Bioactive heparin immobilized onto microfluidic channels in poly(dimethylsiloxane) results in hydrophilic surface properties

A new composition of heparin coating for microfluidic systems made out of poly(dimethylsiloxane) (PDMS) was developed and evaluated. The coating that consists of a conditioning polyamine layer followed by two heparin/glutaraldehyde layers, resulted in channel surfaces with sufficient wettability to obtain flow of human normal plasma by capillary force alone. Hydrophilic channel walls are a desirable characteristic in microfluidic devices, since alternative pumping mechanisms must otherwise be included into the system. The immobilized heparin showed high antithrombin-binding capacity and a low degree of blood–material interaction. Plasma in contact with heparin-coated PDMS formed no detectable fibrin in a spectrophotometric assay by which plasma in contact with non-treated PDMS showed complete coagulation. The quartz crystal microbalance technique with energy dissipation monitoring (QCM-D) was utilized to obtain detailed information regarding adsorption kinetics and structural properties of the different layers composing the heparin coating.     

Wettability control and patterning of PDMS using UV-ozone and water immersion

We demonstrate a simple method to tune and pattern the wettability of polydimethylsiloxane (PDMS) to generate microfluidic mimics of heterogeneous porous media. This technique allows one to tailor the capillary forces at different regions within the PDMS channel to mimic multi-phase flow in oil reservoirs. In this method, UV-ozone treatment is utilized to oxidize and hydrophilize the surface of PDMS. To maintain a stable surface wettability, the oxidized surfaces are immersed in water. Additionally, the use of a photomask makes it convenient to pattern the wettability in the porous media. A one-dimensional diffusive reaction model is established to understand the UV-ozone oxidation as well as hydrophobic recovery of oxidized PDMS surfaces. The modeling results show that during UV-ozone, surface oxidation dominates over diffusion of low-molecular-weight (LMW) species. However, the diffusivity of LMW species plays an important role in wettability control of PDMS surfaces.     

Bioactive surface modification of mica and poly(dimethylsiloxane) with hydrophobins for protein immobilization

Bioactive surfaces with appropriate hydrophilicity for protein immobilization can be achieved by hydrophobin II (HFBI) self-assembly on mica and polydimethylsiloxane (PDMS) surfaces. X-ray photoelectron spectroscopy and water contact angle measurements illustrated that the surface wettability can be changed from superhydrophobic (PDMS) or superhydrophilic (mica) to moderately hydrophilic, which is suitable for protein (chicken IgG) immobilization on both substrate surfaces. The results suggest that HFBI assembly, one kind of hydrophobin from Trichoderma reesei, may be a versatile and convenient method for the immobilization of biomolecules on diverse substrates, which may have potential applications in biosensors, immunoassays, and microfluidic networks.     

Hydrophilic surface modification of polydimetylsiloxane‐co‐2‐hydroxyethylmethacrylate (PDMS‐HEMA) by Silwet L‐77 (heptamethyltrisiloxane) surface treatment

Biomaterials and their host organism's quintessential place of interaction are the surfaces of materials, as transportation of liquids within microchannels requires hydrophilic surfaces. Modifying the hydrophobic surface of polydimethylsiloxane (PDMS) into a hydrophilic one which can be used in biomaterials remains a big challenge. Herein, PDMS‐hydroxyethylmethacrylate (HEMA) films were prepared by the condensation of PDMS using isophorone diisocyanate as a cross‐linker, followed by the incorporation of HEMA via radical copolymerization. The as‐prepared PDMS‐HEMA films were thereafter hydrophilized via physical treatment with heptamethyltrisiloxane. The surface properties of the obtained PDMS‐HEMA films were characterized in wettability, morphology, topography, swelling, mechanical properties, and protein adsorption. Compared to pristine PDMS‐HEMA as control, the surface wettability, roughness, and protein adsorption of the hydrophilized PDMS‐HEMA films were significantly improved while the films also exhibited excellent optical properties. However, the improvement of the swelling properties remains insignificant, indicating that the interior morphology was still based on the hydrophobic siloxane PDMS. The long‐term hydrophilicity was considered good as no significant hydrophobic recovery was noticeable in a period of 5 months after treatment.     

Macromolecular Coating Enables Tunable Selectivity in a Porous PDMS Matrix

Whether for laboratory use or clinical practice, many fields in Life Sciences require selective filtering. However, most existing filter systems lack the ability to easily tune their filtration behavior. Two key elements for efficient filtering are a high surface‐to‐volume ratio and the presence of suitable chemical groups which establish selectivity. In this study, an artificial PDMS‐based capillary system with highly tunable selectivity properties is presented. The high surface‐to‐volume ratio of this filter system is generated by first embedding sugar fibers into a synthetic polymer matrix and then dissolving these fibers from the cured polymer. To functionalize this filter, the inner surface of the capillaries is coated with purified or synthetic macromolecules. Depending on the type of macromolecule used for filter functionalization, selective sieving is observed based on steric hindrance, electrostatic binding, electrostatic repulsion, or specific binding interactions. Furthermore, it is demonstrated that enzymes can be immobilized in the capillary system which allows for performing multiple cycles of enzymatic reactions with the same batch of enzymes and without the need to separate the enzymes from their reaction products. In addition to lab‐scale filtration and enzyme immobilization applications demonstrated here, the functionalized porous PDMS matrix may also be used to test binding interactions between different molecules.     

Tuning microchannel wettability and fabrication of multiple-step Laplace valves

By using characteristics of titania nanoparticles, a patterning and tuning method of microchannel surface wettability was developed for microfluid control. Titania modification of a microchannel provided a nanometer-sized surface roughness and the subsequent hydrophobic treatment made the surface superhydrophobic. Photocatalytic decomposition of the coated hydrophobic molecules was used to pattern the surface wettability which was tuned in the range from superhydrophobic to superhydrophilic under controlled photoirradiation. Four-step wettability-based Laplace valves working as passive stop valves (6.8-12.5 kPa pressure barrier) were prepared by using the patterned and tuned surface. As a demonstration, a batch operation system consisting of two sub-nL dispensers and a reaction chamber was constructed. Fundamental liquid manipulations required for the batch operation were successfully conducted, including liquid measurement (390 and 770 pL), transportation, injection into the chamber, and retention in the chamber. To verify the quantitative operation, the system was applied to a fluorescence quenching experiment as an example of volumetric analyses. The present method provides flexible patterning in a wide range of tuned wettability surfaces in microchannels even after channel fabrication and it can be applied to various two- or multi-phase microfluidic systems.     

Combinable poly(dimethyl siloxane) capillary sensor array for single-step and multiple enzyme inhibitor assays

We describe a new method for fabricating a capillary-type sensor, called a combinable poly(dimethyl siloxane) (PDMS) capillary (CPC) sensor. The method for preparing the CPC simplifies enzyme inhibitor assays into a simple, single step assay. The sample inhibitor solution is introduced by capillary action. This triggers the spontaneous dissolution of physically adsorbed fluorescent substrates, and the substrate mixes with the inhibitor. This is followed by competitive reaction with insoluble enzyme to give a fluorescence response. CPC is composed of a convex-shaped PDMS stick containing reagents immobilized in an insoluble coating, and a concave-shaped PDMS stick containing reagents immobilized in a soluble coating. Since the concave-shaped PDMS has a deeper channel than the convex structure, combining these PDMS sticks is like closing the zipper of a "freezer bag". This allows easy fabrication of "thin and long" capillary structures containing different reagents inside the same capillary, without the need for precise alignment. This method allows the immobilization of two reactive reagents, such as enzyme and substrate required for a single step assay, which are typically very difficult to immobilize using commercially available conventional capillaries. Furthermore, by simply arraying various CPCs, the CPC sensor allows multiple assays. Here, we carried out a single-step enzyme inhibitor assay using the CPC. In addition, two independent CPCs were arrayed to demonstrate multiple assaying of a protease inhibitor.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

4He+ ion beam irradiation induced modification of poly(dimethylsiloxane). Characterization by infrared spectroscopy and ion beam analytical techniques

In this study we investigated the chemical and surface wettability changes of poly(dimethylsiloxane) (PDMS) induced by a 2.0 MeV He(+) beam irradiation. The chemical changes created in PDMS were characterized by universal attenuated total reflectance infrared (UATR-FTIR) spectroscopy, while the changes of the wettability were determined by contact angle measurements. In a separate analysis, hydrogen depletion was also investigated with a 1.6 MeV He(+) beam by applying the elastic recoil detection analysis (ERDA) and Rutherford backscattering spectrometry techniques simultaneously. The ERDA results showed that the hydrogen content of PDMS decreased irreversibly, which means that volatile products were formed under radiolysis, such as hydrogen or methane. The results were completed with UATR-FTIR measurements. We propose a complete reaction mechanism for the processes taking place in PDMS. These ion beam induced processes, such as chain scissions, cross-linking, and depletion of small molecular weight fragments, lead to the formation of a silica-like final product (SiO(x)). The significant chemical changes at the surface influence the wettability of PDMS, making it considerably more hydrophilic. The penetration depth of the 2.0 MeV He(+) ions is significantly higher compared to that of other surface modification techniques, which makes the modified layer thick and homogeneous; on the other hand, it is easily controllable by the energy of the incident ions.     

Surface-charge lithography for direct PDMS micro-patterning

Direct patterning of PDMS films is achieved by modulating the wettability of polar dielectric substrates. Periodic array structures of microbumps can be madeup by functionalizing periodically poled lithium niobate crystals. The modulation of surface wettability is obtained through the spatial distribution of the surface electric charges generated by the pyroelectric effect under electrode-less configuration. An appropriate thermal treatment of the substrates assures both the wettability patterning and the fast cross-linking of the PDMS film.     

BHK cells behaviour on laser treated polydimethylsiloxane surface

The surface of polydimethylsiloxane (PDMS) was modified using a CO2-pulsed laser to evaluate the changes in physical and biological properties of the treated surface. Attachment of anchorage dependent cells, namely baby hamster kidney (BHK) fibroblastic cells, on PDMS surface was investigated in stationary culture conditions. BHK cell adhesion and growth on the PDMS surfaces were studied using scanning electron microscopy (SEM) and optical microscopy. To evaluate the surface wettability, water drop contact angles were determined. The laser treated PDMS surfaces showed high hydrophobicity and low cell adhesion, no spreading and growth in comparison with the unmodified PDMS. It was found that both the wettability and surface structure of the PDMS surface control cell attachment and growth.     

分子自组装单层膜的表面浸润性研究现状和展望

立足于分子自组装单层膜的制备及结构, 讨论了分子自组装单层膜的头基基团与基底的作用机理、 主链与环境的温度依赖关系, 特别是其端基基团的化学性质及构象对表面浸润行为的影响. 重点讨论了分子自组装单层膜的端甲基基团对表面能的贡献、 极性端基基团与水分子之间的相互作用以及自组装单层膜表面的分子尺寸粗糙度对表面浸润的影响. 最后, 基于理论和实验基础对以上问题提出新的认知与看法, 并对未来该领域发展的机遇与挑战进行了展望.     

Surface modification using a novel type I hydrophobin HGFI

Surface wettability conversion with hydrophobins is important for its applications in biodevices. In this work, the application of a type I hydrophobin HGFI in surface wettability conversion on mica, glass, and poly(dimethylsiloxane) (PDMS) was investigated. X-ray photoelectron spectroscopy (XPS) and water-contact-angle (WCA) measurements indicated that HGFI modification could efficiently change the surface wettability. Data also showed that self-assembled HGFI had better stability than type II hydrophobin HFBI. Protein patterning and the following immunoassay illustrated that surface modification with HGFI should be a feasible strategy for biosensor device fabrication. Figure A hydrophobin HGFI has been applied into surface wettability conversion for protein immobilization Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Topography printing to locally control wettability

This paper reports a new patterning method, which utilizes NaOH to facilitate the irreversible binding between the PDMS stamp and substrates and subsequent cohesive mechanical failure to transfer the PDMS patterns. Our method shows high substrate tolerance and can be used to "print" various PDMS geometries on a wide range of surfaces, including Si100, glass, gold, polymers, and patterned SU8 photoresist. Using this technique, we are able to locally change the wettability of substrate surfaces by printing well-defined PDMS architectures on the patterned SU8 photoresist. It is possible to generate differential wetting and dewetting properties in microchannels and in the PDMS printed area, respectively.     

A many-body dissipative particle dynamics study of forced water-oil displacement in capillary

The forced water-oil displacement in capillary is a model that has important applications such as the groundwater remediation and the oil recovery. Whereas it is difficult for experimental studies to observe the displacement process in a capillary at nanoscale, the computational simulation is a unique approach in this regard. In the present work, the many-body dissipative particle dynamics (MDPD) method is employed to simulate the process of water-oil displacement in capillary with external force applied by a piston. As the property of all interfaces involved in this system can be manipulated independently, the dynamic displacement process is studied systematically under various conditions of distinct wettability of water in capillary and miscibility between water and oil as well as of different external forces. By analyzing the dependence of the starting force on the properties of water/capillary and water/oil interfaces, we find that there exist two different modes of the water-oil displacement. In the case of stronger water-oil interaction, the water particles cannot displace those oil particles sticking to the capillary wall, leaving a low oil recovery efficiency. To minimize the residual oil content in capillary, enhancing the wettability of water and reducing the external force will be beneficial. This simulation study provides microscopic insights into the water-oil displacement process in capillary and guiding information for relevant applications.     

Binary self-assembled monolayers of alkanethiols on gold: deposition from solution versus microcontact printing and the study of surface nanobubbles

The coadsorption of alkanethiols on noble metals has been recognized for a long time as a suitable means of affording surfaces with systematically varied wettability and other properties. In this article, we report on a comparative study of the composition of the mixed self-assembled monolayers (SAMs) obtained (i) by the coadsorption of octadecanethiol (ODT) and 16-mercaptohexadecanoic acid (MHDA) from ethanol and chloroform onto gold substrates and (ii) by microcontact printing using poly(dimethyl siloxane) (PDMS) stamps. SAMs prepared by coadsorption from solution showed a preferential adsorption of ODT for both solvents, but this trend was reversed in microcontact-printed SAMs when using chloroform as a solvent, as evidenced by contact angle and Fourier transform infrared (FTIR) spectroscopy measurements. An approximately linear relationship between the static contact angle and the degree of swelling with different solvents was observed, which suggests that the surface composition can be controlled by the interaction of the solvent and the PDMS elastomer. The altered preference is attributed to the different partitioning of the two thiols into solvent-swelled PDMS, as shown by (1)H NMR spectroscopy. Finally, molecularly mixed binary SAMs on ODT and MHDA on template-stripped gold were applied to study the effect of surface nanobubbles on wettability by atomic force microscopy (AFM). With a decreasing macroscopic contact angle measured through water, the nanoscopic contact angle was found to decrease as well.     

Na-K liquid alloy:A review on wettability enhancement and ionic carrier selection mechanism

The intrinsic liquid interface of Na-K alloy allays concerns about dendrite growth on metal anodes that are thermodynamically within the room temperature(20-22℃).Nevertheless,it hinders the formation of a stable electrode structure due to the inferior wettability induced by considerable liquid tension.In addition,the dominant ionic carrier in the Na-K alloy is subject to multiple factors,which is not conducive to customized battery design.This review,based on recently reported frontier achievements on Na-K liquid anodes,summarizes practical strategies for promoting the wettability by hightemperature induction,capillary effect,vacuum infiltration,and solid interface protection.Furthermo re,four selection mechanisms of the dominant ionic carrier are presented:(1) ion property dominated,(2)cathode dominated,(3) separator dominated,and(4) solid electrolyte interface dominated.Notably,initial electrolytes in energy storage systems have been unable to play a decisive role in ionic selection.Utilizing a superior wettability strategy and simultaneously identifying the dominant ionic carrier can facilitate the tailored application of dendrite-free Na-K liquid anodes.     

Improvement of thermal conductivity of poly(dimethyl siloxane) using silica-coated multi-walled carbon nanotube

In order to enhance the thermal conductivity of MWCNT filled poly(dimethyl siloxane) (PDMS) composites, the MWCNT was coated with silica layer by three step reactions. The composites filled with raw and silica-coated MWCNTs were prepared and the properties were investigated in terms of the curing characteristics, mechanical properties, and thermal conductivity. Due to the poor compatibility between raw MWCNT and PDMS, raw MWCNT showed poor dispersion uniformity and wettability in PDMS. On the other hand, due to the chemical affinity between silica/MWCNT and PDMS throughout the hydrogen bonding, the silica-coated MWCNT filled PDMS showed improved mechanical properties in terms of tensile strength and 100% modulus, and good interfacial compatibility than raw MWCNT incorporated PDMS. Finally, the good wettability of silica/MWCNT in PDMS resulted in higher thermal conductivity caused from the facile phonon movement at the interface even with the smaller MWCNT contents.     

Polydimethylsiloxane Coating for a Palladium/MOF Composite: Highly Improved Catalytic Performance by Surface Hydrophobization

Surface wettability of active sites plays a crucial role in the activity and selectivity of catalysts. This report describes modification of surface hydrophobicity of Pd/UiO‐66, a composite comprising a metal–organic framework (MOF) and stabilized palladium nanoparticles (NPs), using a simple polydimethylsiloxane (PDMS) coating. The modified catalyst demonstrated significantly improved catalytic efficiency. The approach can be extended to various Pd nanoparticulate catalysts for enhanced activity in reactions involving hydrophobic reactants, as the hydrophobic surface facilitates the enrichment of hydrophobic substrates around the catalytic site. PDMS encapsulation of Pd NPs prevents aggregation of NPs and thus results in superior catalytic recyclability. Additionally, PDMS coating is applicable to a diverse range of catalysts, endowing them with additional selectivity in sieving reactants with different wettability.     

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Polydimethylsiloxane (PDMS) is a widely used material for manufacturing lab-on-chip devices. However, the hydrophobic nature of PDMS is a disadvantage in microfluidic systems. To transform the hydrophobic PDMS surface to hydrophilic, it was treated with radio-frequency (RF) air plasma at 150, 300, and 500 mTorr pressures for up to 30 min. Following the surface treatment, the PDMS specimens were stored in air, deionized water, or 0.14 M NaCl solution at 4 degrees C, 20 degrees C, and 70 degrees C. The change in the hydrophilicity (wettability) of the PDMS surfaces was followed by contact angle measurements and Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy as a function of time. As an effect of the RF plasma treatment, the contact angles measured on PDMS surfaces dropped from 113 +/- 4 degrees to 9 +/- 3 degrees . The chamber pressure and the treatment time had no or negligible effect on the results. However, the PDMS surface gradually lost its hydrophilic properties in time. The rate of this process is influenced by the difference in the dielectric constants of the PDMS and its ambient environment. It was the smallest at low temperatures in deionized water and largest at high temperatures in air. Apparently, the OH groups generated on the PDMS surface during the plasma treatment tended toward a more hydrophilic/less hydrophobic environment during the relaxation processes. The correlation between the FTIR-ATR spectral information and the contact angle data supports this interpretation.