Experimental evidence of consecutive electron transfers for the Sb(III)−Sb(Hg) couple in 4 M H(Cl,ClO4) at low chloride concentrations

A dc polarographic and cyclic voltammetric study has been made of the reduction of Sb(III) ions from 0.01 M HCl+3.99 M HClO₄ and 0.001 M HCl+3.999 M HClO₄ supporting electrolytes in which a quasi-reversible, respectively irreversible behaviour is observed. It is shown that the Sb(III) reduction can be explained on the assumption of a reaction mechanism that consists of three successive one-electron transfers. Along the reduction wave the Sb(III)→Sb(II) and Sb(II)→Sb(I) step are rate determining, respectively at more negative and more positive potentials. Kinetic parameters were determined and the rate constants are shown to increase with chloride ion concentration.     

Electron transfer. 137. Formal potentials involving indium(II)

Aqueous solutions of indium(III) undergo 1e⁻ reductions by Sm(II) (E⁰-1.55 V) and by Yb(II) (−1.05 V), but not by U(III) (−0.52 V). The facile and irreversible reduction, by In⁺ _aq, of Ru(NH₃)₆ ³⁺ (E⁰+0.067 V) at reagent concentrations near 10⁻³ M implies a potential more negative than −0.23 V for In(II,I) and, in conjunction with the known value of −0.44 V for In(III,I), a complementary potential less negative than −0.65 V for In(III,II). These observations, taken together, support le⁻ indium potentials E_II,I ^o−0.2 V and E_III,II ⁰−0.6 V.     

Electrochemical and spectroscopic studies of Pu(IV) and Pu(III) in nitric acid solutions

Electrochemical and absorption spectroscopic properties of Pu(IV) and Pu(III) in nitric acid have been investigated by using cyclic voltammetry (CV) and UV–Visible spectroscopy. CV using a glassy carbon electrode suggested that the electrochemical reaction of Pu(IV) nitrate complexes were found to be a quasi-reversible reduction to Pu(III) species. The formal redox potentials (E ⁰) for Pu(IV)/Pu(III) couples were +0.721, +0.712, +0.706, +0.705, +0.704, 0.694, and +0.696 V (vs. Ag/AgCl) when nitric acid concentrations are 1–7 M nitric acid solutions, respectively. These results indicate that the reduction product of Pu(IV) is only Pu(III). Further details for reaction mechanism of Pu(IV) were discussed on the basis of digital simulation of the experimental cyclic voltammograms. The absorption spectroscopic properties of Pu(III) and Pu(IV) in nitric acid solutions were investigated with UV–Visible spectrophotometry. As a result, it was founds that the intensities of the characteristic absorption peaks of Pu(III) and Pu(IV) tend to decrease with increasing nitric acid concentration for 1–8 M, and the peaks positions shifted longer or shorter wavelengths depending on the complex-forming abilities of Pu(III) and Pu(IV) with an increase in the nitric acid concentration.     

Cyclic voltammetry on Ag(111) and Ag(100) faces in sodium hydroxide solutions

The electrochemical behavior of silver (100) and (111) single crystal surfaces was examined by cyclic voltammetry in aqueous NaOH solution. In the `double layer' region (between −1.2 and 0.1 V (SCE)) adsorption of OH⁻ ions followed by phase transformation into an Ag–OH monolayer was found to take place. The difference in peak potentials recorded in 0.1 and 0.01 mol dm⁻³ NaOH solutions of about 60 mV indicates that one electron is exchanged in the overall electrochemical reaction, implying a complete charge transfer between OH⁻ ions and the silver surface. The adsorption process has been modeled to a Frumkin adsorption isotherm. Further oxidation of silver into Ag₂O takes place at more positive potentials. The formation of bulk Ag₂O results in considerable change to the original single crystal surface. This is likely to be due to roughening of the silver surface as a consequence of the formation and reduction of the oxide.     

Synthesis,electrochemistry and in situ spectroelectrochemistry of a new Co(III) thio Schiff-base complex with N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane

A new cobalt Schiff-base complex, [Co(L)(OH)(H₂O)] (where L = [N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane), was synthesized and its electrochemical and spectroelectochemical properties were investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and thin-layer spectro-electrochemistry in solutions of dimethyl sulfoxide (DMSO) and dichloromethane (CH₂Cl₂). The [Co(L)(OH)(H₂O)] complex displays two well-defined reversible reduction processes with the corresponding anodic waves. The half-wave potentials of the first and second reduction processes were displayed at E_1/2 = 0.08 V and E_1/2 = −1.21 V (scan rate: 0.100 Vs⁻¹) in DMSO, and E_1/2 = −0.124 V and E_1/2 = −1.32 V (scan rate: 0.100 Vs⁻¹) in CH₂Cl₂. The potentials of the reduction processes in DMSO are shifted toward negative potentials (0.220–0.112 V) compared to those in CH₂Cl₂. The electrochemical results are assigned to two one-electron reduction processes; [Co(III)L] + ⁻e → [Co(II)L]⁻ and [Co(II)L]⁻ + ⁻e → [Co(I)L]²⁻. The six-coordination of the complex remains unchanged during the reduction processes and the electron transfer processes were not followed by a chemical reaction upon scan reversal. It was also seen that [Co(L)(OH)(H₂O)] was reduced at a more positive potential than the corresponding salen analogs. The shift and reversibility are apparently related to the high degree of electron delocalization of the [Co(L)(OH)(H₂O)] complex, having a N₂O₂S₂ donor set and two additional benzene units. Additionally, in situ spectroelectrochemical measurements support Co(III)/Co(II) and Co(II)/Co(I) reversible reduction processes with the observation of the corresponding spectral changes with the applied potentials E_app = −0.40 and −1.60 V. Application of the spectroelectrochemical results allowed the determination ofE_1/2 and n (the number of electrons) from the spectra of the fully oxidized and reduced species in one unified experiment as well. The results obtained by this method are in agreement with those by the CV and DPV methods.     

Synthesis,spectral, electrochemical and magnetic properties of new symmetrical and unsymmetrical dinuclear copper(II) complexes derived from binucleating ligands with phenol and benzimidazole donors

New symmetrical 2,6-bis{N-[2-(2-benzimidazolyl)-phenyl]iminomethyl}-4-methylphenol (L¹) and unsymmetrical 2-N-[2-(2-benzimidazoyl)phenyl]iminomethyl-6-[(4-methylpiperazin-1-yl)-methyl]-4-methylphenol (L²) binucleating ligands have been synthesized. Complexation of these ligands with Cu(II) perchlorate and appropriate sodium salt offered the binuclear copper(II) complexes, [Cu₂L(X)](ClO₄)₂, (X=Cl, OH and OAc 1–6). Their spectral, electrochemical and magnetic properties have been studied. Two distinct reduction peaks were observed at negative potentials. The electrochemical data shows that the complexes of L² undergo reduction at less negative potential (E¹_pc=−0.15 to −0.25 V, E²_pc=−0.45 to −0.65 V) when compared to the complexes of L¹ (E¹_pc=−0.45 to −0.58 V, E²_pc=−1.07 to −1.103 V). A variable temperature magnetic study on the complexes of the ligand L¹ showed strong antiferromagnetic coupling between the copper atoms (−2J=285–295 cm⁻¹), in contrast, the complexes of the ligand L² showed weak antiferromagnetic interaction (−2J=60–85 cm⁻¹). Electron spin resonance (ESR) spectra (RT) of the complexes of ligand L¹ showed no signal and the complexes of ligand L² showed a broad feature.     

Solvent effects on the electrode kinetics of simple redox couples: Investigations on the electrochemical behaviour of the V(III)/V(II) system in water + acetonitrile mixtures

Parallel optical and electrochemical studies on the V(III)/V(II) system in H₂O + acetonitrile (AN) + CF₃SO₃H mixtures have been performed. It was found, on the basis of the spectra of vanadium ions in the visible range, that V(III) was totally hydrated in mixtures up to x_AN ⋍ 0.6 while V(II) was specifically solvated by AN molecules, even at a molar fraction of acetonitrile in H₂O + AN mixtures as low as 0.02. In agreement with this, the formal potentials of the V(III)/V(II) system expressed versus the ferrocene electrode move to less negative potentials with an increase in AN concentration.Straightforward correlations of the electrode kinetics of the V(III)/V(II) system at a mercury electrode in H₂O + AN mixtures with both the electrode surface coverage by AN molecules and the resolvation of vanadium ions in the bulk solution were found.     

Spectrophotometric determination of copper with α, β, γ, δ-tetraphenylporphine trisulfonate

Water-soluble porphyrin, α, β, γ, δ-tetraphenylphorphine trisulfonate (TPPS, H₂R), was found to be a very useful agent for both the direct spectrophotometric determination and the photometric titration of copper(II). The molar absorptivity of H₄R²⁺ at 434 nm is 5.0·10⁵ and the spectrophotometric sensitivity is 0.00013 μg Cu cm^?2 for A=0.001. Beer's law is followed in the range 0.006 μg–0.06 μg Cu ml^?1. Among twenty-two elements examined, only zinc(II) seriously interfered. Acid dissociation constants and salt effects on the spectra of TPPS were evaluated.     

Direct electrochemistry and spectroelectrochemistry of osmium substituted horseradish peroxidase

In this contribution the substitution of the central protoporphyrin IX iron complex of horseradish peroxidase by the respective osmium porphyrin complex is described. The direct electrochemical reduction of the Os containing horseradish peroxidase (OsHRP) was achieved at ITO and modified glassy carbon electrodes and in combination with spectroscopy revealed the three redox couples Os^IIIHRP/Os^IVHRP, Os^IVHRP/Os^VHRP and Os^VHRP/Os^VIHRP. The midpoint potentials differ dependent on the electrode material used with E_1/2 (Os^III/IV) of − 0.4 V (ITO) and − 0.25 V (GC), E_1/2 (Os^IV/^V) of − 0.16 V (ITO) and + 0.10 V (GC), and E_1/2 (Os^V/VI)of + 0.18 V (ITO), respectively. Moreover, with immobilised OsHRP the direct electrocatalytic reduction of hydrogen peroxide and tert-butyl hydroperoxide was observed. In comparison to electrodes modified with native HRP the sensitivity of the OsHRP-electrode for tert-butyl hydroperoxide is higher.     

Effect of Mn(II) and Ce(IV) Ions on the Oxidation of Lactic Acid by Chromic Acid

The kinetics and mechanism of lactic acid oxidation in the presence of Mn(II) and Ce(IV) ions by chromic acid were studied spectrophotometrically. The oxidation of lactic acid by Cr(VI) was found to proceed in two measurable steps, both of which gave pyruvic acid as the primary product in the absence of Mn(II). 2Cr(VI)+2CH₃CHOHCOOH → 2CH₃COCOOH+Cr(V)+Cr(III) Cr(V)+CH₃CHOHCOOH → Cr(III)+CH₃COCOOHThe observed kinetics was explained due to the catalytic and inhibitory effects of Mn(II) and Ce(IV) on the lactic acid oxidation by Cr(VI). The reactivity of lactic acid depends upon the experimental conditions. It acts as a two-or three-equivalent reducing agent in the absence or presence of Mn(II). It was examined that Cr(III) products resulting from the direct reduction of Cr(VI) by three-equivalent reducing agents. The oxidation of lactic acid follows the complex order kinetics with respect to [lactic acid]. The activation parameters E_a, ΔH^#, and ΔS^# were calculated and discussed.     

Redox transformations of adsorbed NO molecules on a Pt(100) electrode

The electrochemical behavior of adsorbed NO molecules on a Pt(100) electrode has been studied in perchloric acid solutions by means of cyclic voltammetry. According to the literature data, a saturated NO adlayer with a coverage of ～0.5 monolayers (MLs) is formed under open circuit conditions in an acidic nitrite solution as a result of a disproportionation reaction. The saturated adlayer is stable in the potential range of 0.4–0.9 V vs. a reversible hydrogen electrode in 0.1 M HClO₄. NO molecules are oxidized at 0.9–1.1 V with the formation of adsorbed nitrite anions, and they can be reduced to ammonia at potentials less than 0.4 V. In this paper it has been shown that the adlayer stability depends on the surface coverage and extent of ordering. An unsaturated NO adlayer demonstrates NO ? NH₃ redox transformations at 0.5–0.8 V.     

<Emphasis Type="Italic">In situ</Emphasis> XPS study of the size effect in the interaction of NO with the surface of the model Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/FeCrAl catalysts

The interaction of NO with the surface of model Ag/Al₂O₃/FeCrAl catalysts containing Ag nanoparticles of different size (1 and 3 nm) was studied. The use of the Auger parameter α_Ag (E _b(Ag3d_5/2) + E _kin(Ag MVV)) made it possible to reliably identify the change in the chemical state of silver cluster upon their interaction with О₂ and NO. The oxygen treatment leads to the oxidation of small Ag nanoparticles (1 nm) and formation of AgO _x clusters resulted in the intensive formation of nitrite—nitrate structures on the step of the interaction with NO. These structures are localized on both the silver clusters and Al₂O₃ surface. An increase in the size of Ag⁰ nanoparticles to 3 nm results in an increase in the stability of these structures and impedes the Ag⁰ → AgO _x transition, due to which the formation of surface groups NO₂ ^–/NO₃ ^– is suppressed. The data obtained make it possible to explain the dependence of the activity of the Ag/Al₂O₃ catalysts in the selective reduction of NO on the Ag nanoparticle size.     

Predicting Properties of Iron(III) TAML Activators of Peroxides from Their III/IV and IV/V Reduction Potentials or a Lost Battle to Peroxidase

A cyclic voltammetry study of a series of iron(III) TAML activators of peroxides of several generations in acetonitrile as solvent reveals reversible or quasireversible Fe^III/IV and Fe^IV/V anodic transitions, the formal reduction potentials (E°′) for which are observed in the ranges 0.4–1.2 and 1.4–1.6 V, respectively, versus Ag/AgCl. The slope of 0.33 for a linear E°′(IV/V) against E°′(III/IV) plot suggests that the TAML ligand system plays a bigger role in the Fe^III/IV transition, whereas the second electron transfer is to a larger extent an iron-centered phenomenon. The reduction potentials appear to be a convenient tool for analysis of various properties of iron TAML activators in terms of linear free energy relationships (LFERs). The values of E°′(III/IV) and E°′(IV V⁻¹) correlate 1) with the pK_a values of the axial aqua ligand of iron(III) TAMLs with slopes of 0.28 and 0.06 V, respectively; 2) with the Stern–Volmer constants K_SV for the quenching of fluorescence of propranolol, a micropollutant of broad concern; 3) with the calculated ionization potentials of Fe^III and Fe^IV TAMLs; and 4) with rate constants k_I and k_II for the oxidation of the resting iron(III) TAML state by H₂O₂ and reactions of the active forms of TAMLs formed with donors of electrons S, respectively. Interestingly, slopes of log k_II versus E°′(III/IV) plots are lower for fast-to-oxidize S than for slow-to-oxidize S. The log k_I versus E°′(III/IV) plot suggests that the manmade TAML catalyst can never be as reactive toward H₂O₂ as a horseradish peroxidase enzyme.     

Electrochemistry of lanthanides in molten chloroaluminates: Part I. The electrochemical behaviour of Eu(III), Yb(III) and Sm(III)

The electrochemical behaviour of Eu(III), Yb(III,II) and Sm(III,II) has been investigated in NaCl-AlCl₃ mixtures, in a temperature range between 150 and 250°C. Principal investigation methods are cyclic voltammetry, pulse polarography and chronoamperometry. The three tervalent lanthanides can be reduced reversibly and solutions of divalent oxidation states are stable. E_1/2 potentials measured with respect to an Al electrode in a saturated melt are located respectively at 2.295 V (Eu), 1.630 V (Yb) and 1.080 V (Sm). In acidic chloroaluminates, the three investigated lanthanides are more oxidizing than in other more complexing solvents. If the acidity of the melt is decreased, precipitation of the trichloride (or the dichloride) occurs and the solubility product of the different species is directly related to the cationic size.     

CO2 to CO Electroreduction,Electrocatalytic H2 Evolution,and Catalytic Degradation of Organic Dyes Using a Co(II) meso-Tetraarylporphyrin

The meso-tetrakis(4-(trifluoromethyl)phenyl)porphyrinato cobalt(II) complex [Co(TMFPP)] was synthesised in 93% yield. The compound was studied by ¹H NMR, UV-visible absorption, and photoluminescence spectroscopy. The optical band gap Eg was calculated to 2.15 eV using the Tauc plot method and a semiconducting character is suggested. Cyclic voltammetry showed two fully reversible reduction waves at E_1/2 = −0.91 V and E_1/2 = −2.05 V vs. SCE and reversible oxidations at 0.30 V and 0.98 V representing both metal-centred (Co(0)/Co(I)/Co(II)/Co(III)) and porphyrin-centred (Por²⁻/Por⁻) processes. [Co(TMFPP)] is a very active catalyst for the electrochemical formation of H₂ from DMF/acetic acid, with a Faradaic Efficiency (FE) of 85%, and also catalysed the reduction of CO₂ to CO with a FE of 90%. Moreover, the two triarylmethane dyes crystal violet and malachite green were decomposed using H₂O₂ and [Co(TMFPP)] as catalyst with an efficiency of more than 85% in one batch.     

Effect of pH on the electrochemical reduction of some heterocyclic quinones

The reduction of 1,10-phenanthroline-5,6-quinone(I), 5,8-quinolinequinone(II) and 6,7-dichloro-5,8-quinolinequinone(III) was investigated using cyclic voltammetry and coulometry at mercury electrodes and 50% dimethylsulfoxide+water solvent. Each compound is reduced to the corresponding hydroquinone in a diffusion-controlled, reversible two-electron process. The pH-dependence of the reversible potential indicated that the quinone forms were unprotonated, but the hydroquinones could be protonated at the heterocyclic nitrogen atom with pK_a = 5.3 for I and 3.5 for III. Careful analysis of the cyclic voltammetric peak shape revealed that the difference between the standard potentials for the introduction of successive electrons, E₂⁰ ? E₁⁰, was 70 ±20, >100 and 80 ± 20 mV for I–III. Investigation of the pH-dependence of E₁⁰ and E₂⁰ showed that the pK_a of the semiquinone of I was about 8.     

The voltammetric behaviour of solid 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles

The electrochemical behaviour of 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles, attached to a graphite electrode and adjacent to an aqueous electrolyte solution, has been studied by cyclic voltammetry. DPPH exhibits one reversible redox couple with a formal potential of 0.340 V versus Ag|AgCl (pH=7.0). At more positive potentials, a redox couple appears with a formal potential E_f=0.733 V versus Ag|AgCl. The oxidation at this potential is followed by an irreversible chemical reaction generating a product which gives a redox couple with a formal potential at 0.177 V versus Ag|AgCl. The reduction process of this couple is followed by a slow chemical reaction in the course of which DPPH is reformed.     

Porphyrin Nanorods Modified Glassy Carbon Electrode for the Electrocatalysis of Dioxygen,Methanol and Hydrazine

Porphyrin nanorods (PNR) were prepared by ionic self‐assembly of two oppositely charged porphyrin molecules consisting of free base meso‐tetraphenylsulfonate porphyrin (H₄TPPS₄^2?) and meso‐tetra(N‐methyl‐4‐pyridyl) porphyrin (MTMePyP⁴⁺M=Sn, Mn, In, Co). These consist of H₄TPPS₄^2?? SnTMePyP⁴⁺, H₄TPPS₄^2?? CoTMePyP⁴⁺, H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods. The absorption spectra and transmission electron microscopic (TEM) images of these structures were obtained. These porphyrin nanostructures were used to modify a glassy carbon electrode for the electrocatalytic reduction of oxygen, and the oxidation of hydrazine and methanol at low pH. The cyclic voltammogram of PNR‐modified GCE in pH 2 buffer solution has five irreversible processes, two distinct reduction processes and three oxidation processes. The porphyrin nanorods modified GCE produce good responses especially towards oxygen reduction at ?0.50 V vs. Ag|AgCl (3 M KCl). The process of electrocatalytic oxidation of methanol using PNR‐modified GCE begins at 0.71 V vs. Ag|AgCl (3 M KCl). The electrochemical oxidation of hydrazine began at around 0.36 V on H₄TPPS₄^2?? SnTMePyP⁴⁺ modified GCE. The GCE modified with H₄TPPS₄^2?? CoTMePyP⁴⁺ H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods began oxidizing hydrazine at 0.54 V, 0.59 V and 0.56 V, respectively.     

Tetrathiafulvalene Porphyrins

Four tetrathiafulvalene (TTF)‐annulated porphyrins 1 – 4 were synthesized and characterized. All contain a tetraphenylporphyrin (TPP) core onto which four, two, or one TTF subunits were annulated. Absorption and fluorescence spectroscopic studies together with electrochemical investigations reveal that interactions between the porphyrin system and the annulated TTF units take place in solution. The annulation of one or more TTF units to the porphyrin core has a profound effect on the reduction potentials associated with this latter framework, with positive shifts in the range of 0.105 to 0.355 V and 0.200 to 0.370 V for the first and second reduction potential, respectively, compared to the corresponding processes in the model compound TPP, 18 . The redox potentials for the first oxidation of the TTF units are considerably shifted in 4 (ΔE_ox¹=+0.285 V) and 2 (ΔE_ox¹=?0.140 V), whereas for 1 and 3 these potentials remain within the region expected for a normal TTF unit. Considerable changes in the second oxidation potential associated with the TTF subunits were seen for 2 (ΔE_ox¹=?0.085) and 3 (ΔE_ox¹=?0.175). The emission spectra of 1 – 4 revealed that the porphyrin fluorescence is almost quenched in the neutral state of the TTF‐annulated porphyrins, a finding that is consistent with substantial electron transfer taking place from the TTF subunits to the porphyrin core. Oxidation of the TTF unit(s) (TTF→TTF^.+) present in 1 – 4 leads to the emission intensity being restored.     

Electrochemical Studies of a New Iron Porphyrin Entrapped in a Propylpyridiniumsilsesquioxane Polymer Immobilized on a SiO2/Al2O3 Surface

In this work, a new porphyrin, the 5,10,15,20‐tetrakis‐(2,6‐difluoro‐3‐sulfonatophenyl) porphyrinato iron(III) chloride (denoted as FeTsP) was immobilized on SiO₂/Al₂O₃ (SiAl) coated with n‐propylpyridiniumsilsesquioxane polymer (SiPy⁺Cl^?). The FeTsP was adsorbed on SiAl/SiPyCl by an ion exchange reaction, obtaining a modified solid, SiAl/SiPy/FeTsP, where the porphyrin complex was strongly adhered. Cyclic voltammograms of the SiAl/SiPy/FeTsP carbon paste electrode showed an irreversible response, with an oxidation peak at E_pa=0.40 V and nondefined reduction peak at E_pc=0.15 V (vs. SCE). These peaks were not observed for the nonmetallated porphyrin, indicating that they probably correspond to the Fe(III)/Fe(II) process. Studies made in solutions having different pH, (between pH 2 and 9) using the modified electrode showed that the peak potentials and the current density were not affect by pH changes, indicating that the iron porphyrin is very stable and strongly entrapped in the matrix. The modified electrode presented the property to electrocatalyze the eletrooxidation of hydrazine at 0.41 V (vs. SCE), at pH 7. The potentiality of the SiAl/SiPy/FeTsP electrode as a sensor for hydrazine was evaluated by the using the chronoamperometric technique. A linear response was obtained in the concentration range between 5×10^?5 and 6×10^?4 mol L^?1 of hydrazine.