Digital optical memory devices based on polymer-dispersed liquid crystals films: appropriate polymer matrix morphology

ABSTRACT

Permanent memory effect (PME) in polymer dispersed liquid crystal (PDLC) allows a greater applicability range than traditional PDLCs. One of the most interesting application could be the possible storing of optical information, the so-called Digital Optical Memory (DOM) devices. To test this application it would be required a display structure having an array of pixels addresses. Each pixel was filled with PDLC film with PME and electric field can be independently applied to different PDLC elements to define on/off pixel states (transparent or scattering states).PDLC films were obtained from a mixture of E7 nematic liquid crystal and poly(ethylene glycol) dimethacrylate with 875 g mol^-1oligomer as precursor of the polymeric matrix. The effect of the curing temperature and the UV light intensity as well time exposure during the polymerisations on the electro-optical performance of PDLC films were investigated. In this way, a high transparency state (T_OFF=55%) for a long period of time at room temperature even after the applied voltage has been switched off were obtained, started from an opaque state (T₀=0%) and after reaching a transparent state (T_MAX=75%), which causes 73% PME. The application to an 8x8 passive matrix using PDLC with PME is also demonstrated as proof-of-principle.     

Synthesis and characterisation of some new chalcone liquid crystals

A series of new chalcones with four aromatic rings is synthesised and characterised. The chemical structures of chalcones are evaluated by Fourier transform-infrared spectroscopy, elemental analysis, ¹H and ¹³C nuclear magnetic resonance spectroscopic techniques. The compounds were investigated for liquid crystalline properties using differential scanning calorimetry and polarising optical microscopy with hot stage. The results indicate that the formation of mesophase type is dependent on the alkyl chain length at one end of the molecule. Compounds 9a–d with relatively shorter chains show SmA and nematic mesophases, whereas 9e–g exhibit SmC and SmA mesophases. Compound 9h having a cyano group at one end, exhibit SmA and nematic mesophases.     

Synthesis of new monodendrons,gallic acid derivatives,self- assembled in a columnar phase

This article describes the synthesis and liquid crystal properties of new compounds that are derived from gallic acid. All the compounds were characterised by ¹H and ¹³C nuclear magnetic resonance spectroscopy (¹H NMR and ¹³C NMR), Infrared spectroscopy (IR) and Elemental analysis (CHN). The mesophases of these compounds were characterised using polarising optical microscopy (POM), differential scanning calorimetry (DSC) and SAXS measurements. The morphology of the surface of the films was investigated using atomic force microscopy (AFM). Compounds 9 and 13, which remain in a supercooled state until room temperature, do not exhibit liquid crystalline behaviour. The other compounds (i.e., 5, 7 and 8) self-assemble into tubular supramolecular architectures generating hexagonal columnar (Col_h) mesophases, which was confirmed by SAXS measurements.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

Synthesis,regioisomerism and characterization of unsymmetrical alkenyl-terminated isoxazole liquid crystals

Two series of unsymmetrical diphenyl-1,3-diketones, each species bearing one terminal alkene, have been synthesized. These diketones have been converted into their respective unsymmetrical diphenylisoxazoles [3(5)-(4-ω-alkenyloxyphenyl)-5(3)-(4-alkoxyphenyl)isoxazoles] which have been isolated as equal mixtures of two regioisomers, due to 3,5- and 5,3-substitution of the isoxazole ring. The mesogenic properties of the isoxazole liquid crystals have been studied by polarizing optical microscopy and DSC. The effect of increasing alkoxy chain length (C6-C10) on the properties of the two series of isoxazoles has been examined. The isoxazoles show enantiotropic smectic C, smectic A and nematic mesophases. A detailed ¹H and ¹³C NMR spectroscopic study has examined both the 1,3-diketones and isoxazoles. Proximity of the terminal alkene to the diphenyl core can greatly affect the complexity of the ¹³C NMR spectra.     

An electrically light-transmittance-switchable film with a low driving voltage based on liquid crystal/polymer composites

ABSTRACT

As a typical class of electrically light-transmittance-switchable (ELTS) composites materials, polymer dispersed liquid crystal (PDLC) films have been widely used in displays, smart windows, light shutters, etc. However, the commercialised PDLC film still requires a comparatively high voltage to maintain its transparent state, leading to huge power consumption and even a potential safety risk. In this regard, we proposed a ‘heat followed UV’ stepwise polymerisation strategy for preparing a kind of ELTS film with a low driving voltage (~20.7 V) through constructing a coexistent system of polymer dispersed and polymer stabilised liquid crystal (PD&SLC). In this new PD&SLC system, vertically orientated polymer networks were formed within LC domains to induce the vertical alignment of LC, thereby reducing the driving voltage. Also, the as-made PD&SLC film exhibited good flexibility due to the high content of polymer. Moreover, the effects of the liquid crystalline polymerisable monomers content on the polymer morphologies as well as the electro-optical properties of the as-made PD&SLC films were elaborately investigated.     

Effects of the structures of polymerizable monomers on the electro‐optical properties of UV cured polymer dispersed liquid crystal films

Polymer dispersed liquid crystal (PDLC) films were prepared by photopolymerization of liquid crystal (LC)/polymerizable monomers/photoinitiator composites. The effects of the structures of the polymerizable monomers on the electro‐optical properties of PDLC films were investigated. It was found that the length of the molecular chain and the rigidity and flexibility of molecules influenced the structure of the polymer network in the PDLC films somewhat, and then affected the electro‐optical properties of the composites accordingly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1369–1375, 2008     

Microwave-assisted synthesis of novel mixed tail rufigallol derivatives

Microwave-assisted syntheses of five new series of rufigallol-based mesogens are reported with branched alkyl chains at the peripheral positions. The chemical structures of these newly synthesised compounds were determined by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, infrared spectroscopy, ultraviolet spectroscopy and elemental analysis. The thermotropic liquid crystalline properties were investigated by polarising optical microscopy (POM), differential scanning calorimetry and X-ray diffractometry. Most of the derivatives were found to be liquid crystalline over a wide temperature range.     

Ionic discotic liquid crystals: synthesis and characterization of pyridinium bromides containing a triphenylene core

Five novel pyridinium salts tethered with hexaalkoxytriphenylene molecules were synthesized by the quaternization of pyridine with ω-bromo-substituted triphenylene derivatives. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based pyridinium salts with bromide as counterion were found to be mesomorphic over a wide temperature range.     

Synthesis and crosslinking of vinyl‐terminated biphenyl and naphthalene liquid‐crystalline poly(epichlorohydrin) derivatives: Effect of nonmesogenic nonvinylic units on the mesogenic properties

Two series of vinyl‐terminated side‐chain liquid‐crystalline polyethers containing ethylene oxide or glycidyl aromatic carboxylates as spacers were synthesized. The mesogenic cores were 4,4′‐biphenyl or 2,6‐naphthalene moieties. The polymers were synthesized by chemically modifying poly(epichlorohydrin) or poly(epichlorohydrin)‐poly(ethylene oxide) with the corresponding mesogenic carboxylic acids or with mixtures of these acids and the nonmesogenic non‐crosslinkable analogous 4‐biphenyl‐ and 2‐naphthalenecarboxylic acids. In most cases the degree of modification achieved was higher than 90%. The polymers were characterized by chlorine analysis, IR, and ¹H and ¹³C NMR spectroscopies; viscosimetry; size exclusion chromatography; multi‐angle laser light scattering; and thermogravimetric analysis. The liquid‐crystal behavior, shown by most polymers, was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators that led to liquid‐crystal thermosets or elastomers. The freezing of the mesophase organization on the crosslinked materials was confirmed by POM and X‐ray diffraction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3893–3908, 2002     

Effects of chemical structure and composition of the polymer matrix on the morphology and electro-optical performance of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) systems on the basis of nematic liquid crystal E7 and amphiphilic binary copolymers of acrylic acid (AA) with such acrylates as 2-ethylhexyl acrylate (EHA), n-butyl acrylate (BA), and methyl acrylate (MA) are investigated. It is shown that the liquid crystal (LC) drops in the copolymer EHA–AA have submicrometre sizes, and their dependence on the composition of the photo-curable monomer mixture is described by a parabolic curve. The highly oriented domain structure in the same system is first revealed when electric field is applied. The threshold voltage for all systems begins to increase with some critical composition of a monomer mixture in which the longer the hydrocarbonic radical in an acrylate molecule, the higher the content of AA. The PDLC system based on the BA–AA copolymer with 30 wt% LC exhibits the least value of the driving voltage, 1 V μm^–1, and the lowest memory effect.     

Block copolymers prepared by emulsion polymerization with poly(ethylene oxide)–azo-initiators

Poly(ethylene oxide)-b-poly(styrene) block copolymers were prepared in the form of latex particles by emulsion polymerization of styrene with poly(ethylene glycol)–azo-initiators as well as with the redox initiation system poly(ethylene glycol)/Ce⁴⁺. The emulsion polymerization can be carried out in the absence of additional stabilizers if the chain length of the poly(ethylene glycol) is greater than 40. The latex particles as well as the copolymers were characterized by capillary hydrodynamic fractionation, ¹³C-nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared spectroscopy. By ¹³C-NMR spectroscopy a side reaction of the primary radicals arising from the azo-initiator was found which can contribute to the low efficiency of azo-initiators in emulsion polymerization.     

The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

Measurement of Large Dipolar Couplings of a Liquid Crystal with Terminal Phenyl Rings and Estimation of the Order Parameters

NMR spectroscopy is a powerful means of studying liquid‐crystalline systems at atomic resolutions. Of the many parameters that can provide information on the dynamics and order of the systems, ¹H–¹³C dipolar couplings are an important means of obtaining such information. Depending on the details of the molecular structure and the magnitude of the order parameters, the dipolar couplings can vary over a wide range of values. Thus the method employed to estimate the dipolar couplings should be capable of estimating both large and small dipolar couplings at the same time. For this purpose, we consider here a two‐dimensional NMR experiment that works similar to the insensitive nuclei enhanced by polarization transfer (INEPT) experiment in solution. With the incorporation of a modification proposed earlier for experiments with low radio frequency power, the scheme is observed to enable a wide range of dipolar couplings to be estimated at the same time. We utilized this approach to obtain dipolar couplings in a liquid crystal with phenyl rings attached to either end of the molecule, and estimated its local order parameters.     

Synthesis and characterization of novel imidazolium-based ionic discotic liquid crystals with a triphenylene moiety

Two novel triphenylene-tethered imidazolium salts were synthesized either by the quaternization of 1-methylimidazole with an ω-bromo-substituted triphenylene or by the quaternization of a triphenylene-substituted imidazole with methyl iodide. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based imidazolium salts with bromide or iodide as counterion show columnar mesophase properties over a wide temperature range.     

Synthesis,characterisation and liquid crystal properties of 2,5‐bis[5‐alkyl(alkoxy)phenyl‐1,3,4‐oxadiazole]bromobenzenes

A series of new thermal bilateral liquid crystal compounds with the phenylenebis‐1,3,4‐oxadiazole structure was synthesised. The molecular structures of the oxadiazole compounds were confirmed by FT‐IR and ¹H NMR spectroscopy, elemental analysis and mass spectrometry. Thermogravimetric analysis indicates that the compounds in an atmosphere of nitrogen have good thermal stability. Measurements using differential scanning calorimetry, polarising optical microscopy and temperature‐dependent wide‐angle X‐ray diffraction indicated that the liquid crystalline properties are related to the length of the end groups. When the end group was tert‐butyl or alkoxy with four and six carbons, the compounds exhibit no liquid crystal phase. However, compounds with end groups containing more than eight carbons show significant bidirectional thermally‐induced liquid crystal properties and the structure of the liquid crystal phase is the lamellar smectic A phase. All the compounds exhibit blue fluorescence.     

PDLC composites based on polyvinyl boric acid matrix – a promising pathway towards biomedical engineering

ABSTRACT

Polymer dispersed liquid crystal (PDLC) systems based on a smectic liquid crystal embedded in polyvinylalcohol-boric acid (PVAB) as biocompatible carrying matrix were prepared and characterised. The smectic liquid crystal contains biologically friendly structural blocks and was designed to have a direct isotropic–smectic transition and a mesophase stability range at human body temperature. The resulted PDLCs were characterised from morphological and thermotropic aspects by polarised light microscopy (POM), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and Raman microspectroscopy, and their surface properties were determined by contact angle measurements and surface energy calculations.

It was concluded that the electron-deficient PVAB matrix constrains the ester liquid crystal to grow as spherical droplets with planar anchoring. The droplet diameter was comprised in the range 4–11 µm, with a predominant droplet population around 7 µm and a narrower polydispersity as the amount of the liquid crystal in the polymeric matrix increases. The resulted PDLC films exhibited versatile morphology and surface properties which allow targeting of their application.     

The structure of acrolein in a liquid crystal phase

The (1)H NMR spectrum of a sample of acrolein dissolved in the nematic liquid crystal phase I52 has been analysed to yield 18 dipolar couplings between all the magnetic nuclei in the molecule; moreover, the (13)C and (13)C{(1)H} NMR spectra of a sample of acrolein in CDCl(3) were recorded and analysed to determine the indirect J(ij) couplings. The data were used to obtain the relative positions of the carbon and hydrogen atoms, assuming that these are independent of the conformations generated by rotation around the C--C bond through an angle phi, and to obtain a probability distribution P(phi). It has been found that in the liquid phase, the distribution is a maximum at the trans form whereas the abundance of the cis form is significantly smaller compared with that found by microwave spectroscopy or high level quantum mechanical calculations. Such calculations produced also a suitable force field needed to develop suitable strategies for vibrational correction procedure in the case of flexible molecules.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.