N‐Boc‐Indolylbenzothiadiazole Derivatives: Efficient Full‐Color Solid‐State Fluorescence and Self‐Recovering Mechanochromic Luminescence

Herein, the solid‐state emission with good fluorescence quantum yields of N‐Boc‐indolylbenzothiadiazoles as a new class of fluorophores is described. Their solid‐state emission covers the wide range of the visible spectrum and the emission color can be tuned easily by changing the substituents on the two heteroaromatic rings. Among these, 3‐methylindolyl derivatives exhibit moreover autonomously self‐recovering mechanochromic luminescence, whereby the original solid‐state emission could be recovered spontaneously at room temperature after exposure to a mechanical stimulus. The emission color, as well as the recovery time for the color change could be tuned via the introduction of different substituents on the benzothiadiazole ring. We propose that the mechanism of the autonomously self‐recovering mechanochromic luminescence of 3‐methylindolylbenzothiadiazoles is based on a partial amorphization of the crystals upon exposure to the mechanical stimulus, followed by autonomous recovering in the form of recrystallization.     

Aggregation‐Induced Emission‐Active 1,4‐Dihydropyridine‐Based Dual‐Phase Fluorescent Sensor with Multiple Functions

A N‐2‐phenylethyl‐substituted 1,4‐dihydropyridine derivative (NDHP) containing 5,5‐dimethylcyclohexane‐1,3‐dione and naphthylethylene was designed and synthesized. NDHP acts as a multifunctional fluorescent sensor in dual phases. The crystal structure analysis confirms that the NDHP molecules have highly twisted conformations. The twisted conformation results in aggregation‐induced emission properties and solid‐state emission, by restricting the intramolecular free rotation in the aggregated or solid state. In the solid state, NDHP exhibits reversible mechanochromic properties as a result of the transition between the amorphous and crystalline states. NDHP also exhibits a rare phenomenon of acid‐fumed solid‐state emission enhancement owing to the change in packing mode from a zigzag arrangement to J‐aggregation. The solid‐state stimuli‐responsive fluorescence switching is applied to realize a rewritable optical recording media and a multiple output combinational logic system. In solution, NDHP shows a selective fluorescence response for environmentally harmful Hg²⁺, with a limit of detection of 2.7 nm . This results from the “turn‐on” responsive behavior owing to the Hg²⁺‐triggered aggregation of the NDHP molecules. NDHP is also used in the imaging of intracellular Hg²⁺ in HeLa cells. These findings provide a feasible and attractive route for developing multifunctional fluorescent sensors for use in dual phases.     

Dimethylamine substituted bisbenzocoumarin amides with solvatochromic and mechanochromic properties

Stimuli responsive luminescent materials have attracted increasing attention for their potential application in many fields. In this work, dimethylamine substituted bisbenzocoumarins amides (DBCE and DBCP) are synthesized and their optical properties are investigated. These molecules show solvatochromic properties. The orange fluorescence emission of DBCE in crystalline state is blue-shifted to yellow emission upon grinding. The orange color could be recovered by recrystallization process. Powder wide-angle X-ray diffraction and DSC experiments reveal that the transformation from crystalline states to amorphous states under external stimuli is responsible for the mechanochromic properties. This work developed a new kind of binaphthane-type luminescent materials with blue-shifted mechanochromic properties.     

Manipulation of Molecular Aggregation States to Realize Polymorphism,AIE, MCL,and TADF in a Single Molecule

Multifunctional emitting materials are scarce and need to be further explored. Now, a newly anthraquinone derivative, 2‐(phenothiazine‐10‐yl)‐anthraquinone (PTZ‐AQ) was designed and synthesized and found to demonstrate polymorphism, multi‐color emission, aggregation‐induced emission (AIE), mechanochromic luminescence (MCL), and thermally activated delayed fluorescence (TADF) in its different solid forms. It is shown for the first time that TADF properties of a compound can be systematically tuned via its aggregation state. The optimized PTZ‐AQ crystal shows a small singlet–triplet energy splitting of 0.01 eV and exhibits red TADF with a photoluminescence quantum yield as high as 0.848. This study shows that the unique multiple functions can be integrated into one single compound through controlling the aggregation states, which provides a new strategy for the investigation and application of multifunctional organic materials.     

Manipulation of Molecular Aggregation States to Realize Polymorphism,AIE, MCL,and TADF in a Single Molecule

Multifunctional emitting materials are scarce and need to be further explored. Now, a newly anthraquinone derivative, 2‐(phenothiazine‐10‐yl)‐anthraquinone (PTZ‐AQ) was designed and synthesized and found to demonstrate polymorphism, multi‐color emission, aggregation‐induced emission (AIE), mechanochromic luminescence (MCL), and thermally activated delayed fluorescence (TADF) in its different solid forms. It is shown for the first time that TADF properties of a compound can be systematically tuned via its aggregation state. The optimized PTZ‐AQ crystal shows a small singlet–triplet energy splitting of 0.01 eV and exhibits red TADF with a photoluminescence quantum yield as high as 0.848. This study shows that the unique multiple functions can be integrated into one single compound through controlling the aggregation states, which provides a new strategy for the investigation and application of multifunctional organic materials.     

Mechano- and Photoresponsive Behavior of a Bis(cyanostyryl)benzene Fluorophore

The mechanoresponsive behavior and photochemical response of a new bis(cyanostyryl)benzene fluorophore (CSB-5) were investigated. Green fluorescence with λ_em,max of 507 nm was found for CSB-5 in chloroform solution, mirroring the behavior of a previously reported similar dye (CSB-6). Alternatively, crystalline samples of CSB-5 exhibited orange fluorescence with λ_em,max of 620 nm, attributable to excimer emission. Although the emission color change was not clearly noticeable by naked eye, CSB-5 exhibited mechanochromic luminescence, due to transformation into the amorphous state upon grinding the crystalline powder. Interestingly, rubbed films of CSB-5 prepared on glass substrates exhibited a pronounced emission color change from orange to green when exposed to UV light. This response is the result of a photochemical reaction that occurs in the amorphous state and which causes a decrease of the excimer emission sites so that the emission color changes from excimer to monomer. The crystalline material did not display such a photoinduced emission color change and the difference in photochemical reactivity between crystalline and amorphous states was exploited to pattern the emission color of rubbed films.     

Multiple Anti‐Counterfeiting Guarantees from a Simple Tetraphenylethylene Derivative – High‐Contrasted and Multi‐State Mechanochromism and Photochromism

Herein the novel tetraphenylethylene (TPE) derivative 1 was designed with an integration of aggregation‐induced emission (AIE), multi‐state mechanochromism and self‐recovery photochromism. The molecule was susceptible to grinding, heating and vapor fuming and showed corresponding transition of its emission colors. The heated powder or single crystal of 1 exhibited reversible photochromism. After a short period of UV irradiation, it showed a bright red color, but recovered to its original white appearance within 1 min. The photochromism is due to the formation of photocyclization intermediates upon UV irradiation, while the eversible mechanochromism is attributed to the weak molecular interactions derived from head‐to‐tail stacking of the molecules. This reversible multi‐state, high‐contrasted and rapid responsive mechanochromic and photochromic property cooperatively provide double enhancement of a multimode guarantee in advanced anti‐counterfeiting.     

Insights into the AIEE of 1,8‐Naphthalimides (NPIs): Inverse Effects of Intermolecular Interactions in Solution and Aggregates

Systematic structural perturbation has been used to fine‐tune and understand the luminescence properties of three new 1,8‐naphthalimides (NPIs) in solution and aggregates. The NPIs show blue emission in the solution state and their fluorescence quantum yields are dependent upon their molecular rigidity. In concentrated solutions of the NPIs, intermolecular interactions were found to quench the fluorescence due to the formation of excimers. In contrast, upon aggregation (in THF / H₂O mixtures), the NPIs show aggregation‐induced emission enhancement (AIEE). The NPIs also show moderately high solid‐state emission quantum yields (ca. 10–12.7 %). The AIEE behaviour of the NPIs depends on their molecular rigidity and the nature of their intermolecular interactions. The NPIs 1 – 3 show different extents of intermolecular (π–π and C?H???O) interactions in their solid‐state crystal structures depending on their substituents. Detailed photophysical, computational and structural investigations suggest that an optimal balance of structural flexibility and intermolecular communication is necessary for achieving AIEE characteristics in these NPIs.     

A Novel Strategy to Design and Construct AIE-active Mechanofluorochromic Materials via Regulation of Molecular Structure

In this work, we first designed and synthesized tetraphenylene-fused aryl-imidazole derivatives TM-1 – 4 via regulation of molecular structure, which were consisted of 1H-imidazo[4,5-f][1,10]phenanthroline, 1H-phenanthro[9,10-d]imidazole, 4,5-diphenyl-1H-imidazole, 3,3′-(1H-imidazole-4,5-diyl)dipyridine moieties and AIE-active tetraphenylethene units, respectively. The results illustrated that TM-1 – 4 exhibited clear AIE characteristics. Meanwhile, TM-2 and TM-3 show excellent solid emission properties (Φ _TM-2 =13.73 % and Φ _TM-3 =36.21 %), whereas TM-1 and TM-4 exhibit the opposite properties (Φ _TM-1 =1.48 % and Φ _TM-4 =4.83 %). The multiple rotors (pyridine and benzene ring) causes twisted conformations of the molecule that prevents π-π stacking and enhances solid emission(Φ TM-2 <Φ TM-3 , Φ TM-1 <Φ TM-4 ). Significantly, TM-2 and TM-3 also exhibited reversible mechanochromic behavior (Emission red shifts: Δλ _TM-2 =43 nm and Δλ _TM-3 =41 nm) with color changes between blue and green emissions. The powder X-ray diffraction (PXRD) suggested the disordered state of ground sample could be readily returned to an ordered crystalline. Therefore, the mechanochromisms of TM-2 and TM-3 are ascribable to the phase transformation between crystal and amorphous structure. The single crystal X-ray analysis of TM-2 reveals a twisted conformation for TPE moiety and the absence of π-π intermolecular stacking. These excellent optical properties of TM-2 and TM-3 make them potentially applications in mechanochromic materials and imaging agents.     

Thermally Triggered Solid‐State Single‐Crystal‐to‐Single‐Crystal Structural Transformation Accompanies Property Changes

The 1D complex [(CuL_0.5H₂O) ? H₂O]_n ( 1 ) (H₄L=2,2′‐bipyridine‐3,3′,6,6′‐tetracarboxylic acid) undergoes an irreversible thermally triggered single‐crystal‐to‐single‐crystal (SCSC) transformation to produce the 3D anhydrous complex [CuL_0.5]_n ( 2 ). This SCSC structural transformation was confirmed by single‐crystal X‐ray diffraction analysis, thermogravimetric (TG) analysis, powder X‐ray diffraction (PXRD) patterns, variable‐temperature powder X‐ray diffraction (VT–PXRD) patterns, and IR spectroscopy. Structural analyses reveal that in complex 2 , though the initial 1D chain is still retained as in complex 1 , accompanied with the Cu‐bound H₂O removed and new O(carboxyl)?Cu bond forming, the coordination geometries around the Cu^II ions vary from a distorted trigonal bipyramid to a distorted square pyramid. With the drastic structural transition, significant property changes are observed. Magnetic analyses show prominent changes from antiferromagnetism to weak ferromagnetism due to the new formed Cu1‐O‐C‐O‐Cu4 bridge. The catalytic results demonstrate that, even though both solid‐state materials present high catalytic activity for the synthesis of 2‐imidazolines derivatives and can be reused, the activation temperature of complex 1 is higher than that of complex 2 . In addition, a possible pathway for the SCSC structural transformations is proposed.     

Single-Benzene-Based Solvatochromic Chromophores: Color-Tunable and Bright Fluorescence in the Solid and Solution States

The search for structurally simple chromophores with superior fluorescence brightness and a wide range of solvent compatibility is highly desirable. Herein, a new type of single-benzene-based solvatochromic chromophore with a symmetric bifunctional structure, in which azetidine and ethoxycarbonyl moieties serve as the electron-donating and -withdrawing groups, respectively, is reported. This chromophore exhibits an extraordinary wide range of solvent compatibility and preserves excellent fluorescence quantum yields from nonpolar n-hexane to polar methanol and even in water. Unusually, the symmetric structure of the chromophore shows a distinct color change from bright green to red with increasing solvent polarity and possesses large Stokes shifts (λ=132–207 nm) in the tested solvents. Moreover, this single-benzene-based chromophore displays good photochemical stability in both solution and solid states, and even exhibits reversible mechanochromic luminescence.     

Piezochromic luminescence and aggregation induced emission of 9,10- bis[2-(2-alkoxynaphthalen-1-yl)vinyl]anthracene derivatives

Four derivatives of 9,10-bis[2-(2-alkoxynaphthalen-1-yl)vinyl]anthracene (BNAs) were designed, successfully synthesized and characterized by spectrofluorometer, powder wide-angle X-ray diffraction (PXRD) and differential scanning calorimetry experiments (DSC), etc. It was found that these compounds exhibited aggregation-induced emission phenomenon. Moreover, these target compounds displayed reversible color change from yellow to orange upon pressing and annealing process. Interestingly, all of BNAs obviously presented red-shifted piezofluorochromic (PFC) properties and behaved mainly length dependence of alkoxy group, in which, BNA displayed the largest PFC spectral shift (Δl_PFC=26 nm). The PXRD profiles demonstrated the transformation from crystalline to amorphous state upon grinding, and the mechanism of PFC behaviors was proposed. Thus, changing the length of alkoxyl chain could be an alternative way to tune their PFC behaviors.     

A Mechanochromic Luminescent Dye Exhibiting On/Off Switching by Crystalline–Amorphous Transitions

A mechanochromic luminescent dye based on a simple aminomaleimide skeleton was readily synthesized in a one‐pot process. It exhibited an on/off mechanochromic luminescent switching property dependent on external stimuli, unlike a traditional mechanochromic color change. The green emission was turned on by grinding in a mortar and turned off by heating or treatment with dichloromethane. In the crystalline state, two molecules were stacked by cofacial π–π interactions, which caused concentration self‐quenching. The crystalline‐to‐amorphous transition induced by grinding removed cofacial π–π stacking, which led to intensive emission. Crystallizing processes recovered the cofacial π–π stacking, resulting in elimination of the emission. Theoretical calculations and X‐ray diffraction analyses revealed that the dye molecule was distorted in the crystalline state; thus even a mechanical stimulus caused the crystalline‐to‐amorphous transition.     

Controlling the Emergence and Shift Direction of Mechanochromic Luminescence Color of a Pyridine‐Terminated Compound

In this study, mechanochromic luminescence was induced in a complex of mechano‐inactive compounds. Dye/acid complexes containing the same π‐conjugated backbones were prepared. While the luminophore showed blue and red shifts in photoluminescence spectra when combined with different acids by grinding, it exhibited slight mechanoresponsiveness itself. Also, compounds with similar molecular backbones to the dye/acid complex were synthesized to clarify the color change mechanism. The compounds showed both blue and red shifts in photoluminescence and diffuse reflectance spectra upon grinding, indicating that mechanochromic luminescence in the hydrogen‐bonded complex is like its monomeric analogue and that aggregation structure plays an important role in mechanoresponsive behavior rather than the π‐conjugated structure. It was shown that a color change can be mechanically induced by imitating the solid‐state aggregation structure of other mechanoresponsive compounds without synthetic modification.     

Aggregation‐Induced Emission Properties of Copper Iodide Clusters

The aggregation‐induced emission (AIE) properties of two different copper iodide clusters have been studied. These two [Cu₄I₄L₄] clusters differ by their coordinated phosphine ligand and the luminescent mechanochromic properties are only displayed by one of them. The two clusters are AIE‐active luminophors that exhibit an intense emission in the visible region upon aggregation. The formed particles present luminescent thermochromism comparable to that of the bulk compounds. The observed AIE properties can be attributed to suppression of nonradiative relaxation of the excited states in a more rigid state, in relation to the large structural relaxation of the excited triplet state. The differences observed in the AIE properties of the two clusters can be related to the different ligands. A correlation between the luminescence mechanochromic properties and the AIE effect is not straightforward, but the formation of “soft” molecular solids is a common characteristic that can explain the photoactive properties of these compounds.     

Multicolored‐Fluorescence Switching of ICT‐Type Organic Solids with Clear Color Difference: Mechanically Controlled Excited State

A donor–acceptor‐type fluorophore containing a twisted diphenylacrylonitrile and triphenylamine has been developed by using the Suzuki reaction. The system indicates typical intramolecular charge‐transfer properties. Upon mechanical grinding or hydrostatic pressure, the fluorophore reveals a multicolored fluorescence switching. Interestingly, a fluorescence color transition from green to red was clearly observed, and the change of photoluminescent (PL) wavelength gets close to 111 nm. The mechanisms of high‐contrast mechanochromic behavior are fully investigated by techniques including powder XRD, PL lifetime, high‐pressure PL lifetime, and Raman spectra analysis. The tremendous PL wavelength shift is attributed to gradual transition of excited states from the local excited state to the charge‐transfer state.     

Selective Expression of a Carbazole-Phenothiazine Derivative Leads to Dual-mode AIEE,TADF and Distinctive Mechanochromism

In this article, we report a newly designed D−A−D’ derivative (CNCzPTZ), which displays selective expression of chromophores. This enables CNCzPTZ with solvatochromism, rare dual-mode AIEE properties, solid-state dual-emissions with phosphorescence and distinctive mechanochromism.CNCzPTZ exhibits dual-mode AIEE properties, since the emission band abruptly shifts from 550 nm to 500 nm as the water fraction increases. In the crystalline state, CNCzPTZ demonstrated dual emission bands of 478 nm and 538 nm.CNCzPTZ shows distinctive mechanochromic property in the solid state due to the planarization.     

Reversible and irreversible vapor-induced guest molecule exchange in spin-crossover compounds

Spin-crossover (SCO) complex [Fe(tpa)(NCS)(2)] (tpa = tri(2-pyridylmethyl)amine) crystallized in two solvate forms, yellow [Fe(tpa)(NCS)(2)]·X [Fe:X = 1:1; X = n-PrOH (complex is named as n-PrOH), i-PrOH (i-PrOH), CH(2)Cl(2) (CH(2)Cl(2)), CHCl(3) (CHCl(3)), MeCN (MeCN)] and red [Fe(tpa)(NCS)(2)](2)·Y [Fe:Y = 2:1; Y = MeOH (MeOH), EtOH (EtOH)], respectively. Between the two forms, interesting solvent-vapor induced in situ reversible and irreversible guest molecule exchanges, [Fe(tpa)(NCS)(2)]·X ? [Fe(tpa)(NCS)(2)](2)·Y, occurred in the solid state followed by dramatic color changes as well as distinct structural and SCO behavior transformations. Comprehensive studies on structures and SCO behaviors associating guest exchanges have been conducted by X-ray single-crystal diffraction, PXRD, IR, elemental analysis, and magnetic measurements, respectively. This discrete molecular system shows unique solvent-dependent SCO behavior related to the nature of solvent molecules; the distinct color changes during guest exchange originate from the alternations of electronic states of the guest-sensitive Fe(II) centers, providing an effective route to fine-tune and optimize materials' properties by systematic structural perturbation, or serving for detection of toxic gases, such as CH(2)Cl(2) and CHCl(3).     

Solid‐State Emissive Aroyl‐S,N‐Ketene Acetals with Tunable Aggregation‐Induced Emission Characteristics

N‐Benzyl aroyl‐S,N‐ketene acetals can be readily synthesized by condensation of aroyl chlorides and N‐benzyl 2‐methyl benzothiazolium salts in good to excellent yields, yielding a library of 35 chromophores with bright solid‐state emission and aggregation‐induced emission characteristics. Varying the substituent from electron‐donating to electron‐withdrawing enables the tuning of the solid‐state emission color from deep blue to red.     

A 1,3‐Indandione‐Functionalized Tetraphenylethene: Aggregation‐Induced Emission,Solvatochromism, Mechanochromism,and Potential Application as a Multiresponsive Fluorescent Probe

A tetraphenylethene (TPE) derivative substituted with the electron‐acceptor 1,3‐indandione (IND) group was designed and prepared. The targeted IND‐TPE reserves the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, owing to the decorated IND moiety, IND‐TPE demonstrates intramolecular charge‐transfer process and pronounced solvatochromic behavior. When the solvent is changed from apolar toluene to highly polar acetonitrile, the emission peak redshifts from 543 to 597 nm. IND‐TPE solid samples show an evident mechanochromic process. Grinding of the as‐prepared powder sample induces a redshift of emission from green (peak at 515 nm) to orange (peak at 570 nm). The mechanochromic process is reversible in multiple grinding–thermal annealing and grinding–solvent‐fuming cycles, and the emission of the solid sample switches between orange (ground) and yellow (thermal/solvent‐fuming‐treated) colors. The mechanochromism is ascribed to the phase transition between amorphous and crystalline states. IND‐TPE undergoes a hydrolysis reaction in basic aqueous solution, thus the red‐orange emission can be quenched by OH^? or other species that can induce the generation of sufficient OH^?. Accordingly, IND‐TPE has been used to discriminatively detect arginine and lysine from other amino acids, due to their basic nature. The experimental data are satisfactory. Moreover, the hydrolyzation product of IND‐TPE is weakly emissive in the resultant mixture but becomes highly blue‐emissive after the illumination for a period by UV light. Thus IND‐TPE can be used as a dual‐responsive fluorescent probe, which may extend the application of TPE‐based molecular probes in chemical and biological categories.