Synthesis and structures of the η5-C5H5Cl(CO)2W-η1,η5-(PPh2)C5H4(CO)2Fe-η1,η5-C5H4Mn(CO)3 and MeSi[C5H4(CO)2Fe-η1,η5-C5H4Mn(CO)2PPh3]3 complexes

The metallation of the η⁵-C₅H₅(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ complex with BuⁿLi (THF, ?78 °C) followed by the treatment of the lithium derivative with Ph₂PCl afforded the η⁵-Ph₂PC₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ complex. The reaction of the latter with η⁵-C₅H₅(CO)₃WCl in the presence of Me₃NO produced the trinuclear complex η⁵-C₅H₅Cl(CO)₂W-η¹,η⁵-(Ph₂P)C₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃. The structure of the latter complex was established by IR, UV, and 1H and ³¹P NMR spectroscopy and X-ray diffraction. The reaction of MeSiCl₃ with three equivalents of LiC₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₂PPh₃ gave the hexanuclear complex MeSi[C₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₂PPh₃]₃.     

Substitution and insertion reactions of (η5-C5H5)Cr(CO)3C2H5

The complex (η⁵-C₅H₅)Cr(CO)₃Cp42 H₅ has been made and its reactions with σ donor ligands L (L = (MeO)₃P and (EtO)₃P) and with SO₂ studied. The alkyl phosphites give compounds of the composition (η⁵-C₅H₅)Cr(CO)₂LC₂H₅, and sulfur dioxide gives the corresponding S-sulfinato (η⁵-C₅H₅)Cr(CO)₃SO₂C₂H₅.     

Insertion reactions of t-Bu(η5-C5H5)Fe(CO)2

The complex t-Bu(η⁵-C₅H₅)FE(CO)₂ has been treated with triphenylphosphine in refluxing THF to produce t-BuCO(η⁵-C₅H₅)Fe(CO)(PPh₃). The large steric bulk of the t-butyl group suggests that this reaction should be faster than the reaction involving the methyl group, and a kinetic investigation illustrates this to be the case. The same steric bulk predicts that the reaction with SO₂ should be slow, and indeed we have been unable to effect the related SO₂ insertion reaction. Attempts to prepare the corresponding t-Bu(η⁵-C₅H₅)W(CO)₃ led to formation of the related isobutyl complex.     

Molecular structure of ansa-compound (η5-C5H4)CMe2(η5-C9H6)TiCl2

The structure of a new ansa compound, (⁵-C₅H₄)CMe₂(⁵-C₉H₆)TiCl₂ (1), was studied by X-ray analysis:a = 15.00(1),b =15.500(5),c = 13.032(4) Å, = 92.66°(4),V = 3025.1(1) ų, space groupP2₁/.,R = 0.038. The distorted tetrahedral coordination sphere of the Ti atom is formed by two Cl atoms and two -ligands. It was proposed that the angle () between theC-M direction and the line normal to M-Cp can be considered as one of the geometric parameters characteristic of the structure-properties correlation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 305–308, February, 1995.     

Preparation and crystal structures of [μ-SbPh2]2[Mo(CO)2(η5-C5H5)]2·CHCl3 and SbPh[Fe(CO)2(η5-C5H5)]2

Antimony is reduced when [SbPh₂BrO]₂ is treated with Na[Mo(CO)₃(η⁵-C₅H₅)] to produce [μ-SbPh₂]₂[Mo(CO)₂(η⁵-C₅H₅)]₂. A structure determination shows diphenylstibido groups bridging between two Mo(CO)₂(η⁵-C₅H₅) moieties giving a central ‘butterfly’ shaped Sb₂Mo₂ ring. The cyclopentadiene rings are trans to each other and Mo–Sb and Sb–Sb separations are both short. An iron analogue could not be obtained from [SbPh₂BrO]₂ and Na[Fe(CO)₂(η⁵-C₅H₅)] but a mixture of SbPh[Fe(CO)₂(η⁵-C₅H₅)]₂ and SbPh₂[Fe(CO)₂(η⁵-C₅H₅)] was obtained using SbPh₂Cl. An X-ray structure for SbPh[Fe(CO)₂(η⁵-C₅H₅)]₂ shows an open stibinidine structure.     

Replacement of terminal and bridging oxo groups by phenylimido groups in (η-C5H5)OMo(μ-O)2OMo(η-C5H5) giving (η-C5H5)(NPh)Mo(μ-NPh)2Mo(NPh)(η-C5H5)

The treatment of (η-C₅H₅)OMo(μ-O)₂MoO(η-C₅H₅) with excess phenylisocyanate at reflux in tetrahydrofuran yields the arylimido-substituted complex (η-C₅H₅)(NPh)Mo(η-NPh)₂Mo(NPh)(η-C₅H₅), which has been characterized by elemental analysis, and mass, IR and ¹H NMR spectra.     

The mechanism of fluxionality of (1,2,7-η3-2-Me-benzyl)(η5-C5H5)Mo(CO)2

It is shown that (1,2,7-η³-2-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits in solution as one isomer which is fluxional, probably via (7-η¹-2-Me-benzyl)((η⁵-C₅H₅)Mo(CO)₂, with ΔG^≠₃₇₀ = 23.6 ± 1.0 kcal mol⁻¹. In contrast, (1,2,7-η³-3-Me-benzyl)(η⁵-C₅H₅)Mo(CO)₂ exits as two isomers at −20°C, which undergo interconversion at room temperature with ΔG^≠ 15.7 kcal mol⁻¹. This dynamic process is an allyl rotation. It is probable that there is also a low energy [1,5]-sigmatropic shift.     

Synthesis and structure of (boratabenzene)rhodacarborane (η-7,8-C2B9H11)Rh(η-C5H5BMe)

The bromide complex [(η-C₅H₅BMe)RhBr₂]₂ (1) was synthesized by the reaction of the cyclooctadiene derivative (η-C₅H₅BMe)Rh(1,5-C₈H₁₂) with Br₂. The reaction of compound 1 with Tl[Tl(η-7,8-C₂B₉H₁₁)] gave (boratabenzene)rhodacarborane (η-7,8-C₂B₉H₁₁)Rh-(η-C₅H₅BMe) (2). The structure of compound 2 was determined by X-ray diffraction     

Cyclooctaselenadiazole: synthesis,decomposition pathway,and reaction with (η5-C5H5) Co(L)2 (L = C2H4, PPh3). Crystal and molecular structure of [(η5-C5H5)CO]2(μ2-η3,η2-C8H6Se)

Thermolysis of cyclooctaselenadiazole (2) yields only selenium-containing products. Compound 2 reacts with CpCo sources to give [(η⁵-C₅H₅)CO]₂(μ₂η³,η²-C₈H₆Se), a fluxional compound whose structure has been determined by X-Ray crystallography.     

Electron transfer in organometallic clusters: XIV. Crystal and electronic structures of the tricobalt carbon cluster (η5-C5H5)Fe[η5-C5H4-CCo3(CO)9] and the biscarbyne cluster (η5-C5H5)Fe[η5-C5H4CCo3(η5-C5H5)3CH]

The crystal and molecular structures of (η⁵-C₅H₅)Fe[η⁵--C₅H₄CCo₃(CO)₉] (1), Pna2₁, α 17.354, b 11.463, c 11.207 Å Z = 4, R = 0.053, R_w = 0.056 for 939 reflections (I>3σ(I)) at 293 K, and (η⁵-C₅H₅Fe[η⁵--C₅H₄CCo₃(η⁵C₅H₅)₃CH] (2), P2₁/n, a 13.807(9), b 11.254(4), c 13.991(9) Å, β 99.98(5)°, Z = 4, R = 0.033 and R_w = 0.033 for 3051 observed reflections (I>3σ(I)) at 180 K, have been determined by X-ray methods.The results provide a detailed characterisation of related tricobalt-carbon complexes directly bound to ferrocene residues. In 1 the ferrocenyl moiety tops the pyramidal CCo₃ cluster core, while in 2 the CCo₃C core is bipyramidal with a ferrocenyl substituent on one capping carbon atom and a hydrogen atom at the other. In both cases the ferrocenyl group is tilted towards one cobalt atom of the cluster core, a distortion believed to be the consequence of the non-degeneracy of the carbyne p(π) orbitals resulting from a cooperative π-interaction between the clusters and the ferrocenyl substituents.     

Structure and bonding analysis of dimethylgallyl complexes of iron, ruthenium, and osmium [(η5-C5H5)(CO)2M(GaMe2)] and [(η5-C5H5)(Me3P)2M(GaMe2)

Density functional theory calculations have been performed for the dimethylgallyl complexes of iron, ruthenium, and osmium [(η(5)-C(5)H(5))(L)(2)M(GaMe(2)] (M = Fe, Ru, Os; L = CO, PMe(3)) at the DFT/BP86/TZ2P/ZORA level of theory. The calculated geometry of the iron complex [(η(5)-C(5)H(5))(CO)(2)Fe(GaMe(2))] is in excellent agreement with structurally characterized complex [(η(5)-C(5)H(5))(CO)(2)Fe(Ga(t)Bu(2))]. The Pauling bond order of the optimized structures shows that the M-Ga bonds in these complexes are nearly M-Ga single bond. Upon going from M = Fe to M = Os, the calculated M-Ga bond distance increases, while on substitution of the CO ligand by PMe(3), the calculated M-Ga bond distances decrease. The π-bonding component of the total orbital contribution is significantly smaller than that of σ-bonding. Thus, in these complexes the GaX(2) ligand behaves predominantly as a σ-donor. The contributions of the electrostatic interaction terms ΔE(elstat) are significantly smaller in all gallyl complexes than the covalent bonding ΔE(orb) term. The absolute values of the ΔE(Pauli), ΔE(int), and ΔE(elstat) contributions to the M-Ga bonds increases in both sets of complexes via the order Fe < Ru < Os. The Ga-C(CO) and Ga-P bond distances are smaller than the sum of van der Waal radii and, thus, suggest the presence of weak intermolecular Ga-C(CO) and Ga-P interactions.     

Application of electron-transfer chain catalysis: preparation of bridged 〚{(η5-C5H5)Fe(CO)2}2(μ-diphosphine)2+〛 complexes without chelated 〚(η5-C5H5)Fe(CO)(η2-diphosphine)+〛 byproducts

The ligand substitution by diphosphine L–L on (η⁵-C₅H₅)Fe(CO)₂I usually results in the chelated 〚(η⁵-C₅H₅)Fe(CO)(η²-L–L)⁺〛〚I^–〛 product exclusively. One could suppress the chelated complexes and selectively prepare the bridged 〚{(η⁵-C₅H₅)Fe(CO)₂}₂(μ-L–L)²⁺〛 complexes by application of the electron-transfer chain catalysis with a chemical initiation. Introducing a catalytic amount of reductant at low temperature to the mixture of 2:1 (η⁵-C₅H₅)Fe(CO)₂I/L–L in THF selectively produces the bridged complexes in 78–93% isolated yields where L–L is Ph₂P(CH₂)_nPPh₂, n = 1–4, or (η⁵-C₅H₄PPh₂)₂Fe.     

Iodine and cymantrenyl regioselective exchange in the η5-IC5H4(CO)2Fe-η1,η5-C5H4Mn(CO)3 complex under cross-coupling conditions

The reaction of ⁵-IC₅H₄(CO)₂Fe-¹,⁵-C₅H₄Mn(CO)₃ with Me₃SiCCSiMe₃ (2 : 1) in the presence of Pd(MeCN)₂Cl₂ afforded the I(CO)₂Fe(C₅H₄—C₅H₄)Mn(CO)₃ complex generated through migrations of the I atom from the Cp ring to the Fe atom and of the C₅H₄Mn(CO)₃ group from the Fe atom to the Cp ring.     

Comparative studies of the photochemical and thermal reactivities of the molybdenum-molybdenum single bond in [Mo2(η5-C5H5)2(CO)6] and triple bond in [Mo2(η5-C5H5)2(CO)4] towards nitrite and nitrate

Irradiation at λ = 507 and 391 nm of [Mo₂(η⁵-C₅H₅)₂(CO)₆] in a degassed tetrahydrofuran (THF) or THF-MeOH solution containing nitrite gives [Mo(η⁵-C₅H₅)₂NO] and several oxo complexes including [{Mo(η⁵-C₅H₅)(O)₂}₂O] in good yields. The quantum yields for the disappearance of [Mo₂(η⁵-C₅H₅)₂(CO)₆] in the reaction with NO₂⁻ depend on the nitrite concentration, thus suggesting participation of the metal-radical intermediate in the reduction of nitrite. Reactions of [Mo₂(η⁵-C₅H₅)₂(CO)₄] with nitrite or nitrate in the dark give the same nitrosyl and oxo complexes as above. An oxygen atom in nitrite or nitrate is mainly transferred onto the molybdenum atom both in the photochemical and the dark reactions.     

Electron density distribution in vanadocene (η5-C5H5)2V and mixed metallocenes (η5-C5H5)M(η5-C7H7) (M = Ti,V, or Cr) and (η5-C5H5)Ti(η8-C8H8). Effect of the nature of the cyclic ligand on the character of the M--(π-ligand) bond

The electron density distribution and atomic displacements were analyzed based on the results of precision low-temperature X-ray diffraction studies of a series of isostructural (Pnma, Z = 4) mixed metallocenes (⁵-C₅H₅)M(⁵-C₇H₇) (M = Ti, V, or Cr) and (⁵-C₅H₅)Ti(⁸-C₈H₈). The barriers to rotation of the cyclic ligands were evaluated based on rms libration amplitudes. Analysis of the deformation electron density demonstrated that the character of the M--(-ligand) chemical bond depends substantially both on the nature of the metal atom and the size of the ligand. Lowering of the local symmetry of the (⁵-C₅H₅)M(⁵-C₇H₇) complexes to C_S leads to distortion of the cylindrical symmetry of the electron density distribution observed in vanadocene (⁵-C₅H₅)₂V and titanocene (⁵-C₅H₅)Ti(⁸-C₈H₈).     

The reactions of AgI electrophile with [Fe2(η-C5H5)2(CO)2(L){CN(Me)H}]+ and [Fe2(η-C5H5)2(CO)2{CN(Me)H}2]2+ salts (L = CO or CNMe)

The protonated species [Fe₂(η-C₅H₅)₂(CO)₂(η-CO){μ-CN(Me)H}]X, [Fe₂(η-C₅H₅)₂(CO)(CNMe)(μ-CO){μ-CN(Me)H}][X], and [Fe₂(η-C₅H₅)₂(CO)₂{η-CN(Me)H}₂][X]₂ react with one equivalent of AgY. The Ag⁺ and one H⁺ act together as a two-electron oxidant. Silver metal is precipitated quantitatively and the substrates cleaved to give mono-nuclear products of the type (a) [Fe(η-C₅H₅)(CO)(L)X] and [Fe(η-C₅H₅(CO)(L)Y] or (b) Fe(η-C₅H₅(CO)(L)(CNMe)][X] (L = CO, CNMe). If X⁻ and Y⁻ are both coordinating anions such as NO₃⁻, I⁻, or Br⁻ or the solvent is MeCN products of type (a) are usually obtained with X = Y = MeCN⁺ if acetonitrile is used as the solvent. However, if either X⁻ or Y⁻ is a non-coordinating anion such as BF₄⁻ or PF₆⁻ and methanol is the solvent, the products are usually those of type (b). When X⁻ = [p-MeC₆H₄SO₃]⁻, both types of products are obtained in significant amounts. If two equivalents of Ph₃P are added to the methanol solution of [Fe₂(η-C₅H₅)₂(CO)₂{-CN(Me)H}₂[BF₆]₂, no reaction takes place until the third equivalent of AgNO₃ has been added. The products have been isolated and characterized by analysis and infrared spectroscopy. The previously unreported [Fe₂(η-C₅H₅)₂(CO)(CNMe)(η-CO){η-CN(Me)H}] X salts are described for X⁻ = BF₄⁻, PF₆⁻, Br⁻ · 2H₂O, I⁻ · H₂O, NO₃⁻ · 0.5H₂O, and p-MeC₆H⁴SO₃⁻.     

Triphospha-Ferrocenes as Ligands. Crystal Structures of [Fe(η5-C5Me5)(η5-C2 TBu2P3)M(CO)5)], (M= Cr,MO, W) and the Novel ruthenium and Nickel Complexes [Fe(η5-C5Me5) (η5-C2 TBu2P3)Ru3(CO)9] and [Fe(η5-C5Me5)(η5-C2 tBu2P3)Ni(Co)2]2

Abstract

Syntheses and structures of penta- and hexaphosphorus analogues of ferrocene have been described recently¹. Unlike their simple ferrocene analogues, these complexes have further ligating potential towards other transition metal centres by virtue of the availability of the ring phosphorus lone-pair electrons that are not involved in the η⁵-coordination. We now describe the first examples of coordination compounds of the triphospha-ferrocene [Fe(η⁵-C₅Me₅) (η⁵-C₂ ^tBu₂P₃]. In the ruthenium complex [Fe(η⁵-C₅Me₅)(η⁵-C₂ ^tBu₂P₃) Ru₃(CO)₉] ² two adjacent phosphorus atoms of the η⁵-C₂ ^tBu₂P₃ ring are interlinked by a ruthenium carbonyl cluster in which all three ruthenium atoms interact with the phosphorus atoms. The tetrametallic nickel complex [Fe(η⁵-C₅Me₅)(η⁵-C₂ ^tBu₂P₃)Ni(CO)₂]₂ ³ represents the first example of intermolecular interlinkage of two phospha-ferrocene systems by two metal centres.     

A mild,phosphine-assisted synthesis of (η-C5Me5)Ta(CO)4. Isolation and crystal structure of intermediate (η-C5Me5)TaCl2(CO)2(PMe3)

Mild, reductive carbonylation of (C₅Me₅)TaCl₄ in the presence of trimethylphosphine gives (C₅Me₅)Ta(CO)₄ in 47% yield. The intermediate (C₅Me₅)TaCl₂- (CO)₂(PMe₃) has been isolated from the reaction of (C₅Me₅)TaCl₂(PMe₃)₂ with carbon monoxide and its crystal structure determined (space group P2₁2₁2₁).