Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of non‐functionalized olefins

The electrochemical reduction of WCl₆ results in the formation of an active olefin (alkene) metathesis catalyst. The application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to cross‐metathesis reactions of non‐functionalized acyclic olefins is reported. Undesirable reactions, such as double‐bond shift isomerization and subsequent metathesis, were not observed in these reactions. Cross‐metathesis of 7‐tetradecene with an equimolar amount of 4‐octene generated the desired cross‐product, 4‐undecene, in good yield. The reaction of 7‐tetradecene with 2‐octene, catalyzed by electrochemically reduced tungsten hexachloride, resulted in both self‐ and cross‐metathesis products. The cross‐metathesis products, 2‐nonene and 6‐tridecene, were formed in larger amounts than the self‐metathesis products of 2‐octene. The optimum catalyst/olefin ratio and reaction time were found to be 1 : 60 and 24 h, respectively. The cross‐metathesis of symmetrical olefins with α‐olefins was also studied under the predetermined conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of erucic acid with 2‐octene

The cross‐metathesis of erucic acid, (CH₃(CH₂)₇CH?CH(CH₂)₁₁COOH), with an excess of 2‐octene in the presence of an electrochemically produced tungsten‐based catalyst has been studied. Cross‐ and self‐hydrocarbon products, viz. 2‐undecene (C₁₁), 6‐dodecene (C₁₂) and 6‐pentadecene (C₁₅), were detected. The influence of several parameters, such as the 2‐octene/erucic acid and 2‐octene/catalyst ratios and the reaction time, on the yield of the cross‐metathesis product, 6‐pentadecene, was studied. The cross‐metathesis of functionalized olefins in the presence of an Al–e^?–WCl₆–CH₂Cl₂ system has not been reported in the literature so far. The cross‐metathesis products in the presence of this catalyst system can be obtained with high yield and high specificity. Copyright © 2004 John Wiley & Sons, Ltd.     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Stereoselective synthesis and polymerization of Exo‐5‐trimethylsilylnorbornene

Herein the stereoselective two‐step synthesis of pure exo‐5‐trimethylsilylnorbornene is reported. The monomer proved to be highly reactive in both metathesis and addition polymerization. ROMP polymerization was catalyzed by the first‐generation Grubbs catalyst. High‐molecular‐weight saturated addition polymers were prepared using nickel or palladium complexes as precatalysts and Na⁺[B(3,5‐(CF₃)₂C₆H₃)₄]⁻ and/or MAO as cocatalysts. The obtained addition polynorbornenes are highly gas permeable and microporous materials possessing large free volume and BET surface area (up to 540 m²/g). The influence of the substituent orientation (exo‐ vs. exo‐/endo‐mixture) on polymer properties was established. The metathesis polymer based on exo‐isomer exhibits 1.5‐ to 2‐fold increase of permeability coefficients for all gases in comparison to the similar polymer based on the mixture of exo‐ and endo‐isomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1234–1248     

Synthesis of laterally attached side‐chain liquid‐crystalline polynorbornenes with high mesogen density by ring‐opening metathesis polymerization

(±)‐exo,endo‐5,6‐Bis{[[11′‐[2″,5″‐bis[2‐(3′‐fluoro‐4′‐n‐alkoxyphenyl)ethynyl]phenyl]undecyl]oxy]carbonyl}bicyclo[2.2.1]hept‐2‐ene (n = 1–12) monomers were polymerized by ring‐opening metathesis polymerization in tetrahydrofuran at room temperature with Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂Ph)(O^tBu)₂ as the initiator to produce polymers with number‐average degrees of polymerization of 8–37 and relatively narrow polydispersities (polydispersity index = 1.08–1.31). The thermotropic behavior of these materials was independent of the molecular weight and therefore representative of that of a polymer at approximately 15 repeat units. The polymers exhibited an enantiotropic nematic mesophase when n was 2 or greater. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4076–4087, 2006     

Novel multifunctional polymeric materials with predominant cis microstructures derived from α‐norbornenyl macromonomer and stable macroinitiator via ring‐opening metathesis polymerization and atom transfer radical polymerization

Novel star‐like polymeric materials with high cis content could be obtained by using α‐norbornenyl macromonomers and highly stable macroinitiators derived from an active norbornene derivative [5‐(2‐bromo‐2‐methylpropionylaminomethyl)bicyclo[2.2.1]hept‐2‐ene (NBBrMPAM)], which was synthesized by the reaction of norbornene methylene amine and 2‐bromo‐2‐methylpropionyl bromide. The α‐norbornenyl macromonomer (NBPMMA), which is polymethyl methacrylate containing norbornenyl end group, was prepared by atom transfer radical polymerization (ATRP) using NBBrMPAM as an initiator. Star‐like polynorbornene with high cis microstructure (cis/trans = 72/28) was obtained directly by ring‐opening metathesis polymerization of NBPMMA macromonomer having number molecular weight (Mn ) as low as 6.39 × 10³. Random ring‐opening metathesis copolymerization of NBPMMA and norbornene derivative containing carbazole group (NBCbz) was carried out at 25 °C by using Ru catalyst [(Cy₃P)₂Cl₂Ru = CHPh, Cy = cyclohexyl, Ph = phenyl]. High cis (cis/trans = 63/37) organo‐soluble star‐like random poly(NBPMMA‐co‐NBCbz) was successfully obtained with high number‐average molecular weight (Mn ) of 4.76 × 10⁴ and molecular weight distribution polydispersity index of 1.78. Organo‐soluble comb‐shaped copolymers with MMA could be successfully obtained using ATRP macroinitiator [poly(HNBBrMPAM)] in diluted macroinitiator solution with a concentration less than 3.64 × 10^?2 mol.L^?1. This is the first ever attempt to prepare novel star‐like organo‐soluble polymeric materials with high cis microstructure via the combination of ring‐opening metathesis polymerization and ATRP. Multimodification could be considered to be carried out by using the functional bromo group at the end of side chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3382–3392, 2006     

FeCl3‐Catalyzed Ring‐Closing Carbonyl–Olefin Metathesis

Exploiting catalytic carbonyl–olefin metathesis is an ongoing challenge in organic synthesis. Reported herein is an FeCl₃‐catalyzed ring‐closing carbonyl–olefin metathesis. The protocol allows access to a range of carbo‐/heterocyclic alkenes with good efficiency and excellent trans diastereoselectivity. The methodology presents one of the rare examples of catalytic ring‐closing carbonyl–olefin metathesis. This process is proposed to take place by FeCl₃‐catalyzed oxetane formation followed by retro‐ring‐opening to deliver metathesis products.     

Rare‐Earth‐Metal Nitridophosphates through High‐Pressure Metathesis

Developing a synthetic method to target an broad spectrum of unknown phases can lead to fascinating discoveries. The preparation of the first rare‐earth‐metal nitridophosphate LiNdP₄N₈ is reported. High‐pressure solid‐state metathesis between LiPN₂ and NdF₃ was employed to yield a highly crystalline product. The in situ formed LiF is believed to act both as the thermodynamic driving force and as a flux to aiding single‐crystal formation in dimensions suitable for crystal structure analysis. Magnetic properties stemming from Nd³⁺ ions were measured by SQUID magnetometry. LiNdP₄N₈ serves as a model system for the exploration of rare‐earth‐metal nitridophosphates that may even be expanded to transition metals. High‐pressure metathesis enables the systematic study of these uncharted regions of nitride‐based materials with unprecedented properties.     

Improved molecular weight control in ring‐opening metathesis polymerization reactions in organic and aqueous media using N‐heterocyclic carbene–ruthenium arene/alkyne catalyst systems

A binary catalytic system, RuCl₂(N‐heterocyclic carbene)(p‐cymene)/alkyne, was developed for improved molecular weight control in ring‐opening metathesis polymerization (ROMP) reactions of norbornene derivatives in organic and aqueous media. Monometallic ruthenium arene compounds were activated using aryl and aliphatic terminal alkynes to form highly active metathesis species. The effects of alkyne structure and concentration on the overall catalytic activity were systematically investigated. The catalytic activity of the metathesis active species can be tuned by varying alkyne substituents. Also, the initiation rate of the ROMP reaction can be tuned by increasing the alkyne‐to‐Ru ratio. ROMP polymers with a wide range of molecular weights (91–832 kDa) were isolated in organic media, whereas polymers with a molecular weight range of 110–280 kDa with average particle sizes of 150–250 nm were isolated in aqueous media. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel organosoluble polynorbornene bearing a polar,pendant, ester‐bridged epoxy group via living ring‐opening metathesis polymerization

A novel organosoluble polynorbornene bearing a polar, pendant, ester‐bridged epoxy group [poly(oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate) (polyOMMC)] was prepared via the living ring‐opening metathesis polymerization (ROMP) of active norbornenes with a Ru catalyst. PolyOMMC exhibited excellent solubility in a variety of solvents. The number‐average molecular weight of polyOMMC linearly increased with the [M]/[I] ratio (where [M] is the monomer concentration and [I] is the initiator concentration), and a narrow polydispersity of 1.09–1.19 was observed; this was considered a living polymerization. When ROMP of oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate with [M]/[I] = 350 was carried out at 30 °C in CH₂Cl₂, the number‐average molecular weight (7.01 × 10⁴; polydispersity index = 1.07) was close to the calculated molecular weight (7.28 × 10⁴), and a diblock copolymer was observed after the addition of another monomer ([M]/[I] = 350) with an increase in the number‐average molecular weight (1.60 × 10⁵; polydispersity index = 1.11), which was close to the calculated molecular weight (1.61 × 10⁵). The modified polynorbornenes retained good solubility in methylene chloride, tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, N,N‐dimethylacetamide, and N‐methyl‐2‐pyrrdione. High‐performance polynorbornenes with active epoxy groups could be designed with great potential for applications in photoresists, UV curing, and elastomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4428–4434, 2006     

Linker‐Free,Silica‐Bound Olefin‐Metathesis Catalysts: Applications in Heterogeneous Catalysis

A set of heterogenized olefin‐metathesis catalysts, which consisted of Ru complexes with the H₂ITap ligand (1,3‐bis(2′,6′‐dimethyl‐4′dimethyl aminophenyl)‐4,5‐dihydroimidazol‐2‐ylidene) that had been adsorbed onto a silica support, has been prepared. These complexes showed strong binding to the solid support without the need for tethering groups on the complex or functionalized silica. The catalysts were tested in the ring‐opening–ring‐closing‐metathesis (RO‐RCM) of cyclooctene (COE) and the self‐metathesis of methyl oleate under continuous‐flow conditions. The best complexes showed a TON>4000, which surpasses the previously reported materials that were either based on the Grubbs–Hoveyda II complex on silica or on the classical heterogeneous Re₂O₇/B₂O₃ catalyst.     

Synthesis of polyethylene hybrid copolymers containing polyhedral oligomeric silsesquioxane prepared with ring‐opening metathesis copolymerization

Ring‐opening metathesis copolymerizations of cyclooctene and the polyhedral oligomeric silsesquioxane (POSS) monomer 1‐[2‐(5‐norbornen‐2‐yl)ethyl]‐3,5,7,9,11,13,15‐heptacyclopentylpentacyclo[9.5.1.1^3,9.1^5,15.1^7,13] octasiloxane (POSS–norbornylene) were performed with Grubbs's catalyst, RuCl₂(?CHPh)(PCy₃)₂. Random copolymers were formed and fully characterized with POSS loadings as high as 55 wt %. Diimide reduction of these copolymers afforded polyethylene–POSS random copolymers. Thermogravimetric analysis of the polyethylene–POSS copolymers under air showed a 70 °C improvement, relative to a polyethylene control sample of similar molecular weight, in the onset of decomposition temperature based on 5% mass loss. The homopolymer of POSS–norbornylene was also synthesized. This polymer had a rigid backbone according to ¹H NMR evidence of broad olefinic signals. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2920–2928, 2001     

Kinetics of the ring‐opening metathesis polymerization of a 7‐oxanorbornene derivative by Grubbs' catalyst

The kinetics of the initiation and propagation of the ring‐opening metathesis polymerization of exo,exo‐5,6‐bis(methoxycarbonyl)‐7‐oxabicyclo[2.2.1]hept‐2‐ene catalyzed by Grubbs' catalyst (Cl₂(PCy₃)₂Ru?CHPh) were measured by ultraviolet–visible and ¹H NMR spectroscopy, respectively. Activation parameters for these processes were also determined. Although the ratio of the rate constant of initiation to the rate constant of propagation was determined to be less than 1 for this system, this polymerization showed many of the characteristics of a living system, including low polydispersities. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2125–2131, 2003     

Metallocene‐mediated cationic ring‐opening polymerization of 2‐methyl‐ and 2‐phenyl‐oxazoline

The cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline was efficiently used using bis(η⁵‐cyclopentadienyl)dimethyl zirconium, Cp₂ZrMe₂, or bis(η⁵‐tert‐butyl‐cyclopentadienyl)dimethyl hafnium in combination with either tris(pentafluorophenyl)borate or tetrakis(pentafluorophenyl)borate dimethylanilinum salt as initiation systems. The evolution of polymer yield, molecular weight, and molecular weight distribution with time was examined. In addition, the influence of the initiation system and the monomer on the control of the polymerization was studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2011     

Isocyanate‐ and Isothiocyanate‐Derived RuIV‐Based Alkylidenes: Synthesis,Structure, and Activity

The synthesis and characterization of a series of isocyanate‐ and isothiocyanate‐derived second generation Grubbs–Hoveyda‐type ruthenium–alkylidene complexes, that is, [Ru(N?C?O)₂(IMesH₂)(?CH‐2‐(2‐PrO)‐C₆H₄)] ( 1 ), [Ru(N?C?O)₂(1,3‐dimesityl‐3,4,5,6‐tetrahydropyrimidin‐2‐ylidene)(=CH‐2‐(2‐PrO)‐C₆H₄)] ( 2 ), [Ru(N?C?S)₂(IMesH₂)(?CH‐2‐(2‐PrO)‐C₆H₄)] ( 3 ), and [Ru(N?C?S)₂(1,3‐dimesityl‐3,4,5,6‐tetrahydropyrimidin‐2‐ylidene)(?CH‐2‐(2‐PrO)‐C₆H₄)] ( 4 ), and their activity in various metathesis reactions are described. Compounds 1 – 4 were prepared by reaction of the parent complexes [RuCl₂(IMesH₂)(?CH‐2‐(2‐PrO)C₆H₄)] ( 5 ) (IMesH₂=1,3‐bis‐(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene) and [RuCl₂(1,3‐dimesityl‐3,4,5,6‐tetrahydropyrimidin‐2‐ylidene)(?CH‐2‐(2‐PrO)‐C₆H₄)] ( 6 ) with silver cyanate and thiocyanate, respectively. The X‐ray structure of 1 was determined, confirming the isocyanate‐type bonding of the ligand. The isothiocyanate‐type bonding in 3 and 4 was unambiguously confirmed by IR and ¹³C NMR spectroscopy. The isocyanate‐derived complexes 1 and 2 were found to be excellent catalysts for the ring‐opening metathesis polymerization (ROMP) of cis‐cycloocta‐1,5‐diene (COD). Both 1 and 2 yielded poly(COD) with a trans‐content of about 80 %. First‐order kinetics with unprecedentedly high rate constants of polymerization (k_p=0.068 and 0.26 s^?1, respectively) were observed. Compounds 3 and 4 were also active initiators for the ROMP of COD, however, they generated poly(COD) with a cis‐content of 80 and 67 %, respectively. Complexes 1 and 2 also showed good catalytic activity in cross‐metathesis (CM) reactions. Finally, 1 – 4 were also found to be excellent catalysts for the regioselective cyclopolymerization of diethyl 2,2‐dipropargylmalonate (DEDPM), resulting in poly(DEDPM) almost entirely based on five‐membered repeat units, that is, cyclopent‐1‐ene‐1,2‐vinylenes.     

Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 2. Ring‐opening metathesis polymerization of norbornene

The present work reports the application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to the ring‐opening metathesis polymerization of norbornene. Analysis of the polynorbornene microstructure by means of ¹H and ¹³C NMR spectroscopy indicates that the polymer contains a mainly cis stereoconfiguration of the double bonds (σ_c = 0.61) and a blocky distribution (r_tr_c > 1) of cis and trans double bonds (r_tr_c = 3.37). This catalytic system is reluctant to facilitate the competing addition reactions of cycloalkenes while proceeding with the polymerization reactions with good conversions and at short periods. Copyright © 2004 John Wiley & Sons, Ltd.     

Cleavable multiblock copolymer synthesized by ring‐opening metathesis copolymerization of cyclooctene and macrocyclic olefin and its hydrolysis to give carboxyl‐telechelic polymer

A novel cleavable multiblock copolymer was synthesized by ring‐opening metathesis polymerization (ROMP) of cyclooctene (COE) and a flexible 27‐membered macrocyclic olefin (MCO), which is acted as the spacer to collect the polymer structure block by block. MCO 2 was prepared via ring‐closing metathesis of the long chain alkyldiene, and then 2 was well‐ conducted ROMP with COE to provide the multiblock copolymer [Poly(COE)‐ 2 ]_m consisting of homo‐Poly(COE) blocks and ring‐opened 2 segments with different molecular weights (M_n = 30.0 – 249.6 × 10³) and polydispersity index (PDI) within 1.45–1.67 as variation of the feed ratio of COE to 2 . The multiblock copolymer chain containing weak ester linkage can be cleaved under alkali condition to afford the carboxyl‐telechelic Poly(COE) blocks with much lower molecular weights (M_n,h = 3.6–35.7 × 10³) and slight higher PDIs (1.65–1.88). The average block number on multiblock copolymer chain was obtained from the ratio of M_n to M_n,h and was reached up to the value of 7–16. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 380–388, 2010     

From a Phosphaketenyl‐Functionalized Germylene to 1,3‐Digerma‐2,4‐diphosphacyclobutadiene

The first 4π‐electron resonance‐stabilized 1,3‐digerma‐2,4‐diphosphacyclobutadiene [L^H₂Ge₂P₂] 4 (L^H=CH[CHNDipp]₂ Dipp=2,6‐ⁱPr₂C₆H₃) with four‐coordinate germanium supported by a β‐diketiminate ligand and two‐coordinate phosphorus atoms has been synthesized from the unprecedented phosphaketenyl‐functionalized N‐heterocyclic germylene [L^HGe‐P=C=O] 2 a prepared by salt‐metathesis reaction of sodium phosphaethynolate (P≡C?ONa) with the corresponding chlorogermylene [L^HGeCl] 1 a . Under UV/Vis light irradiation at ambient temperature, release of CO from the P=C=O group of 2 a leads to the elusive germanium–phosphorus triply bonded species [L^HGe≡P] 3 a , which dimerizes spontaneously to yield black crystals of 4 as isolable product in 67 % yield. Notably, release of CO from the bulkier substituted [L^tBuGe‐P=C=O] 2 b (L^tBu=CH[C(^tBu)N‐Dipp]₂) furnishes, under concomitant extrusion of the diimine [Dipp‐NC(^tBu)]₂, the bis‐N,P‐heterocyclic germylene [DippNC(^tBu)C(H)PGe]₂ 5 .     

Cationic Silica‐Supported N‐Heterocyclic Carbene Tungsten Oxo Alkylidene Sites: Highly Active and Stable Catalysts for Olefin Metathesis

Designing supported alkene metathesis catalysts with high activity and stability is still a challenge, despite significant advances in the last years. Described herein is the combination of strong σ‐donating N‐heterocyclic carbene ligands with weak σ‐donating surface silanolates and cationic tungsten sites leading to highly active and stable alkene metathesis catalysts. These well‐defined silica‐supported catalysts, [(≡SiO)W(=O)(=CHCMe₂Ph)(IMes)(OTf)] and [(≡SiO)W(=O)(=CHCMe₂Ph)(IMes)⁺][B(Ar^F)₄^?] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazol‐2‐ylidene, B(Ar^F)₄=B(3,5‐(CF₃)₂C₆H₃)₄] catalyze alkene metathesis, and the cationic species display unprecedented activity for a broad range of substrates, especially for terminal olefins with turnover numbers above 1.2 million for propene.     

Synthesis of norbornenes containing cationic mono‐ and di(cyclopentadienyliron)arene complexes and their ring‐opening metathesis polymerization

A number of classes of polynorbornenes containing cationic iron moieties within their side chains were prepared via ring‐opening metathesis polymerization with a ruthenium‐based catalyst. The iron‐containing polymers displayed excellent solubility in polar organic solvents. The weight‐average molecular weights of these polymeric materials were estimated to be in the range of 18,000–48,000. Thermogravimetric analysis of these polymers showed two distinct weight losses. The first weight loss was in the range of 204–260 °C and was due to the loss of the metallic moieties, whereas the second weight loss was observed at 368–512 °C and was due to the degradation of the polymer backbone. Cyclic voltammetry studies of the iron‐containing polymers showed that the 18 e^? cationic iron centers underwent a reduction to give the neutral 19 e^? complexes at half‐wave potential (E_1/2) = ?1.105 V. Photolysis of the metallated polymers led to the isolation of the norbornene polymers in very good yields. Differential scanning calorimetry studies showed a sharp increase in the glass‐transition temperatures up to 91 °C when rigid aromatic side chains were incorporated into the norbornene polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3053–3070, 2006