Structural Characterization of Alumina‐Supported Rh Catalysts: Effects of Ceriation and Zirconiation by using Metal–Organic Precursors

The effects of the addition of ceria and zirconia on the structural properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ‐Al₂O₃) are studied. Ceria and zirconia are deposited by using two preparation methods. Method I involves the deposition of ceria on γ‐Al₂O₃ from Ce(acac)₃, and the rhodium metal is subsequently added, whereas method II is based on a controlled surface reaction technique, that is, the decomposition of metal–organic M(acac)_x (in which M=Ce, x=3 and M=Zr, x=4) on Rh/γ‐Al₂O₃. The structures of the prepared catalyst materials are characterized ex situ by using N₂ physisorption, transmission electron microscopy, high‐angle annular dark‐field scanning transmission election microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy (XPS), and X‐ray absorption fine structure spectroscopy (XAFS). All supported rhodium systems readily oxidize in air at room temperature. By using ceriated and zirconiated precursors, a larger rhodium‐based metallic core fraction is obtained in comparison to the undoped rhodium catalysts, suggesting that ceria and zirconia protect the rhodium particles against extensive oxidation. XPS results indicate that after the calcination and reduction treatments, a small amount of chlorine is retained on the support of all rhodium catalysts. EXAFS analysis shows significant Rh? Cl interactions for Rh/Al₂O₃ and Rh/CeO_x/Al₂O₃ (method I) catalysts. After reaction with H₂/He in situ, for series of samples with 1.6 wt % Rh, the EXAFS first shell analysis affords a mean size of approximately 30 atoms. A broader spread is evident with a 4 wt % rhodium loading (ca. 30–110 atoms), with the incorporation of zirconium providing the largest particle sizes.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of proton‐conducting organic–inorganic polymeric materials by ASAXS

The distribution of ZrO₂ and phosphotungstic acid (PTA) in a matrix of sulfonated polyether ketone was investigated by anomalous small‐angle X‐ray scattering (ASAXS). Scattering curves were obtained using X‐ray energies near the Zr and W absorption edges, allowing the independent analysis of the distribution of ZrO₂ and PTA in the sample. The interaction between both inorganic components improved their dispersion considerably when compared with films containing just one of the additives. The synergism was correlated to previous investigations concerning proton conductivity and permeability of the membranes developed for direct methanol fuel cell. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2981–2992, 2005     

Facile fabrication and self‐assembly of polystyrene–silica asymmetric colloid spheres

This study presents a very simple method to fabricate organic–inorganic asymmetric colloid spheres. In this approach, when silica particles are used as the Pickering emulsifier to stabilize the monomer droplets (styrene) in water via acid–base interaction between silica particles and auxiliary monomer (1‐vinylimidazole), the exposed surfaces of silica particles are very easy to be locally modified with 3‐(trimethoxysilyl)propyl methacrylate. When water‐based initiator is added, polystyrene–silica asymmetric colloid spheres are highly yielded. The sizes of silica and polymer particles can be tunable. These organic–inorganic anisotropic colloid spheres can self‐assemble into an interesting thickness‐dependent film. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,crystal structure solution and characterization of two organic–inorganic hybrid layered materials based on metal sulfates and 1,4‐phenylenediamine

Two organic–inorganic hybrid layered materials, namely poly[(μ‐1,4‐diaminobenzene‐κ²N:N′)[μ₃‐sulfato(VI)‐κ⁴O:O′:O′′,O′′′]manganese], [Mn(SO₄)(C₆H₈N₂)]_n, 1 , and poly[(μ‐1,4‐diaminobenzene‐κ²N:N′)[μ₃‐sulfato(VI)‐κ⁴O:O′:O′′,O′′′]copper], [Cu(SO₄)(C₆H₈N₂)]_n, 2 , have been synthesized using 1,4‐phenylenediamine (PPD) as an organic template and component (linker). Both materials form three‐dimensional frameworks. The crystal structures were determined using data from powder X‐ray diffraction measurements. The purity and morphology of the compounds were studied by elemental analyses and SEM investigations, and their thermal stabilities were determined by thermogravimetric and nonambient powder X‐ray diffraction measurements, which indicated that 1 is stable up to 537 K and 2 is stable up to 437 K.     

Highly Oxidized Platinum Nanoparticles Prepared through Radio‐Frequency Sputtering: Thermal Stability and Reaction Probability towards CO

Platinum‐oxide nanoparticles were prepared through the radio‐frequency (RF) discharge sputtering of a Pt electrode in an oxygen atmosphere. The structure, particles size, electronic properties, and surface composition of the RF‐sputtered particles were studied by using transmission electron microscopy and X‐ray photoelectron spectroscopy. The application of the RF discharge method resulted in the formation of highly oxidized Pt⁴⁺ species that were stable under ultrahigh vacuum conditions up to 100 °C, indicating the capability of Pt⁴⁺–O species to play an important role in the oxidation catalysis under real conditions. The thermal stability and reaction probability of Pt⁴⁺ oxide species were analyzed and compared with those of Pt²⁺ species. The reaction probability of PtO₂ nanoparticles at 90 °C was found to be about ten times higher than that of PtO‐like structures.     

Generation and Characterization of the First Persistent Platinum(I)‐Centered Radical

The first persistent platinum(I)‐centered radical was generated by homolytic cleavage of a Pt?HgSiR₃ bond of a mercury‐substituted platinum(II) complex. The Pt^I radical was characterized by EPR spectroscopy, chemical trapping experiments, and density functional theory (DFT) calculations.     

Characterization of high‐aspect‐ratio periodic structures by X‐ray photoelectron spectroscopy

X‐ray photoelectron spectroscopy (XPS) is a powerful surface characterization technique often relied on for quantification of surface species and coverages. Investigation of silicon microrods, considered a model for high‐aspect‐ratio structures, at different angles with respect to substrate normal was determined to have a significant impact on the relative sensitivity of surface‐bound species on rods relative to the base substrate. Comparison between planar silicon and microrod arrays demonstrates that the angular dependence is complicated and that careful studies must optimize conditions to differentiate between surfaces. In addition, the use of reverse angle resolved XPS, where the substrate is turned away from the X‐ray source, is shown to assist in simplifying the spectrum by removing underlying signal from the substrate near the base. Copyright © 2016 John Wiley & Sons, Ltd.     

The effect of localized lateral growth of multiwalled carbon nanotubes with ammonia plasma post‐treatment

We present horizontally‐oriented multiwalled carbon nanotubes (CNTs) grown by means of thermal chemical vapor deposition. The CNT is across the trenches of the catalytic metals on predefined Ti electrodes. The properties of the lateral multiwalled CNT, following post‐ammonia plasma treatment, are reported. Information about the ammonia plasma treated on the interface structure of CNT is obtained using X‐ray photoelectron spectroscopy. The experimental results show that upon exposure to ammonia, the electrical property of the CNT is found to increase. Copyright © 2012 John Wiley & Sons, Ltd.     

Well‐Defined Flowerlike NdOCl Nanostructures: Nonaqueous Sol–Gel Synthesis,Nanoscale Characterization and Their Magnetic and Photoluminescence Properties

A facile nonaqueous solution route for the fabrication of NdOCl nanostructures based on a ligand‐exchange protocol and further thermal decomposition in organic medium, using only chloride salt as the neodymium source, is reported and the formation mechanism is proposed. The morphology, crystal structure, and chemical compositions of the sample were characterized at the nanoscale. XRD results and selected‐area electron diffraction patterns show that the sample is purely tetragonal NdOCl without any other impurity phases. TEM results show that the NdOCl nanostructures have a well‐defined flowerlike shape, which looks like a chrysanthemum just about to bloom. Magnetization measurements reveal that the NdOCl nanoflowers show room‐temperature ferromagnetism. The photoluminescence properties were also studied. These results are significant for fundamental research and promising applications of rare‐earth‐based nanostructures.     

XPS and ToF‐SIMS study of a chalcopyrite–pyrite–sphalerite mixture treated with xanthate and sodium bisulphite

We present data from the surface analysis of a mineral mixture of chalcopyrite, pyrite, and sphalerite, elucidating surface reactions occurring during grinding and flotation. Flotation tests are also performed on the mixture, carried out in the presence of collector (SIBX) and also in the absence and presence of sodium bisulphite (NaHSO₃), a gangue sulphide mineral depressant. X‐ray photoelectron spectroscopy (XPS) studies on the ground mineral sample prior to flotation indicate that the mineral feed is heavily oxidised, especially the sphalerite in the mixture. Flotation recovery data clearly shows the effect of this oxidation, with the mineral recoveries of all three phases being lower than those observed in single mineral studies. In addition, the flotation recoveries show the effect of the inadvertent copper activation of pyrite and sphalerite, and the effect of bisulphite in reducing the flotation of sphalerite and pyrite in the mixture. Time of flight secondary ion mass spectrometry(ToF‐SIMS) data indicates that the depressing effect of bisulphite is due to the removal of copper and sulphur‐like species from the surface of pyrite and sphalerite and a consequent increase in the oxidation of these minerals. ToF‐SIMS data also indicates that the low recovery of pyrite and chalcopyrite in the absence of collector is most likely due to precipitation of zinc hydroxide on the surfaces of these minerals, formed in solution due to copper activation of sphalerite. Copyright © 2005 John Wiley & Sons, Ltd.     

The electronic structure of a diarsaallene –As=C=As– and a phosphaarsaallene –P=C=As–: UV photoelectron spectroscopy and theoretical studies

The electronic properties of a diarsaallene ArAs=C=AsAr and a phosphaarsaallene ArP=C=AsAr (Ar: 2,4,6-tri-tert-butylphenyl) have been investigated by using UV photoelectron spectroscopy and by density functional calculations on model compounds [(CH₃)₂C₆H₃Pn=C=AsC₆H₃(CH₃)₂, Pn: As, P]. Moreover, a comparison of the geometrical and electronic structures of the parent heteroallenes with those of the arsaethene H₂C=AsH and phosphaethene H₂C=PH has also been undertaken in order to determine the magnitude of the interaction between the π bond and the pnictogen lone pair n_Pn.     

Observation of Transition‐Metal–Boron Triple Bonds in IrB2O− and ReB2O−

Multiple bonds between boron and transition metals are known in many borylene (:BR) complexes via metal d_π→BR back‐donation, despite the electron deficiency of boron. An electron‐precise metal–boron triple bond was first observed in BiB₂O^? [Bi≡B?B≡O]^? in which both boron atoms can be viewed as sp‐hybridized and the [B?BO]^? fragment is isoelectronic to a carbyne (CR). To search for the first electron‐precise transition‐metal‐boron triple‐bond species, we have produced IrB₂O^? and ReB₂O^? and investigated them by photoelectron spectroscopy and quantum‐chemical calculations. The results allow to elucidate the structures and bonding in the two clusters. We find IrB₂O^? has a closed‐shell bent structure (C_s, ¹A′) with BO^? coordinated to an Ir≡B unit, (^?OB)Ir≡B, whereas ReB₂O^? is linear (C_∞v, ³Σ^?) with an electron‐precise Re≡B triple bond, [Re≡B?B≡O]^?. The results suggest the intriguing possibility of synthesizing compounds with electron‐precise M≡B triple bonds analogous to classical carbyne systems.     

Time‐dependent deformation of structurally chiral polymer networks in stabilized cholesteric liquid crystals

Polymerization of crosslinkable liquid crystal monomers in chiral liquid crystalline media stabilizes the phase and enables distinct electro‐optic properties relative to small‐molecule analogs. Particularly interesting are cases where the polymerization forms a crosslinked polymer network that maintains a “structural” chirality. Recent reports have employed this methodology to realize a diverse set of electro‐optic responses in polymer stabilized cholesteric liquid crystals (PSCLCs) including reflection bandwidth broadening, reflection wavelength tuning, and dynamic scattering modes. It has been proposed that the mechanism at the root of these electro‐optic responses is an ion‐mediated, electromechanical deformation of the stabilizing and structurally chiral polymer network. In an effort to better understand the nature of these deformations, here we have characterized the electro‐optic response of PSCLCs with different polymer concentrations and crosslink densities. The dynamic response of PSCLCs to electric fields exhibits a time‐dependent behavior reminiscent of the creep of polymeric materials to mechanical deformations. The electro‐optic response can be described as the superposition of two contributions: the fast deformation of a relatively soft component of the polymer network (1–2 s) and the slower (10–20 s) deformation of a harder component. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1087–1093     

Preparation and characters of hyperbranched polyester‐based organic‐inorganic hybrid material compared with linear polyester

To compare the properties of hyperbranched polymers with linear oligomers for preparing organic‐inorganic hybrids, hyperbranched aliphatic polyester (Boltorn^TM H20) and linear polyester hexa‐acrylate (EB830) were selected as organic components for preparing UV‐curable transparent hybrid materials using 3‐(trimethoxysilyl) propylmethacrylate as a coupling agent via a sol‐gel process. The prehydrolyzed product of tetraethoxysilane was used as an inorganic component. The effects of inorganic content on the morphologies, thermal behaviors, photopolymerizaiton kinetics and mechanical properties of the hybrids were investigated. The results show that for hyperbranched polyester‐based hybrids, the organic phase shows much better compatibility with inorganic phase even at high inorganic component content due to its special spheral shape and plenty of functional end groups, compared with linear EB830‐based hybrids. Copyright © 2004 John Wiley & Sons, Ltd.     

New Reactions of N‐tert‐Butylimines; Formation of N‐Heterocycles by Methyl Radical Elimination on Flash Vacuum Thermolysis of N‐Benzylidene‐ and N‐(2‐Pyridylmethylidene)‐tert‐butylamines

Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.     

Thermal expansion of epoxide–amine networks in the glassy state

The dilatometric curves of 21 epoxide–amine network samples made from five distinct epoxide–amine pairs, with variable amine/epoxide functional ratio values for three of these pairs, were recorded in the 200 K to T_g (glass‐transition temperature) − 50 K temperature range. The curves display a quasiparabolic shape consistent with an expansion law derived from a thermodynamic study [Bongkee, C. Polym Eng Sci 1985, 25(18), 135]: where V and V₀ are the volumes at T and 0 K, respectively, and A is a coefficient that varied for the studied samples between 2.5 × 10⁻⁷ and 5.0 × 10⁻⁷ K⁻². A tentative study of the structure–property relationships in this field revealed that A does not depend significantly on the crosslink density, the cohesive energy density, the T_g, or the local mobility. In contrast, A seems to be sharply related to the chain flexibility, which essentially depends on the aromatic content in the studied structural series. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 537–543, 2000     

Synthesis and optical properties of organic–inorganic hybrid semi‐interpenetrating polymer network gels containing polyfluorenes

Organic–inorganic hybrid semi‐interpenetrating polymer network (semi‐IPN) gels containing polyfluorenes (PFs) are synthesized by hydrosilylation reaction of joint and rod molecules in toluene, where PFs are poly(9,9‐dihexylfluorene‐2,7‐diyl) (PF6) or, poly(9,9‐dioctylfluorene‐2,7‐diyl) (PF8), joint molecules are 1,3,5,7‐tetramethylcyclotetrasiloxane (TMCTS), or 1,3,5,7,9,11,13,15‐octakis(dimethylsilyloxy)pentacyclo‐[9,5,1,1,1,1]octasilsesquioxane (POSS), and rod molecules are 1,5‐hexadiene (HD) or 1,9‐decadiene (DD). The semi‐IPN gels containing low molecular weight PF6 show higher photoluminescence efficiency (?_g) than the toluene solution of PF6L (?_s). The semi‐IPN gels composed of long rod molecule of DD and cubic joint molecule of POSS show the most effective increase in the emission intensity. The emission intensity of PF6L increases as formation of the network in the POSS‐DD semi‐IPN gel. The POSS‐DD semi‐IPN gels containing high molecular weight PF6 and PF8 also show the increase of emission intensity than those of the toluene solutions. The semi‐IPN synthesized in cyclohexane show syneresis and phase separation between network structure and PF chains. The semi‐IPN gels containing PF8 show emission peaks at 450 and 470 nm derived from β‐sheet structure of PF8. A systematic study clears correlation between emission property and network structure and/or composition of semi‐IPN gels. The semi‐IPN gels provide emissive self‐standing soft materials with high efficiency and in a narrow wavelength range emission. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 973–984