Determination of the reference value of nitrogen mass fraction in the reference material of Polish soil

Ensuring a traceability and meaningful of a measurements is one of the most important stages of each analysis, each measurement. It is especially important for measurement of the environmental samples, like soil, which is a very complex matrix. A certified reference materials (CRMs) should be routinely used for this purpose. The paper discusses the procedure for preparation of the soil samples for certification as CRM. As for agricultural reasons there is a growing demand for CRMs regarding a nitrogen mass fraction in the Polish soil, we prepared such a material and established the reference value with associated measurement uncertainty. Homogeneity and stability of the material were shown to be appropriate for the intended purpose. The presented approach can also be used in a process of manufacture of a laboratory reference material, which can be used for a routine quality control.     

Certified reference materials for the quality control of environmental analysis within the standards,measurements and testing programme (formerly BCR)

A great number of analyses is performed every year, the results of which are used for many purposes, e.g. the quality of goods and food, the status of quality of the environment or the health of patients. The accuracy of these results is a prerequisite for a good interpretation of the data obtained. One of the most powerful tool for achieving quality control of chemical analysis is to use reference materials (RMs) and certified reference materials (CRMs). These materials are necessary for one or more of the following items: method validation (CRMs), monitoring of the state of statistical control (RMs), samples in inter-comparisons (RMs), etc. The requirements and use of RMs and CRMs in chemical analysis are described, with special emphasis on environmental analysis, and some examples of environmental materials currently in production within the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission are given.     

Certified reference materials of soils and sewage sludges for the quality control of trace element environmental monitoring

For the wide variety of soil/sludge matrices encountered in analytical practice, a range of CRMs should be available to verify the analytical quality control of any determination carried out, using samples which should be as similar as possible to real soil and sludge samples so that the method's performance may be tested under real analytical conditions. This paper presents basic requirements for the preparation of soil and sludge CRMs for the quality control of trace element determinations (total and extractable contents, following strict extraction protocols), and gives recent examples of new certifications successfully concluded by the SM&T programme of the European Commission.     

Certified reference materials for analytical mercury speciation in biological and environmental matrices: Do they meet user needs?; a review

The usefulness of a certified reference material (CRM) for analytical method validation and quality control purposes is attributed mainly to its key properties, namely homogeneity and stability. However, it is also advisable to select suitable CRMs in terms of representativeness. To assess the representativeness of a CRM for analytical mercury speciation, a number of aspects must be considered in regard to the routine samples analyzed: the origin of the matrix, the type of mercury species and the level of concentration.     

Role of NAA in the characterization of sampling behaviors of multiple elements in CRMs

Taking the advantage of the high precision and accuracy of neutron activation analysis (NAA), sampling constants have been determined for multielements in several international and Chinese reference materials. The suggested technique may be used for finding elements in existing CRMs qualified for quality control (QC) of small size samples (several mg or less), and characterizing sampling behaviors of multielements in new CRMs specifically made for QC of microanalysis.     

CRMs for quality control of determinations of chemical forms of elements in support to EU legislation

The concern for the control of toxic chemical forms of elements in the environment is reflected by an increasing number of analyses performed by research and routine laboratories. The European Commission has recognised the need to include some of these species in the list of dangerous substances to be monitored, e.g. in the marine environment or in groundwater. However, in most cases, the specifications are far from being sufficient in respect to the chemical forms of the element to be determined. Furthermore, these determinations are in most cases based on multi-step analytical techniques which are often prone to errors (e.g. at the extraction, derivatization or separation steps). Certified reference materials (CRMs) certified for their content in chemical forms of elements are, therefore, necessary to ensure the accuracy of these measurements and hence the respect of the regulations. However, the lack of CRMs for speciation analysis hampers the quality control of determinations which in turn leads to an incomparability of data produced; so far the number of CRMs produced by international organisations, e.g. NIST (USA), NIES (Japan), NRCC (Canada) and BCR (Belgium), is very limited and concerns mainly compounds such as e.g. methyl-mercury and butyltin compounds in biological matrices or sediments. The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a series of projects for the improvement of speciation analysis in environmental matrices, the final aim of which being the production of a variety of environmental CRMs. The existing EU legislation involving chemical forms of elements is presented, the requirements for the preparation of CRMs for speciation analysis are discussed and an update of the most recent CRMs produced within the Standards, Measurements and Testing Programme (SM&T) is given.     

CRMs for quality control of determinations of chemical forms of elements in support to EU legislation

The concern for the control of toxic chemical forms of elements in the environment is reflected by an increasing number of analyses performed by research and routine laboratories. The European Commission has recognised the need to include some of these species in the list of dangerous substances to be monitored, e.g. in the marine environment or in groundwater. However, in most cases, the specifications are far from being sufficient in respect to the chemical forms of the element to be determined. Furthermore, these determinations are in most cases based on multi-step analytical techniques which are often prone to errors (e.g. at the extraction, derivatization or separation steps). Certified reference materials (CRMs) certified for their content in chemical forms of elements are, therefore, necessary to ensure the accuracy of these measurements and hence the respect of the regulations. However, the lack of CRMs for speciation analysis hampers the quality control of determinations which in turn leads to an incomparability of data produced; so far the number of CRMs produced by international organisations, e.g. NIST (USA), NIES (Japan), NRCC (Canada) and BCR (Belgium), is very limited and concerns mainly compounds such as e.g. methyl-mercury and butyltin compounds in biological matrices or sediments. The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a series of projects for the improvement of speciation analysis in environmental matrices, the final aim of which being the production of a variety of environmental CRMs. The existing EU legislation involving chemical forms of elements is presented, the requirements for the preparation of CRMs for speciation analysis are discussed and an update of the most recent CRMs produced within the Standards, Measurements and Testing Programme (SM&T) is given.     

Preparation and certification of two freshwater sediments certified reference materials for polycyclic aromatic hydrocarbons

Two freshwater sediments certified reference materials (CRMs) for 16 polycyclic aromatic hydrocarbons (PAHs) have been developed by the Institute for Environmental Reference Materials (IERM) of Ministry of Environmental Protection (MEP) in China. The methodology for preparing the CRMs of PAHs in sediments is described in this paper. The collected natural sediment samples were air-dried, ground, homogenised, packed, sterilised and tested on stability and homogeneity. Homogeneity results showed that the between-unit variation was confirmed to be below 4.5% for each compound. Stability was assessed after storage of samples for 16 months at temperature less than 30°C and in shade. The certification of the natural sediment matrix CRMs for PAHs was based on the agreement of results using different analytical techniques including gas chromatography/mass spectrometry (GC/MS) and reversed-phase liquid chromatography (LC) by no less than eight collaborating laboratories including IERM. Results of the homogeneity showed that the calculated u_bb′ was 0.9–2.5% for environmental river standard-4 (ERS-4) and 9–2.3% for environmental lake standard-1 (ELS-1), whereas stability results of total 16 PAHs indicated that the calculated u_rel,lts was 4.2% for ERS-4 and 2.2% for ELS-1. Certified values of 16 PAHs in ERS-4 varied from 8.5 to 167 μg/kg and ranged from 0.036 to 2.8 mg/kg in ELS-1.The good comparability, together with the independent confirmation of the assigned mass fraction by using different methods, confirmed that the CRMs are suitable for the method validation and quality control in soil or sediments analysis.     

Determination of total mercury in environmental and biological samples using k0-INAA, RNAA and CVAAS/AFS techniques: Advantages and disadvantages

The accuracy and precision of the results obtained for total mercury in various environmental and biological samples and certified reference materials (CRMs) by various analytical methods, including k ₀-instrumental neutron activation analysis (k ₀-INAA), radiochemical neutron activation analysis (RNAA) and cold vapour atomic absorption (and atomic fluorescence) spectrometry (CVAAS/AFS) used in routine analysis in our laboratory, were investigated. Three natural matrix reference materials (RMs) from the International Atomic Energy Agency (IAEA), five CRMs from the Institute for Reference Materials and Measurements (IRMM), six CRMs from the National Institute of Standards and Technology (NIST) and one from the Jožef Stefan Institute (IJS) were analyzed. The results obtained show good agreement between certified or assigned values, and between the methods used, except for some data obtained by k ₀-INAA in biological samples. This can be explained by losses during irradiation in semi-open systems (irradiation in plastic ampoules) and/or spectral interferences. This revised version was published online in August 2006 with corrections to the Cover Date.     

Quality control procedures for chloride and nitrate ions analysis in plant samples by ion chromatography

This paper describes useful procedures to monitor quality of chloride and nitrate ions analysis in plant samples by ion chromatography. The use of certified reference materials (CRMs) provided an efficient way to verify the accuracy of the method. Data generated by the method of analysis for chloride compared favourably with certified values. The quality system included also the systematic analysis of an internal reference sample in each batch of samples routinely analysed. The performance of the method, including extraction and measurement, over a period of 3 years was reported with control charts. The yearly variation coefficients were less than 6.5% for chloride and nitrate ions. Finally, the analytical method was evaluated through the participation of laboratory to an international proficiency testing scheme. Found results were not significantly different from published medians.     

Double molecular imprinting--a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water

It is now well recognised that the quality control (QC) of all types of analyses, including environmental analyses depends on the appropriate use of reference materials. One of the ways to check the accuracy of methods is based on the use of Certified Reference Materials (CRMs), whereas other types of (not certified) Reference Materials (RMs) are used for routine quality control (establishment of control charts) and interlaboratory testing (e.g. proficiency testing). The perception of these materials, in particular with respect to their production and use, differs widely according to various perspectives (e.g. RM producers, routine laboratories, researchers). This review discusses some critical aspects of RM use and production for the QC of environmental analyses and describes the new approach followed by the Measurements & Testing Generic Activity (European Commission) to tackle new research and production needs.     

Nuclear analytical methods in quality control of microanalysis

Quantitative calibration and quality control have been a major bottleneck in microanalysis due to the lack of natural-matrix CRMs certified at sample sizes compatible with those of unknown samples. In this paper, a solution is described to characterize sampling behavior for individual elements, so as to identify elements homogeneous enough at stated sample size levels in given CRMs/RMs. By using a combination of several nuclear analytical techniques, INAA-EDXRF-μPIXE, sampling behavior for individual elements can be characterized at sample size levels from grams down to pg. Natural-matrix CRMs specifically for QC of microanalysis may thus be created. Additional information in certificates of these new generation CRMs is imagined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Proficiency test on the determination of mineral oil from polluted soils

Mineral oil products are abundant sources of environmental contamination. A Finnishproficiency test was carried out to investigate the quality of data provided in an analysis of mineral oil in polluted soils. The homogeneity and stability of the samples were tested. The calculated concentration or the median value of the results was used as the assigned value because of the unavailability of certified reference materials (CRMs). The samples were analysed using an infrared spectroscopy (IR) or gas chromatography (GC) procedure. Even if the participating laboratories had little experience with GC, the results were promising. Hence, the GC procedure will replace IR as the new ISO standard (ISO/DIS 16703) in the near future in many Finnish environmental laboratories. There is a need for CRMs for the determination of mineral oil using the GC method due to common contamination problems caused by mineral oil. Received: 9 December 2001 Accepted: 14 February 2002     

Double molecular imprinting – a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water

It is now well recognised that the quality control (QC) of all types of analyses, including environmental analyses depends on the appropriate use of reference materials. One of the ways to check the accuracy of methods is based on the use of Certified Reference Materials (CRMs), whereas other types of (not certified) Reference Materials (RMs) are used for routine quality control (establishment of control charts) and interlaboratory testing (e.g. proficiency testing). The perception of these materials, in particular with respect to their production and use, differs widely according to various perspectives (e.g. RM producers, routine laboratories, researchers). This review discusses some critical aspects of RM use and production for the QC of environmental analyses and describes the new approach followed by the Measurements & Testing Generic Activity (European Commission) to tackle new research and production needs.     

Development of caprine liver quality control materials for trace element analysis of biological tissues

Certified reference materials (CRMs) are used in analytical chemistry for method validation studies in order to establish measurement accuracy, traceability, and long-term stability throughout repeated analyses. Quality control (QC) during routine analysis requires access to stable materials appropriate for the sample matrix being analyzed. However, it may be difficult to find representative, low-cost QC materials, especially for specific analytes in biological tissue matrices. Here, four caprine liver pools are prepared for use as internal QC materials for trace element measurements in biological tissue. Analytes of interest include essential and nonessential trace elements and the lanthanide series elements. The suitability of caprine liver to serve as a secondary reference material (RM), as well as for routine QC purposes, is demonstrated through homogeneity and stability measurements, and the acquisition of precision and uncertainty data. Traceability is established for selected analytes for which available CRMs can provide an unbroken chain of calibrations.     

Preparation and certification of creatinine and urea reference materials with certified purity as a traceability source in clinical chemical measurements

Purity certified reference materials (CRMs) are playing a key role in metrological traceability, because they form the basis for many traceability chains in chemistry. Recently, the National Metrology Institute of Japan (NMIJ) has developed two purity CRMs for creatinine (NMIJ CRM 6005-a) and urea (NMIJ CRM 6006-a), because the concentrations of these two compounds are frequently measured in clinical laboratories for monitoring the renal functions. In the certification of purity CRMs, it is essential that the materials have been thoroughly characterized for purity, and the purity should preferably be determined directly by a primary method of measurements. In the development of these two CRMs, we used the purified materials as candidates. The certified values were assigned based on the results of two different methods; acidimetric titration and nitrogen determination by the Kjeldahl method. Since both methods cannot distinguish some impurities from the target compounds, major impurities in the candidate materials were also identified, quantified, and subtracted. These CRMs can provide a traceability link between routine clinical methods and SI units. Presented at BERM-11, October 2007, Tsukuba, Japan.     

Analysis of food and tissue samples for IAEA's Reference Asian Man Project (Phase 2): Quality assurance aspects

Quality assurance (QA) procedures were established to generate reliableresults for a set of trace elements of radiological significance, namely Cs,Sr, Th and U. Special attention was given to design QA procedures by incorporatingboth internal and external analytical quality control (AQC) procedures, sincethe project involved a group of countries working on the same analytical problemunder different conditions. The procedures included (1) use of existing certifiedreference materials (CRMs) to validate analytical methods, (2) generatingreference values in selected CRMs where certified results were not available,(3) preparing a new total diet CRM, (4) adopting the concept of a CentralReference Laboratory (CRL) to harmonize QA efforts, and finally, (5) analysisof 10% of all samples in the project by both the CRL and participant laboratoriesto assess performance of the methods used.     

Efficient production of reference materials of hazardous organics using smart calibration by nuclear magnetic resonance

The accurate quantification of pesticide residues in food is an important factor in assuring the quality of life of our citizens. In general, chromatographic methods are used, which require certified reference materials (CRMs) for each analyte of interest for accurate quantitative analysis. Recently, regulation of pesticides in food, limiting the positive maximum residue (positive list system) has been brought into effect in Japan. Furthermore, ISO/IEC 17025 requires calibration and testing laboratories to program calibrations and measurements traceable to the International System of Units (SI). Accordingly, these laboratories need a suite of CRMs that are traceable to the SI. In order to address these requirements for every analyte of interest in an efficient manner, a new approach to producing SI traceable CRMs is required. Nuclear magnetic resonance (NMR) has been used widely in chemical analysis. One of the well known characteristics of NMR is the proportional relationship between peak area and the number of nuclei contributing to the peak. If accurate relative intensities of peak areas are obtained, this provides an attractive quantitative tool for organic compounds. The area of a signal from an analyte can be measured with respect to another signal originating from a comparator that has been added to the sample solution. The chosen comparator should not react with the analyte or resonate at any chemical shift similar to that of the analyte. This enables us to produce SI traceable CRMs more effectively. In this paper, we demonstrate a new approach for producing CRMs for pesticides using quantitative NMR??an SI traceable quantitative technique.     

Certification of reference materials for inorganic trace analysis: the INCT approach

This paper presents the work done by the Institute of Nuclear Chemistry and Technology (INCT), Warsaw on a procedure of the certification of matrix reference materials (CRMs) for inorganic trace analysis. The INCT has been involved in preparation and certification of that type of CRMs since 1986 till now. The certification of CRMs is performed on the basis of statistical evaluation of the data obtained from the worldwide interlaboratory comparison. The initially adopted certification procedure has been developed, and the final shape is presented and discussed. The modifications are connected with the new demands of the international standards. The results of analysis of candidate CRMs obtained by the potentially primary procedures based on radiochemical neutron activation analysis (RNAA) and results of analysis of CRM accompanying candidate RMs are applied in the certification process for quality assurance purpose.     

Production of certified reference materials for the detection of genetically modified organisms

Certified reference materials (CRMs) are an essenIial tool in the quality assurance of analytical measurements. They are produced, certified, and used in accordance with relevant ISO (International Organization for Standardization) and BCR (Community Bureau of Reference) guidelines. The Institute for Reference Materials and Measurements (IRMM; Geel, Belgium) has produced the first powdery genetically modified organism (GMO) CRMs in cooperation with the Institute for Health and Consumer Protection (Ispra, Italy). Until now, different weight percentages in the range of 0-5% for 4 GMOs in Europe were produced and certified: Bt (Bacillus thuringiensis)-11 and Bt-176 maize, Roundup Ready soybean, and MON810 maize. Bt-11 and Bt-176 maize and Roundup Ready soybean were produced by IRMM on behalf of Fluka Chemie AG (Buchs, Switzerland). Characterization of used base material is the first step in production and is especially important for GMO CRMs. The production of powdery GMO CRMs and methods used for production control are described. Thorough control of homogeneity and stability are essential for certification of reference materials and ensure validity of the certificate for each bottle of a batch throughout a defined shelf-life. Because production of reference materials and their maintenance are very labor- and cost-intensive tasks, the usefulness of new types of GMO CRMs must be estimated carefully.