Imaging of uranium on rat brain sections using laser ablation inductively coupled plasma mass spectrometry: a new tool for the study of critical substructures affined to heavy metals in tissues

The specific toxicity of trace metals and compounds largely depends on their bioavailability in different organs or compartments of the organism considered. Imaging mass spectrometry (IMS) using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) with a spatial resolution in the 100 microm range was developed and employed to study heavy metal distribution in brain tissues for toxicological screening. Rat brain post-mortem tissues were stained in an aqueous solution of either uranium or neodymium (metal concentration 100 microg g(-1)) for 3 h. The incubation of heavy metal in thin slices of brain tissue is followed by an imaging mass spectrometric LA-ICP-MS technique. Stained rat brain tissue (thickness 30 microm) were scanned with a focused laser beam (wavelength 266 nm, diameter of laser crater 100 microm and laser power density 3 x 10(9) W cm(-2)). The ion intensities of (235)U(+), (238)U(+), (145)Nd(+) and (146)Nd(+) were measured by LA-ICP-MS within the ablated area. For quantification purposes, matrix-matched laboratory standards were prepared by dosing each analyte to the pieces of homogenized brain tissue. Imaging LA-ICP-MS allows structures of interest to be identified and the relevant dose range to be estimated. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Biomonitoring of metal contamination in a marine prosobranch snail (Nassarius reticulatus) by imaging laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS)

An imaging mass spectrometric method using laser ablation inductively coupled plasma spectrometry (LA-ICP-MS) was developed to determine Cu, Zn, Cd, Hg and Pb and metal distribution in longitudinal tissue sections of the marine snail Nassarius reticulatus (Gastropoda, Prosobranchia). Snails were sampled in northern Brittany (France) at three stations with different contamination levels.The quantification of metal distribution (imaging or mapping) in a thin slice of the snail tissue was carried out using different strategies: by one-point calibration and via matrix-matched laboratory standards using different biological materials (BCR 278, snail tissue, and rat brain). Together with the imaging of metals the distribution of two non-metals (carbon and sulfur) was analyzed. The imaging LA-ICP-MS analysis yielded an inhomogeneous distribution for all elements investigated. The detection limits for the distribution analysis of Cu, Zn, Cd, Hg and Pb measured by LA-ICP-MS were in the low μg g⁻¹ range.     

Cerebral bioimaging of Cu, Fe, Zn, and Mn in the MPTP mouse model of Parkinson’s disease using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS)

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been established as a powerful technique for the determination of metal and nonmetal distributions within biological systems with high sensitivity. An imaging LA-ICP-MS technique for Fe, Cu, Zn, and Mn was developed to produce large series of quantitative element maps in native brain sections of mice subchronically intoxicated with 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridin (MPTP) as a model of Parkinson’s disease. Images were calibrated using matrix-matched laboratory standards. A software solution allowing a precise delineation of anatomical structures was implemented. Coronal brain sections were analyzed crossing the striatum and the substantia nigra, respectively. Animals sacrificed 2 h, 7 d, or 28 d after the last MPTP injection and controls were investigated.     

Quantitative imaging of zinc, copper and lead in three distinct regions of the human brain by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used to determine the distribution of the trace elements zinc, copper and lead in insular, central and hippocampal areas of thin tissue sections (thickness 20microm) through an entire human brain hemisphere. For the investigation of the tissue samples, a commercial laser ablation system was coupled to a double-focusing sector field ICP-MS. The regions of interest of healthy brain tissue (thickness 20microm) were scanned (raster area approximately 200mm(2)) with a focused laser beam (wavelength 266nm, diameter of laser crater 200microm and laser power density 3x10(9)Wcm(-2)). The ion intensities of (64)Zn(+), (63)Cu(+) and (208)Pb(+) were measured by LA-ICP-MS within the ablated area. For quantification purposes, matrix-matched laboratory standards were prepared by means of dosing of each analyte to the pieces of brain tissue. The mass spectrometric analysis yielded inhomogeneous and largely reciprocal distributions of Zn and Cu in the selected areas of investigated brain samples. The highest concentrations of Zn and Cu with the most distinct distribution pattern were found in the hippocampus (up to 15microg g(-1)). In contrast to zinc and copper, for lead, a more homogeneous distribution throughout all regions examined was found at a low concentration (in the ngg(-1) range) level within the analytical range of LA-ICP-MS.     

Evaluation of serum metal profile in relation to biri smoking using ICP-MS

The metals intake through tobacco smoking is associated with adverse effects for human health. The present study was aimed to understand the effects of biri smoking on smoker’s serum metal profile. Seven metals, cadmium (Cd), nickel (Ni), lead (Pb), chromium (Cr), copper (Cu), iron (Fe) and zinc (Zn), were analysed in serum samples of 20 biri smokers and 20 non-smokers from North India. The Cd, Ni, Pb, Cr and Cu concentrations were higher while Fe and Zn concentrations were lower in smokers compared to non-smokers. The Fe concentrations, the highest among all metals, seemed to be unassociated with the smoking activity. This study indicated that biri smoking is a contributor to the body burden of Cd, Ni, Cu and Cr in the smoker’s body. The Cd, Ni, Cu and Fe concentrations are non-significantly associated with the age of smokers at p < 0.01 significance level, whereas Pb and Cr concentrations increase and Zn concentrations decrease with the increase in the age of smokers. Serum metal concentrations in the smoker subjects of North India are higher compared to the results of other similar studies. This could be linked to the poor quality of tobacco used in biri. We recommend conducting more detailed and controlled studies in this regard as a smoker is also subjected to other sources of exposure to metals.     

Determination of differential heavy metal and trace element accumulation in liver, gills, intestine and muscle of sterlet (Acipenser ruthenus) from the Danube River in Serbia by ICP-OES

The accumulation of heavy metals in fish has been extensively studied and well documented. However, the research has been mainly focused on the muscle tissue, while the distribution patterns among other tissues, such as liver and gills, have been mostly neglected. Within the present study, the concentrations of Ag, Al, As, B, Ba, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Se, Sr, Zn and Li in the muscle, gills, liver and intestine of the sterlet (Acipenser ruthenus) from the Danube River have been assessed by using the inductively-coupled plasma optical spectrometry. The analysis has revealed a high degree of differential accumulation of the studied heavy metals and trace elements in the tissues of the Danube sterlet. Liver appeared to be the main heavy metal storage tissue, while the lowest levels of analyzed metals were found in muscles. Heavy metal concentrations in the muscle were at acceptable levels for human consumption, except partly for cadmium. We conclude that, in order to enable a more efficient control of contaminants in fish products, there is an apparent need to resolve the problem of lack of legal limits for many metals in European legislation.     

Chemosensor properties of 7-hydroxycoumarin substituted cyclotriphosphazenes

The newly synthesized cyclotriphosphazene cored coumarin chemosensors 5, 6, and 7 were successfully characterized by ¹ H NMR, ³¹ P NMR, and MALDI-TOF mass spectrometry. Additionally, the photophysical and metal sensing properties of the targeted compounds were determined by fluorescence spectroscopy in the presence of various metals (Li ⁺ , Na ⁺ , K ⁺ , Cs ⁺ , Mg ²⁺ , Ca ²⁺ , Ba ²⁺ , Cr ³⁺ , Mn ²⁺ , Fe ³⁺ , Co ²⁺ , Al ³⁺ , Hg ⁺ , Cu ²⁺ , Zn ²⁺ , Ag ⁺ , and Cd ²⁺ ) . The fluorescence titration results showed that compounds 5, 6, and 7 could be employed as fluorescent chemosensors for Fe ³⁺ ions with high sensitivity. The complex stoichiometry between final cyclotriphosphazene chemosensors and Fe ³⁺ ions was also determined by Job’s plots.     

Quantitative bioimaging of trace elements in the human lens by LA-ICP-MS

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for the quantitative imaging of Fe, Cu and Zn in cryostat sections of human eye lenses and for depth profiling analysis in bovine lenses. To ensure a tight temperature control throughout the experiments, a new Peltier-cooled laser ablation cell was employed. For quantification purposes, matrix-matched laboratory standards were prepared from a pool of human lenses from eye donors and spiked with standard solutions containing different concentrations of natural abundance Fe, Cu and Zn. A normalisation strategy was also carried out to correct matrix effects, lack of tissue homogeneity and/or instrumental drifts using a thin gold film deposited on the sample surface. Quantitative images of cryo-sections of human eye lenses analysed by LA-ICP-MS revealed a homogeneous distribution of Fe, Cu and Zn in the nuclear region and a slight increase in Fe concentration in the outer cell layer (i.e. lens epithelium) at the anterior pole. These results were assessed also by isotope dilution mass spectrometry, and Fe, Cu and Zn concentrations determined by ID-ICP-MS in digested samples of lenses and lens capsules.

Transformations of metal species in ageing humic hydrocolloids studied by competitive ligand and metal exchange

Transformations of metal species (particularly Al, Ca, Fe, Mg, Mn, Zn) in ageing humic hydrocolloids were studied, applying a competitive ligand and metal exchange approach. For this purpose, metal-containing hydrocolloids, freshly collected from humic-rich German bog lake waters (Hohlohsee (HO), Black Forest; Venner Moor (VM), Muensterland; Arnsberger Wald (AW), Northrhine-Westfalia) and conventionally pre-filtered through 0.45 m membranes, were subjected on-site to an exchange with EDTA and Cu(II) ions, respectively, as a function of time. EDTA complexes gradually formed, metal fractions exchanged by Cu(II) (as well as free Cu(II) concentrations) were operationally discriminated by means of a small time-controlled tangential-flow ultrafiltration unit (nominal cut-off: 1 kDa). Metal and DOM (dissolved organic matter) fractions obtained this way were determined off-site using instrumental methods (AAS, ICP-OES, carbon analyzer). After weeks of storage, the collected hydrocolloids were studied again by this approach. The EDTA availability of colloid-bound metals (particularly Al and Fe) exhibited different ageing trends, dependent on the sample (VM: decrease of Fe availability (98–76%), HO: increase of Fe availability (76–82%)). In contrast, the Cu(II) exchange equilibria of colloid-bound metals revealed merely low availability of Al (16–38%) and Fe (5–11%) towards Cu(II) ions, also dependent on ageing effects. In particular, the conditional copper exchange constants K_ex obtained from the exchange between Cu(II) ions and available metal species (such as Ca, Mg, Mn, Zn) exhibited a strong decrease (by a factor of 2–100) during sample storage, indicating considerable non-equilibria complexation of these metal ions in the original bogwaters studied on-site.     

A novel selective fluorescent chemosensor for Fe 3+ ions based on phthalonitrile dimer: synthesis,analysis, and theoretical studies

Phenyl-4,4-di(3,6-dibutoxyphthalonitrile) ( 3 ) was synthesized by the reaction of 1,4-phenylenebisboronic acid ( 1 ) and 4-bromo-3,6-dibutoxyphthalonitrile ( 2 ), using Suzuki cross-coupling reaction. The newly synthesized compound ( 3 ) was characterized by FT-IR, MALDI-MS, ESI-MS, ¹ H-NMR, ¹³ C-NMR, and ¹³ C-DEPT-135-NMR. The fluorescence property of phenyl-4,4-di(3,6-dibutoxyphthalonitrile) ( 3 ) towards various metal ions was investigated by fluorescence spectroscopy, and it was observed thatthe compound ( 3 ) displayed a significantly ‘turn-off’ response to Fe ³⁺ , which was referred to 1:2 complex formation between ligand ( 3 ) and Fe ³⁺ . The compound was also studied via density functional theory calculations revealing the interaction mechanism of the molecule with Fe ³⁺ ions.     

Bioaccumulation of heavy metals on adapted <Emphasis Type="Italic">Aspergillus foetidus</Emphasis>

The development of the organisms extracellular and intracellular mechanisms for the uptake of heavy metals were conducted by using the natural detoxification strategies of the organism to toxicity. Aspergillus foetidus was used as a test case organism to examine these processes. Aspergillus foetidus was adapted to multi-metals (Al, Co, Cr, Cu, Fe, Mg, Mn, Ni and Zn) by a sequential method for tolerance development. The detoxification strategies of A. foetidus occurred by two mechanisms. The first mechanism is the production of extracellular metabolites that is capable of adsorbing and precipitating the metal ions on the cell surface. The second mechanism for the detoxification of metals is the intracellular binding of heavy metals to thiol containing compounds such as GSH and sequestering these metal–thiol complexes into sub-cellular compartments or vacuoles. These detoxification strategies resulted in adapted organisms with tolerance to multi-heavy metals concentrations and significantly higher metal uptake with adaptation.     

Rational Design of Mesoporous Metals and Related Nanomaterials by a Soft‐Template Approach

We review recent developments in the preparation of mesoporous metals and related metal‐based nanomaterials. Among the many types of mesoporous materials, mesoporous metals hold promise for a wide range of potential applications, such as in electronic devices, magnetic recording media, and metal catalysts, owing to their metallic frameworks. Mesoporous metals with highly ordered networks and narrow pore‐size distributions have traditionally been produced by using mesoporous silica as a hard template. This method involves the formation of an original template followed by deposition of metals within the mesopores and subsequent removal of the template. Another synthetic method is the direct‐template approach from lyotropic liquid crystals (LLCs) made of nonionic surfactants at high concentrations. Direct‐template synthesis creates a novel avenue for the production of mesoporous metals as well as related metal‐based nanomaterials. Many mesoporous metals have been prepared by the chemical or electrochemical reduction of metal salts dissolved in aqueous LLC domains. As a soft template, LLCs are more versatile and therefore more advantageous than hard templates. It is possible to produce various nanostructures (e.g., lamellar, 2D hexagonal (p6mm), and 3D cubic (Ia d)), nanoparticles, and nanotubes simply by controlling the composition of the reaction bath.     

Identification of a nanomolar affinity α-synuclein fibril imaging probe by ultra-high throughput in silico screening

Small molecules that bind with high affinity and specificity to fibrils of the α-synuclein (αS) protein have the potential to serve as positron emission tomography (PET) imaging probes to aid in the diagnosis of Parkinson''s disease and related synucleinopathies. To identify such molecules, we employed an ultra-high throughput in silico screening strategy using idealized pseudo-ligands termed exemplars to identify compounds for experimental binding studies. For the top hit from this screen, we used photo-crosslinking to confirm its binding site and studied the structure–activity relationship of its analogs to develop multiple molecules with nanomolar affinity for αS fibrils and moderate specificity for αS over Aβ fibrils. Lastly, we demonstrated the potential of the lead analog as an imaging probe by measuring binding to αS-enriched homogenates from mouse brain tissue using a radiolabeled analog of the identified molecule. This study demonstrates the validity of our powerful new approach to the discovery of PET probes for challenging molecular targets.     

Evaluation of heavy metal and elemental composition of particles in suspended matter of the Upper Course of the Lerma River

The metal distribution of Cr, Mn, Fe, Cu, Zn, and Pb, and the elemental composition, morphology and relative abundance of particles have been evaluated in suspended matter of the Upper Course of the Lerma River in Mexico. The metal concentrations in the suspended matter decrease in the sequence: Fe > Mn > Zn > Cu = Cr > Pb. The Fe and Mn concentrations in the suspended matter are produced principally by natural contributions whereas the Cu, Zn, Cr, and Pb concentrations are produced principally by anthropogenic contributions. In general, the particle groups decrease in the following sequence: aluminosilicate > silica > sulphur > metals > calcium > manganese > iron > calcium carbonate.     

Extraction of metal ions with a primary amine

This paper describes some experimental results obtained at the extraction of sulfate solutions of U(VI), Mo(VI), V(V), Ce(IV), Zr(IV), Fe(III), Al(III) with a benzene solution of Primene JMT. The aqueous solutions consist of metal sulfates (or other metal salts) in the presence of sulfuric acid with a concentration range of 0–2.1 mol·dm^–3, the concentration of amine in the organic phase being 0.1–0.3 mol·dm^–3. The presence of various species of metal ions in the aqueous phase is considered and the equilibrium concentration of substances extracted in the organic phase is determined. On the basis of the results of chemical analysis (concentration of metals and sulfate ions) the composition of the prevailing complexes in the organic phase is proposed.     

Laser ablation inductively coupled plasma mass spectrometry for imaging of copper, zinc, and platinum in thin sections of a kidney from a mouse treated with cis-platin

Platinum complexes are used for the treatment of several types of cancer. High platinum concentrations in the target tissue and low concentrations in dose-limiting tissue structures such as renal tubules are desirable to assure selective toxicity. Microlocal analysis of platinum distribution in tissue sections may thus contribute to the optimization of platinum therapy. Scanning laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used to produce images of element distribution in 14-μm thin sections of kidney tissue from a mouse treated with cis-platin 60 min prior to victimization. The sample surface was scanned (raster area 300 mm²) with a focused laser beam (wavelength 266 nm, diameter of laser crater 50 μm, inter line distance 50 μm and laser power density 3 × 10⁹ W cm⁻²) in a cooled laser ablation chamber (about −15 °C) developed for these measurements. The laser ablation system was coupled to a double-focusing sector field ICP-MS. Ion intensities of ⁶³Cu⁺, ⁶⁴Zn⁺, and ¹⁹⁶Pt⁺ were measured within the tissue by LA-ICP-MS. Matrix-matched laboratory standards served for calibration of analytical data. The mass spectrometric analysis yielded an inhomogeneous distribution for Cu, Zn, and Pt in thin kidney sections. Copper was enriched in the capsule and outer cortex, zinc in the inner cortex and the platinum concentration followed a centripetal gradient with clear medullar enrichment. Thus, scanning LA-ICP-MS may be a useful tool in the preclinical development of new and less nephrotoxic platinum complexes.     

Nuclear resonance vibrational spectroscopy reveals the FeS cluster composition and active site vibrational properties of an O2-tolerant NAD+-reducing [NiFe] hydrogenase

Hydrogenases are complex metalloenzymes that catalyze the reversible splitting of molecular hydrogen into protons and electrons essentially without overpotential. The NAD⁺-reducing soluble hydrogenase (SH) from Ralstonia eutropha is capable of H₂ conversion even in the presence of usually toxic dioxygen. The molecular details of the underlying reactions are largely unknown, mainly because of limited knowledge of the structure and function of the various metal cofactors present in the enzyme. Here, all iron-containing cofactors of the SH were investigated by ⁵⁷Fe specific nuclear resonance vibrational spectroscopy (NRVS). Our data provide experimental evidence for one [2Fe2S] center and four [4Fe4S] clusters, which is consistent with the amino acid sequence composition. Only the [2Fe2S] cluster and one of the four [4Fe4S] clusters were reduced upon incubation of the SH with NADH. This finding explains the discrepancy between the large number of FeS clusters and the small amount of FeS cluster-related signals as detected by electron paramagnetic resonance spectroscopic analysis of several NAD⁺-reducing hydrogenases. For the first time, Fe–CO and Fe–CN modes derived from the [NiFe] active site could be distinguished by NRVS through selective ¹³C labeling of the CO ligand. This strategy also revealed the molecular coordinates that dominate the individual Fe–CO modes. The present approach explores the complex vibrational signature of the Fe–S clusters and the hydrogenase active site, thereby showing that NRVS represents a powerful tool for the elucidation of complex biocatalysts containing multiple cofactors.     

Normal values for chromium (Cr) and nickel (Ni) in human pulmonary tissue

Summary Especially some relatively insoluble nickel (Ni)-compounds as well as certain chromates may be able to induce cancer in the regions of the lungs, the nose and the paranasal sinuses after occupational exposure. Recent investigations have shown that these metals can cumulate in the lung tissue after inhalation. So the evaluation of normal values is an important precondition for appraisal of Cr and Ni accumulation in lung tissue. In 30 random autopsies, nickel and chromium were determined quantitatively by atomic absorption spectrometry (AAS) in human lung tissue to evaluate normal values. None of the deceased persons had an occupational exposure to Cr and Ni or their compounds. The samples were taken from different segments and lobes of the lungs, taking topographical anatomical criteria into consideration. From the results of 495 tissue samples median chromium concentrations between 742 and 1375 ng/g were calculated, with median nickel concentrations of 107–195 ng/g (dry weight). Concentrations of Cr and Ni were 1.3–1.9 times higher in the upper lung areas. So the results showed substantial variation both within a single lung and also between individuals. In view of the variability in metal concentrations, analysis of only one part of lung tissue is not representative.     

Comparative imaging of P,S, Fe,Cu, Zn and C in thin sections of rat brain tumor as well as control tissues by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for quantitative imaging of selected elements (P, S, Fe, Cu, Zn and C) in thin sections of rat brain samples (thickness 20 μm). The sample surface was scanned (raster area ~ 2 cm²) with a focused laser beam (wavelength 266 nm, diameter of laser crater 50 μm, and irradiance 1 × 10⁹ W cm^− 2). The laser ablation system was coupled to a double-focusing sector field. The possibility was evaluated of using carbon (via measurement of ¹³C⁺) as an internal standard element for imaging element distribution as part of this method. The LA-ICP-MS images obtained for P, S, Fe Cu and Zn were quantified using synthetically prepared matrix-matched laboratory standards. Depending on the sample analyzed, concentrations of Cu and Zn in the control tissue were found to be in the range of 8–10 μg g^− 1 and 10–12 μg g^− 1, while in the tumor tissue these concentrations were in the range of 12–15 μg g^− 1 and 15–17 μg g^− 1, respectively. The measurements of P, S and Fe distribution revealed the depletion of these elements in tumor tissue. In all the samples, the shape of the tumor could be clearly distinguished from the surrounding healthy tissue by the depletion in carbon. Additional experiments were performed in order to study the influence of the water content of the analyzed tissue on the intensity signal of the analyte. The results of these measurements show the linear correlation (R² = 0.9604) between the intensity of analyte and amount of water in the sample. The growth of a brain tumor was thus studied for the first time by imaging mass spectrometry.     

Use of atomic absorption spectrometry for the determination of metals in sediments in south-west Louisiana

The relatively recent introduction of atomic absorption spectrometry has produced a rapid and relatively inexpensive method for the determination of metal concentrations in a wide variety of samples. One such application is in the determination of metal concentrations in soils and sediments. Soils and sediments represent concentrated reservoirs for these metals that serve as sinks for introduced trace metals or can become environmental sources. The coastal zone of Louisiana provides a ‘living laboratory’ to investigate the mechanisms of transport, deposition, and dissolution of trace metals into this fragile environment. Investigations done in the coastal zone have found trace metals tend to concentrate near pollution inputs and sources and have not migrated to or significantly impacted the coastal zone of Louisiana. Common trace metals determined and their range of concentrations in coastal soil and sediments are chromium (10–30 ppm), copper (10–25 ppm), iron (0.6–2.1%), manganese (200–600 ppm), nickel (6–20 ppm), lead (8–20 ppm), and zinc (30–55 ppm).