New benzo[h]quinoline-based ligands and their pincer Ru and Os complexes for efficient catalytic transfer hydrogenation of carbonyl compounds

New benzo[h]quinoline ligands (HCN'N) containing a CHRNH2 (R=H (a), Me (b), tBu (c)) function in the 2-position were prepared starting from benzo[h]quinoline N-oxide (in the case of ligand a) and 2-chlorobenzo[h]quinoline (for ligands b and c). These compounds were used to prepare ruthenium and osmium complexes, which are excellent catalysts for the transfer hydrogenation (TH) of ketones. The reaction of a with [RuCl2(PPh3)3] in 2-propanol at reflux afforded the terdentate CN'N complex [RuCl(CN'N)(PPh3)2] (1), whereas the complexes [RuCl(CN'N)(dppb)] (2-4; dppb=Ph2P(CH2)4PPh2) were obtained from [RuCl2(PPh3)(dppb)] with a-c, respectively. Employment of (R,S)-Josiphos, (S,R)-Josiphos*, (S,S)-Skewphos, and (S)-MeO-Biphep in combination with [RuCl2(PPh3)3] and ligand a gave the chiral derivatives [RuCl(CN'N)(PP)] (5-8). The osmium complex [OsCl(CN'N)(dppb)] (12) was prepared by treatment of [OsCl2(PPh3)3] with dppb and ligand a. Reaction of the chloride 2 and 12 with NaOiPr in 2-propanol/toluene afforded the hydride complexes [MH(CN'N)(dppb)] (M=Ru 10, Os 14), through elimination of acetone from [M(OiPr)(CN'N)(dppb)] (M=Ru 9, Os 13). The species 9 and 13 easily reacted with 4,4'-difluorobenzophenone, via 10 and 14, respectively, affording the corresponding isolable alkoxides [M(OR)(CN'N)(dppb)] (M=Ru 11, Os 15). The complexes [MX(CN'N)(P2)] (1-15) (M=Ru, Os; X=Cl, H, OR; P=PPh3 and P2=diphosphane) are efficient catalysts for the TH of carbonyl compounds with 2-propanol in the presence of NaOiPr (2 mol %). Turnover frequency (TOF) values up to 1.8x10(6) h(-1) have been achieved using 0.02-0.001 mol % of catalyst. Much the same activity has been observed for the Ru--Cl, --H, --OR, and the Os--Cl derivatives, whereas the Os--H and Os--OR derivatives display significantly lower activity on account of their high oxygen sensitivity. The chiral Ru complexes 5-8 catalyze the asymmetric TH of methyl-aryl ketones with TOF approximately 10(5) h(-1) at 60 degrees C, up to 97 % enatiomeric excess (ee) and remarkably high productivity (0.005 mol % catalyst loading). High catalytic activity (TOF up to 2.2x10(5) h(-1)) and enantioselectivity (up to 98 % ee) have also been achieved with the in-situ-generated catalysts prepared from [MCl2(PPh3)3], (S,R)-Josiphos or (S,R)-Josiphos*, and the benzo[h]quinoline ligands a-c.     

Pincer Ru and Os complexes as efficient catalysts for racemization and deuteration of alcohols

The pincer complexes [MX(CNN)(PP)] (M = Ru, Os; X = Cl, OTf; HCNN = 1-(6-arylpyridin-2-yl)methanamine; PP = diphosphine) have proven to efficiently catalyze both racemization and deuteration of alcohols in the presence of a base. Chiral alcohols have been racemized at 30-50 °C using 1 mol% of Ru or Os pincer complexes and 5 mol% of KOtBu in 2-propanol. Primary and secondary alcohols are efficiently deuterated at the α position, with respect to the OH group, using 2-propanol-d(8) as solvent with Ru or Os pincer complexes and KOtBu at 30-50 °C. For secondary alcohols incorporation of deuterium at the β position has also been observed. In 2-propanol-d(8) the pincer complexes catalyze the simultaneous deuteration and racemization of (S)-1-phenylethanol, the two processes being strictly correlated. For both reactions much the same activity has been observed with the Ru and Os complexes. The pincer complexes display a superior activity with respect to the related compounds [MCl(2)(NN)(PP)] (NN = bidentate amine or pyridine ligand). The synthesis of the new complexes [MCl(CNN)(PP)] (M = Ru, 2, 4 and Os, 6, 7; PP = dppb, dppf) and [Ru(OTf)(CNN)(dppb)] (3) is also reported.     

Chiral and Nonchiral [OsX2(diphosphane)(diamine)] (X: Cl,OCH2CF3) Complexes for Fast Hydrogenation of Carbonyl Compounds

The osmium complexes trans‐[OsCl₂(dppf)(diamine)] (dppf: 1,1′‐bis(diphenylphosphino)ferrocene; diamine: ethylenediamine in 3 , propylenediamine in 4 ) were prepared by the reaction of [OsCl₂(PPh₃)₃] ( 1 ) with the ferrocenyl diphosphane, dppf and the corresponding diamine in dichloromethane. The reaction of derivative 3 with NaOCH₂CF₃ in toluene afforded the alkoxide cis‐[Os(OCH₂CF₃)₂(dppf)(ethylenediamine)] ( 5 ). The novel precursor [Os₂Cl₄(P(m‐tolyl)₃)₅] ( 2 ) allows the synthesis of the chiral complexes trans‐[OsCl₂(diphosphane)(1,2‐diamine)] ( 6 – 9 ; diphosphane: (R)‐[6,6′‐dimethoxy(1,1′‐biphenyl)‐2,2′‐diyl]bis[1,1‐bis(3,5‐dimethylphenyl)phosphane] (xylMeObiphep) or (R)‐(1,1′‐binaphthalene)‐2,2′‐diylbis[1,1‐bis(3,5‐dimethylphenyl)phosphane] (xylbinap); diamine=(R,R)‐1,2‐diphenylethylenediamine (dpen) or (R,R)‐1,2‐diaminocyclohexane (dach)), obtained by the treatment of 2 with the diphosphane and the 1,2‐diamine in toluene at reflux temperature. Compounds 3 – 5 in ethanol and in the presence of NaOEt catalyze the reduction of methyl aryl, dialkyl, and diaryl ketones and aldehydes with H₂ at low pressure (5 atm), with substrate/catalyst (S/C) ratios of 10 000–200 000 and achieving turnover frequencies (TOFs) of up to 3.0×10⁵ h^?1 at 70 °C. By employment of the chiral compounds 6 – 9 , different ketones, including alkyl aryl, bulky tert‐butyl, and cyclic ketones, have successfully been hydrogenated with enantioselectivities up to 99 % and with S/C ratios of 5000–100 000 and TOFs of up to 4.1×10⁴ h^?1 at 60 °C.     

Surface-inspired molecular vanadium oxide catalysts for the oxidative dehydrogenation of alcohols: evidence for metal cooperation and peroxide intermediates

On the basis that thiacalix[4]arene (H(4)T4A) complex (PPh(4) )(2) [H(2)T4A(VO(2))](2) (Ia) was found to be an adequate functional model for surface species occurring on vanadium oxide based catalysts and itself catalyses the oxidative dehydrogenation (ODH) of alcohols, an analogue containing 2,2'-thiobis(2,4-di-tert-butylphenolate), (S)L(2-), as ligand, namely, (PPh(4))(2)[(S)LVO(2)](2) (II) was investigated in the same context. Despite the apparent similarity of Ia and II, studies on II revealed several novel insights, which are also valuable in connection with surfaces of vanadia catalysts: 1) For Ia and II similar turnover numbers (TONs) were found for the ODH of activated alcohols, which indicates that the additional OH units inherent to Ia do not contribute particularly to the activity of this complex, for instance, through prebinding of the alcohol. 2) On dissolution II enters into an equilibrium with a monomeric form, which is the predominant species in solution; nevertheless, ODH proceeds exclusively at the dimeric form, and this stresses the need for cooperation of two vanadium centres. 3) By omitting O(2) from the system during the oxidation of 9-fluorenol, the reduced form of the catalyst could be isolated and fully characterised (including single-crystal X-ray analysis). The corresponding intermediate had been elusive in case of thiacalixarene system Ia. 4) Reoxidation was found to proceed via a peroxide intermediate that also oxidises one alcohol equivalent. As the peroxide can also perform mono- and dioxygenation of the thioether group in II, after a number of turnovers the active catalyst contains a sulfone group. The reduced form of this ultimate catalyst was also isolated and structurally characterised. Possible implications of 1)-4) for the function of heterogeneous vanadia catalysts are discussed.     

Osmium pyme complexes for fast hydrogenation and asymmetric transfer hydrogenation of ketones

The osmium compound trans,cis-[OsCl2(PPh3)2(Pyme)] (1) (Pyme=1-(pyridin-2-yl)methanamine), obtained from [OsCl2(PPh3)3] and Pyme, thermally isomerizes to cis,cis-[OsCl2(PPh3)(2)(Pyme)] (2) in mesitylene at 150 degrees C. Reaction of [OsCl2(PPh3)3] with Ph2P(CH2)(4)PPh2 (dppb) and Pyme in mesitylene (150 degrees C, 4 h) leads to a mixture of trans-[OsCl2(dppb)(Pyme)] (3) and cis-[OsCl2(dppb)(Pyme)] (4) in about an 1:3 molar ratio. The complex trans-[OsCl2(dppb)(Pyet)] (5) (Pyet=2-(pyridin-2-yl)ethanamine) is formed by reaction of [OsCl2(PPh3)3] with dppb and Pyet in toluene at reflux. Compounds 1, 2, 5 and the mixture of isomers 3/4 efficiently catalyze the transfer hydrogenation (TH) of different ketones in refluxing 2-propanol and in the presence of NaOiPr (2.0 mol %). Interestingly, 3/4 has been proven to reduce different ketones (even bulky) by means of TH with a remarkably high turnover frequency (TOF up to 5.7 x 10(5) h(-1)) and at very low loading (0.05-0.001 mol %). The system 3/4 also efficiently catalyzes the hydrogenation of many ketones (H2, 5.0 atm) in ethanol with KOtBu (2.0 mol %) at 70 degrees C (TOF up to 1.5 x 10(4) h(-1)). The in-situ-generated catalysts prepared by the reaction of [OsCl2(PPh3)3] with Josiphos diphosphanes and (+/-)-1-alkyl-substituted Pyme ligands, promote the enantioselective TH of different ketones with 91-96 % ee (ee=enantiomeric excess) and with a TOF of up to 1.9 x 10(4) h(-1) at 60 degrees C.     

From esters to alcohols and back with ruthenium and osmium catalysts

There and back again: hydrogenation of esters and the reverse reaction of dehydrogenative coupling of alcohols are efficiently catalyzed by dimeric complexes of Ru and Os under neutral conditions. The Os dimer is an outstanding catalyst for the hydrogenation of alkenoates and triglycerides, and allows production of fatty alcohols from olive oil. This complex converts ethanol into ethyl acetate and hydrogen under reflux.     

Protic NNN and NCN Pincer‐Type Ruthenium Complexes Featuring (Trifluoromethyl)pyrazole Arms: Synthesis and Application to Catalytic Hydrogen Evolution from Formic Acid

NNN and NCN pincer‐type ruthenium(II) complexes featuring two protic pyrazol‐3‐yl arms with a trifluoromethyl (CF₃) group at the 5‐position were synthesized and structurally characterized to evaluate the impact of the substitution on the properties and catalysis. The increased Brønsted acidity by the highly electron‐withdrawing CF₃ pendants was demonstrated by protonation–deprotonation experiments. By contrast, the IR spectra of the carbonyl derivatives as well as the cyclic voltammogram indicated that the electron density of the ruthenium atom is negligibly influenced by the CF₃ group. Catalysis of these complexes in the decomposition of formic acid to dihydrogen and carbon dioxide was also examined. The NNN pincer‐type complex 1 a with the CF₃ group exhibited a higher catalytic activity than the tBu‐substituted analogue 1 b . In addition, the bis(CF₃‐pyrazolato) ammine derivative 4 catalyzed the reaction even in the absence of base additives.     

Novel cyclohexyl‐based aminophosphine ligands and use of their Ru(II) complexes in transfer hydrogenation of ketones

Two new aminophosphines – furfuryl‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃O] ( 1 ) and thiophene‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃S] ( 2 ) – were prepared by the reaction of chlorodicyclohexylphosphine with furfurylamine and thiophene‐2‐methylamine. Reaction of the aminophosphines with [Ru(η⁶‐p‐cymene)(μ‐Cl)Cl]₂ or [Ru(η⁶‐benzene)(μ‐Cl)Cl]₂ gave corresponding complexes [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐p‐cymene)Cl₂] ( 1a ), [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐benzene)Cl₂] ( 1b ), [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐p‐cymene)Cl₂] ( 2a ) and [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] ( 2b ), respectively, which are suitable catalyst precursors for the transfer hydrogenation of ketones. In particular, [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] acts as a good catalyst, giving the corresponding alcohols in 98–99% yield in 30 min at 82 °C (up to time of flight ≤ 588 h^?1). Copyright © 2014 John Wiley & Sons, Ltd.     

Ru/g-al2o3 as reusable catalyst for dehydrogenation of alcohols without hydrogen acceptor

Summary Ru/g-Al₂O₃ catalyzed the dehydrogenation of alcohols to carbonyl compounds without employing hydrogen acceptor. The catalyst was readily recovered from the reaction mixture and could be reused.