Discrete dispersion of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWNTs) have been effectively wetted and dispersed in saturated sodium hydroxide (NaOH) alcohol-water solutions with little surface damage or shortening of the tubes; the treated material was dissolvable as individual tubes in many common organic solvents.     

Selective oxidation of metallic single-walled carbon nanotubes

In this work we present a simple and non-invasive approach to the preparation of semi-conducting single-walled carbon nanotubes (SWCNTs) through selective destruction of the metallic counterparts present in the starting material. Most separation techniques require chemical treatment, the application of ultrasound, or the addition of auxiliary molecules, which lead to the introduction of defects and impurities. In this contribution, laser ablation SWCNTs were selectively oxidised via long-term heating leading to the enrichment of semi-conductive nanotubes. Spectroscopic analysis demonstrates that the selective character of oxidation occurs only in the optimal temperature range, determined by thermo-gravimetric analysis. By tuning the process parameters, one can obtain a sample exhibiting different purity (up to 95 % of semi-conducting nanotubes) and separation efficiency. The samples’ quality and yield of separation were determined by UV-VIS-NIR spectroscopy, Raman spectroscopy, and TG analysis. The approach presented is readily scaleable.     

Enhanced dispersion stability of supramolecular complexes of single-walled carbon nanotubes with fluorene-based conjugated polymers

Supramolecular complexes of single-walled carbon nanotubes (SWNTs) with poly(9,9-didodecylfluorene-2,7-diyl) (PF) derivatives were prepared using a solution dispersion process. A series of novel conjugated PF polymers with carboxyl or hydroxyl end groups at both ends were synthesized by the Yamamoto-type coupling of 2,7-dibromo-9,9-didodecylfluorene using Ni(COD)₂ as a catalyst, and further end-capped with either 4-bromobenzoic acid or 4-bromobenzyl alcohol to obtain the end-functionalized PF with different terminal groups. An α-monocarboxy-ω-mono-methoxy poly(ethylene glycol) was connected to both ends of the PF-containing hydroxyl end groups to produce triblock copolymers of poly(ethylene glycol)-b-polyfluorene-b-poly(ethylene glycol) (PEO-b-PF-b-PEO). These SWNTs were completely wrapped with the conjugated polymers through π–π interactions, which enhanced the solubility of the SWNT complexes in organic media, and prevented the aggregation of the polymer–SWNT complexes into large bundles. This indicates that the dispersion stability of SWNTs is enhanced by the addition of the conjugated polymers.     

Concomitant length and diameter separation of single-walled carbon nanotubes

Gel electrophoresis and column chromatography conducted on individually dispersed, ultrasonicated single-walled carbon nanotubes yield simultaneous separation by tube length and diameter. Electroelution after electrophoresis is shown to produce highly resolved fractions of nanotubes with average lengths between 92 and 435 nm. Separation by diameter is concomitant with length fractionation, and nanotubes that have been cut shortest also possess the greatest relative enrichments of large-diameter species. Longer sonication time causes increased electrophoretic mobility in the gels; thus, ultrasonic processing determines the degree of both length and diameter separation of the nanotubes. The relative quantum yield decreases nonlinearly as the nanotube length becomes shorter. These techniques constitute a preparative, scalable method for separating nanotubes by two important attributes required for electronic and sensor applications.     

Selective intercalation of polymers in carbon nanotubes

A room-temperature, open-air method is devised to selectively intercalate relatively low-molecular-weight polymers (approximately 10-100 kDa) from dilute, volatile solutions into open-end, as-grown, wettable carbon nanotubes with 50-100 nm diameters. The method relies on a novel self-sustained diffusion mechanism driving polymers from dilute volatile solutions into carbon nanotubes and concentrating them there. Relatively low-molecular-weight polymers, such as poly(ethylene oxide) (PEO, 600 kDa) and poly(caprolactone) (PCL, 80 kDa), were encapsulated in graphitic nanotubes as confirmed by transmission electron microscopy, which revealed morphologies characteristic of mixtures in nanoconfinements affected by intermolecular forces. Whereas relatively small, flexible polymer molecules can conform to enter these nanotubes, larger macromolecules (approximately 1000 kDa) remain outside. The selective nature of this process is useful for filling nanotubes with polymers and could also be valuable in capping nanotubes.     

Dispersions of individual single-walled carbon nanotubes of high length

In summary, we have presented a suitable approach to obtain surfactant-stabilized suspensions of long, individually dispersed SWCNTs essentially free of bundles. The combination of mild tip and bath ultrasonication has proven effective in unbundling the SWCNT ropes and, at the same time, in minimizing tube shortening. This method is expected to be useful for applications that critically depend on the availability of bulk dispersions of long, individual tubes with minimized defect densities, such as for nanotube-based electronics and composite materials. Furthermore, the observed purification-induced changes in the electronic structure of HiPco SWCNTs indicate that care has to be taken when comparing their properties with those of the as-produced material.     

Selective interactions of porphyrins with semiconducting single-walled carbon nanotubes

A derivatized porphyrin with long alkyl chains, 5,10,15,20-tetrakis(hexadecyloxyphenyl)-21H,23H-porphine, is selective toward semiconducting single-walled carbon nanotubes (SWNTs) in presumably noncovalent interactions, resulting in significantly enriched semiconducting SWNTs in the solubilized sample and predominantly metallic SWNTs in the residual solid sample according to Raman, near-IR absorption, and bulk conductivity characterizations.     

Influence of molecular weight on selective oligomer-assisted dispersion of single-walled carbon nanotubes and subsequent polymer exchange

A series of oligofluorenes was synthesized and used as a SWNT selecting template to study the chain length effect on SWNTs dispersions in toluene. The octamer exhibits the same selectivity as the corresponding polymer. Nevertheless, SWNT/oligomer complexes are unstable, which allows fast exchange of the oligomer with a coating polymer.     

Bulk dispersion of single-walled carbon nanotubes in silicones using diblock copolymers

The interactions of a series of poly(3-decylthiophene)-block-polydimethylsiloxanes (P3DT-b-PDMS) with single-walled carbon nanotubes (SWNTs) are investigated. The formation of supramolecular complexes of P3DT-b-PDMS with SWNTs is studied in THF, toluene, xylenes, and CHCl₃, and the resulting complexes are characterized by UV-Vis-NIR absorption and fluorescence spectroscopy. The P3DT-b-PDMS-SWNT and P3DT-SWNT complexes are further incorporated into a commercially available silicone rubber formulation. Percolation thresholds of <0.02% (P3DT-b-PDMS-SWNT) and <0.05% (P3DT-SWNT) are measured. A decrease in the percolation threshold when using the block copolymer for nanotube dispersion is observed, suggesting that the presence of a covalently-linked PDMS block improves SWNT distribution in the silicone elastomer and allows a percolation network to form at low SWNT loadings. In addition, it is found that entanglement of the silicone block of P3DT-PDMS with bulk silicones results in anchoring of the nanotubes within the composite, and leads to reversible conductivity changes upon repeated stretching and relaxation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 265–273     

Shear-induced ordering of micellar arrays in the presence of single-walled carbon nanotubes

Single-walled carbon nanotubes were found to induce elongation and alignment of surfactant micelles in thin films under the action of shear, leading to the formation of ordered arrays over micron lengths.     

Selective dispersion of single-walled carbon nanotubes with specific chiral indices by poly(N-decyl-2,7-carbazole)

Physico-chemical methods to sort single-walled carbon nanotubes (SWNTs) by chiral index are presently lacking but are required for in-depth experimental analysis and also for potential future applications of specific species. Here we report the unexpected selectivity of poly(N-decyl-2,7-carbazole) to almost exclusively disperse semiconducting SWNTs with differences of their chiral indices (n - m) ≥ 2 in toluene. The observed selectivity complements perfectly the dispersing features of the fluorene analogue poly(9,9-dialkyl-2,7-fluorene), which disperses semiconducting SWNTs with (n - m) ≤ 2 in toluene. The dispersed samples are further purified by density gradient centrifugation and analyzed by photoluminescence excitation spectroscopy. All-atom molecular modeling with decamer model compounds of the polymers and (10,2) and (7,6) SWNTs suggests differences in the π-π stacking interaction as origin of the selectivity. We observe energetically favored complexes between the (10,2) SWNT and the carbazole decamer and between the (7,6) SWNT and the fluorene decamer, respectively. These findings demonstrate that subtle structural changes of polymers lead to selective solvation of different families of carbon nanotubes. Furthermore, chemical screening of closely related polymers may pave the way toward simple, low-cost, and index-specific isolation of SWNTs.     

Selective metallic tube reactivity in the solution-phase osmylation of single-walled carbon nanotubes

Single-walled carbon nanotubes have been reacted with osmium tetroxide (OsO(4)) in solution in the presence of O(2) and UV irradiation at 254 nm. We observe one main structural motif, namely thickly coated nanotube structures, densely covered with OsO(2), consisting of multiple bundles of derivatized tubes. In a few instances, bridging uncoated tubes, connecting these thickly coated structures, incorporate a number of smaller nanotube bundles, projecting out from the larger functionalized aggregates of tubes. It is believed that OsO(2) (a) initially forms on the nanotubes by the preferential covalent sidewall functionalization of metallic nanotubes and (b) subsequently self-aggregates. The formation of an intermediate charge-transfer complex is likely the basis for the observed selectivity and reactivity of metallic tubes. Extensive characterization of these osmylated adducts has been performed using a variety of electron microscopy and optical spectroscopy techniques.     

Selective host-guest interaction of single-walled carbon nanotubes with functionalised fullerenes

Exohedrally functionalised fullerenes have been inserted in single-walled carbon nanotubes (SWNTs) with the aid of supercritical carbon dioxide to form peapods; C(61)(COOEt)(2) are encapsulated in SWNTs in high yield, whereas C(61)(COOH)(2) aggregate via hydrogen bonding to form a supramolecular complex, which sterically hinders encapsulation and causes it to adhere to the exterior surface of the SWNTs.     

Polymer structure and solvent effects on the selective dispersion of single-walled carbon nanotubes

Combinations of different aromatic polymers and organic solvents have been studied as dispersing agents for preparing single-walled carbon nanotubes solutions, using optical absorbance, photoluminescence-excitation mapping, computer modeling, and electron microscopic imaging to characterize the solutions. Both the polymer structure and solvent used strongly influence the dispersion of the nanotubes, leading in some cases to very high selectivity in terms of diameter and chiral angle. The highest selectivities are observed using toluene with the rigid polymers PFO-BT and PFO to suspend isolated nanotubes. The specific nanotube species selected are also dependent on the solvent used and can be adjusted by the use of THF or xylene. Where the structure has more flexible conformations, the polymers are shown to be less selective but show an enhanced overall solubilization of nanotube material. When chloroform is used as the solvent, there is a large increase in the overall solubilization, but the nanotubes are suspended as bundles rather than as isolated tubes which leads to a quenching of their photoluminescence.     

High dispersion and electrocatalytic properties of palladium nanoparticles on single-walled carbon nanotubes

Palladium (Pd) nanoparticles were electrochemically dispersed on single-walled carbon nanotubes (SWNTs) by electroreduction of octahedral Pd(IV) complex formed on the SWNT surface. The structure and nature of the resulting Pd-SWNT composites were characterized by transmission electron microscopy and X-ray diffraction. The electrocatalytic properties of the Pd/SWNT electrode for hydrazine oxidation have been investigated by cyclic voltammetry; high electrocatalytic activity of the Pd/SWNT electrode can be observed. This may be attributed to the high dispersion of palladium catalysts and the particular properties of SWNT supports. The results imply that the Pd-SWNT composite has good potential applications in fuel cells.     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

Ultrathin anisotropic films assembled from individual single-walled carbon nanotubes and amine polymers

Oxidized individual single-walled carbon nanotubes and amine polymers have been assembled into 11-32-nm-thick well-ordered conductive films. The films show highly anisotropic electrical conductivity, which is dominated by the nanotubes in the horizontal plane and by polymer-mediated tunneling in the vertical direction. The ratio of the "along" to "across" conductivity is approximately 10(3). The subnanometer thick polymer layers interleaved with monolayers of nanotubes show conductivity several orders of magnitude higher than films of pristine polymers.     

Diameter-selective dispersion of single-walled carbon nanotubes using a water-soluble, biocompatible polymer

One-step diameter-selective dispersion of HiPco single-walled carbon nanotubes has been accomplished through noncovalent complexation of the nanotubes with a water-soluble, biocompatible polymer chitosan at room temperature.     

Reversible dispersion and releasing of single-walled carbon nanotubes by a stimuli-responsive TTFV-phenylacetylene polymer

A TTFV-phenylacetylene folding polymer was synthesized to exhibit the property of reversibly dispersing and releasing single-walled carbon nanotubes in organic solvents under the control of redox or pH stimuli.