Surface‐modified hydroxyapatite linked by L‐lactic acid oligomer in the absence of catalyst

A new surface modification method of hydroxyapatite nanoparticles (n‐HA) by surface grafting reaction of L ‐lactic acid oligomer with carboxyl terminal (LAc oligomer) in the absence of any catalyst was developed. The LAc oligomer with a certain molecular weight was directly synthesized by condensation of L ‐lactic acid. Surface‐modified HA nanoparticles (p‐HA) were attested by Fourier transformation infrared spectroscopy, ³¹P MAS‐NMR, and thermal gravimetric analysis (TGA). The results showed that LAc oligomer could be grafted onto the n‐HA surface by forming a Ca carboxylate bond. The grafting amount of LAc oligomer was about 13.3 wt %. The p‐HA/PLLA composites showed good mechanical properties and uniform microstructure. The tensile strength and modulus of the p‐HA/PLLA composite containing 15 wt % of p‐HA were 68.7 MPa and 2.1 GPa, respectively, while those of the n‐HA/PLLA composites were 43 MPa and 1.6 GPa, respectively. The p‐HA/PLLA composites had better thermal stability than n‐HA/PLLA composites and neat PLLA had, as determined by isothermal TGA. The hydrolytic degradation behavior of the composites in phosphate buffered saline (PBS, pH 7.4) was investigated. The p‐HA/PLLA composites lost their mechanical properties more slowly than did n‐HA/PLLA composites in PBS because of their reinforced adhesion between the HA filler and PLLA matrix. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5177–5185, 2005     

Computer simulations and theoretical aspects of the depletion interaction in protein-oligomer mixtures

The depletion interaction between proteins caused by addition of either uncharged or partially charged oligomers was studied using the canonical Monte Carlo simulation technique and the integral equation theory. A protein molecule was modeled in two different ways: either as (i) a hard sphere of diameter 30.0 A with net charge 0, or +5, or (ii) as a hard sphere with discrete charges (depending on the pH of solution) of diameter 45.4 A. The oligomers were pictured as tangentially jointed, uncharged, or partially charged, hard spheres. The ions of a simple electrolyte present in solution were represented by charged hard spheres distributed in the dielectric continuum. In this study we were particularly interested in changes of the protein-protein pair-distribution function, caused by addition of the oligomer component. In agreement with previous studies we found that addition of a nonadsorbing oligomer reduces the phase stability of solution, which is reflected in the shape of the protein-protein pair-distribution function. The value of this function in protein-protein contact increases with increasing oligomer concentration, and is larger for charged oligomers. The range of the depletion interaction and its strength also depend on the length (number of monomer units) of the oligomer chain. The integral equation theory, based on the Wertheim Ornstein-Zernike approach applied in this study, was found to be in fair agreement with Monte Carlo results only for very short oligomers. The computer simulations for a model mimicking the lysozyme molecule (ii) are in qualitative agreement with small-angle neutron experiments for lysozyme-dextran mixtures.     

Basic amino acid assisted‐fabrication of rectangular nanotube,circular nanotube,and hollow microsphere of polyaniline: Adjusting and controlling effect of pH value

This work reports a simple and effective method to prepare polyaniline (PANI) nanotubes with rectangular or circular cross section and hollow microspheres by using basic amino acids L ‐lysine or L ‐arginine as dopants and pH buffer agents, respectively. The research reveals that the pH value of the reaction solution at the beginning stage is a crucial factor to form PANI microstructures. The L ‐lysine and L ‐arginine have isoelectric point 9.74 and 10.76, which can maintain reaction solution at high pH value at the beginning reaction and assist aniline to couple in ortho‐position forming phenazine unit in the oligomer chain. The oligomer produces rectangular nanorods or microspheres by interaction. These oligomer microstructures act as templates for further polymerization to form PANI rectangular nanotubes and hollow microspheres. Decreasing the concentration of the basic amino acid or using acidic amino acid, the round nanotubes are formed. This method provides a simple route to prepare PANI microstructures with different morphologies without any foreign template or surfactant, and raises a new view on the polymerization process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

LB Film Structure of Nanometer‐Scale PEEKK Macrocyclic Oligomers

A rigid macrocyclic oligomer (RCO), cyclic poly(aryl ether ketone), was synthesized and used to produce Langmuir‐Blodgett (LB) films. The isotherm of surface pressure versus surface area showed that the RCO molecules form a stable monolayer on the water subphase with an area per molecule of about 1.7 nm². The structure of the LB film was confirmed by means of atomic force microscope, and two‐dimensionally ordered cavities of nanometer scale were observed in the LB film.     

Photoinduced polymerization of maleic anhydride in dioxane

Maleic anhydride (MAn) was irradiated with ultraviolet light in dioxane at 35°C without initiator, and predominantly a MAn oligomer was obtained with a small quantity of cyclic dimer of MAn. Mass spectrometric, NMR, and elementary analysis investigation of the oligomer showed that it is composed of about four MAn units and one dioxane molecule per molecule.     

芳醚酮大环封端聚酰亚胺的合成与交联

本文制备了一种含硫醚键环状芳醚酮单体, 并将其引入聚酰亚胺中, 在不存在引发剂的条件下, 能开环交联反应制备出全芳香高热稳定的可交联聚酰亚胺.     

Self‐immolative nanoparticles triggered by hydrogen peroxide and pH

The azomethine‐based oligomers bearing boronate groups and imine moieties in the main chain were synthesized from a dialdehyde monomer and an aromatic (oligomer 4 ) diamine or an aliphatic diamine (oligomer 5 ). Based on the oligomers, the nanoparticles with hydrogen peroxide (H₂O₂) and pH dual‐responsive properties were constructed and encapsulated nile red inside. The nanoparticles disassembled either by the trigger of H₂O₂ or by the attack of H⁺, thus leading to the release of loaded species. Compared to oligomer 4 , oligomer 5 showed a faster degradation rate in the presence of H₂O₂, especially in a weak acidic environment. No significant cytotoxicity was observed as HeLa cells incubated in the nanoparticles with the concentration up to 200 μg/mL evidenced by cytotoxicity assay in vitro. Such a system capable of dual response of H₂O₂ and H⁺ may have potential application as a carrier for drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1962–1969     

Stoichiometric formation of methyl methacrylate oligomer by triethylaluminum in the presence of azobisisobutyronitrile

The yield of methyl methacrylate (MMA) polymerization as a function of triethylaluminum (TEA) concentration for a constant azobisisobutyronitrile (AIBN) concentration at 50°C has been measured. The polymerization yield does not differ markedly from that with AIBN alone as long as the initial TEA concentration is held smaller than four times the initial AIBN concentration. A sudden decrease in yield and molecular weight is observed at TEA/AIBN concentration ratios between 4 and 5. A plot of M?_w^?1 vs. TEA gives a rate-transfer constant of 89 1./mole-sec. If the reaction mixture is vacuum-evaporated with a previous addition of water, instead of precipitating the polymer, the formation of a considerable amount of MMA oligomer is detected for TEA/AIBN concentration ratios larger than 4. On the average, each TEA molecule in excess of four times the initial amount of AIBN yields one oligomer molecule. The data are consistent with a radical polymerization mechanism for the high molecular weight polymer and with a nonradical one for the oligomer formation.     

A Main‐Chain Liquid‐Crystalline Oligomer Prepared by in situ Photopolymerization of an LC Monomer Having Cinnamate Moieties

Summary: A liquid‐crystalline (LC) compound, having a cinnamate moiety on each end of the molecule, was synthesized and irradiated with UV light in its LC phase in the presence of a triplet sensitizer. Various measurements of the irradiated sample revealed that the linearly structured LC oligomers were formed by [2+2] cycloaddition of the cinnamate moieties, and that the resultant cyclobutane units dominantly assumed an anti head‐to‐head configuration.

Schematic structures of the LC oligomer obtained by photopolymerization.     

Stereocontrolled protein surface recognition using chiral oligoamide proteomimetic foldamers

The development of foldamers capable of selective molecular recognition of solvent exposed protein surfaces represents an outstanding challenge in supramolecular chemical biology. Here we introduce an oligoamide foldamer with well-defined conformation that bears all the hallmarks of an information rich oligomer. Specifically, the foldamer recognizes its target protein hDM2 leading to inhibition of its protein–protein interaction with p53 in a manner that depends upon the composition, spatial projection and stereochemistry of functional groups appended to the scaffold. Most significantly, selective inhibition of p53/hDM2 can be achieved against four other targets and the selectivity for p53/hDM2 inhibition versus Mcl-1/NOXA-B inhibition is critically dependent upon the stereochemistry of the helix mimetic.     

Highly unsaturated polymers Communication 6. Poly(1, 3, 5-triethynylbenzene)

Summary A highly unsaturated triacetylenic hydrocarbon, 1,3,5-triethynylbenzene, was synthesized, and the oxidative polycondensation of this gave a three-dimensional oligomer containing alternating diacetylenic groups and aromatic nuclei in its molecule.For Communications 1–5 see [1–5].     

Near‐monodisperse,catalytically active,imidazole‐containing homooligomers: Synthesis by group transfer polymerization and solution characterization

Oligomers covering degrees of polymerization up to 23 of 2‐(1‐imidazolyl)ethyl methacrylate (ImEMA) were synthesized by group transfer polymerization (GTP) in propylene carbonate and tetrahydrofuran (THF). While GTP proceeds smoothly in propylene carbonate, polymerization in THF is accompanied by oligomer precipitation. The molecular weights (MWs) and molecular weight distributions (MWDs) of the oligomers were obtained by gel permeation chromatography (GPC) using acidic aqueous sodium nitrate as the eluent. Good control over the MW and small polydispersity indices (PDIs) were measured for the oligomers prepared in propylene carbonate but not in THF. The oligomers were evaluated for their ability to hydrolyze 4‐nitrophenyl acetate in aqueous solution. The hydrolytic activity increased with oligomer MW. The oligomer concentration‐ and substrate concentration‐dependencies of the initial hydrolysis rate were both found to be approximately first order. The hydrolytic activity increased with an increase in pH, manifesting the enhanced nucleophilicity and pronounced hydrophobicity of the unprotonated form of the repeating units. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1501–1512, 1999     

pH-dependent binding of guests in the cavity of a polyhedral coordination cage: reversible uptake and release of drug molecules

A range of organic molecules with acidic or basic groups exhibit strong pH-dependent binding inside the cavity of a polyhedral coordination cage. Guest binding in aqueous solution is dominated by a hydrophobic contribution which is compensated by stronger solvation when the guests become cationic (by protonation) or anionic (by deprotonation). The Parkinson''s drug 1-amino-adamantane (‘amantadine’) binds with an association constant of 10⁴ M^–1 in the neutral form (pH greater than 11), but the stability of the complex is reduced by three orders of magnitude when the guest is protonated at lower pH. Monitoring the uptake of the guests into the cage cavity was facilitated by the large upfield shift for the ¹H NMR signals of bound guests due to the paramagnetism of the host. Although the association constants are generally lower, guests of biological significance such as aspirin and nicotine show similar behaviour, with a substantial difference between neutral (strongly binding) and charged (weakly binding) forms, irrespective of the sign of the charged species. pH-dependent binding was observed for a range of guests with different functional groups (primary and tertiary amines, pyridine, imidazole and carboxylic acids), so that the pH-swing can be tuned anywhere in the range of 3.5–11. The structure of the adamantane-1-carboxylic acid complex was determined by X-ray crystallography: the oxygen atoms of the guest form CH···O hydrogen bonds with one of two equivalent pockets on the internal surface of the host. Reversible uptake and release of guests as a function of pH offers interesting possibilities in any application where controlled release of a molecule following an external stimulus is required.     

Concentration‐Dependent Self‐Assembly of a Novel Comb Oligomer Having Rigid Binaphthyl Macrocyclic Pendants

Summary: The synthesis and self‐assembly of a comb oligomer having rigid racemic binaphthyl macrocyclic pendant groups are described. The coupling of two structural motifs at the molecular level, e.g., a nanometer‐size chiral cavity, and a flexible polymeric backbone, could lead to new opportunities in molecular recognition and separation. The macrocyclic monomers were synthesized followed by introduction of an acrylate side‐group, and through free‐radical polymerization, they yielded a comb oligomer. Most importantly, this novel oligomer can self‐assemble into solid or hollow spheres when tetrahydrofuran (THF) solutions of the oligomer at different concentrations are dropped onto the surface of water. The morphology of the solid or hollow spheres was observed by TEM, ESEM and DLS.

A schematic illustration of the processes of self‐assembly of the oligomer.     

pH-responsive and switchable triplex-based DNA hydrogels

New methods for the preparation of reversible pH-responsive DNA hydrogels based on Hoogsteen triplex structures are described. One system consists of a hydrogel composed of duplex DNA units that bridge acrylamide chains at pH = 7.4 and undergoes dissolution at pH = 5.0 through the reconfiguration of one of the duplex bridging units into a protonated CG·C⁺ triplex structure. The second system consists of a hydrogel consisting of acrylamide chains crosslinked in the presence of an auxiliary strand by Hoogsteen TA·T triplex interaction at pH = 7.0. The hydrogel transforms into a liquid phase at pH = 10.0 due to the separation of the triplex bridging units. The two hydrogel systems undergo reversible and cyclic hydrogel/solution transitions by subjecting the systems to appropriate pH values. The anti-cancer drug, coralyne, binds specifically to the TA·T triplex-crosslinked hydrogel thereby increasing its stiffness. The pH-controlled release of the coralyne from the hydrogel is demonstrated.     

Aromatic amine‐terminated polysulfide oligomer: Synthesis and application in self‐healable polyurea

The dynamic chemistry of disulfide bonds has emerged as one of the most powerful tools used for the fabrication of organic compounds and self‐healing materials. In this article, a novel aromatic amine‐terminated polysulfide oligomer is first synthesized from thiol‐terminated polysulfide oligomer and bis(4‐aminophenyl) disulfide via disulfide metathesis mechanism. The resulting oligomer is confirmed by FTIR and ¹H NMR spectra and then successfully applied in constructing self‐healable polyurea material (A‐LP23‐I), which combines the advantages of higher strength of polyureas and excellent self‐healing ability of polysulfide‐based materials. After subjecting to a temperature of 75 °C for 48 h, both the tensile strength and ultimate elongation of A‐LP23‐I restore to more than 90% of the original values (3.32 MPa and 396%). This study demonstrates a novel strategy for synthesizing aromatic amine‐terminated oligomer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1460–1466     

Liquid crystalline non-linear S-shaped oligomers consisting of azobenzene and biphenylene units: synthesis,characterisation and influence of central spacer

A series of non-linear S-shaped liquid crystal oligomers wherein the molecule consists of biphenylene moiety as a central core unit and two symmetrical side arms azobenzene moieties joined to catechol as a linkage group have been successfully synthesised and characterised. The members in this series possess different inner spacer with carbon number n ranging from 4 to 9 while the outer spacer length located in azobenzene moieties are remains unaltered. The members with even parity exhibit monotropic phase, whereas homologues with odd parity display enantiotropic phase. The appearance of nematic, smectic A and smectic B phases was validated with texture observation under polarised light and X-ray diffraction (XRD). The XRD study on the S-shaped oligomer indicates that the arrangement of smectic phase exists as an intercalated structure. The S-shaped oligomer shows photoisomerisation properties in solution whereby the trans to cis isomerisation for this molecule is accomplished 1140 s, whereas reverse process under thermal back reaction occurred in 4620 min.     

Calcium-induced tetramerization and zinc chelation shield human calprotectin from degradation by host and bacterial extracellular proteases

Calprotectin (CP, S100A8/S100A9 oligomer, MRP-8/14 oligomer, calgranulins A and B) is a protein component of the innate immune system that contributes to the metal-withholding response by sequestering bioavailable transition metal ions at sites of infection. Human CP employs Ca(ii) ions to modulate its quaternary structure, transition metal binding properties, and antimicrobial activity. In this work, we report the discovery that Ca(ii)-induced self-association of human CP to afford heterotetramers protects the protein scaffold from degradation by host serine proteases. We present the design and characterization of two new human CP-Ser variants, S100A8(C42S)(I60E)/S100A9(C3S) and S100A8(C42S)(I60K)/S100A9(C3S), that exhibit defective tetramerization properties. Analytical size exclusion chromatography and analytical ultracentrifugation reveal that both variants, hereafter I60E and I60K, persist as heterodimers in the presence of Ca(ii) only, and form heterotetramers in the presence of Mn(ii) only and both Ca(ii) and Mn(ii). Coordination to Fe(ii) also causes I60E and I60K to form heterotetramers in both the absence and presence of Ca(ii). The Ca(ii)-bound I60E and I60K heterodimers are readily degraded by trypsin, chymotrypsin, and human neutrophil elastase, whereas the Ca(ii)-bound CP-Ser heterotetramers and the Ca(ii)- and Mn(ii)-bound I60E and I60K heterotetramers are resistant to degradation by these host proteases. The staphylococcal extracellular protease GluC cuts the S100A8 subunit of CP-Ser at the C-terminal end of residue 89 to afford a ΔSHKE variant. The GluC cleavage site is in close proximity to the His₃Asp metal-binding site, which coordinates Zn(ii) with high affinity, and Zn(ii) chelation protects the S100A8 subunit from GluC cleavage. Taken together, these results provide new insight into how Ca(ii) ions and transition metals modulate the chemistry and biology of CP, and indicate that coordination to divalent cations transforms human CP into a protease-resistant form and enables innate immune function in the hostile conditions of an infection site.     

Increased carrier mobility in end-functionalized oligosilanes

We show that a class of oligosilane–arene σ, π-hybrid materials exhibits distinct and enhanced solid-state electronic properties relative to its parent components. In the single crystal structure, the σ-conjugation axis of one molecule points towards the π-face of a neighboring molecule due to an unusual gauche conformation. This organization is hypothesized to be beneficial for charge transport. We show that solution-deposited crystalline films of the hybrid materials show up to a 100-fold increase in space-charge limited current (SCLC) mobility relative to literature reports of photoinduced hole transport in oligosilane films. The discovery that σ, π-hybrids are more than the sum of their parts offers a design opportunity for new materials.     

Reversed‐phase ion‐pair high‐performance liquid chromatography assay of polyprenyl diphosphate oligomer homologues

A reversed‐phase ion‐pair high‐performance liquid chromatography procedure was developed for the separation of polyprenyl diphosphate oligomer homologues obtained chemically from plant polyprenols. Tetrabutylammonium phosphate was used as the ion‐pair reagent, and the dependence of the separation quality on pH of ion‐pair reagent was investigated for the first time. The procedure is applicable for the control of commercial available polyprenyl monophosphates (the active components of veterinary drugs Phosprenyl and Gamapren) for the possible presence of polyprenyl diphosphate byproducts.