimated (ΔG _sub²⁹⁸=56.1 kJ mol⁻¹; ΔH _sub²⁹⁸=115.9±0.9 kJ mol⁻¹; ΔS _sub²⁹⁸=200±3 J mol⁻¹ K⁻¹). The results indicate that the modifications are monotropically related, which is in contrast to findings recently reported found by classical thermochemical methods.     

Kinetics and thermal stability of two peroxidase isozymes from Eupatorium odoratum

The Eupatorium odoratum leaf peroxidase exists as at least seven distinct isozymes (three cationic, three anionic, and one neutral). These isozymes were identified and separated by preparative iso-electric focusing. Thermal stability, including the activation enthalpy (ΔH ^*), free energy of inactivation (ΔG ^*) and activation entropy (ΔS ^*), and kinetic studies of two isozymes, one having a pI of 5.0 (E5) and another one having a pI of 7.0 (E7) with mol mass of 43 and 50 kD, respectively, were studied in detail. Of the molecular weight of E5 and E7, 25 and 32% correspond to the carbohydrate content of the isozymes. Optimal pH was in the acidic range of 3.6–3.8 for E5 and 3.8 for E7 with the oxidation of ABTS. E7 and E5 showed activation energy for inactivation, 194.8 and 145.4 kJ/mol, respectively. Both the isozymes showed distinct substrate specificity. The catalytic specificity constant for E5 and E7 were 112×10⁵ and 124×10⁵/s·M, respectively, when 2,2′-azino-bis-(3-ethylbenz-thiazoline-6 sulfonic acid) was used as the substrate. Maximum affinity (i.e., lowest K _m value) to H₂O₂ was shown by E5 and E7 along with Pyrogallol and was 0.02 and 0.05/s·M, respectively.     

The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

Multicomponent determination of cobalt, copper, and iron with 1,10-phenanthroline by principal component regression modelling of spectrophotometric data

The rotational energy barriers were determined for twelve of the nineteen environmentally stable atropisomeric polychlorinated biphenyls (PCBs), viz. PCB 84, 131, 132, 135, 136, 144, 149, 174, 175, 176, 183, and 196, by thermal racemization of enantiomerically pure PCBs. The rate of racemization was primarily determined using off-line gas chromatography (GC) or high-performance liquid chromatography (HPLC), with permethylated cyclodextrin (PMCD) as the chiral selector. GC was used for PCB 84, 132, 136, 149, 174, and 176, while PCB 131, 175, and 196 were analyzed using HPLC. The remaining PCBs, i.e. PCB 144 and 183, were separated by HPLC using a Chiralpak OP(+) polymethacrylate column. Gibbs free energy of activation (Δ^‡G) was 176.6 to 184.8 kJ/ mole for tri-ortho PCBs. For tetra-ortho PCBs the Δ^‡G was estimated to be ∼246 kJ/mole. A buttressing effect of 6.4 kJ/mole was observed for tri-ortho PCBs that have one buttressing chlorine. Received: 19 October 1998 / Revised: 26 November 1998 / Accepted: 28 December 1998     

Rubidium and lithium butanoates binary phase diagram

The temperature and enthalpy vs. composition diagrams of the binary system [xC₃H₇CO₂Li+(1–x)C₃H₇CO₂Rb], where x=mole fraction, were determined by differential scanning calorimetry (DSC). This binary systems displays the formation of two mixed salts with a composition 1:1 and 1:2, which melt incongruently at T _fus=590.5 K, with Δ_fus H _m=11.6 kJ mol^–1, and congruently at T _fus=614.5 K, with Δ_fus H _m=20.2 kJ mol^–1, respectively. The phase diagram also presents an ionic liquid-crystalline phase in a wide temperature range: 95 K.     

Thermophysical Investigations of the Polymorphous Phases of Calcium Carbonate

1. Results of thermodynamic and kinetic investigations for the different crystalline calcium carbonate phases and their phase transition data are reported and summarized (vaterite: V; aragonite: A; calcite: C). A→C: T _tr=455±10°C, Δ_tr H=403±8 J mol^–1 at T _tr, V→C: T _tr=320–460°C, depending on the way of preparation,Δ_tr H=–3.2±0.1 kJ mol^–1 at T _tr,Δ_tr H=–3.4±0.9 kJ mol^–1 at 40°C, S _V ^Θ= 93.6±0.5 J (K mol)^–1, A→C: E _A=370±10 kJ mol^–1; XRD only, V→C: E _A=250±10 kJ mol^–1; thermally activated, iso- and non-isothermal, XRD 2. Preliminary results on the preparation and investigation of inhibitor-free non-crystalline calcium carbonate (NCC) are presented. NCC→C: T _tr=276±10°C,Δ_tr H=–15.0±3 kJ mol^–1 at T _tr, T _tr – transition temperature, Δ_tr H – transition enthalpy, S ^Θ – standard entropy, E _A – activation energy. 3. Biologically formed internal shell of Sepia officinalis seems to be composed of ca 96% aragonite and 4% non-crystalline calcium carbonate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of protonation and deprotonation on surface charge density of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>

The protonation and deprotonation of the Nb₂O₅ surface has been followed in order to understand the reactions of surface of this catalyst. The simultaneous potentiometric and conductometric titrations had been carried by using 50 mL of water suspension of Nb₂O₅ 40 g L⁻¹. The oxide was entirely deprotonated when adding 0.4 mL NaOH 1 mol L⁻¹, and later titrated with 0.1 mol L⁻¹. The titration had supplied K ₁ and K ₂ and the obtained values were 3.24 × 10⁻³ and 4.17 × 10⁻⁸, respectively. The zero point charge was pH_pcz = 4.94. The thermodynamic studies were carried out by using 50 mL of a 40 g/L Nb₂O₅ aqueous suspension with the pH adjusted to pH_PZC value. The suspension was titrated with 0.5 mol/L of HNO₃ or NaOH for protonation or deprotonation studies, respectively, in an isoperibol calorimeter CSC ISC-4300. Thus, the obtained thermodynamic values of the protonation and deprotonation of Nb₂O₅ were Δ_dp G = −37.60 kJ/mol, Δ_dp H = −23.72 kJ/mol and Δ_dpS = 47 J/(mol K).     

Thermochemistry of Microhydration of Sodiated and Potassiated Monosaccharides

The thermochemical properties ΔH ^o _n , ΔS ^o _n , and ΔG ^o _n for the hydration of sodiated and potassiated monosaccharides (Ara = arabinose, Xyl = xylose, Rib = ribose, Glc = glucose, and Gal = galactose) have been experimentally studied in the gas phase at 10 mbar by equilibria measurements using an electrospray high-pressure mass spectrometer equipped with a pulsed ion beam reaction chamber. The hydration enthalpies for sodiated complexes were found to be between −46.4 and −57.7 kJ/mol for the first, and −42.7 and −52.3 kJ/mol for the second water molecule. For potassiated complexes, the water binding enthalpies were similar for all studied systems and varied between −48.5 and −52.7 kJ/mol. The thermochemical values for each system correspond to a mixture of the α and β anomeric forms of monosaccharide structures involved in their cationized complexes.     

Another Approach to the Modified Zhuravlev Equation on the Basis of the Oxidation of V2O4 and V6O13

It has been found that the modified Zhuravlev equation, [(1−α)^−1/3−1]²=ktⁿ, which describes the kinetics of oxidation of V₂O₄ and V₆O₁₃ in the temperature range 820–900 K and in the oxygen pressure range 1.0–20 kPa, can be derived via the assumption that the changes in the observed activation energy result from the changing contributions of the two diffusion processes controlling the reaction rate. The values of the observed activation energy are in the range 160–175 kJ mol⁻¹ for V₂O₄ and 188–201 kJ mol⁻¹ for V₆O₁₃ in the scope of the experimental oxygen pressures and temperatures and conversion degrees of 0.1–0.9. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermochemical studies on the thioproline

The combustion energy of thioproline was determined by the precision rotating-bomb calorimeter at 298.15 K to be Δ_c U= –2469.30±1.44 kJ mol^–1. From the results and other auxiliary quantities, the standard molar enthalpy of combustion and the standard molar enthalpy of formation of thioproline were calculated to be Δ_c H _m ^θC₄H₇NO₂S, (s), 298.15 K= –2469.92±1.44 kJ mol^–1 and Δ_f H _m ^θC₄H₇NO₂S, (s), 298.15K= –401.33±1.54 kJ mol^–1.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

The study of chemical reactions, absorption and extraction, using apparatuses with serpentine pie for pelliclizing-bubbling, XIV. Hydroperoxidation of 1,3-diisopropylbenzene with oxygen

Experimental results obtained by thermal hydroperoxidation of 1,3-diisopropylbenzene in the temperature region of 102–105°C, using a Vodnár-1 type apparatus with discontinuous operation are presented. Based on the results, the activation energy (E=48.5±2 kJ/mol), enthalpy (ΔH⁺=47±2 kJ/mol), entropy (ΔS⁺) and the activation free enthalpy (ΔG⁺) were calculated. XIII. J. Vodnár, A. Chis, A. Biro, S. Békássy and M. Dragan:Studia Univ. Babes-Bolyai, Chemia, Cluj-Napoca, 1997,42, 2.     

Ytterbium tris(hexafluoroacetylacetonate) Yb(C<Subscript>5</Subscript>O<Subscript>2</Subscript>HF<Subscript>6</Subscript>)<Subscript>3</Subscript>: The composition of overheated vapor and sublimation thermodynamics

A mass spectrometric study of the saturated vapor over ytterbium tris(hexafluoroacetylacetonate) Yb(hfa)₃ (hfa = CF₃-C(O)-CH-C(O)-CF₃) and of the vapor overheated up to the thermal decomposition temperature of the complex is presented. The vapor composition changes markedly with increasing temperature. At T ≈ 370 K, the mass spectrum of the vapor over Yb(hfa)₃ indicates the presence of ions containing one to three metal atoms. As the temperature is raised, the ion currents due to oligomer ions decrease. The oligomers are not detected at T > 440 K. The total decomposition temperature of Yb(hfa)₃ is 663(9) K. The second-law enthalpy of sublimation (ΔH _s^o (380 K)) is 134 ± 7 kJ/mol for the monomer and 138 ± 10 kJ/mol for the dimer. The enthalpy of dissociation of the dimer into monomer molecules is nearly equal to the enthalpy of sublimation of the monomer and dimer: ΔH _dis(380 K) = 130 ± 15 kJ/mol.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Oxygen stoichiometry,unit cell volume,and thermodynamic quantities of perovskite-type oxides

Perovskite-type oxides with A, A′=La, Ba, Sr; B, B′=Mn, Fe, Co were investigated by means of thermal analysis, solid electrolyte cells, and X-ray diffraction. Partial molar thermodynamic quantities are determined and their relations with O/M stoichiometry, unit cell volume, and phase stability were studied. The absolute values of partial molar enthalpies of perovskite-type oxides increase with increasing O/M stoichiometries and with decreasing unit cell volumes of the cubic perovskite-type structure, corresponding to higher chemical stabilities. The substitution of Ba for La, Ba for Sr, Co for Fe, and Fe for Mn lead to increase in unit cell volumes and decrease in absolute values of ΔH ⁰. The ΔH ⁰ values of the cobaltites/ferrites range from −33.5 kJ/mol for SrCo_0.8Fe_0.2O_3−x to −72.5 kJ/mol for La_0.2Sr_0.8Co_0.6Fe_0.4O_3−x, and of the manganates up to −132 kJ/mol for Ca_0.5Sr_0.5Mn_0.8Fe_0.2O_3−x .