Synthesis and photoluminescent properties of 1,1'-binaphthyl-based chiral phenylenevinylene dendrimers

New chiral, soluble binaphthyl derivatives that incorporate stilbenoid dendrons at the 6,6'-positions have been prepared. The synthesis of the new enantiopure dendrimers was performed in a convergent manner by Horner-Wadsworth-Emmons (HWE) reaction of the appropriately functionalized 1,1'-binaphthyl derivative (R)-1 and the appropriate dendrons (R)(2n)G(n)-CHO. Different electroactive units were incorporated in the peripheral positions of the dendrons in order to tune both the optical and electrochemical behavior of these systems. Fluorescence measurements on the chiral dendrimers reveal a strong emission with maxima between 409 and 508 nm depending upon the substitution pattern. Finally, the redox properties of the dendrimers were determined by cyclic voltammetry, showing the influence of the functional groups at the peripheral positions of the dendrimer on the redox behavior of these systems.     

Optical resolution of 1,16-dihydroxytetraphenylene by chiral gold(iii) complexation and its applications as chiral ligands in asymmetric catalysis

We report herein a novel approach involving optical resolution of (±)-1,16-dihydroxytetraphenylene (DHTP) by chiral gold(iii) complexation. This method features several key advantages, i.e., recyclability of chiral resolution reagents, feasibility of scaling up to gram quantities, and operational simplicity. On the basis of this method, which led to optically pure DHTP, a library of 2,15-diaryl (S)-DHTPs and several (S)-DHTP-derived phosphoramidite ligands were synthesized. Finally, the superior performance of a (S)-DHTP phosphoramidite ligand was demonstrated by efficient iridium-catalyzed asymmetric allylic alkynylation reactions.

Chiral gold(iii) complex was found to be a “golden key” to unlock (±)-1,16-dihydroxytetraphenylene (DHTP), leading to enantiopure DHTP in a large quantity. This approach provided convenient access to 2,15-diaryl (S)-DHTPs and phosphoramidites.     

Study on the Influence of Chirality in the Threading of Calix[6]arene Hosts with Dialkylammonium Axles

The influence of chirality in calixarene threading has been studied by exploiting the “superweak anion approach”. In particular, the formation of chiral pseudo[2]rotaxanes bearing a classical stereogenic center in their axle and/or wheel components has been considered. Two kind of pseudo[2]rotaxane stereoadducts, the “endo-chiral” and “exo-chiral” ones, having the stereogenic center of a cationic axle inside or outside, respectively, the calix-cavity of a chiral calixarene were preferentially formed with specifically designed chiral axles by a fine exploitation of the so-called “endo-alkyl rule” and a newly defined “endo-α-methyl-benzyl rule” (threading of a hexaalkoxycalix[6]arene with a directional (α-methyl-benzyl)benzylammonium axle occurs with an endo-α-methyl-benzyl preference). The obtained pseudorotaxanes were studied in solution by 1D and 2D NMR, and in the gas-phase by means of the enantiomer-labeled (EL) mass spectrometry method, by combining enantiopure hosts with pseudoracemates of one deuterated and one unlabeled chiral axle enantiomer. In both instances, there was not a clear enantiodiscrimination in the threading process with the studied host/guest systems. Possible rationales are given to explain the scarce reciprocal influence between the guest and host chiral centers.     

Modulating the Enantiodiscrimination Features of Inherently Chiral Selectors by Molecular Design: A HPLC and Voltammetry Study Case with Atropisomeric 2,2’-Biindole-Based Monomers and Oligomer Films

A family of inherently chiral electroactive selectors based on the 2,2’-biindole atropisomeric scaffold, of easy synthesis and modulable functional properties, is studied in cascade in two enantioselection contexts. They are at first investigated as probes in enantioselective HPLC, studying molecular structure and temperature effects, and achieving very efficient semipreparative enantioseparation. The enantiomers thus obtained, of remarkable chiroptical features (optical rotation as well as circular dichroism), are successfully applied as selectors in chiral voltammetry in different media for discrimination of the enantiomers of chiral electroactive probes, either by conversion into enantiopure electroactive electrode surfaces by electrooligomerization on glassy carbon substrate (the two monomers with shorter alkyl chains), or as chiral additive in achiral ionic liquid (the monomer with longest alkyl chains). Discrimination is conveniently and reproducibly achieved in terms of significant potential differences for the two enantiomers, specularly inverting either probe or selector configuration. In one case successful discrimination is also observed with the two probe enantiomers concurrently present, either as racemate or with enantiomeric excesses, neatly accounted for by the peak current ratios.     

Characterization of Inherently Chiral Electrosynthesized Oligomeric Films by Voltammetry and Scanning Electrochemical Microscopy (SECM)

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bibenzothiophene ((S)-BT₂T₄) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT₂T₄ (oligo-(S)-BT₂T₄) onto the Au electrode surface (resulting in oligo-(S)-BT₂T₄-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)₆]⁴⁻ and [Fe(CN)₆]³⁻ in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH₃CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)₆]³⁻ allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT₂T₄ film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT₂T₄ was even across its entire surface.     

Electroactive chiral oligo- and polymer layers for electrochemical enantiorecognition

Different electrochemical response for the specular images of chiral probe molecules obtained in diastereomeric conditions provided by electrode functionalization with enantiopure electroactive oligo- or polymer layers.

1. Download : Download high-res image (97KB)
2. Download : Download full-size image

     

Synthesis of Polysubstituted Ferrocenesulfoxides

The purpose of the study is to design synthetic methodologies, especially directed deprotometalation using polar organometallic reagents, to access polysubstituted ferrocenesulfoxides. From enantiopure 2-substituted (SiMe₃, PPh₂) S-tert-butylferrocenesulfoxides, a third substituent was first introduced at the 5 position (SiMe₃, I, D, C(OH)Ph₂, Me, PPh₂, CH₂NMe₂, F) and removal of the trimethylsilyl group then afforded 2-substituted ferrocenesulfoxides unreachable otherwise. Attempts to apply the “halogen dance” reaction to the ferrocenesulfoxide series led to unexpected results although rationalized in light of calculated pK_a values. Further functionalizations were also possible. Thus, new enantiopure, planar chiral di- and trisubstituted ferrocenes have been obtained, in addition to several original 2-substituted, 2,3- and 2,5-disubstituted, 2,3,5-trisubstituted and even 2,3,4,5-tetrasubstituted ferrocenesulfoxides, also enantiopure.     

Acyclic and cyclic aminophosphonic acids: asymmetric syntheses mediated by chiral sulfinyl auxiliary

Aminophosphonic acids have become increasingly important in different fields of chemistry, medicine and agriculture. This account outlines the results obtained in the author’s laboratory on the asymmetric synthesis of acyclic and cyclic aminophosphonic acids mediated by chiral sulfinyl auxiliary. A key reaction in the synthesis of enantiopure α- and β-aminoalkanephosphonic acids involving a highly diastereoselective addition of phosphite anions or α-phosphonate carbanions to enantiopure sulfinimines is discussed. The asymmetric cyclopropanation of enantiopure α-phosphorylvinyl sulfoxides with sulfur ylides is presented as a platform for developing a new approach to optically active β-aminocyclopropanephosphonic acids. It is exemplified by the total synthesis of enantiopure β-amino-γ-phenylcyclopropanephosphonic acid - a constrained analogue of the GABA_B antagonist phaclofen.     

Production of enantiopure chiral aryl heteroaryl carbinols using whole‐cell Lactobacillus paracasei biotransformation

Abstract

Aryl and heteroaryl chiral carbinols are useful precursors in the synthesis of drugs. Lactobacillus paracasei BD87E6, which is obtained from a cereal based fermented beverage, was investigated as whole cell biocatalyst for the bioreduction of different ketones (including aromatic, hetero-aromatic and fused bicyclic ketone) into chiral carbinols, which can be used as a pharmaceutical intermediate. The study shows that bioreduction of aryl, heteroaryl and fused bicyclic ketone (1-5) to their corresponding chiral carbinols (1a-5a) in excellent enantioselectivity (>99%) with high yields. This study gave the first example for an enantiopure production of (S)-6-chlorochroman-4-ol (3a), which has many antioxidant activity, by a biological method. For asymmetric bioreduction of other prochiral ketones, these results open way to use of L. paracasei BD87E6 as biocatalysts. Also, the present process shows a hopeful and alternative green synthesis for the production of enantiopure carbinols in a mild, inexpensive and environmentally friendly process.     

Catalytic enantioselective synthesis of macrodiolides and their application in chiral recognition

New types of C₂-symmetric chiral macrodiolides are readily obtained via chiral N,N′-dioxide-scandium(iii) complex-promoted asymmetric tandem Friedel–Crafts alkylation/intermolecular macrolactonization of ortho-quinone methides with C3-substituted indoles. This protocol provides an array of enantioenriched macrodiolides with 16, 18 or 20-membered rings in moderate to good yields with high diastereoselectivities and excellent enantioselectivities through adjusting the length of the tether at the C3 position of indoles. Density functional theory calculations indicate that the formation of macrocycles is more favorable than that of 9-membered-ring lactones in terms of kinetics and thermodynamics. The potential utility of these intriguing chiral macrodiolide molecules is demonstrated in the enantiomeric recognition of aminols and chemical recognition of metal ions.

An asymmetric tandem Friedel–Crafts alkylation/intermolecular macrolactonization of ortho-quinone methides with C3-substituted indoles was achieved by using a chiral N,N′-dioxide-scandium(iii) complex.     

New chiral crown ether stationary phase for the liquid chromatographic resolution of α-amino acid enantiomers

A new chiral stationary phase (CSP) for the liquid chromatographic separation of enantiomers was prepared by bonding a novel enantiopure (diphenyl-substituted 1,1′-binaphthyl) crown ether to 5 μm silica gel. The resulting CSP was applied to the separation of the enantiomers of various natural and unnatural α-amino acids. All α-amino acids tested were resolved very well on the new CSP, with the exception of proline, which does not contain a primary amino group. The resolution of α-amino acid enantiomers on this new CSP was found to be dependent on the type and amounts of organic and acidic modifiers, and on column temperature.     

A chiral cobalt(ii) complex catalyzed enantioselective aza-Piancatelli rearrangement/Diels–Alder cascade reaction

A chiral N,N′-dioxide/cobalt(ii) complex catalyzed highly diastereoselective and enantioselective tandem aza-Piancatelli rearrangement/intramolecular Diels–Alder reaction has been disclosed. Various valuable hexahydro-2a,5-epoxycyclopenta[cd]isoindoles bearing six contiguous stereocenters have been obtained in good yields with excellent diastereo- and enantio-selectivities from a wide range of both readily available 2-furylcarbinols and N-(furan-2-ylmethyl)anilines.

An asymmetric aza-Piancatelli rearrangement/Diels–Alder cascade reaction between 2-furylcarbinols and N-(furan-2-ylmethyl)anilines was realized by using a chiral N,N′-dioxide/cobalt(ii) complex catalyst.     

An enantiopure galactose oxidase model: synthesis of chiral amino alcohols through oxidative kinetic resolution catalyzed by a chiral copper complex

An enantiopure galactose oxidase (GO) enzyme model has been synthesized from readily available (R)-BINAM and Cu(OTf)₂, and the enantiopure GO model has been effectively used in situ as an efficient chiral catalyst for the synthesis of chiral amino alcohols through oxidative kinetic resolution (OKR), where molecular oxygen is used as the sole oxidant. Under the proposed catalytic conditions, both ortho- and para-substituted amino alcohols were resolved with good to excellent enantiomeric excesses through oxidative kinetic resolution.     

Surface chiroselective assembly of enantiopure crystalline porous films containing bichiral building blocks

The development of chiral crystalline porous materials (CPMs) containing multiple chiral building blocks plays an important role in chiral chemistry and applications but is a challenging task. Herein, we report the first example of bichiral building block based enantiopure CPM films containing metal–organic cages (MOCs) and metal complexes. The functionalized substrate was immersed subsequently into homochiral metal complex (R)- or (S)-Mn(DCH)₃ (DCH = 1,2-diaminocyclohexane) and racemic Ti₄L₆ cage (L = embonate) solutions by a layer-by-layer growth method. During the assembly process, the substrate surface coordinated with (R)- or (S)-Mn(DCH)₃ can, respectively, layer-by-layer chiroselectively connect Δ- or Λ-Ti₄L₆ cages to form homochiral (R, Δ)- or (S, Λ)-CPM films with a preferred [111] growth orientation, tunable thickness and homogeneous surface. The resulting enantiopure CPM films show strong chirality, photoluminescence, and circularly polarized luminescence (CPL) properties as well as good enantioselective adsorption toward enantiomers of 2-butanol and methyl-lactate. The present in situ surface chiroselective strategy opens a new route to assemble homochiral CPM films containing multiple chiral building blocks for chiral applications.

Bichiral building block based enantiopure CPM films containing metal–organic cages (MOCs) and metal complexes are chiroselectively assembled on the substrate surface by a layer-by-layer method.     

Enantiopure O-substituted phenylphosphonothioic acids: chiral recognition ability during salt crystallization and chiral recognition mechanism

[structure: see text] The chiral recognition ability of enantiopure O-methyl, O-ethyl, O-propyl, and O-phenyl phenylphosphonothioic acids (1a-d) for various kinds of racemic amines during salt crystallization and the chiral recognition mechanism were thoroughly investigated. The chiral recognition abilities of enantiopure 1a-d for a wide variety of racemic amines varied in a range of 6 to >99% enantiomeric selectivity. Deposited less-soluble diastereomeric salts were classified into two categories, prism- and needle-type crystals; the prism-type crystals were composed of a globular molecular cluster, while there existed a 2(1) column in the needle-type crystals. In contrast to a general observation of a similar 2(1) column in the less-soluble diastereomeric salt crystals of chiral primary amines with chiral carboxylic acids, the globular molecular cluster is a very unique hydrogen-bonding motif that has never been constructed in diastereomeric salt crystals. Excellent chiral recognition was always achieved when the less-soluble diastereomeric salts were prism-type crystals. Significant correlations were found between the degree of the chiral recognition with 1a-d, the crystal shape of the less-soluble diastereomeric salts, and the hydrogen-bonding motif (molecular cluster/2(1) column). The chiral recognition mechanisms via the molecular cluster and the 2(1) column formations are discussed in detail on the basis of X-ray crystallographic analyses.     

Enantiopure nanohoops through racemic resolution of diketo[n]CPPs by chiral derivatization as precursors to DBP[n]CPPs

Strained conjugated nanohoops are attractive synthetic targets due to the bending of their π-system, which leads to intriguing optoelectronic properties, among others. By incorporating non-mirror-symmetric aromatic panels, chiral nanohoops can be obtained. We herein present a strategy to enantiopure nanohoops by racemic resolution through chiral derivatization of diketone-embedded hoops. The resulting diketo[n]CPPs (n = 6, 7) contain two stereogenic carbon atoms each and possess high fluorescence quantum yields paired with circularly polarized luminescence. These are versatile precursors to chiral dibenzo[a,e]pentalene-based nanohoops DBP[n]CPPs with antiaromatic character and ambipolar electrochemical behavior. Due to their strained structures the DBP[n]CPPs do not racemize at room temperature, which is supported by high calculated isomerization barriers. X-ray crystallographic investigations on the DBP[n]CPPs and their precursors as well as DFT calculations provide insight into the build-up of strain energy during the synthetic transformations.

Racemic resolution of diketone-embedded cycloparaphenylenes by derivatization with a chiral auxiliary provides scalable access to enantiopure hoops with chiroptical properties.     

Addition reactions to chiral aziridine-2-carboxaldimine toward various enantiopure nitrogen-containing heterocycles

Chiral (2R,1′R)-(1′-phenylethyl)aziridine-2-carboxaldimine was utilized as a nitrogen-containing starting substrate for the preparation of various enantiopure nitrogen-containing heterocycles. The additions of nucleophiles including organomagnesium reagents, cyanotrimethylsilane and ketene acetal to the chiral (2R,1′R)-(1′-phenylethyl)aziridine-2-carboxaldimine proceeded in highly stereoselective manner via chelation controlled transition states. Subsequent treatment of adducts with triphosgene and NaH yielded 5-substituted-4-chloromethylimidazolidin-2-ones. This imine was also served as either aza-diene or aza-dienophile with olefin or diene to provide hetero-Diels-Alder adducts 2-aziridinylpiperidines or 1,2,3,4-tetrahydroquinolines.     

Some new protocols for the assignment of absolute configuration by NMR spectroscopy using chiral solvating agents and CDAs

The utility of enantiopure BINOL (1,10-Bi-2-naphthol), in a ternary ion-pair complex, which is obtained using a carboxylic acid and an organic base, as a versatile chiral solvating agent (CSA) has been demonstrated for chiral analysis and the absolute configuration assignment of hydroxy acids. Another protocol where the utility of NOBIN as a CSA has been developed for discrimination and absolute configuration assignment of acids, hydroxy acids and their derivatives with a distinct strategy where a third ingredient, p-toluenesulfonic acid (p-TsOH) serves as a linker. In addition some three component chiral derivatization protocols have been introduced, such as the use of 2-formylphenylboronic acid and enantiopure mandelic acid or a primary amine for the determination of the configuration of primary amines and hydroxy acids, respectively. A simple, rapid and highly efficient three component chiral derivatizing protocol has also been discussed which was developed for assigning the absolute configuration of chiral α-hydroxy acids and their derivatives, which involves the coupling of 2-formylphenylboronic acid with (R)-[1,1-binaphthalene]-2,2-diamine, and (S)-[1,1-binaphthalene]-2,2-diamine separately. In a few examples, the DFT based theoretical calculations have been carried out to determine the geometry optimized structures of the complexes.     

Synthesis of new chiral organosulfur donors with hydrogen bonding functionality and their first charge transfer salts

The syntheses of a range of enantiopure organosulfur donors with hydrogen bonding groups are described including TTF related materials with two, four, six and eight hydroxyl groups and multiple stereogenic centres and a pair of chiral N-substituted BEDT-TTF acetamides. Three charge transfer salts of enantiopure poly-hydroxy-substituted donors are reported, including a 4:1 salt with the meso stereoisomer of the dinuclear [Fe₂(oxalate)₅]⁴⁻ anion in which both cation and anion have chiral components linked together by hydrogen bonding, and a semiconducting salt with triiodide.     

Chemical Composition of Leaves,Stem, and Roots of Peperomia pellucida (L.) Kunth

Peperomia pellucida is a species known in the Amazon as “erva-de-jabuti” that has been used in several therapeutic applications based on folk medicine. Herein, we describe the classes, subclasses, and the main compounds of the leaves, stems, and roots from P. pellucida by ultra-high performance liquid chromatography coupled to high-resolution mass spectrometry associated with molecular networks, mirror plot on the GNPS library, and machine learning. These data show compounds that were annotated for the first time in the Peperomia genus, such as 2′,4′,5′-trihydroxybutyrophenonevelutin, dehydroretrofractamide C, and retrofractamide B.