The fabrication of polymer dispersed liquid crystal based on SiO2 photonic crystal template

The conductance of polymer matrix is an important factor for the property of the polymer dispersed liquid crystal (PDLC). The nanographites are dispersed into the polymer matrix for optimising the dielectric conductive property. The synthesised nanoparticles SiO₂ was used as photonic crystal (PC) to work as a template for fabricating PDLC films. A mixture of pre-polymer and liquid crystals (LCs) was infiltrated into the void of the PC and polymerised under ultraviolet light. The void of the PC made uniform the dispersion of the liquid crystals in the films. The optical property of the PDLC films was optimised by doped nanographites and negative charge SiO₂ template. The effect of negative charge SiO₂ and nanographites on the threshold voltage and driving voltage was researched. The morphology of the PDLC films was studied by the FTIR image. The dispersed LCs droplets were uniformly affected by the addition of the nanographites. The LCs droplets dispersed in the polymer were located in the void of the SiO₂ photonic crystal.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

Fabrication of dye-doped polymer-dispersed liquid crystals with low driving voltage based on nucleophile-initiated thiol-ene click reaction

Dye-doped polymer-dispersed liquid crystal (PDLC) is an attractive material for application in smart windows. We report a novel dye-doped PDLC system with low driving voltage (V_dr) fabricated by nucleophile-initiated thiol-ene click reaction for the first time. The V_dr decreased significantly with the addition of monofunctional monomer. The influences of reaction temperature on the electro-optical properties of PDLC are also investigated in this work.     

Effects of thiol monomers on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Nucleophile-initiated thiol-ene click reaction is a highly novel and efficient method of preparing polymer-dispersed liquid crystal (PDLC) films. The effects of thiol monomers on the electro-optical properties of PDLC films prepared by nucleophile-initiated thiol-ene click reaction were investigated in this work. The thiol monomers were dithiol, trithiol, tetrathiol or their mixture. It was found that the increase of functionality could lead to the increase of threshold voltage and saturation voltage and the decrease of off-state transmittance. The influence of reaction temperature was also investigated. The results indicated that functionality and reaction temperature had combined effects on the electro-optical properties of PDLC films.     

Influence of chain length of prepolymers in permanent memory effect of PDLC assessed by solid-state NMR

ABSTRACT

The relationship between linear chain (ethylene oxide units) length of polymerisable monomers with morphology, electro-optical properties and ¹³C nuclear magnetic resonance (NMR) spectroscopy of the corresponding polymer-dispersed liquid crystal (PDLC) films was investigated. The preferred liquid crystal molecule alignment and permanent memory effect of PDLC were greatly influenced by the length of the molecular chain of prepolymers to be incorporated as a polymer matrix. By increasing the number of ethylene oxide in prepolymer chain and maintaining the number of functionalities (polymerisable groups in each monomer molecule), the permanent memory effect of PDLC increased, as proved by solid-state ¹³C NMR spectroscopy.     

Facile fabrication of polymer-dispersed liquid crystal films via nucleophile-initiated thiol-ene click reaction

Nucleophile-initiated thiol-ene click reaction was employed to prepare polymer-dispersed liquid crystal (PDLC) films initiated by 4-dimethylaminopyridine (DMAP). The PDLC films were prepared in different temperature. It is found that the reaction temperature has a big influence on the electro-optical properties of PDLC films and 60°C is the optimal temperature to fabricate PDLC film which has high ON state transmittance (T_on) and low OFF state transmittance (T_off). UV-Visible spectrophotometer, scanning electron microscopy and polarised optical microscope were employed to explore the obtained PDLC films. Nucleophile-initiated thiol-ene click reaction, without UV-light, probably provides a new pathway to prepare PDLC films.     

Enhancement of frequency modulation response time for polymer-dispersed liquid crystal

Through the ferroelectric nanoparticles of BaTiO₃ (BTO) doping, the response time for the frequency modulation of the polymer-dispersed liquid crystal (PDLC) was improved. The BTO-doped PDLC cells were prepared by polymerisation induced phase separation (PIPS) process using UV light. The capacitance of the PDLC composites was measured with an impedance analyzer in the frequency range of 100 Hz–1 MHz at 1 V. The dynamic signal for the response time of the PDLC devices was monitored through a digital oscilloscope. The electro-optical properties of the PDLC were found to strongly depend on the doped BTO concentration. The BTO doping caused a large increase in the capacitance. The dielectric constants were drastically decreased in the samples with rather low BTO doping ratio at a high frequency. No outstanding difference in the rising time of the LC was observed in the BTO-doped PDLC device, but the falling time was significantly decreased from 0.334 to 0.094 s. The present results imply that the nanoparticle-doping technology could improve the electro-optical performance of the PDLC requiring fast response and frequency modulation, such as optical modulators and PDLC-hybrid electroluminescence device for flexible electronic devices.     

Impact of silica nanoparticles dispersion on the dielectric and electro-optical properties and absorption spectra of host ferroelectric liquid crystal

The present work concerns with the investigation of the effect of dispersion of Silica (SiO₂) nanoparticles (NPs) in host ferroelectric liquid crystal (FLC) KCFLC10S on the dielectric and electro-optical properties and ultraviolet-visible (UV-VIS) absorption spectra of the pristine and dispersed systems. We have found that the dispersion of SiO₂ NPs in the host FLC strongly influences the various properties of dispersed systems. No evidence of aggregates and clumps in the dispersed system has been observed. Due to SiO₂ NPs dispersion, a rapid decrease in dielectric permittivity ε’, increase in conductivity σ with frequency, increase in spontaneous polarisation P_s and decrease in switching time with bias voltage have been observed. Based on the absorption spectra, we have also made an attempt to link the electro-optical and dielectric response with the mechanism of FLC–NPs interactions.     

Thermal and electro-optical properties of cerium-oxide-doped liquid-crystal devices

Doping with cerium (IV) oxide (CeO₂) nanoparticles can significantly enhance the thermal stability and electro-optical (EO) properties of nematic liquid crystal (NLC) systems. Thermal stability was improved without aggregation and reduction of transmittance by adding CeO₂ nanoparticles in a liquid crystal medium. In particular, the EO properties greatly improved in CeO₂-dispersed NLC cells. The threshold voltage reduced from 3.027 to 2.279 V and the response time decreased from 13.097 to 9.970 ms with increased CeO₂ nanoparticles in the NLC cells. The improved properties of liquid crystals doped with CeO₂ nanoparticles depend on the anchoring energy and the electric field of the CeO₂-dispersed liquid crystal displays.     

Digital optical memory devices based on polymer-dispersed liquid crystals films: appropriate polymer matrix morphology

ABSTRACT

Permanent memory effect (PME) in polymer dispersed liquid crystal (PDLC) allows a greater applicability range than traditional PDLCs. One of the most interesting application could be the possible storing of optical information, the so-called Digital Optical Memory (DOM) devices. To test this application it would be required a display structure having an array of pixels addresses. Each pixel was filled with PDLC film with PME and electric field can be independently applied to different PDLC elements to define on/off pixel states (transparent or scattering states).PDLC films were obtained from a mixture of E7 nematic liquid crystal and poly(ethylene glycol) dimethacrylate with 875 g mol^-1oligomer as precursor of the polymeric matrix. The effect of the curing temperature and the UV light intensity as well time exposure during the polymerisations on the electro-optical performance of PDLC films were investigated. In this way, a high transparency state (T_OFF=55%) for a long period of time at room temperature even after the applied voltage has been switched off were obtained, started from an opaque state (T₀=0%) and after reaching a transparent state (T_MAX=75%), which causes 73% PME. The application to an 8x8 passive matrix using PDLC with PME is also demonstrated as proof-of-principle.     

Effects of silver nanoparticle doping on the electro-optical properties of polymer stabilized liquid crystal devices

ABSTRACT

Polymer stabilised liquid crystal (PSLC) devices are widely used in various smart light modulation occasions. Their electro-optical properties can still be improved to address future challenges. It is well known that doping liquid crystal (LC) materials with nanoparticles can change the material’s electro-optical performance. In this study, silver nanoparticles (AgNPs) with size about 15–20 nm and surfactant were doped into PSLC devices. The effects of AgNPs doping on the PSLC electro-optical performances were studied. The result shows that AgNPs and surfactant doping can increase the dielectric anisotropy of LC mixture. PSLC devices with AgNPs doping have lower driving voltage and response time than un-doped PSLC devices. Therefore, doping of a specific concentration of AgNPs resulted in PSLC devices with improved electro-optical performance.     

Highly transparent memory states in polymer dispersed liquid crystal films

Abstract

Electro-optical properties of polymer dispersed liquid crystal (PDLC) films which have reversed morphology are investigated. Highly transparent memory states, for which transmittances exceed more than 80 per cent, are observed in these PDLC films. The saturation voltage V ₉₀ can be decreased by a PTF (a phase transition with a field) operation and becomes 10 times lower than that without PTF operation. A contrast ratio of more than 600 is obtained in the memory state of a thick PDLC film.     

The electro-optical properties of 'charged' PDLCs

The application of high intensity electric fields to polymer dispersed liquid crystal (PDLC) films can induce changes in their electro-optical properties and morphology. In particular, a quasilinear electro-optical response to an external electric field can be achieved if an internal built-in d.c. field is induced. In this work, we show how the liquid crystal/polymer weight ratio influences the electro-optical response of 'charged' PDLCs, i.e. of PDLC films after the application of a high intensity electric field. We observed that a quasilinear electro-optical response can be achieved in a well determined range of composition. Larger liquid crystal concentrations are unable to maintain the built-in field, while PDLCs with lower liquid crystal loadings do not allow the onset of a built-in d.c. field.     

A novel polymer dispersed liquid crystal film prepared by reversible addition fragmentation chain transfer polymerization

Polymer as an important component of polymer dispersed liquid crystal (PDLC) has a great influence on electro-optical properties. In this letter, the effect of molecular weight of polymer matrix on the electro-optical properties of PDLC films was investigated with reversible addition fragmentation transfer (RAFT) polymerization. It was found that the saturation voltage and memory effect were apparently influenced by molecular weight of polymer which can be regulated efficiently by irradiation time, while the morphology of liquid crystal droplets kept unaltered. It was estimated that the increase of molecular weight of polymer enhanced entanglement between polymer and liquid crystal, which induced the different surface interaction and electro-optical properties.     

The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

The investigation of molecular affinity involved in poly(ethylene glycol)-based polymer-dispersed liquid crystal display

Acrylic polyethylene glycol(PEG)-based polymer-dispersed liquid crystal (PDLC) films have been fabricated to investigate the effect of intermolecular interactions on PDLC performance. For this purpose, the amphiphilic liquid crystal and polymers are selected as PDLC composite materials. The acrylic PEG contents are varied from 0 to 66.66 mol wt.% in order to understand the effects of different levels of additions on the microstructure and electro-optical properties of the PDLC films. For this intention, polarized optical microscopy and UV–vis spectroscopy are used. The extent of phase separation and anchoring energy are also examined using Fourier transform infrared (FTIR) spectroscopy and contact angle measurements in consequence of acrylic PEG addition. The contrast ratio, threshold voltage, as well as saturation voltage, tended to increase with the addition of acrylic PEG. The molecular affinity involved in the polymer matrix and LC molecules affected the phase separation which is responsible for the formation of domain size; this accordingly changed the electro-optical properties of PDLC film.     

紫外光固化PDLC膜的形态及电光性能

选用紫外光固化法制备了聚合物分散液晶（ＰＤＬＣ）膜，以ＳＬＭ方法对其形态结构进行了考察，进而测试了ＰＤＬＣ的电光性能，并讨论了性能与结构的关系。     

The physical properties of alkene-terminated liquid crystal molecules/E8 mixture and the electro-optical properties as they doped in polymer-dispersed liquid crystal systems

Effects of the content of fluorinated alkene-terminated liquid crystal (LC) molecules on the physical properties of the fluorinated alkene-terminated LC/E8 mixture were studied. The morphology and electro-optical properties as they doped in polymer-dispersed liquid crystal (PDLC) films were investigated. The detailed discussion of the obtained results is given. As a result, comparing with the physical properties of the series of LC mixtures with the same content of the analogous fully saturated compounds doped with E8, we find that the birefringence is significantly larger for the LC mixture with the alkene-terminated materials. Both fluorinated alkene-terminated LC molecules and the analogous fully saturated compounds doped with E8 reduce the driving voltage of PDLC films. Moreover, PDLC films with the fluorinated alkene-terminated LC molecules possessed higher contrast ratio and faster response time than that of the PDLC films prepared by adding the same mass fraction of the analogous fully saturated compounds. Thus, the ability to manipulate physical properties of LC mixture and electro-optical properties of PDLC films by changing the LC molecular structures may have future relevance for new LC structures design and applications of PDLC films.