Crystallographic report: A three‐dimensional coordination polymer: [Zn6(btc)4(4,4′‐bipy)5]n (btc = 1,2,4‐benzenetricarboxylate; 4,4′‐bipy = 4,4′‐bipyridine)

The three‐dimensional (3D) coordination polymer [Zn₆(btc)₄(4,4′‐bipy)₅]_n ( 1 ) (btc = 1,2,4‐benzenetricarboxylate; 4,4′‐bipy = 4,4′‐bipyridine) has been prepared hydrothermally. The zinc(II) centers in 1 are bridged by btc ligands to form a trinuclear subunit, which is further linked by 4,4′‐bipy and btc ligands to construct the 3D coordination architecture. Copyright © 2003 John Wiley & Sons, Ltd.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Substituted 2,2′‐Bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyl Complexes of Zinc

The condensation reaction of 2,2′‐diamino‐4,4′‐dimethyl‐6,6'‐dibromo‐1,1′‐biphenyl with 2‐hydroxybenzaldehyde as well as 5‐methoxy‐, 4‐methoxy‐, and 3‐methoxy‐2‐hydroxybenzaldehyde yields 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyl ( 1a ) as well as the 5‐, 4‐, and 3‐methoxy‐substituted derivatives 1b , 1c , and 1d , respectively. Deprotonation of substituted 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls with diethylzinc yields the corresponding substituted zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls ( 2 ) or zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyls ( 3 ). Recrystallization from a mixture of CH₂Cl₂ and methanol can lead to the formation of methanol adducts. The methanol ligands can either bind as Lewis base to the central zinc atom or as Lewis acid via a weak O–H ··· O hydrogen bridge to a phenoxide moiety. Methanol‐free complexes precipitate as dimers with central Zn₂O₂ rings.     

Polymeric di­aqua­bis­[μ4‐1,3,5‐benzenetri­carboxyl­ato(3–)](μ‐4,4′‐bi­pyridine)­trizinc(II)

The solvothermal reaction of zinc(II) acetate with 1,3,5‐benzene­tri­carboxyl­ic acid and 4,4′‐bi­pyridine in 1‐butanol and acetic acid solution gives the title complex, [Zn₃(C₉H₃O₆)₂(C₁₀H₈N₂)(H₂O)₂]_n. There are two different coordination environments for the Zn atom, namely ZnNO₂(H₂O) and ZnO₄; in the latter case, the Zn atom lies on a twofold symmetry axis. Carboxyl­ate‐bridged Zn₃(O₂C)₆ clusters are connected through 1,3,5‐benzene­tri­carboxyl­ate and 4,4′‐bi­pyridine ligands (which lie about inversion centers), yielding a three‐dimensional framework.     

A twofold interwoven two‐dimensional→two‐dimensional (2‐D→2‐D) cluster–organic network based on the [Cu2I2] cluster and the 4,4′‐(diazenediyl)dipyridine ligand: poly[[μ2‐4,4′‐(diazenediyl)dipyridine]‐μ2‐iodido‐copper(I)]

In the polymeric title compound, [CuI(C₁₀H₈N₄)]_n, the Cu^I atom is in a four‐coordinated tetrahedral geometry, formed by two I atoms and two pyridine N atoms from two different 4,4′‐(diazenediyl)dipyridine (4,4′‐azpy) ligands. Two μ₂‐I atoms link two Cu^I atoms to form a planar rhomboid [Cu₂I₂] cluster located on an inversion centre, where the distance between two Cu^I atoms is 2.7781 (15) Å and the Cu—I bond lengths are 2.6290 (13) and 2.7495 (15) Å. The bridging 4,4′‐azpy ligands connect the [Cu₂I₂] clusters into a two‐dimensional (2‐D) double‐layered grid‐like network [parallel to the (10) plane], with a (4,4)‐connected topology. Two 2‐D grid‐like networks interweave each other by long 4,4′‐azpy bridging ligands to form a dense 2‐D double‐layered network. To the best of our knowledge, this interwoven 2‐D→2‐D network is observed for the first time in [Cu₂I₂]–organic compounds.     

A threefold interpenetrated two‐dimensional zinc(II) supramolecular architecture based on 3‐nitrobenzoic acid and 4,4′‐bipyridine

With regard to crystal engineering, building block or modular assembly methodologies have shown great success in the design and construction of metal–organic coordination polymers. The critical factor for the construction of coordination polymers is the rational choice of the organic building blocks and the metal centre. The reaction of Zn(OAc)₂·2H₂O (OAc is acetate) with 3‐nitrobenzoic acid (HNBA) and 4,4′‐bipyridine (4,4′‐bipy) under hydrothermal conditions produced a two‐dimensional zinc(II) supramolecular architecture, catena‐poly[[bis(3‐nitrobenzoato‐κ²O,O′)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₇H₄NO₄)₂(C₁₀H₈N₂)]_n or [Zn(NBA)₂(4,4′‐bipy)]_n, which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction analysis. The Zn^II ions are connected by the 4,4′‐bipy ligands to form a one‐dimensional zigzag chain and the chains are decorated with anionic NBA ligands which interact further through aromatic π–π stacking interactions, expanding the structure into a threefold interpenetrated two‐dimensional supramolecular architecture. The solid‐state fluorescence analysis indicates a slight blue shift compared with pure 4,4′‐bipyridine and HNBA.     

Packing effects in 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine

Structure analyses of 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₄N₂O₂, (I), and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₂Br₂N₂, (II), reveal intermolecular hydrogen bonding in both compounds. For (I), O—H·N intermolecular hydrogen bonding leads to the formation of an infinite two‐dimensional polymer, and π stacking interactions are also observed. For (II), C—H·N intermolecular hydrogen bonding leads to the formation of a zigzag polymer. The two compounds crystallize in different crystal systems, but both mol­ecules possess C_i symmetry, with one half mol­ecule in the asymmetric unit.     

Bis(3‐amino­pyridine‐κN)(4,4′‐di­methyl‐2,2′‐bipyridine‐κ2N,N′)(per­chlorato‐κO)copper(II) per­chlorate

The title compound, [Cu(ClO₄)(C₅H₆N₂)₂(C₁₂H₁₂N₂)]ClO₄, was prepared by in situ partial ligand substitution between 3‐amino­pyridine and 4,4′‐dimethyl‐2,2′‐bipyridine at room temperature. The central copper(II) ion is five‐coordinated by one bidentate 4,4′‐dimethyl‐2,2′‐bipyridine mol­ecule, two monodentate pyridine‐coordinated 3‐amino­pyridine mol­ecules and one apical O atom from the perchlorate counter‐ion. Inter­molecular N—H⋯O and C—H⋯O hydrogen‐bonding inter­actions form a hydrogen‐bond‐sustained network.     

Poly­[[di­aqua­cobalt(II)]‐μ‐4,4′‐bi­pyridine‐κ2N:N′‐μ‐p‐phenyl­enebis­(oxy­acetato)‐κ2O:O′]

The title compound, [Co^II(C₁₀H₈O₆)(C₁₀H₈N₂)(H₂O)₂]_n, was obtained by the hydro­thermal reaction of CoSO₄ with benzene‐1,4‐dioxy­di­acetate [systematic name: p‐phenyl­ene­bis­(oxy­acetate)] and 4,4′‐bi­pyridine (4,4′‐bpy). The Co atom lies at an inversion center and the benzene‐1,4‐dioxydiacetate and 4,4′‐bipyridine moieties lie about other inversion centers. The benzene‐1,4‐dioxydiacetate ligands bridge the octahedral Co^II coordination centers, forming a one‐dimensional zigzag chain. The chains are further bridged by 4,4′‐bpy ligands, forming a novel two‐dimensional supramolecular architecture. Hydro­gen‐bonding interactions between the coordinated water mol­ecules and the carboxyl­ate O atoms lead to the formation of a three‐dimensional network structure.     

Bis(4,4′‐bi­pyridine‐κN)­bis­(hydrogen phthalato)‐κ2O,O′;κO‐zinc(II)

The title compound, [Zn(C₈H₅O₄)₂(C₁₀H₈N₂)₂], was obtained by the hydro­thermal reaction of ZnSO₄·7H₂O with phthalic acid (H₂pht) and 4,4′‐bi­pyridine (4,4′‐bipy). Crystallographic analysis shows that it has a one‐dimensional double‐chain structure via hydrogen‐bonding interactions. Each Zn^II atom, adopting a distorted tetrahedral geometry, is coordinated by two N atoms from two 4,4′‐bipy ligands, with Zn—N distances of 2.054 (4) and 2.104 (4) Å, and by two O atoms from symmetry‐related Hpht⁻ ligands, with Zn—O distances of 1.921 (4) and 2.019 (4) Å.     

Nickel‐Catalyzed Difluoroalkylation of (Hetero)Arylborons with Unactivated 1‐Bromo‐1,1‐difluoroalkanes

A nickel‐catalyzed cross‐coupling between (hetero)arylborons and unactivated 1‐bromo‐1,1‐difluoroalkanes has been developed. The use of two ligands (a bidentate bipyridine‐based ligand, 4,4′‐ditBu‐bpy, and a monodentate pyridine‐based ligand, DMAP) offers a highly efficient nickel‐based catalytic system to prepare difluoroalkylated arenes which have important applications in medicinal chemistry.     

A novel cadmium(II) coordination polymer with biphenyl‐3,3′,4,4′‐tetra­carboxylic acid and 4,4′‐bipyridine

A novel cadmium(II) coordination polymer, poly[[[bis­(4,4′‐bipyridine)cadmium(II)]‐μ₃‐4,4′‐dicarboxy­biphenyl‐3,3′‐di­carboxyl­ato] 0.35‐hydrate], {[Cd(C₁₆H₈O₈)(C₁₀H₈N₂)₂]·0.35H₂O}_n, was obtained by reaction of Cd(CH₃COO)₂·3H₂O, 4,4′‐bipyridine (4,4′‐bpy) and biphenyl‐3,3′,4,4′‐tetra­car­boxylic acid (H₄L) under hydro­thermal conditions. Each Cd^II atom lies at the centre of a distorted octa­hedron, coordinated by four O atoms from three H₂L²⁻ ligands and N atoms from two monodentate 4,4′‐bpy ligands. Each H₂L²⁻ ligand coordinates to three Cd^II atoms through two carboxyl­ate groups, one acting as a bridging bidentate ligand and the other in a chelating bidentate fashion. Two Cd atoms, two H₂L²⁻ anions and four 4,4′‐bpy ligands form a ring dimer node, which links into an extended broad zonal one‐dimensional chain along the c axis.     

Diverse Coordinative Functions of 4,4′‐Bipyridine Generating Abundant Weak Interactions and Novel Fluorescent Property in Cadmium(II)‐4‐sulfobenzoate Polymer

The cadmium(II) 4‐sulfobenzoate complex with 4,4′‐bipyridine, {[Cd₂(4,4′‐bipy)₄(4‐sb)₂(H₂O)₃] · 4H₂O}_n, has been synthesized and characterized by elemental analysis, IR, DTA‐TG, fluorescence analysis, powder X‐ray analysis, and single‐crystal X‐ray structural determination. Structural analysis showed that the complex contains two Cd atoms in an unsymmetrical unit. The Cd1 atom displays a seven‐coordinated geometry, which is a capped anti‐trigonal prismatic structure, whereas the Cd2 atom has an octahedral coordination. The 4,4′‐bipyridine ligands in the complex have three coordination behaviors, i.e., monodentate, dimeric linker, and polymeric bridge, which is the first example showing three coordinative functions for 4,4′‐bipyridine ligands in one complex. Moreover, three coordinative functions of 4,4′‐bipyridine ligands in this polymer lead to abundant weak interactions and novel fluorescent properties, which is benefit for design and preparation of functional materials in specific usage.     

Magnesium iodide–4,4′‐bipyridine–water (1/3/4) and strontium iodide–4,4′‐bipyridine–propan‐1‐ol (1/2.5/2)

Both of the title compounds, catena‐poly­[[[tetra­aqua­magnesium(I)]‐μ‐4,4′‐bi­pyridine‐κ²N:N′] diiodide bis(4,4′‐bi­pyridine) solvate], {[Mg(C₁₀H₈N₂)(H₂O)₄]I₂·2C₁₀H₈N₂}_n, (I), and catena‐poly­[[[μ‐4,4′‐bi­pyridine‐bis­[di­iodo­bis­(propan‐1‐ol)­strontium(I)]]‐di‐μ‐4,4′‐bi­pyridine‐κ⁴N:N′] bis(4,4′‐bi­pyri­dine) solvate], {[Sr₂I₄(C₁₀H₈N₂)₃(C₃H₈O)₄]·2C₁₀H₈N₂}_n, (II), are one‐dimensional polymers which are single‐ and double‐stranded, respectively, the metal atoms being linked by the 4,4′‐bi­pyridine moieties. The Mg complex, (I), is [cis‐{(H₂O)₄Mg(N‐4,4′‐bi­pyridine‐N′)_(2/2)}]_(∞|∞)I₂·4,4′‐bi­pyridine and Mg has a six‐coordinate quasi‐octahedral coordination environment. The Sr complex, (II), is isomorphous with its previously defined Ba counterpart [Kepert, Waters & White (1996). Aust. J. Chem. 49 , 117–135], being [(propan‐1‐ol)₂I₂Sr(N‐4,4′‐bi­pyridine‐N′)_(3/2)]_(∞|∞)·4,4′‐bi­pyridine, with the I atoms trans‐axial in a seven‐coordinate pentagonal–bipyramidal Sr environment.     

Poly[[diaqua‐μ‐4,4′‐bipyridine‐dinitratodi‐μ‐l‐tyrosinato‐dicopper(II)]: a chiral two‐dimensional coordination polymer

The title compound, [Cu₂(C₉H₁₀NO₃)₂(NO₃)₂(C₁₀H₈N₂)(H₂O)₂]_n, contains Cu^II atoms and l ‐tyrosinate (l ‐tyr) and 4,4′‐bipyridine (4,4′‐bipy) ligands in a 2:2:1 ratio. Each Cu atom is coordinated by one amino N atom and two carboxylate O atoms from two l ‐tyr ligands, one N atom from a 4,4′‐bipy ligand, a monodentate nitrate ion and a water molecule in an elongated octahedral geometry. Adjacent Cu atoms are bridged by the bidentate carboxylate groups into a chain. These chains are further linked by the bridging 4,4′‐bipy ligands, forming an undulated chiral two‐dimensional sheet. O—H...O and N—H...O hydrogen bonds connect the sheets in the [100] direction. This study offers useful information for the engineering of chiral coordination polymers with amino acids and 4,4′‐bipy ligands by considering the ratios of the metal ion and organic components.     

Synthesis and characterization of two isostructural 3d–4f coordination compounds based on pyridine‐2,6‐dicarboxylic acid and 4,4′‐bipyridine

The design and synthesis of 3d–4f heterometallic coordination polymers have attracted much interest due to the intriguing diversity of their architectures and topologies. Pyridine‐2,6‐dicarboxylic acid (H₂pydc) has a versatile coordination mode and has been used to construct multinuclear and heterometallic compounds. Two isostructural centrosymmetric 3d–4f coordination compounds constructed from pyridine‐2,6‐dicarboxylic acid and 4,4′‐bipyridine (bpy), namely 4,4′‐bipyridine‐1,1′‐diium diaquabis(μ₂‐pyridine‐2,6‐dicarboxylato)tetrakis(pyridine‐2,6‐dicarboxylato)bis[4‐(pyridin‐4‐yl)pyridinium]cobalt(II)dieuropium(III) octahydrate, (C₁₀H₁₀N₂)[CoEu₂(C₁₀H₉N₂)₂(C₇H₃NO₄)₆(H₂O)₂]·8H₂O, (I), and 4,4′‐bipyridine‐1,1′‐diium diaquabis(μ₂‐pyridine‐2,6‐dicarboxylato)tetrakis(pyridine‐2,6‐dicarboxylato)bis[4‐(pyridin‐4‐yl)pyridinium]cobalt(II)diterbium(III) octahydrate, (C₁₀H₁₀N₂)[CoTb₂(C₁₀H₉N₂)₂(C₇H₃NO₄)₆(H₂O)₂]·8H₂O, (II), were synthesized under hydrothermal conditions and characterized by IR and fluorescence spectroscopy, thermogravimetric analysis and powder X‐ray diffraction. Both compounds crystallize in the triclinic space group P. The Eu^III and Tb^III cations adopt nine‐coordinated distorted tricapped trigonal–prismatic geometries bridged by three pydc^2? ligands. The Co^II cation has a six‐coordination environment formed by two pydc^2? ligands, two bpy ligands and two coordinated water molecules. Adjacent molecules are connected by π–π stacking interactions to form a one‐dimensional chain, which is further extended into a three‐dimensional supramolecular network by multipoint hydrogen bonds.     

catena‐Poly­[[bis­(hexa­fluoro­acetyl­acetonato‐κ2O,O′)­zinc(II)]‐μ‐4,4′‐bi­pyridine‐κ2N:N′]

The structure of the title compound, catena‐poly[[bis(1,1,1,5,5,5‐hexafluoropentane‐2,4‐dionato‐κ²O,O′)zinc(III)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₅HF₆O₂)₂(C₁₀H₈N₂)]_n, con­sists of polymeric chains, running in two perpendicular directions, organized as planes normal to the tetragonal axis. The elemental unit of the chains is the zinc(II) coordination polyhedron bisected by a twofold symmetry axis, and thus only half of the unit is independent. The octahedral coordination geometry of the metal centre is composed of two oxy­gen‐chelating (symmetry‐related) hexa­fluoro­acetyl­acetonate groups and two translationally related 4,4′‐bi­pyridine groups, which act as connecting agents in the polymer structure. The stabilization of this architecture of chains and planes is associated with a number of weak C—H⋯O and C—H⋯F hydrogen bonds.     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.     

A three‐dimensional cadmium(II) coordination polymer: poly[[[μ‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ2N:N](μ‐3,3′‐thiodipropionato‐κ3O,O′:O)cadmium(II)] monohydrate]

In the title coordination polymer, {[Cd(C₆H₈O₄S)(C₁₃H₁₄N₂)]·H₂O}_n, the Cd^II atom displays a distorted octahedral coordination, formed by three carboxylate O atoms and one S atom from three different 3,3′‐thiodipropionate ligands, and two N atoms from two different 4,4′‐(propane‐1,3‐diyl)dipyridine ligands. The Cd^II centres are bridged through carboxylate O atoms of 3,3′‐thiodipropionate ligands and through N atoms of 4,4′‐(propane‐1,3‐diyl)dipyridine ligands to form two different one‐dimensional chains, which intersect to form a two‐dimensional layer. These two‐dimensional layers are linked by S atoms of 3,3′‐thiodipropionate ligands from adjacent layers to form a three‐dimensional network.     

Poly[diaquabis(μ‐4,4′‐bipyridine‐κ2N:N′)bis(ethane‐1,2‐diol)di‐μ‐sulfato‐dicopper(II)]

The title compound, [Cu₂(SO₄)₂(C₁₀H₈N₂)₂(C₂H₆O₂)₂(H₂O)₂]_n, contains two crystallographically unique Cu^II centres, each lying on a twofold axis and having a slightly distorted octahedral environment. One Cu^II centre is coordinated by two bridging 4,4′‐bipyridine (4,4′‐bipy) ligands, two sulfate anions and two aqua ligands. The second is surrounded by two 4,4′‐bipy N atoms and four O atoms, two from bridging sulfate anions and two from ethane‐1,2‐diol ligands. The sulfate anion bridges adjacent Cu^II centres, leading to the formation of linear ...Cu1–Cu2–Cu1–Cu2... chains. Adjacent chains are further bridged by 4,4′‐bipy ligands, which are also located on the twofold axis, resulting in a two‐dimensional layered polymer. In the crystal structure, extensive O—H...O hydrogen‐bonding interactions between water molecules, ethane‐1,2‐diol molecules and sulfate anions lead to the formation of a three‐dimensional supramolecular network structure.