Bis(2-mercaptobenzoxazolato)mercury(II) and bis(2-pyridinethiolato)mercury(II) complexes as carriers for thiocyanate selective electrodes

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on bis(2-mercaptobenzoxazolato)mercury(II) [Hg(MBO)₂] and bis(2-pyridinethiolato)mercury(II) [Hg(PT)₂] complexes as new carriers for thiocyanate-selective electrodes are reported. The electrodes were prepared by coating the membrane solution containing PVC, plasticizer, carriers and additives on the surface of graphite electrodes. Influence of the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses towards thiocyanate over a wide concentration range of 1×10⁻⁶ to 0.1 M, with slopes of 60.6±0.8 and 57.5±1.2 mV per decade of thiocyanate concentration for Hg(MBO)₂ and Hg(PT)₂ carriers, respectively, over a wide pH range of 3-11. The limit of detection for both electrodes was ∼6×10⁻⁷ M. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show fairly good discrimination of thiocyanate over several inorganic and organic anions. The electrodes were successfully applied to direct determination of thiocyanate in saliva and as indicator electrodes in precipitation titrations.     

Pt(II) complexes of 4-amino-4H-1,2,4-triazole

The coordination ability of 4-amino-4H-1,2,4-triazole with Pt(II), both in solution and solid states, is elucidated by conventional and linear-polarized IR spectroscopy of oriented colloid suspensions in nematic host, ¹H- and ¹³C-NMR, UV-Vis spectroscopy, mass spectrometry (ESI and FAB), TGV, and DSC methods. The interpretation of the spectroscopic characteristics of corresponding metal complexes is obtained by comparison with free 4-amino-4H-1,2,4-triazole. In addition, quantum chemical calculations of the last compound are performed to obtain data for electronic structures and optical properties of the ligand, thus supporting the experimental elucidation. The evaluation of the cell viability on a panel of human tumor cell lines is made. The new Pt(II) complexes exerted cytotoxic effects in a concentration-dependent manner.     

Spectrophotometric determination of microamounts of quercetin based on its complexation with copper(II)

The complexation process of the transition metal Cu(II) with quercetin was studied. The investigation was conducted spectrophotometrically in ethanol at the maximum absorption wavelength of 458.5 nm. Cu(II)—quercetin complex composition (1: 1) was determined using the Job, Harvey—Manning, and mole ratio methods. Complex stability constant was calculated by the Job and mole ratio methods and the respective logarithm values were 7.53 ± 0.25 and 7.44 ± 0.03. A new method for quantitative determination of the quercetin content in solution was developed in this work. At the optimal conditions quercetin was determined in concentrations ranging from 0.202 to 1.006 μg cm⁻³ with relative standard error of 2.5 % to 5.5 %. The lower detection limit was 0.067 μg cm⁻³. The method was found very accurate, reproducible, and sensitive, capable to determine microamounts of quercetin in pharmaceutical preparations.     

A simple and selective flow-injection spectrophotometric determination of copper(II) by using acetylsalicylhydroxamic acid

A new simple, and rapid flow-injection spectrophotometric method is developed for the determination of trace amounts of Cu(II) by using a new chromogenic reagent acetylsalicylhydroxamic acid (AcSHA). The method is based on the formation of colored Cu(II)-(AcSHA)₂ complex. The optimum conditions for the chromogenic reaction of Cu(II) with AcSHA is studied and the colored (green) complex is selectively monitored at λ_max 700 nm. With the reagent carrier solvent (dimethylsulfoxide (DMSO) and acetate buffer, pH 4.2) flow-rate of 1 ml min⁻¹, a detection limit (2S) of 1 μg l⁻¹ Cu(II) was obtained at a sampling rate of 80 sample h⁻¹. The calibration graph was linear in the Cu(II) concentration range 5-120 μg l⁻¹. The relative standard deviation (n=10) was 0.64% for a sample containing 60 μg l⁻¹ Cu(II). The detailed study of various interferences confirmed the high selectivity of the developed method. The method was successfully applied to determine trace amounts of copper(II) in river and seawater samples. The accuracy of the method was demonstrated by the analysis of standard reference materials C12X3500 and C14XHS 50.     

Acyl derivatives of 3-amino-1,2,4-triazole

Only 3-acylamino-1,2,4-triazoles were isolated in the acylation of 3-amino-1,2,4-triazole with acid chlorides that contain strong electron acceptor substituents. Acylation takes place in the 2 position when aliphatic and aromatic acid chlorides are used as the acylating agents. The action of methoxy- and ethoxyformyl chlorides leads to the formation of 1- and 2-alkoxycarbonyl-3-amino-1,2,4-triazoles. When N-acyl-3-amino-1,2,4-triazoles are heated, they undergo intermolecular trans-aminoacylation to 3-acylamino-1,2,4-triazoles, which exist in the solid phase in the form of amido and imido tautomers. Under the conditions of massspectroscopic analysis the percentage of the imido form increases as the electronacceptor capacity of the substituent increases.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1414–1419, October, 1980.     

Syntheses and spectroscopic studies on zinc(II) and mercury(II) complexes of isatin-3-thiosemicarbazone

Zinc(II) and mercury(II) complexes were prepared by reacting isatin-3-thiosemicarbazone (ISTSCH) with zinc(II) acetate or mercury(II) bromide. The complexes were characterized by IR, Raman, diffuse reflectance, ¹H and ¹³C NMR spectra and elemental analysis. Tetrahedral structures for Zn(ISTSC)₂ and Hg(ISTSCH)Br₂ are suggested.     

Preparation and Spectral Investigation of Bis[N(2-methyl-phenyl) 4-Nitro-thiobenzamidato] mercury(II), Bis[N(2-methoxy-phenyl) 4-Nitro-thiobenzamidato]mercury(II), and Bis[N(2-chloro-phenyl) 4-Nitro-thiobenzamidato]mercury(II) Complexes

Several preparative routes to bis[N(substituted-phenyl) 4-nitro-thiobenzamidato] mercury(II) complexes are presented, including the reaction of mercury(II) oxide, fluoride, chloride, bromide, cyanide, acetate, and nitrate with N(substituted-phenyl) 4-nitro-thiobenzamide derivatives. ¹ H-NMR, Raman, and IR measurements confirmed the complexation of mercury to sulphur.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.     

Coamplexation of mercury(II) compounds by crown ethers in organic media

Complexes between crown ethers having ring sizes of 15–24 atoms and 5 to 8 oxygens with HgX₂ species (X = Cl, I, CN, SCN) have been prepared and studied. Interactions of the substituents X bound to mercury with groups or fragments in the crown compound are essential in determining the characteristics and stability of the complexes formed. Complexes with crowns of 18C6 ring sizes are the most favourable except for HgX₂ compounds for which the size of X is larger than the macrocycle ring, as is the case for X = CF₃.     

Stopped-flow spectrophotometric determination of nM level of Pb(II) using 5,10,15,20-terakis(1-methylpyridinium-4-yl)porphine

A spectrophotometric determination method for nM levels of Pb(II) has been developed using a stopped-flow spectrophotometer with cationic water-soluble porphyrin. The stopped-flow spectrophotometer allows the monitoring of the incorporation reaction of the Pb(II) ion into 5,10,15,20-terakis(1-methylpyridinium-4-yl)porphine (TMPYP) within a narrow time window (2.5 s) at pH 10.5–12.0 before the Pb-TMPYP complex is replaced with other foreign metal ions, since usually the Pb-TMPYP complex is very labile and readily replaced with other metal ions. This improved the selectivity of Pb(II) determination as compared to the conventional spectrophotometric determination of Pb(II) using water-soluble porphyrins.     

Some neutral three-coordinate complexes of mercury(II) halides and pseudohalides with N-methylnicotinamide

Coordination compounds of mercury(II) chloride, bromide, cyanide and thiocyanate with N-methylnicotinamide, a potentially bidentate ligand, have been prepared. The complexesisolated have 1∶1 (metal:ligand)stoichiometry. Molecular weight measurements in molten camphor indicate that the mercury (II) chloride and bromide complexes are monomeric. Based on conductance values, molecular weight determinations and infrared spectral data, it is inferred that in the solid state in all these complexes the metal ion has a coordination number three and is bonded to the N-methylnicotinamide via its pyridine ring nitrogen, and is terminally bonded to the halogen/pseudohalogens.     

Analytical Use of Copper (II)-Neocuproine in The Spectrophotometric Determination of Hydrazines

Abstract

This work characterizes a newly developed, sensitive and convenient spectrophotometric procedure for determination of sub-ppm concentrations of hydrazine and its organic derivatives. The method is based on formation of the cuprous neocuproine chelate after reaction of hydrazines with a prepared aqueous solution of the copper (II)-neocuproine complex. The cuprous chelate is then directly measured in aqueous solution at 458 nm. The effect of several experimental conditions influencing the reaction are presented and the method was employed for the analyis of 5 different hydrazine compounds. The standard deviation did not exceed ± 0.47%.     

Analytical properties of 1-phenyl-1,2-propanedione-2-oxime thiosemicarbazone: simultaneous spectrophotometric determination of copper(II) and nickel(II) in edible oils and seeds

The analytical properties of 1-phenyl-1,2-propanedione-2-oxime thiosemi-carbazone (PPDOT) are described for the first time. The reagent gives colour reactions with copper(II) and nickel(II) in sodium acetate-acetic acid buffer medium. The copper complex shows maximum absorbance at 465 nm while the nickel complex at 395 nm. Therefore, these colour reactions have been advantageously used for the simultaneous spectrophotometric determination of copper(II) and nickel(II) in synthetic mixture and also in edible oils and seeds.     

Synthesis,structure and characterization of copper(II) and zinc(II) complexes based on 3-carboxyl-1,2,4-triazole

Two complexes [CuL₂(H₂O)₂] (1) and [ZnL₂(H₂O)₂] (2) (L?=?3-carboxyl-1,2,4-triazole (L)) have been synthesized and characterized by single-crystal X-ray diffraction analysis. Compound 1 crystallizes in the monoclinic space group P ₂(1)/n, a?=?8.632(8)?Å, b?=?9.153(8)?Å, c?=?6.991(7)?Å, β?=?94.279(12)°, Z?=?2, R ₁?=?0.0296, wR ₂?=?0.0918. Compound 2 also crystallizes in the monoclinic space group P ₂(1)/n, a?=?4.937(3)?Å, b?=?18.107(10)?Å, c?=?6.344(4)?Å, β?=?106.839(7)°, Z?=?2, R ₁?=?0.0230, wR ₂?=?0.0556. Extensive intermolecular hydrogen bonds assemble 1 and 2 into three-dimensional (3D) supramolecular architectures, with eight-member H-bonded synthons. Compounds 1 and 2 were also characterized by element analysis, FT–IR, luminescence and EPR studies.     

Syntheses,crystal structures,and spectral properties of Mn(II) and Co(II) complexes with 3-(p-chlorophenyl)- 4-(p-methylphenyl)-5-(2-pyridyl)-1,2,4-triazole

Two new complexes, trans-[MnL₂(NCS)₂] (1) and trans-[CoL₂(H₂O)(EtOH)](ClO₄)₂?·?H₂O (2) with asymmetrical triaryltriazole ligands [L?=?3-(p-chlorophenyl)-4-(p-methylphenyl)-5-(2-pyridyl)-1,2,4-triazole], have been synthesized and characterized by elemental analysis, FT-IR, ESI-MS, and single-crystal X-ray diffraction. In the complexes each L adopts a chelating bidentate mode via the nitrogen of pyridyl and triazole. Both complexes have a similar distorted octahedral core with two NCS^? ions in the trans position in 1, while one H₂O and one EtOH are present in the axial sites in 2.     

Complexing reactions in the Ni(II)-5-methyl-4-amino-3-thiooxo-1,2,4-triazapentene-1-methanal and Ni(II)-5-methyl-4-amino- 3-thiooxo-1,2,4-triazapentene-1-propanone triple systems

Complexing processes in the Ni^II-TTA-methanal (A) and Ni^II-TTA-propanone (B) triple systems (TTA–5-methyl-4-amino-3-thiooxo-1, 2, 4-triazapentene-1) in ethanol solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix have been studied. In the Ni^II-TTA- methanal system, formation of Ni^II oligomeric coordination compounds in which metal chelate cycles are connected by–H₂C–O–CH₂–structural groups, takes place. In the Ni^II-TTA-propanone triple system, formation of only Ni^II complexes with TTA takes place. No complexing process in the triple systems in nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix was found.     

Synthesis,crystal structure,Hirshfeld surfaces,and spectral properties of Cu(II) and Co(II) complexes with 3-phenoxymethyl-4-phenyl-5-(2-pyridyl)-1,2,4-triazole

A new asymmetrical substituted triazole, 3-phenoxymethyl-4-phenyl-5-(2-pyridyl)-1,2,4-triazole (L) and its complexes, cis-[Cu₂ L ₂Cl₄]·2CH₃CN (1) and trans-[CoL ₂Cl₂]·2H₂O·2CH₃CN (2), have been synthesized and characterized by IR, single-crystal X-ray diffraction, thermogravimetric analyses and Hirshfeld surfaces. In the structure, two L are mainly stabilized by an intermolecular C–H?N hydrogen bond. In 1 (or 2), each L involves a doubly-bidentate (or chelating bidentate) coordination mode through one pyridine and two nitrogens (or one) of triazole, respectively. Complex 1 has a distorted trigonal bipyramidal [CuN₃Cl₂] core with two cis Cl^? while 2 shows a distorted octahedron [CoN₄Cl₂] with two trans Cl^?. We also prepared molecular Hirshfeld surface and fingerprint plot for L, 1 and 2, which revealed the influence of different metals on coordinate of L.     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Cloud Point Extraction Simultaneous Spectrophotometric Determination of Zn(II), Co(II) and Ni(II) in Water and Urine Samples by 1-(2-Pyridylazo)2-Naphthol Using Partial Least Squares Regression

A cloud-point extraction (CPE) process using the nonionic surfactant Triton X-114 to simultaneous extraction and spectrophotometric determination of Zn(II), Co(II) and Ni(II) from aqueous solution using partial least squares (PLS) regression is investigated. The method is based on the color reaction of these cations with 1-(2-pyridylazo)2-naphthol and subsequent micelle-mediated extraction of products. The optimum extraction and reaction conditions such as pH, reagents concentration and effect of time have been studied. Linearity was obeyed in the range 2–150, 5–250 and 2–150 ng mL⁻¹ of Zn(II), Co(II) and Ni(II) respectively. The relative standard error (RSE) for the simultaneous determination of 15 test samples of different concentrations of Zn(II), Co(II) and Ni(II) was 4.38%;, 1.18% and 2.42%, respectively. The total relative standard error (RSE_t) for applying the PLS method to 15 synthetic samples in the linear ranges of these metals was 2.36%. The interference effect of some anions and cations was also tested. The method was applied to the simultaneous determination of Zn(II), Co(II) and Ni(II) in water and human urine samples.     

2-(2-Thiazolylazo)-p-cresol(TAC) as a Reagent for the Spectrophotometric Determination of Lead(II)

Abstract

The reaction between lead(II) and 2-(2-Thiazolylazo)-p-Cresol(TAC) in the presence of TERGITOL NPX (4 mg/ml) at an apparent pH 9.0–10.0 results in an intensely colored complex which is stable for at least 4 hr.

The composition of the complex is 1:2 cation: TAC and the log of the formation constant is 11.92 ± 0. 40. Beer's law is obeyed up to 6.0μg.ml^?1 of lead(II) at 650nm.

The apparent molar absorptivity at 650 nm is 2.07 × 10⁴ 1. mole^?1.cm^?1 and the detection limit was obtained as 10.0 ng.ml^?1 of lead(II).

The method is applied to determination of lead(II) in copper-base alloy.