简谐激励下黏弹性非线性能量阱的研究

黏弹性材料作为一种良好的减振材料,广泛应用于机械、航空和土木等领域.本文用黏弹性Maxwell器件代替传统非线性能量阱中的阻尼元件,提出一种新型的黏弹性非线性能量阱,并对该模型在简谐激励下的减振性能进行分析.首先,根据牛顿第二定律建立系统的动力学方程,采用谐波平衡法求解系统的幅频响应曲线,并利用MATLAB中的Runge-Kutta数值方法验证解析解的正确性,结果吻合良好.然后,分析黏弹性非线性能量阱的减振性能和参数的影响.最后,分析了不同质量比下非线性刚度比和阻尼比同时变化时减振效果的变化趋势,并讨论了黏弹性非线性能量阱的最佳取值范围.研究结果表明:主系统的最大振幅随着非线性刚度的增加先减小后增大;当参数选取恰当时,黏弹性非线性能量阱比传统非线性能量阱的减振效果更优;另外,随着质量比的增加,主系统最大振幅的最小值出现先减小后趋于不变的现象,且非线性刚度比和阻尼比的最佳取值范围有所增大.以上结论对黏弹性非线性能量阱的实际应用提供了一定的理论依据.     

FIRST-PASSAGE FAILURE OF PREISACH HYSTERETIC SYSTEMS

The first-passage failure of a single-degree-of-freedom hysteretic system with non- local memory is investigated. The hysteretic behavior is described through a Preisach model with excitation selected as Gaussian white noise. First, the equivalent nonlinear non-hysteretic sys- tem with amplitude-dependent damping and stiffness coefficients is derived through generalized harmonic balance technique. Then, equivalent damping and stiffness coefficients are expressed as functions of system energy by using the relation of amplitude to system energy. The stochastic aver- aging of energy envelope is adopted to accept the averaged It5 stochastic differential equation with respect to system energy. The establishing and solving of the associated backward Kolmogorov equation yields the reliability function and probability density of first-passage time. The effects of system parameters on first-passage failure are investigated concisely and validated through Monte Carlo simulation.     

具有组合非线性阻尼的非线性能量阱振动抑制响应分析

非线性能量阱是一种振动能量吸收装置,其在结构振动抑制中具有十分重要的作用.文章对具有组合非线性阻尼非线性能量阱的系统进行振动抑制相关的分析.首先对具有组合非线性阻尼非线性能量阱的系统进行理论模型的描述,对系统模型的运动方程利用复变量平均法进行推导,得到系统的慢变方程.其次对系统的慢变方程运用多尺度法进行强调制响应的分析,通过对系统进行慢不变流形和相轨迹的研究,描述系统强调制响应发生的条件基础.此外,还利用一维映射对系统进行分析,揭示外激励幅值对强调制响应存在时频率失谐系数取值区间的影响规律.最后利用能量谱、时间响应和庞加莱映射对耦合组合非线性阻尼非线性能量阱系统进行了振动抑制的相关研究,揭示组合非线性阻尼的非线性能量阱不同阻尼比、阻尼和刚度对其振动抑制效果的影响规律,得出组合非线性阻尼非线性能量阱和主结构响应存在一致性的现象,并验证所提出的组合非线性阻尼非线性能量阱模型具有较好的振动抑制能力.     

Stochastic averaging for nonlinear vibration energy harvesting system

A stochastic averaging technique for the nonlinear vibration energy harvesting system to Gaussian white noise excitation is developed to analytically evaluate the mean-square electric voltage and mean output power. By introducing the generalized harmonic transformation, the influence of the external circuit on the mechanical system is equivalent to a quasi-linear stiffness and a quasi-linear damping with energy-dependent coefficients, and then the equivalent nonlinear system with respect to the mechanical states is completely established. The Itô stochastic differential equation with respect to the mechanical energy of the equivalent nonlinear system is derived through the stochastic averaging technique. Solving the associated Fokker–Plank–Kolmogorov equation yields the stationary probability density of the mechanical states, and then the mean-square electric voltage and mean output power are analytically obtained through the approximate relation between the electric quantity and the mechanical states. The agreements between the analytical results and those from the moment method and from Monte Carlo simulations validate the effectiveness of the proposed technique.     

Identification of Nonlinear Oscillator with Parametric White Noise Excitation

An identification technique is proposed for a nonlinear oscillator excited by response-dependent white noise. Stiffness, damping and excitation are estimated from records of the stationary stochastic response. The estimation of the stiffness is based on a nonparametric procedure in which the potential energy at the displacement extremes is obtained from the kinetic energy at the previous mean-level-crossing. A nonparametric estimate is obtained by an iterative averaging, in which the increased knowledge of the potential energy in each step is used to avoid bias. The second step in the procedure is to estimate the stationary probability potential in a nonparametric form from a histogram of the kinetic energy at mean-level-crossings. The damping is also estimated in a nonparametric way from approximate expressions of the covariance functions of a set of modified phase plane variables at a given energy level. Finally, the excitation is estimated from a relation between the stationary probability potential, the damping and the excitation. The separation of damping and excitation requires a parametric representation. The system identification technique is investigated by application to response records obtained by stochastic simulation. The stiffness estimation generally gives excellent results, while the damping and excitation estimation tend to be slightly biased for systems with strongly nonlinear stiffness.     

Nonstationary probability densities of system response of strongly nonlinear single-degree-of-freedom system subject to modulated white noise excitation

The nonstationary probability densities of system response of a single-degree-of -freedom system with lightly nonlinear damping and strongly nonlinear stiffness subject to modulated white noise excitation are studied.Using the stochastic averaging method based on the generalized harmonic functions,the averaged Fokker-Planck-Kolmogorov equation governing the nonstationary probability density of the amplitude is derived. The solution of the equation is approximated by the series expansion in terms of a set...     

Usefulness of passive non-linear energy sinks in controlling galloping vibrations

The suppression of vibration amplitudes of an elastically-mounted square prism subjected to galloping oscillations by using a non-linear energy sink is investigated. The non-linear energy sink consists of a secondary system with linear damping and non-linear stiffness. A representative model that couples the transverse displacement of the square prism and the non-linear energy sink is constructed. A linear analysis is performed to determine the impacts of the non-linear energy sink parameters (mass, damping, and stiffness) on the coupled frequency and onset speed of galloping. It is demonstrated that increasing the damping of the non-linear energy sink can result in a significant increase in the onset speed of galloping. Then, the normal form of the Hopf bifurcation is derived to identify the type of instability and to determine the effects of the non-linear energy sink stiffness on the performance of the aeroelastic system near the bifurcation. The results show that the non-linear energy sink can be efficiently implemented to significantly reduce the galloping amplitude of the square prism. It is also shown that the multiple stable responses of the coupled aeroelastic system are obtained as well as the periodic responses, which are dependent on the considered non-linear energy sink parameters.     

Vibration suppression and higher branch responses of beam with parallel nonlinear energy sinks

The effects of nonlinear energy sink (NES) on vibration suppression of a simply supported beam are investigated in this work. The slow flow equations of the system are derived by using complexification–averaging method, and the validity of the derivation is verified. By comparing the vibration absorption of single and parallel NESs of equal mass, it is found that the latter exhibits superior vibration absorption performance. In addition, the parallel NES can eliminate higher branch responses of the system under the harmonic load. Furthermore, it is found that parallel NES can eliminate the higher branches of the system more effectively by tuning nonlinear stiffness and damping. Moreover, the thermal effect on natural frequencies of the simply supported beam is considered, and the influences of the parallel NES’s parameters on the energy dissipation rate under shock load are investigated. The nonlinear responses of the simply supported beam with parallel NES under harmonic load and with the increase of temperature are described.     

Tuning methods for tuned inerter dampers coupled to nonlinear primary systems

This study develops displacement- and kinetic energy-based tuning methods for the design of the tuned inerter dampers (TIDs) coupled to both linear and nonlinear primary systems. For the linear primary system, the design of the TID is obtained analytically. The steady-state frequency–response relationship of the nonlinear primary system with a softening or hardening stiffness nonlinearity is obtained using the harmonic balance (HB) method. Analytical and numerical tuning approaches based on HB results are proposed for optimal designs of the TID to achieve equal peaks in the response curves of the displacement and the kinetic energy of the primary system. Via the developed approaches, the optimal stiffness of the TID can be obtained according to the stiffness nonlinearity of the primary system and the inertance of the absorber. Unlike the linear primary oscillator case, for a nonlinear primary oscillator the shape of its resonant peaks is mainly affected by the damping ratio of the TID, while the peak values depend more on the stiffness ratio. The proposed designs are shown to be effective in a wide range of stiffness nonlinearities and inertances. This study demonstrates the benefits of using inerters in vibration suppression devices, and the adopted methods are directly applicable for nonlinear systems with different types of nonlinearities.

     

Integration of a nonlinear energy sink and a piezoelectric energy harvester

A mechanical-piezoelectric system is explored to reduce vibration and to harvest energy. The system consists of a piezoelectric device and a nonlinear energy sink(NES), which is a nonlinear oscillator without linear stiffness. The NES-piezoelectric system is attached to a 2-degree-of-freedom primary system subjected to a shock load. This mechanical-piezoelectric system is investigated based on the concepts of the percentages of energy transition and energy transition measure. The strong target energy transfer occurs for some certain transient excitation amplitude and NES nonlinear stiffness. The plots of wavelet transforms are used to indicate that the nonlinear beats initiate energy transitions between the NES-piezoelectric system and the primary system in the transient vibration, and a 1:1 transient resonance capture occurs between two subsystems.The investigation demonstrates that the integrated NES-piezoelectric mechanism can reduce vibration and harvest some vibration energy.     

Optimal design of multi-parametric nonlinear systems using a parametric continuation based Genetic Algorithm approach

In this paper, a procedure for the optimal design of multi-parametric nonlinear systems is presented which makes use of a parametric continuation strategy based on simple shooting method. Shooting method is used to determine the periodic solutions of the nonlinear system and multi-parametric continuation is then employed to trace the change in the system dynamics as the design parameters are varied. The information on the variation of system dynamics with the value of the parameter vector is then used to find out the exact parameter values for which the system attains the required response. This involves a multi-parametric optimisation procedure which is accomplished by the coupling of parameter continuation with different search algorithms. Genetic Algorithm as well as Gradient Search methods are coupled with parametric continuation to develop an optimisation scheme. Furthermore, in the coupling of continuation and Genetic Algorithm, a “norm-minimising” strategy is developed and made use of minimising the use of continuation. The optimisation procedure developed is applied to the Duffing oscillator for the minimisation of the system acceleration with nonlinear stiffness and damping coefficient as the parameters and the results are reported. It is also briefly indicated how the proposed method can be successfully used to tune nonlinear vibration absorbers.     

非线性被动隔振的若干进展

工程中航空航天、船舶与海洋结构物及其上装备和精密仪器易受极端环境干扰和破坏,使得非线性隔振理论在近十年来迅猛发展;针对日益严峻的隔振和抗冲击等要求,工程师和科学家们已发展出各种不同的非线性隔振系统,包括主动、半主动、被动和复合隔振.利用非线性改善的被动隔振兼具传统被动隔振的鲁棒性和主动隔振的高效性成为振动控制领域的先进技术.本文主要综述了非线性隔振理论和应用的近十年进展,包括非线性隔振设计、建模、分析、仿真和实验.在隔振系统的构建中,既考虑了刚度非线性又考虑了阻尼非线性;动力学响应的研究中,既有确定性分析又有随机分析.首先提出了适用于非线性隔振系统改进的评价方式;其次综述了高静态低动态刚度隔振及其加强形式非线性阻尼加强和双层非线性隔振,混沌反控制技术、内共振影响、非线性能量阱应用等振动机制利用型隔振和非线性隔振功能材料.最后,对非线性隔振研究发展的热点和关键性问题进行了分析和展望.     

Effects of a non-linear energy sink (NES) on vortex-induced vibrations of a circular cylinder

We investigate in detail the passive control of vortex-induced vibrations of a freely oscillating circular cylinder using a non-linear energy sink consisting of a secondary system having linear damping and an essential non-linear cubic stiffness. The loads on the cylinder are calculated using a direct numerical simulation of the incompressible flow over the cylinder using a parallel computational fluid dynamics code. A strongly coupled fluid structure control numerical model is used to determine the responses of the cylinder and the sink as well as the flow. We vary the sink parameters (mass and damping) and determine their effects on the response of the coupled system. We find multiple stable responses of the coupled system for different mass ratios and damping coefficient of the sink, depending on the initial conditions.     

Attractors of harmonically forced linear oscillator with attached nonlinear energy sink. II: Optimization of a nonlinear vibration absorber

This paper is the second one in the series of two papers devoted to detailed investigation of the response regimes of a linear oscillator with attached nonlinear energy sink (NES) under harmonic external forcing and assessment of possible application of the NES for vibration absorption and mitigation. In this paper, we study the performance of a strongly nonlinear, damped vibration absorber with relatively small mass attached to a periodically excited linear oscillator. We present a nonlinear absorber tuning procedure in the vicinity of (1:1) resonance which provides the best total system energy suppression, using analytical and numerical tools. A linear absorber is also tuned according to the same criterion of total system energy suppression as the nonlinear one. Both optimally tuned absorbers are compared under common parameters of damping, external forcing but different absorber stiffness characteristics; certain cases for which nonlinear absorber is preferable over the linear one are revealed and confirmed numerically.     

谐波平衡法与复平均法计算强非线性系统稳态响应的区别

近些年,很多学者致力于利用非线性增强振动响应减少的效果或者能量采集器的效率。因而非线性系统的响应值需要从理论计算方面更准确地预测。另外,根据学者已取得的研究成就,非线性能量汇(NES)中存在的立方刚度非线性可以将结构中宽频域的振动能量传递至非线性振子部分。文章将一种由NES和压电能量采集器组成的NES-piezo装置与两自由度主结构耦合连接,系统受谐和激励作用。文章采用谐波平衡法和复平均法分别推导了系统稳态响应,参照数值结果,对比两种近似解析方法在求解强非线性系统稳态响应时的异同。计算结果表明,系统体现较弱非线性时,二者计算结果差异很小;当系统体现强非线性时,复平均法不能准确地呈现系统高阶响应,提高阶数的谐波平衡法能更准确地表示系统响应值。基于谐波平衡法和数值算法,讨论NES-piezo装置对于系统宽频域减振的影响。与仅加入非线性能量汇情况对比,结果表明NES-piezo装置不会恶化宽频域减振效果,并且在第一阶共振频率附近,可以稍微提高结构减振效率。另外,计算结果也表明,采用恰当的NES-piezo装置可实现宽频域范围的结构减振和压电能量采集一体化。此项研究工作为研究不同情形强非线性系统的响应提供了理论方法的指导。另外,研究结果也为宽频域范围的结构减振和压电能量采集一体化提供了理论依据。     

Stochastic bifurcations in a nonlinear tri-stable energy harvester under colored noise

In this paper, the stochastic bifurcations and the performance analysis of a strongly nonlinear tri-stable energy harvesting system with colored noise are investigated. Using the stochastic averaging method, the averaged Fokker–Plank–Kolmogorov equation and the stationary probability density (SPD) of the amplitude are obtained, respectively. Meanwhile, the Monte Carlo simulations are performed to verify the effectiveness of the theoretical results. D-bifurcation is studied through the largest Lyapunov exponent calculations, which implies the system undergoes D-bifurcation twice with increasing the nonlinear stiffness coefficients. The effects of the nonlinear stiffness coefficients, noise intensity and correlation time on P-bifurcation are discussed by the qualitative changes of the SPD. Moreover, the relationship between D- and P-bifurcation is explored. If the strength of stochastic jump has obvious gap with respect to the two statuses before and after the occurrence of P-bifurcation, the D-bifurcation will happen, too. Finally, the performance and the capability of harvesting energy from ambient random excitation are analyzed.     

Limit cycle oscillation suppression of 2-DOF airfoil using nonlinear energy sink

This paper presents a novel mechanical attachment, i.e., nonlinear energy sink （NES）, for suppressing the limit cycle oscillation （LCO） of an airfoil. The dynamic responses of a two-degree-of-freedom （2-DOF） airfoil coupled with an NES are studied with the harmonic balance method. Different structure parameters of the NES, i.e., mass ratio between the NES and airfoil, NES offset, NES damping, and nonlinear stiffness in the NES, are chosen for studying the effect of the LCO suppression on an aeroelastic system with a supercritical Hopf bifurcation or subcritical Hopf bifurcation, respectively. The results show that the structural parameters of the NES have different influence on the supercritical Hopf bifurcation system and the subcritical Hopf bifurcation system.     

Rheological–dynamical analogy: Prediction of damping parameters of hysteresis damper

This research aims to predict the damping parameters of hysteresis damper based on an analytical rheological–dynamical (RDA) visco-elasto-plastic solution of one-dimensional longitudinal continuous vibrations of a bar. A visco-elasto-plastic bar or damper is an energy dissipation device. An attempt is made to estimate quantitatively the influence of material physical parameters of materials on the damping ratio in both the linear visco-elastic analysis and the nonlinear visco-elasto-plastic analysis of damper subjected to external vibration forces. Two types of damping are considered: viscous damping in the case of linear analysis, defined as stiffness and/or mass proportional and, in the case of nonlinear analysis, hysteresis damping caused by inelastic deformations of damper. Owing to the visco-elastic nature of the materials of the damper and the frequency dependence of the viscous damping ratio ξ, it is useful to consider separately the situations arising when ξ is positive (the system is stable) and when it is negative. A negative damping ratio means that the complementary solution of the response would not die away (the system is unstable because of factor e^{ξ · ω · t}). In the case of nonlinear analysis, the force–displacement relation is nonlinear, so it is very difficult to predict the actual damping and stiffness coefficients, even if the force–displacement characteristic is simply perfect elasto-plastic. Using the RDA method, which takes into account the rate of release of visco-elasto-plastic energy of the dissipation devices; nonlinear behaviors are linearized, enabling to obtain the equivalent damping and stiffness coefficients and the effective period for the damper.     

动力吸振器复合非线性能量阱对线性镗杆系统的振动控制

研究了线性动力吸振器复合非线性能量阱对线性镗杆在外部简谐激励下的振动控制. 忽略镗杆系统中的非线性因素, 建立了附加线性动力吸振器和非线性能量阱的镗杆系统的三自由度运动方程, 研究了附加复合式动力吸振器的镗杆系统的受迫振动. 通过平均法得到了附加复合式动力吸振器的镗杆系统的近似解析解, 并利用数值解验证了近似解析解的准确性, 两者具有很好的一致性. 利用近似解析解详细分析了线性动力吸振器和非线性能量阱的参数对镗杆振动抑制性能的影响. 对给定质量的复合式动力吸振器进行了参数优化, 其中线性动力吸振器参数采用H_∞优化方法的近似解析解进行了优化, 非线性能量阱的阻尼利用系统的近似解析解进行了优化. 分析结果表明, 线性动力吸振器与非线性能量阱组合可以有效抑制线性镗杆系统的振动, 而且采用参数优化后的复合式动力吸振器可以获得更好的减振效果. 通过附加非线性能量阱, 不但可以提高线性动力吸振器的振动抑制效果, 而且还可以提高振动控制系统的鲁棒性.      

Nonlinear vibration energy harvesting with adjustable stiffness,damping and inertia

A novel nonlinear structure with adjustable stiffness, damping and inertia is proposed and studied for vibration energy harvesting. The system consists of an adjustable-inertia system and X-shaped supporting structures. The novelty of the adjustable-inertia design is to enhance the mode coupling property between two orthogonal motion directions, i.e., the translational and rotational directions, which is very helpful for the improvement of the vibration energy harvesting performance. Weakly nonlinear stiffness and damping characteristics can be introduced by the X-shaped supporting structures. Combining the mode coupling effect above and the nonlinear stiffness and damping characteristics of the X-shaped structures, the vibration energy harvesting performance can be significantly enhanced, in both the low frequency range and broadband spectrum. The proposed 2-DOF nonlinear vibration energy harvesting structure can outperform the corresponding 2-DOF linear system and the existing nonlinear harvesting systems. The results in this study provide a novel and effective method for passive structure design of vibration energy harvesting systems to improve efficiency in the low frequency range.