Photopolymerisation kinetics and electro-optical properties in mixtures of dichroic dye-doped nematic liquid crystal and photocurable polymer

This work reports the effect of dye on the photopolymerisation and electro-optical properties of polymer dispersed liquid crystal (PDLC) composite films. Dichroic PDLC (DPDLC) films based on a photocurable polymer and nematic liquid crystal (LC) with an azo dichroic dye were prepared by photopolymerisation-induced phase separation method. Polarising optical microscopy has been used for monitoring the phase separation kinetics and two-phase morphology evolution in the DPDLC system. LC domains with radial structures during initial period of phase separation adopted a resultant morphology of bipolar configuration over the course of polymerisation. The phase separation and morphology of LC domains was found to be dependent on the amount of dye used. Moreover, the addition of small amount of dye reduced the switching voltage, and enhanced the contrast ratio with improved switching time in the PDLC films. It was shown that, under the application of an electric field, the molecular orientation and absorbance of dichroic dye can be controlled in DPDLC to induce non-linearity and colour contrast without the use of polarisers.     

Smectic layer structure of ferroelectric liquid crystal formed between fine polymer fibres

This paper describes the alignment of ferroelectric liquid crystal (FLC) structures formed between aligned polymer fibres, where the FLC smectic layers are determined by polarising microscopy and X-ray diffraction. The FLC/polymer composite films were formed from a nematic phase FLC/monomer solution using a photopolymerisation-induced phase separation method. It was found that bending of the FLC smectic layers was induced in both the film plane and the cross-sectional plane at the phase transition from smectic A to chiral smectic C of the FLC material. The light transmittance properties of the composite film between crossed polarizers was analysed by light propagation simulation in several optical anisotropic media, based on the evaluated smectic layer model.     

The investigation of molecular affinity involved in poly(ethylene glycol)-based polymer-dispersed liquid crystal display

Acrylic polyethylene glycol(PEG)-based polymer-dispersed liquid crystal (PDLC) films have been fabricated to investigate the effect of intermolecular interactions on PDLC performance. For this purpose, the amphiphilic liquid crystal and polymers are selected as PDLC composite materials. The acrylic PEG contents are varied from 0 to 66.66 mol wt.% in order to understand the effects of different levels of additions on the microstructure and electro-optical properties of the PDLC films. For this intention, polarized optical microscopy and UV–vis spectroscopy are used. The extent of phase separation and anchoring energy are also examined using Fourier transform infrared (FTIR) spectroscopy and contact angle measurements in consequence of acrylic PEG addition. The contrast ratio, threshold voltage, as well as saturation voltage, tended to increase with the addition of acrylic PEG. The molecular affinity involved in the polymer matrix and LC molecules affected the phase separation which is responsible for the formation of domain size; this accordingly changed the electro-optical properties of PDLC film.     

Smectic layer structure of ferroelectric liquid crystal formed between fine polymer fibres

This paper describes the alignment of ferroelectric liquid crystal (FLC) structures formed between aligned polymer fibres, where the FLC smectic layers are determined by polarising microscopy and X-ray diffraction. The FLC/polymer composite films were formed from a nematic phase FLC/monomer solution using a photopolymerisation-induced phase separation method. It was found that bending of the FLC smectic layers was induced in both the film plane and the cross-sectional plane at the phase transition from smectic A to chiral smectic C of the FLC material. The light transmittance properties of the composite film between crossed polarizers was analysed by light propagation simulation in several optical anisotropic media, based on the evaluated smectic layer model.     

Liquid Crystal-Polymer Composite Materials

Polymer dispersed liquid crystal (PDLC) films can be switched electrically from a light-scattering off-state to a highly transparent on-state. Thin films were prepared via a polymerization-induced phase separation process, using electron beam radiation. The liquid crystal (LC)/polymer materials were obtained from blends of an eutectic nematie mixture E7 and a polyester acrylate-based polymer precursor. The optical and electro-optical properties of the PDLC films obtained depend strongly on the LC concentration. The LC solubility limit in the polymer matrix and the fractional amount of LC contained in the droplets were determined by means of calorimetrie measurements.     

Complex study of reorientational dynamics of the liquid crystal in PDLC films

Morphological, electro-optical and switching properties of polyester resin/nematic liquid crystal composite films have been studied for varying composition (10-40 wt% of LC), temperature (20-50 C), film thickness (10-75 mum) and UV curing time of the matrix (0.25-12 min). The PDLC films were formed by LC separation in a UV polymerization process of the thin layer of oligoester resin (liquid crystal mixture) between ITO coated glass plates. The electro-optical and response behaviour based on the electric field controlled light scattering of the composite films was observed. The results were interpreted in terms of effective anchoring strength at the interface of the polymer and liquid crystal depending either on the area fraction of the interface in the composite film (dependent on the size and shape of the liquid crystal droplets) or the stiffness and resistivity of the polyester resin changing in the course of the crosslinking polymerization.     

High-diffraction-efficiency Fresnel lens based on annealed blue-phase liquid crystal–polymer composite

We demonstrated a relatively simple and effective method to fabricate a periodically isolated polymer wall of blue-phase liquid crystal Fresnel lens (BPLCFL) by employing a single-masking process of the ultraviolet (UV) irradiation, leading to excellent photopolymerisation-induced phase separation between blue -phase liquid crystal (BPLC) molecules and UV-curable monomers. Nevertheless, some uncured monomers would inherently reside in the BPLC-rich area and slightly inhibit the BPLC molecules realigned under the external electric field. To enhance the optical properties of the polymer-wall BPLCFL considerably, a novel technique for fabricating a pure BPLC zone is proposed that successfully expels the residual monomers from the BPLC volume using a thermal annealing process. Experimental results show that the maximum diffraction efficiency reaches ~36%, which approaches the theoretical limit of ~41%. Consequently, the annealing technique to purify phase-separated composite films has a strong potential to construct the BPLCFL in light of polarisation-free applications.     

紫外光固化PDLC膜的形态及电光性能

选用紫外光固化法制备了聚合物分散液晶（ＰＤＬＣ）膜，以ＳＬＭ方法对其形态结构进行了考察，进而测试了ＰＤＬＣ的电光性能，并讨论了性能与结构的关系。     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

The effect of the resultant microphase-separated structures of polymer matrices on the electro-optical properties of polymer dispersed liquid crystal films by Iniferter polymerization

Iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films and an additional photoinitiator was introduced to induce the phase separation of polymer matrices themselves on the process of preparing the PDLC. The effect of the polymerization kinetics and the resultant microphase-separated structures of polymer matrices on the electro-optical properties of PDLC films were studied. It was found that the bigger length scale of phase separation of polymer matrices induced strong light-scattering resulting in low ON-state transmittance. And faster polymerization kinetic induced higher threshold and saturation voltages.     

The electro-optical response of nematic emulsions

Switchable nematic emulsions are micron-sized droplets of nematic liquid crystal, floating in isotropic fluid matrices. Such droplets can be switched from an opaque (off) to a transparent (on) state by application of very low electric fields. It is known that the electro-optical properties of liquid crystal dispersions are affected by several parameters, including the liquid crystal loading. The electro-optical response of nematic emulsions has been investigated as a function of liquid crystal weight percentage. Almost transparent films with a reduced contrast ratio are obtained with lower liquid crystal contents. A macroscopic phase separation is observed when liquid crystal content exceeds 45 wt %. On the contrary, large contrast ratios and very low switching fields can be obtained if liquid crystal ranges from 25 to 35 wt %. Consequently, nematic emulsions prepared in this liquid crystal range can be used as promising systems for electro-optical applications. In addition to technological developments, these results can help computational and basic studies of phase separation in novel multiphase liquid crystalline materials.     

Effect of Curing Process on the Dynamic Response of Polymer Dispersed Liquid Crystal Films

Summary: The time relaxation of the optical transmission of polymer-dispersed liquid crystal films was investigated after application of an electric rectangular pulse. These films, consisting of liquid crystalline microdomains dispersed in a polymer matrix, were obtained by polymerization induced phase separation using ultraviolet and electron beam curing techniques. The effects of the curing procedure and film thickness on the transmission properties were investigated. The electro-optical response was expressed via a hierarchy of order parameters. A good agreement between the experimental data and calculated transmission values was found.     

大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

A switchable optical diffuser based on a polymer/nematic liquid crystal composite film with transient polymer balls-networks microstructure

ABSTRACT

With the increasing development of multifunction liquid crystal displays (LCDs), multifunction optical diffusers have attracted more attention. In this work, switchable optical diffusers based on the transient polymer balls-networks in polymer/nematic liquid crystal composite films have been prepared and investigated, and the effects of thiol content, curing time, LC content and photo-initiator content on the polymer microstructures and optical properties of optical diffusers are systematically studied. An optical diffuser with the transient polymer balls-networks microstructure has achieved the high transmission (96.42%), high haze (90.49%), excellent optical diffusing ability and wide viewing angle of 150° (from ?75° to 75°) on its off state. By the application of electric field of 40.0 voltage, the viewing angle of the optical diffuser turns to be narrower (from ?60° to 60°), which gives great applications in tunable viewing angle devices and other electric optical devices.     

Morphology and electro-optic responses of poly(methyl methacrylate)/nematic liquid crystal composite films: Effect of the polymer molecular weight

The director configuration, state of liquid crystal (LC) phase aggregation, and the electooptic properties of thin polymer films of poly(methyl methacrylate) (PMMA) containing nematic liquid crystal have been studied. Measurements included scanning electron micrograph (SEM), polarized optical micrographs (POM), and transmittance response of the film with the applied electric AC voltage and frequency. Two types of PMMA with significantly different molecular weight (M_w) were used, and the effects of polymer molecular weight on morphology and electro-optic properties of the composite films were examined. © 1995 John Wiley & Sons, Inc.     

固化条件对聚合物分散液晶膜电光性能的影响

选用聚乙二醇二缩水甘油醚(EGDE)/季戊四醇缩水甘油醚(PERTGE)/1,8-二氨基-3,6-二氧杂辛烷(EDBEA)/向列相液晶(SLC1717)复合体系,在不同的固化条件下,通过热聚合诱导相分离方法制备了一系列电光性能不同的聚合物分散液晶(polymer dispersed liquid crystal,简称PDLC)膜.研究了固化温度和固化时间对制备的PDLC膜中聚合物网络的微观形貌和电光性能的影响.结果表明,随着固化温度的升高以及固化时间的缩短,PDLC膜的对比度、驱动电压和开态响应时间逐渐增大,而关态响应时间逐渐减小.在固化温度为363.2 K,固化时间为7 h时,所制备的PDLC膜具有较佳的电光性能.     

An electrically controlled light-scattering device based on liquid crystal/polymer microsphere composites

ABSTRACT

There is a widely applied prospect of electrical controlled liquid crystal (LC) light-scattering device. Numerous electrical controlled LC light-scattering technologies have been studied, but each technology has its own shortcomings, such as high driving voltage, high hysteresis, complex electrode structure, and serious heating. In this work, the composite of LC and polymer microspheres are used to fabricate light-scattering devices. This device is operated by the vertical electric field and does not require complex preparation process. LC/polymer microsphere composite has the advantages of low driving voltage and zero hysteresis. The role of microspheres in the composites is to change the size and density of a refractive-index-mismatched micro-domain. The effects of the ratio, particle size, and refractive index of microspheres on the optical characteristics of a composite are studied. The normal directional light transmittance at the transparent state and light-scattering state decreases with an increasing weight ratio of microspheres. The particle size of microspheres has negligible influence on the electro-optical properties of composites when the weight ratio of microspheres is small. The LCs doped with Polymethylsilsesquioxane (PMSQ) microspheres or polymethyl methacrylate (PMMA) microspheres are compared, and the mismatched refractive index and density of micro-domain show the influence on the electro-optical properties of the composites.     

Polymer dispersed liquid crystals: relation between formulation, electro-optical properties and morphology

Polymer Dispersed Liquid Crystal (PDLC) films investigated in this work are obtained by phase separation induced by photopolymerization of a homogeneous 'prepolymer/liquid crystal' mixture. We show a close relation between the formulation/conditions of preparation of the materials, their morphology and their electro-optical properties. The effect of the mutual compatibility of the prepolymer and the liquid crystal on film performances is investigated using 'model systems' that consist of pure components. Finally, both SALS experiments and a Fourier Transform procedure lead to a simple model in which LC domains are separated by polymer walls.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.