Synthesis, characterization, and self-assembly of protein lysozyme monolayer-stabilized gold nanoparticles

Lysozyme monolayer-protected gold nanoparticles (Au NPs) which are hydrophilic and biocompatible and show excellent colloidal stability (at low temperature, ca. 4 degrees C), were synthesized in aqueous medium by chemical reduction of HAuCl4 with NaBH4 in the presence of a familiar small enzyme, lysozyme. UV-vis spectra, transmission electron microscopy (TEM), atomic force microscopy, and X-ray photoelectron spectroscopy characterization of the as-prepared nanoparticles revealed the formation of well-dispersed Au NPs of ca. 2 nm diameter. Moreover, the color change of the Au NP solution as well as UV-vis spectroscopy and TEM measurements have also demonstrated the occurrence of Ostwald ripening of the nanoparticles at low temperature. Further characterization with Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering indicated the formation of a monolayer of lysozyme molecules on the particle surface. FTIR data also indicated the intactness of the protein molecules coated on Au NPs. All the characterization results showed that the monodisperse Au NPs are well-coated directly with lysozyme. Driven by the dipole-dipole attraction, the protein-stabilized Au NPs self-assembled into network structures and nanowires upon aging under ambient temperature. On the basis of their excellent colloidal stability, controlled self-assembly ability, and biocompatible surface, the lysozyme monolayer-stabilized Au NPs hold great promise for being used in nanoscience and biomedical applications.     

电化学和紫外-可见吸收光谱法研究pH和金纳米粒子对细胞色素c的影响

制备了粒径均匀、平均粒子尺度为(4.7±0.6)nm,表面修饰3-巯基丙酸(MPA)的金纳米粒子(AuNPs).利用电化学和紫外-可见(UV-Vis)吸收光谱研究了pH和AuNPs对细胞色素c(Cytc)结构的影响.UV-Vis吸收光谱结果表明,pH为7.5-3.0时,Cytc和Cytc-AuNPs复合物的结构没有发生明显变化.当pH=2.0时,Cytc和Cytc-AuNPs复合物的Soret谱峰位置均发生明显移动,说明pH诱导其构象发生变化.循环伏安(CV)结果表明,表面修饰了MPA的AuNPs能促进Cytc和电极之间的电子传输,与修饰了柠檬酸根的AuNPs相比,其生物兼容性更好.pH的变化会引起CV中Cytc峰电流的改变和峰电位的移动.随着pH值的降低,Cytc电活性的量逐渐减小,并且pH诱导Cytc发生不可逆变性.AuNPs的引入使自由态的Cytc耐酸性增强,而使得吸附态的Cytc耐酸能力减弱.     

Density functional analysis of geometries and electronic structures of gold-phosphine clusters. The case of Au4(PR3)42+ and A(u4μ2-I)2(PR3)4

Geometries, ligand binding energies, electronic structure, and excitation spectra are determined for Au(4)(PR(3))(4)(2+) and Au(4)(μ(2)-I)(2)(PR(3))(4) clusters (R = PH(3), PMe(3), and PPh(3)). Density functionals including SVWN5, Xα, OPBE, LC-ωPBE, TPSS, PBE0, CAM-B3LYP, and SAOP are employed with basis sets ranging from LANL2DZ to SDD to TZVP. Metal--metal and metal--ligand bond distances are calculated and compared with experiment. The effect of changing the phosphine ligands is assessed for geometries and excitation spectra. Standard DFT and hybrid ONIOM calculations are employed for geometry optimizations with PPh(3) groups. The electronic structure of the gold--phosphine clusters examined in this work is analyzed in terms of cluster ("superatom") orbitals and d-band orbitals. Transitions out of the d band are significant in the excitation spectra. The use of different basis sets and DFT functionals leads to noticeable variations in the relative intensities of strong transitions, although the overall spectral profile remains qualitatively unchanged. The replacement of PMe(3) with PPh(3) changes the nature of the electronic transitions in the cluster due to low-lying π*-orbitals. To reproduce the experimental geometries of clusters with PPh(3) ligands, computationally less expensive PH(3) or PMe(3) ligands are sufficient for geometry optimizations. However, to predict cluster excitation spectra, the full PPh(3) ligand must be considered.     

金纳米颗粒在不同包裹介质中的超快等离子体动力学

Herein, we prepared four samples, namely gold/poly(sodium-p-styrenesulfonate) (Au/PSS), gold/silicon dioxide (Au/SiO₂), gold/titanium dioxide (Au/TiO₂), and gold/cuprous oxide (Au/Cu₂O) core/shell nanocomposites, to investigate how the surrounding medium affects the ultrafast plasmon dynamics of Au nanoparticles (NPs). We recorded femtosecond transient absorption spectra of Au NPs in Au/PSS, Au/SiO₂, Au/TiO₂, and Au/Cu₂O core/shell nanocomposites at various time delays. We found that the spectral features in the femtosecond transient absorption spectra of Au NPs in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites were dramatically different from those of Au NPs in Au/PSS and Au/SiO₂ core/shell nanocomposites. A comprehensive analysis of the ultrafast plasmon dynamics of Au NPs in the core/shell nanocomposites revealed that following excitation of the resonance plasmon band of Au NPs, the exited electrons could be efficiently transferred into the conduction bands of TiO₂ and Cu₂O in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites.     

Hyperbranched polyglycidol assisted green synthetic protocols for the preparation of multifunctional metal nanoparticles

Biocompatible hyperbranched polyglycidol (HBP) has been demonstrated to be an effective reducing and stabilizing agent for the synthesis of highly water-soluble monometallic (Au, Ag, Pt, Pd, and Ru) and bimetallic (Au/Pt, Au/Pd, and Au/Ru) nanoparticles (NPs), which provides a general and green protocol to fabricate metal NPs. The HBP-assisted reduction of metal ions follows an analogous polyol process. The reduction reaction rate increases sharply by increasing the temperature and the molecular weight of HBP. The size of NPs is controllable simply by changing the concentration of the metal precursor. High molecular weight HBP is favorable for the formation of NPs with uniform size and improved stability. By utilizing hydroxyl groups in the HBP-passivation layer of Au NPs, TiO(2)/Au, GeO(2)/Au, and SiO(2)/Au nanohybrids are also fabricated via sol-gel processes, which sets a typical example for the creation of versatile metal NPs/inorganic oxide hybrids based on the as-prepared multifunctional NPs.     

Ampholyte polystyrene spheres self-regulated deposition of noble metal nanoparticles for catalyst applications

The polystyrene (PS) spheres having dual functional groups were synthesized using emulsifier-free emulsion polymerization based on St/potassium persulfate/water system in the presence of V-50 as co-initiator. Fourier transform infrared (FTIR) confirms the presence of the sulfate and the amino groups on the surfaces of PS spheres. Transmission electron microscopy and X-ray photoelectron spectra revealed that the PS spheres were successfully deposited with catalytic palladium (Pd) or gold (Au) nanoparticles (NPs). The reduction of 4-nitroaniline to 4-phenylenediamine used as a model reaction was performed for catalysis studies and examined by ultraviolet. It was found that both Au and Pd PS dispersions show high catalytic activity. The Pd PS dispersion of 200 μl with only Pd content of 1.09 wt.% exhibits an excellent catalytic effect superior to the commercial Pd/C catalyst, i.e., less than 35 s taken for the completion of the reduction of 4-nitroaniline.     

Size-dependence of Fermi energy of gold nanoparticles loaded on titanium(iv) dioxide at photostationary state

TiO(2) particle-supported Au nanoparticles (NPs) with varying sizes and good contact (Au/TiO(2)) were prepared under a constant loading amount by the deposition-precipitation method. The Fermi energy of Au NPs loaded on TiO(2) at the photostationary state (E(F)') was determined in water by the use of S/S(2-) having specific interaction with Au as a redox probe. The E(F)' value goes up as the mean size of Au NPs (d) increases at 3.0 相似文献   

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Polyethylenimine‐assisted Synthesis of Au Nanoparticles for Efficient Syngas Production

The ability to capture, store, and use CO₂ is important for remediating greenhouse‐gas emissions and combatting global warming. Herein, Au nanoparticles (Au‐NPs) are synthesized for effective electrochemical CO₂ reduction and syngas production, using polyethylenimine (PEI) as a ligand molecule. The PEI‐assisted synthesis provides uniformly sized 3‐nm Au NPs, whereas larger irregularly shaped NPs are formed in the absence of PEI in the synthesis solution. The Au‐NPs synthesized with PEI (PEI?Au/C, average PEI Mw=2000) exhibit improved CO₂ reduction activities compared to Au‐NPs formed in the absence of PEI (bare Au NPs/C). PEI?Au/C displays a 34 % higher activity toward CO₂ reduction than bare Au NPs/C; for example, PEI?Au/C exhibits a CO partial current density (j_CO) of 28.6 mA cm^?2 at ?1.13 V_RHE, while the value for bare Au NPs/C is 21.7 mA cm^?2; the enhanced j_CO is mainly due to the larger surface area of PEI?Au/C. Furthermore, the PEI?Au/C electrode exhibits stable performance over 64 h, with an hourly current degradation rate of 0.25 %. The developed PEI?Au/C is employed in a CO₂‐reduction device coupled with an IrO₂ water‐oxidation catalyst and a proton‐conducting perfluorinated membrane to form a PEI?Au/C|Nafion|IrO₂ membrane‐electrode assembly. The device using PEI?Au/C as the CO₂‐reduction catalyst exhibits a j_CO of 4.47 mA/cm² at 2.0 V_cell. Importantly, the resulted PEI?Au/C is appropriate for efficient syngas production with a CO ratio of around 30–50 %.     

Facile aqueous synthesis and stabilization of nearly monodispersed gold nanospheres by poly(L‐proline)

A facile strategy is developed to synthesize Au nanoparticles (Au‐NPs) using water‐soluble poly(L ‐proline) (PLP). The synthesized NPs were characterized by TEM, FTIR and NMR spectroscopy, thermogravimetric analysis, and circular dichroism. It was found that PLP has a “dual” role as an efficient reductant of Au(III) and simultaneously as a stabilizing agent of Au‐NPs. The influence of PLP molecular weight, temperature, initial Au(III) concentration, and Au(III)/PLP molar ratio on the size and dispersity of Au‐NPs is examined. It was found that the unique extended secondary structure of PLP II resulted in the facile formation of highly crystalline Au‐NPs in water at a very low Au(III)/PLP molar ratio. These Au‐NPs have the smallest dimensions and size distributions among NPs synthesized so far by polymeric materials in aqueous media, and exhibit enduring colloidal stability. Therefore, by utilizing biocompatible and benign materials in water, we managed to obtain Au‐NPs, so as the final product is ready‐to‐use for biomedical applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Using Size-Exclusion Chromatography to Monitor the Stabilization of Au Nanoparticles in the Presence of Salt and Organic Solvent

This paper reports the use of size-exclusion chromatography (SEC) to assess the size stabilization of Au nanoparticles (NPs) in the presence of salt and organic solvent. In the absence of an adequate stabilizer for the Au NP solution, the presence of salt (NaCl) or an organic solvent (MeOH) resulted in the near disappearance of the signal of the Au NPs in the elution spectra after SEC separation, as a result of the Au NPs forming larger agglomerates under such conditions. In contrast, when the Au NPs were capped with an adequate stabilizer [i.e., 3A-amino-3A-deoxy-(2AS,3AS)-β-cyclodextrin (H₂N-β-CD)], the elution time of the signal for the Au NPs and their elution spectra after SEC separation were barely affected by the presence of salt or organic solvent. Thus, H₂N-β-CD is a good stabilizer against the coagulation of Au NPs in the presence of salt or organic solvent. In addition, this study confirms that SEC—with its short analysis times, low operating costs, automated operation, and in situ analysis—is highly applicable for the rapid analysis of Au NPs.

     

A coordination cage hosting ultrafine and highly catalytically active gold nanoparticles

Ultrafine metal nanoparticles (MNPs) with size <2 nm are of great interest due to their superior catalytic capabilities. Herein, we report the size-controlled synthesis of gold nanoparticles (Au NPs) by using a thiacalixarene-based coordination cage CIAC-108 as a confined host or stabilizer. The Au NPs encapsulated within the cavity of CIAC-108 (Au@CIAC-108) show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108 (Au/CIAC-108). The cage-embedded Au NPs can be used as a homogeneous catalyst in a mixture of methanol and dichloromethane while as a heterogeneous catalyst in methanol. The homogeneous catalyst Au@CIAC-108-homo exhibits significantly enhanced catalytic activities toward nitroarene reduction and organic dye decomposition, as compared with its larger counterpart Au/CIAC-108-homo and its heterogeneous counterpart Au@CIAC-108-hetero. More importantly, the as-prepared Au@CIAC-108-homo possesses remarkable stability and durability.

The size-controlled synthesis of Au NPs was achieved by using a coordination cage CIAC-108 as a support. The Au NPs encapsulated within the cavity of CIAC-108 show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108.     

Surface-plasmon-enhanced band emission of ZnO nanoflowers decorated with Au nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower-like fashion, was synthesized by using a hydrothermal method. The temperature-dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Surface‐Plasmon‐Enhanced Band Emission of ZnO Nanoflowers Decorated with Au Nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower‐like fashion, was synthesized by using a hydrothermal method. The temperature‐dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Au nanoparticles and polyaniline coated resin beads for simultaneous catalytic oxidation of glucose and colorimetric detection of the product

In this letter, we report the synthesis of Au nanoparticles (NPs) and polyaniline (PANI) on the same cation-exchange resin beads and demonstrate their use in catalyzing the oxidation of glucose to gluconic acid by Au NPs and simultaneously in detecting the formation of the acid by the color change of PANI. The synthesis was carried out by exchanging the cations of the resins with HAuCl4 and anilinuium chloride and then reducing the metal ions by NaBH4 to produce Au NPs followed by polymerization of aniline using H2O2. The green emeraldine salt form of PANI thus obtained was treated with NaOH to be converted to blue emeraldine base before use. The deposition of Au NPs was confirmed by a change in color of the bead, visible spectroscopy, X-ray diffraction, and scanning electron microscopic measurements. On the other hand, the presence of PANI was confirmed by Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. The formation of gluconic acid from glucose was confirmed by FTIR spectroscopy. We could detect the presence of glucose of a minimum 1.0 mM concentration in water, using the present method. Our experimental observations demonstrate the possibility of the incorporation of multifunctional components on the surfaces of resins for carrying out a chemical reaction as well as detection of the product.     

Methionine Capped Nanoparticles as Acetylcholinesterase Inhibitors

The silver and gold L-methionine capped nanoparticles (Ag and Au @LM NPs) were analyzed as prospective acetylcholinesterase (AChE) inhibitors to test their potential in the treatment of cognitive impairment in depression and Alzheimer's disease. The stability of NPs, and their ability to inhibit AChE were studied by UV-Vis and FTIR spectrophotometry. At the same time, TEM and SEM measurements, DLS, and zeta potential measurements were employed in the structural characterization of NPs. Nearly spherical, negatively charged Ag and Au @LM NPs, with 17 nm and 31 nm in diameter, respectively, showed moderate inhibitory potential toward AChE in the given frame of investigated concentrations. For both NPs IC50 is not reached. Furthermore, the adsorption of enzyme molecules on the surface of Ag and Au @LM NPs was demonstrated. Hence, our assumption is that inhibition of AChE is caused by blockage of the enzyme‘s active site due to the steric hindrance of NPs.     

Alkanetelluroxide-protected gold nanoparticles

The synthesis and characterization of the first air-stable tellurium-containing ligand-protected gold nanoparticles (NPs) are reported. Although the synthesis largely followed the well-known Brust two-phase approach, the starting ligand was dioctyl ditelluride rather than alkanetellurol, which is an analogue of the widely used alkanethiol. Dioctyl ditelluride was used because alkanetellurol is unstable. The 1H and 13C NMR spectra, as well as infrared spectra (IR) of the formed Au NPs, indicated that the Te-Te bond in the starting ligand was broken but the octyl group was intact. This was further corroborated by the solid-state 125Te NMR spectrum that displayed a very broad and significantly downfield-shifted peak, indicating that tellurium was directly bound to the Au core. Furthermore, the O 1s and Te 3d XPS spectra of the Au NPs indicated that the capping ligands were octanetelluroxide. An average particle size of 2.7 nm diameter as measured by transmission electron microscopy (TEM) corresponded to an Au607 core. A two-step weight loss of approximately 22.2% in total was observed in the thermogravimetric analysis, which indicated about 53% ligand monolayer coverage (i.e., Au607(Te(=O)C8H17)133). Additionally, dioctyl ditelluride demonstrated an intriguing reductive power that led to a more sophisticated chemistry of forming the air-stable octanetelluroxide-protected gold NPs. It has been found that (1) when the ratio of Au to Te was about 1.5 a colorless intermediate state similar to Au(I)-SR (the intermediate state widely accepted in the synthesis of thiolate-protected Au NPs) could be obtained and (2) this kind of intermediate state played a key role in the formation of stable Au NPs.     

Degradation of Methyl Parathion,a common pesticide and fluorescence quenching of Rhodamine B,a carcinogen using β-d glucan stabilized gold nanoparticles

Natural carbohydrate polymer β-d-glucan extracted from Tricholoma crassum (Berk.) Sacc. predominantly linked by β-glycosidic bonds have been used to synthesize gold nanoparticles (Au NPs). As glucan is water soluble, the Au NPs are prepared in water medium, a green solvent. The morphology and characterization of the synthesized Au NPs have been confirmed by various techniques, like TEM, EDX, XRD, UV–Vis and FT-IR spectroscopic studies. The obtained Au NPs exhibits chemosensing property against Methyl Parathion, a group of highly toxic organophosphorous pesticide, extensively used as an agricultural chemical. Degradation of parathion using Au NPs lead to water-soluble products thereby reducing the toxicity of Methyl Parathion by disrupting the thiophosphate-ester linkage. The synthesized Au NPs also act as a good fluorescence quencher of Rhodamine B, a common fluorophore and carcinogenic compound, obeying Stern-Volmer equations. The β-d-glucan capped Au NPs are safe having possible medicinal usage.     

Biosynthesis of gold nanoparticles using Pseudomonas aeruginosa

Pseudomonas aeruginosa were used for extra-cellular biosynthesis of gold nanoparticles (Au NPs). Consequently, Au NPs were formed due to reduction of gold ion by bacterial cell supernatant of P. aeruginosa ATCC 90271, P. aeruginosa (2) and P. aeruginosa (1). The UV-vis and fluorescence spectra of the bacterial as well as chemical prepared Au NPs were recorded. Transmission electron microscopy (TEM) micrograph showed the formation of well-dispersed gold nanoparticles in the range of 15-30 nm. The process of reduction being extra-cellular and may lead to the development of an easy bioprocess for synthesis of Au NPs.     

新型耐甲醇氧还原电催化剂——氮掺杂中空碳微球@铂纳米粒子复合材料

通过模板法制备了一种新型耐甲醇氧还原电催化剂——氮掺杂中空碳微球@铂纳米粒子复合材料(HNCMS@PtNPs)。首先,将铂纳米粒子负载于氨基化二氧化硅微球上,获得PtNPs/SiO₂复合材料。然后通过多巴胺自聚合反应在PtNPs/SiO₂复合材料上包裹聚多巴胺(PDA)膜,将其在氮气气氛中直接进行碳化处理并通过氢氟酸溶液刻蚀去除SiO₂,获得了内嵌有PtNPs的氮掺杂中空碳微球,标记为HNCMS@PtNPs复合材料。采用扫描电子显微镜、透射电子显微镜、X射线衍射仪、拉曼光谱仪、比表面积分析仪和X射线光电子能谱仪对HNCMS@PtNPs复合材料的形貌和结构进行了表征。采用循环伏安法和线性扫描伏安法研究了HNCMS@PtNPs复合材料的电催化氧还原性能。结果表明：HNCMS@PtNPs催化剂的Pt载量高达11.9%(w,质量分数),对氧还原反应具有高电催化活性、高稳定性和优良的抗甲醇性能,是一种具有应用潜力的直接甲醇燃料电池(DMFCs)阴极电催化剂。