Realizing high hydrogen evolution activity under visible light using narrow band gap organic photocatalysts

The design and synthesis of conjugated semiconducting polymers for photocatalytic hydrogen evolution have engendered intense recent interest. However, most reported organic polymer photocatalysts show a relatively broad band gap with weak light absorption ability in the visible light region, which commonly leads to a low photocatalytic activity under visible light. Herein, we synthesize three novel dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide (DTDO) containing conjugated polymer photocatalysts by a facile C–H arylation coupling polymerization reaction. The resulting polymers show a broad visible light absorption range up to 700 nm and a narrow band gap down to 1.81 eV due to the introduction of the DTDO unit. Benefiting from the donor–acceptor polymer structure and the high content of the DTDO unit, the three-dimensional polymer PyDTDO-3 without the addition of a Pt co-catalyst shows an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation, which is much higher than that of most reported organic polymer photocatalysts under visible light.

Narrow band gap conjugated polymer photocatalysts containing dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide show an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation.     

Characterizing chain processes in visible light photoredox catalysis

The recognition that Ru(bpy)₃²⁺ and similar visible light absorbing transition metal complexes can be photocatalysts for a variety of synthetically useful organic reactions has resulted in a recent resurgence of interest in photoredox catalysis. However, many of the critical mechanistic aspects of this class of reactions remain poorly understood. In particular, the degree to which visible light photoredox reactions involve radical chain processes has been a point of some disagreement that has not been subjected to systematic analysis. We have now performed quantum yield measurements to demonstrate that three representative, mechanistically distinct photoredox processes involve product-forming chain reactions. Moreover, we show that the combination of quantum yield and luminescence quenching experiments provides a rapid method to estimate the length of these chains. Together, these measurements constitute a robust, operationally facile strategy for characterizing chain processes in a wide range of visible light photoredox reactions.     

Rare earth oxides in zirconium dioxide:How to turn a wide band gap metal oxide into a visible light active photocatalyst

In the present study, we investigated the effect of cerium and erbium doping of the zirconium dioxide matrix. We synthesized doped samples using hydrothermal process. The amounts of dopant used were 0.5%, 1% and 5% molar(rare earth oxide over zirconium dioxide) respectively. The samples have been studied via X-ray Diffraction measurements for the structural characterization. UV visible diffuse reflectance was used for the optical analysis, Brunauer-Emmett-Teller(BET) model for the measurement of the surface area. Finally the samples have been analysed via electron paramagnetic resonance(EPR) for the electronic characterization. Then we tested the new synthetized materials to determine their photocatalytic activity in the reaction of degradation of methylene blue performed under irradiation by diodes(LEDs) emitting exclusively visible light.     

In vivo visible light-triggered drug release from an implanted depot

Controlling chemistry in space and time has offered scientists and engineers powerful tools for research and technology. For example, on-demand photo-triggered activation of neurotransmitters has revolutionized neuroscience. Non-invasive control of the availability of bioactive molecules in living organisms will undoubtedly lead to major advances; however, this requires the development of photosystems that efficiently respond to regions of the electromagnetic spectrum that innocuously penetrate tissue. To this end, we have developed a polymer that photochemically degrades upon absorption of one photon of visible light and demonstrated its potential for medical applications. Particles formulated from this polymer release molecular cargo in vitro and in vivo upon irradiation with blue visible light through a photoexpansile swelling mechanism.     

Conducting polyfurans by electropolymerization of oligofurans

Polyfurans have never been established as useful conjugated polymers, as previously they were considered to be inherently unstable and poorly conductive. Here, we show the preparation of stable and conducting polyfuran films by electropolymerization of a series of oligofurans of different chain lengths substituted with alkyl groups. The polyfuran films show good conductivity in the order of 1 S cm^–1, good environmental and electrochemical stabilities, very smooth morphologies (roughness 1–5 nm), long effective conjugation lengths, well-defined spectroelectrochemistry and electro-optical switching (in the Vis-NIR region), and have optical band-gaps in the range of 2.2–2.3 eV. A low oxidation potential needed for polymerization of oligofurans (compared to furan) is a key factor in achievement of improved properties of polyfurans reported in this work. DFT calculations and experiments show that polyfurans are much more rigid than polythiophenes, and alkyl substitution does not disturb backbone planarity and conjugation. The obtained properties of polyfuran films are similar or superior to the properties of electrochemically prepared poly(oligothiophene)s under similar conditions.     

Structural defects cause TiO2-based photocatalysts to be active in visible light

Oxidation of TiO or Ti2O3 led to the formation of TiO2 with activity in visible light much higher than when TiN was used as a precursor, pointing out the importance of oxygen defects/vacancies for extension of activity of TiO2 into the visible region.     

Biosynthetic insights provided by unusual sesterterpenes from the medicinal herb Aletris farinosa

A series of novel sesterterpenes (2–6) have been isolated from the roots of Aletris farinosa and structurally characterized by MS, NMR, and X-ray crystallography in conjunction with computational modeling. Their structures provide new insights into the mechanisms of sesterterpene biosynthesis. Specifically, we propose with support from density functional theory computations that the configuration at a single stereocenter determines the fate of a key tetracyclic carbocationic intermediate, derived from an oxidogeranylfarnesol precursor. Whereas one epimer of the carbocation undergoes H⁺ elimination to give 6, the other undergoes a spectacular cascade of seven 1,2-methyl and hydride migrations leading to the previously unreported carbon skeleton of 5. Theoretical calculations suggest that the cascade is triggered by substrate preorganization in the enzyme active site.     

Fluorine teams up with water to restore inhibitor activity to mutant BPTI

Introducing fluorine into molecules has a wide range of effects on their physicochemical properties, often desirable but in most cases unpredictable. The fluorine atom imparts the C–F bond with low polarizability and high polarity, and significantly affects the behavior of neighboring functional groups, in a covalent or noncovalent manner. Here, we report that fluorine, present in the form of a single fluoroalkyl amino acid side chain in the P1 position of the well-characterized serine-protease inhibitor BPTI, can fully restore inhibitor activity to a mutant that contains the corresponding hydrocarbon side chain at the same site. High resolution crystal structures were obtained for four BPTI variants in complex with bovine β-trypsin, revealing changes in the stoichiometry and dynamics of water molecules in the S1 subsite. These results demonstrate that the introduction of fluorine into a protein environment can result in “chemical complementation” that has a significantly favorable impact on protein–protein interactions.     

Photochromic hybrid materials of cucurbituril and polyoxometalates as photocatalysts under visible light

Two isostructural organic-inorganic hybrid solid materials based on cucurbituril derivatives and polyoxometalates, {[K(2)(H(2)O)(2)Na(2)(H(2)O)(2)Na(2)(H(2)O)(6)](P(2)W(18)O(62))(Me(10)Q(5))(2)}·~7H(2)O (1) and {[Rb(2)(H(2)O)(2)Na(2)(H(2)O)Na(2)(H(2)O)(4)](P(2)W(18)O(62))(Me(10)Q(5))(2)}·~8H(2)O (2), which exhibit reversible photochromic properties as well as excellent photocatalytic activities toward the degradation of methyl orange (MO) and rhodamine-B (RB) under visible light irradiation, are reported.     

Synthesis of graphitic carbon nitride-based photocatalysts for hydrogen evolution under visible light

1. Download : Download high-res image (141KB)
2. Download : Download full-size image

     

Electronic coupling in iron oxide-modified TiO2 leads to a reduced band gap and charge separation for visible light active photocatalysis

In recent experiments Tada et al. have shown that TiO(2) surfaces modified with iron oxide display visible light photocatalytic activity. This paper presents first principles simulations of iron oxide clusters adsorbed at the rutile TiO(2) (110) surface to elucidate the origin of the visible light photocatalytic activity of iron oxide modified TiO(2). Small iron oxide clusters adsorb at rutile (110) surface and their presence shifts the valence band so that the band gap of the composite is narrowed towards the visible, thus confirming the origin of the visible light activity of this composite material. The presence of iron oxide at the TiO(2) surface leads to charge separation, which is the origin of enhanced photocatalytic efficiency, consistent with experimental photoluminesence and photocurrent data. Surface modification of a metal oxide is thus an interesting route in the development of visible light photocatalytic materials.     

CQDs/TNS复合光催化剂的制备及其可见光催化活性

以明胶为原料用水热法一步合成了碳量子点(CQDs),经过聚乙二醇表面修饰后,在乙醇溶液中与二氧化钛纳米片(TNS)复合形成了碳量子点高分散负载的CQDs/TNS复合光催化剂.对复合光催化剂进行了XRD、FT-IR、HRTEM和XPS表征,结果表明合成的碳量子点的平均粒径为4nm且具有较好的荧光性能.与纯TNS相比,CQDs/TNS复合光催化剂在可见光下对罗丹明B表现出很好的光催化降解活性.当CQDs/TNS复合光催化剂中CQDs含量为7.5%时光催化活性最好,并且在3次循环降解后活性仍保持不变.其优异的光催化活性来自于碳量子点的独特上转换荧光性能和二氧化钛纳米片高活性{001}晶面的共同作用.     

Tetraphenylpyrazine-based AIEgens: facile preparation and tunable light emission

Research on aggregation-induced emission (AIE) has been a hot topic. Due to enthusiastic efforts by many researchers, hundreds of AIE luminogens (AIEgens) have been generated which were mainly based on archetypal silole, tetraphenylethene, distyrylanthracene, triphenylethene, and tetraphenyl-1,4-butadiene, etc. To enlarge the family of AIEgens and to enrich their functions, new AIEgens are in high demand. In this work, we report a new kind of AIEgen based on tetraphenylpyrazine (TPP), which could be readily prepared under mild reaction conditions. Furthermore, we show that the TPP derivatives possess a good thermal stability and their emission could be fine-tuned by varying the substituents on their phenyl rings. It is anticipated that TPP derivatives could serve as a new type of widely utilized AIEgen, based on their facile preparation, good thermo-, photo- and chemostabilities, and efficient emission.     

N-Heterocyclic carbene catalysed redox isomerisation of esters to functionalised benzaldehydes

N-Heterocyclic carbene catalysed redox isomerisation with reduction about the carbonyl has been developed in the transformation of trienyl esters to tetrasubstituted benzaldehydes. The reaction proceeds in good to excellent yield, and in cases that provide 2,2′-biaryls, enantioselectivity is observed. Mechanistic studies demonstrate the intermediacy of a cyclohexenyl β-lactone, while implicating formation of the homoenolate as turnover limiting.     

Selective visible light reduction of carbon dioxide over iridium(III)-terpyridine photocatalysts

The CO₂ reduction reaction is an imperative piece of technology that closes the carbon cycle in many critical energy conversion and chemical manufacturing processes. Here, we report two new iridium (III) terpyridine-based photocatalysts capable of selective reduction of CO₂ to CO under visible light (λ ≥ 420 nm). The first photocatalyst, [Ir–COOH], was functionalized with the carboxyl group on the phenylpyridine, whereas the second, [Ir-PhCOOH], was attached to a phenyl spacer on the terpyridine. The [Ir-PhCOOH] was characterized by a higher extinction coefficient than [Ir–COOH], thus allowing more absorption of photons. Although both photocatalysts require two-electron activation, the [Ir-PhCOOH] is more readily activated as a result of the more negatively charged Ir center. These photocatalysts show exclusive selectivities in the production of CO. The turnover frequencies for [Ir–COOH] and [Ir-PhCOOH] were 19 and 10 h^?1, respectively, under visible light irradiation. The e-e-H-H pathway was identified as the most favorable, consisting of the rate-limiting step in the conversion of 1COOH to 1CO, and where the barrier is significantly lower for [Ir-PhCOOH] than for [Ir–COOH].     

A series of highly efficient photocatalysts for organic contaminants degradation under visible light irradiation

Antimonic acid and N-doped antimonic acid, solid acids with d(10) electron configuration, are reported as novel photocatalysts for rhodamine B (RhB) degradation under visible light irradiation. They show much higher activities in comparison with P25 and photolysis. However, the extent of degradation abilities for RhB was not consistent with the formation rate of the active ˙OH radicals under visible light irradiation.     

Template- and surfactant-free synthesis of ultrathin CeO2 nanowires in a mixed solvent and their superior adsorption capability for water treatment

Ultrathin CeO₂ nanowires with a diameter of 5 nm and an aspect ratio of more than 100 can be prepared by a one-step refluxing approach in a mixed solvent composed of water and ethanol without using any templates or surfactants. The formation mechanism of the as-synthesized ultrathin nanowires has been investigated. The as-synthesized CeO₂ nanowires with a high surface area of 125.31 m² g^–1 exhibited excellent wastewater treatment performance with high removal capacities towards organic dyes and heavy metal ions. In addition, the as-synthesized CeO₂ nanowires can adsorb Congo red selectively from a mixed solution composed of several dyes. Successful access to high quality ultrathin nanowires will make it possible for their potential application in catalysis and other fields.     

Preparation of the visible light responsive TiO2 thin film photocatalysts by the RF magnetron sputtering deposition method

TiO₂ thin film photocatalysts which could induce photoreactions under visible light irradiation were successfully developed in a single process by applying an ion engineering technique, i.e., the radio frequency (RF) magnetron sputtering deposition method. The TiO₂ thin films prepared at temperatures greater than 773 K showed the efficient absorption of visible light; on the other hand, the TiO₂ thin films prepared at around 573 K were highly transparent. This clearly means that the optical properties of TiO₂ thin films, which absorb not only UV but also visible light, can be controlled by the preparation temperatures of the RF magnetron sputtering deposition method. These visible light responsive TiO₂ thin films were found to exhibit effective photocatalytic reactivity under visible light irradiation (λ > 450 nm) at 275 K for the reductive decomposition of NO into N₂ and N₂O. From various characterizations, the orderly aligned columnar TiO₂ crystals could be observed only for the visible light responsive TiO₂ thin films. This unique structural factor is expected to modify the electronic properties of a TiO₂ semiconductor, enabling the efficient absorption of visible light.