Recent advances in linear and non‐linear Raman spectroscopy. Part III

Following the first two reviews on recent advances in linear and non‐linear Raman spectroscopy, the present review summarises papers mainly published in the Journal of Raman Spectroscopy during 2008. This again serves to give a brief overview of recent advances in this research field and to provide readers of this journal a quick introduction to the various sub‐fields of Raman spectroscopy. It also reflects the current research interests and trends in the Raman community. Copyright © 2009 John Wiley & Sons, Ltd.     

Recent advances in linear and non‐linear Raman spectroscopy. Part IX

This annual review is published to provide an overview of advances in the field of Raman spectroscopy as reflected in papers published each year in the Journal of Raman Spectroscopy (JRS) as well as in trends across related journals that have published papers in the broad field of Raman spectroscopy. The content is obtained from statistical data on article counts obtained from Thomson Reuters ISI Web of Science Core Collection by year and by subfield of Raman spectroscopy. Additional information is gleaned from presentations at the VIII International Conference on Advanced Vibrational Spectroscopy (ICAVS‐8) in Vienna, Austria in July 2015 and those featuring Raman scattering at SCIX 2015 organized by the Federation of Analytical Chemistry and Spectroscopy Societies (FACSS) in Providence, Rhode Island, USA, in September/October 2015. Coverage is also provided for topics from the conference ECONOS 2015 held in April in Leuven, Belgium. Finally, papers published in JRS in 2014 are highlighted and arranged by topics at the frontier of Raman spectroscopy. Taken from these various viewpoints, it is clear that Raman spectroscopy continues to be a rapidly expanding field that provides sensitive photonic information of matter at the molecular level in an ever‐widening arena of novel applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of melamine in liquid milk using surface‐enhanced Raman scattering spectroscopy

Melamine, a nitrogen‐rich chemical, has recently caused enormous economic losses to the food industry due to the cases of milk products adulterated by melamine. This has led to an urgent need of rapid and reliable methods for detection of melamine in food. In this study, surface‐enhanced Raman scattering (SERS) spectroscopy was used to detect melamine in liquid milk. The sample preparation with liquid milk is very easy; it has to be only diluted with double‐distilled water followed by centrifugation. By using a silver colloid, at least a 10⁵‐fold enhancement of the Raman signal was achieved for the measurement of melamine. The limit of detection by this method was 0.01 µg ml⁻¹ for melamine standard samples. Based on the intensity of the Raman vibrational bands normalised to that of the band at 928 cm⁻¹ (CH₂), an external standard method was employed for quantitative analysis. The linear regression square (R²) of the curve was 0.9998; the limit of quantitation using this approach was 0.5 µg ml⁻¹ of melamine in liquid milk; the relative standard deviation was ≤10%; and recoveries were from 93 to 109%. The test results for SERS were very precise and as good as those obtained by liquid chromatography/tandem mass spectrometry. The method was simple, fast(only needs about 3 min), cost effective, and sensitive for the detection of melamine in liquid milk samples. Therefore, it is more suitable for the field detection of melamine in liquid milk. Copyright © 2010 John Wiley & Sons, Ltd.     

Measurement and calculation of the Q‐branch spectrum of nitrogen using inverse Raman spectroscopy and cw Raman‐induced polarization spectroscopy

The techniques of inverse Raman spectroscopy, Raman‐induced polarization spectroscopy (RIPS), and optical heterodyne RIPS (OHD‐RIPS) are compared by probing the Q‐branch of the nitrogen molecule. The signal is measured employing either a photomultiplier tube (low background level–RIPS) or a photodetector (high background level–IRS and OHD‐RIPS). The measurements are performed using atmospheric mixtures of N₂ Ar with concentrations varying from 0 to 79% N₂. This strategy permits estimation of detection limits using the different techniques. Pump and probe energy levels are varied independently to study signal dependence on laser irradiance. A theoretical treatment is presented on the basis of the Raman susceptibility equations, which permits the calculation of spectra for all three techniques. Calculated Q‐branch spectra are compared with the measured spectra for the interactions of a linearly polarized probe beam with a linearly or circularly polarized pump beam. The polarizer angle in the detection path for OHD‐RIPS has a dramatic effect on the shape of the spectrum. The calculated and experimental OHD‐RIPS spectra are in good agreement over the entire range of investigated polarizer angles. Detection limits using these techniques are analyzed to suggest their applicability for measuring other species of importance in combustion and plasma systems. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Micro‐Raman spectroscopy on analcime and pollucite in comparison to X‐ray diffraction

Natural and synthetic samples of analcime and pollucite (both zeolites belonging to the analcime group) were studied by means of micro‐Raman spectrometry, X‐ray fluorescence analysis (XFA) and X‐ray diffraction (XRD). On knowing the chemical and structural characteristics of each solid‐solution member, the observed shift in the spectral position of the Raman active modes can be explained and used for phase determination. As shown, the distinction between members of the analcime–pollucite solid‐solution series using Raman spectroscopy is significantly more conclusive than the corresponding XRD findings. Also, information about the structurally bound water inside the zeolite structure can be gained using Raman spectroscopy as long as a suitable exciting wavelength is selected. Copyright © 2008 John Wiley & Sons, Ltd.     

Identification of chemical modification in single human keratinocyte cells exposed to low doses of chlorpyriphos by Raman micro‐spectroscopy

Raman micro‐spectroscopy can be used to investigate biological single cells exposed to different chemicals. Since chronic exposure at low doses of pesticides can promote several diseases, the investigation of cellular changes induced by exposure to non‐cytotoxic doses of pesticides is of increasing interest. The efficiency of Raman micro‐spectroscopy to detect chemical modification in normal human keratinocytes induced by exposure to non‐cytotoxic doses of chlorpyriphos, an organophosphate pesticide present in many plant‐protection products, was investigated. Such modification affects mainly proteineous components (both single amino acids and amide linkages between amino acids) of the nucleus, cellular membranes and cytoplasm as well as the nucleic acid component of the nucleus. Chemical modifications are already detectable after 24 h exposure of keratinocytes at a chlorpyriphos concentration of 10⁻⁶ M , which is three orders of magnitude lower than the cytotoxic concentration (10⁻³ M ). Heavy damage to the lipid component occurs after exposure to the nearly cytotoxic concentration (10⁻⁴ M ). Atomic force microscopy images of keratinocyte cells exposed for 24 h to various chlorpyriphos concentrations show a progressive deterioration of the morphology of cellular membrane as the chlorpyriphos concentration increases. The results of this work may have wide applications in the monitoring of molecular changes in single human cells exposed to toxic agents. Copyright © 2010 John Wiley & Sons, Ltd.     

Model‐based pre‐processing in Raman spectroscopy of biological samples

Model‐based pre‐processing has become wide spread in spectroscopy and is the standard procedure in Fourier‐transform infrared spectroscopy. It has also been shown to give valuable contributions in Raman spectroscopy. Extended multiplicative signal correction is flexible enough to handle varying fluorescence background and take into account individual variations in baselines while still keeping enough rigidity through reference spectra and model fitting to avoid degenerate solutions and overfitting, when used correctly. We demonstrate the basic extended multiplicative signal correction method and some extensions, including a novel shift correction, on real Raman data to demonstrate effects on visual appearance, replicate variation and prediction. Comparisons with other standard correction methods are also shown and discussed. © 2016 The Authors. Journal of Raman Spectroscopy Published by John Wiley & Sons, Ltd.     

The characteristics of laser‐driven shock wave investigated by time‐resolved Raman spectroscopy

An accurate and simple method, Raman peak‐shift simulation, is proposed to determine the characteristics of a laser‐driven shock wave. Using the principle of the Raman peaks shifting at high pressure and the pressure distribution in the gauge layer, the profile of the Raman peak can be numerically simulated. Combined with time‐resolved Raman spectroscopy, some main characteristics of the shock wave were determined. In the experiment, polycrystalline anthracene was used as the pressure gauge. The pump–probe technique was used to obtain the time‐resolved Raman spectra of anthracene under shock loading. The velocity of the shock wave, the peak pressure and the rise time of the shock front were determined by simulating the experimental spectra numerically. The result shows that the method of Raman peak‐shift simulation is effective in obtaining the characteristics of a laser‐driven shock wave. Copyright © 2010 John Wiley & Sons, Ltd.     

In‐situ Raman spectroscopy of current‐carrying graphene microbridge

In‐situ Raman spectroscopy was performed on chemical vapor deposited graphene microbridge (3 μm × 80 μm) under electrical current density up to 2.58 × 10⁸ A/cm² in ambient conditions. We found that both the G and the G′ peak of the Raman spectra do not restore back to the initial values at zero current, but to slightly higher values after switching off the current through the microbridge. The up‐shift of the G peak and the G′ peak, after switching off the electrical current, is believed to be due to p‐doping by oxygen adsorption, which is confirmed by scanning photoemission microscopy. Both C–O and C=O bond components in the C1s spectra from the microbridge were found to be significantly increased after high electrical current density was flown. The C=O bond is likely the main source of the p‐doping according to our density functional theory calculation of the electronic structure. Copyright © 2014 John Wiley & Sons, Ltd.     

UV‐resonance Raman micro‐spectroscopy to assess residual chromophores in cellulosic pulps

Ultraviolet‐resonance Raman (UV‐RR) micro‐spectroscopy is an appropriate and sensitive tool to assess the chromophore structures in bleached cellulosic pulps used for papermaking. The particular selectivity in detection and identification of chromophores in pulps is achieved by acquiring the UV‐RR spectra in the solid state with laser excitation at 325 nm. This wavelength corresponds to absorption of poly‐unsaturated chromophore structures in partially bleached/fully bleached pulps, and linearly correlated with the signal at ca 1600 cm⁻¹ in the UV‐RR spectra. The characteristic vibrations from particular pulp chromophore structures have been assigned from experiments with model compounds, thus allowing the establishment of a UV‐RR database. Among the components of bleached pulp, the xylan–lignin complex was suggested to be an important source of chromophores. The monitoring of pulp bleaching by UV‐RR allowed us to suggest that it is the formation of new polysaccharide‐derived chromophores upon bleaching that hinders development of further brightness and is co‐responsible for the brightness reversion of fully bleached pulps. Copyright © 2010 John Wiley & Sons, Ltd.     

Drop coating deposition Raman spectroscopy as a potential tool for identification and determination of fructose in seminal plasma

The detection of fructose in the seminal plasma has significant value to evaluate the function of seminal vesicles and evaluate male fertility. In this study, drop coating deposition Raman (DCDR) method was utilized to quantitative determination of fructose in seminal plasma. Optimization of experimental parameters to achieve reagent‐free and rapid detection of fructose was also investigated. Different fructose concentrations within physiological level demonstrated a linear relationship with the band intensity of 627 cm⁻¹ (assigned to fructose), and the relative error of predicted fructose concentration was 10.23%. Our results show that DCDR method has the potential for the determination of fructose concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of archeological glasses by micro‐Raman spectroscopy

The method based on the deconvolution of the Raman spectra of glasses, proposed for the investigation of glazed ceramics by Colomban, is applied to archeological samples of glass of two different origins in an attempt to characterize the glass composition and the fictive temperature using a contactless, nondestructive spectroscopic technique. The samples investigated are glassy mosaic tesserae of Roman times from Massa Lubrense, Napoli, Italy, and medieval rosary grains found during the excavations in the church of San Martino di Rivosecco, Parma, Italy. The polymerization index, obtained as the ratio of the bending and stretching band amplitudes, suggests firing temperatures not less than 1000–1100 °C for both Roman and medieval glasses. From the wavenumber shift of some stretching bands at about 1050–1100 cm⁻¹, the content of lead was estimated. The medieval samples show a lower Pb content, a result confirmed by elementary energy dispersive X‐ray spectral data. Copyright © 2010 John Wiley & Sons, Ltd.     

Ag‐nanoparticle‐modified single Ag nanowire for detection of melamine by surface‐enhanced Raman spectroscopy

Silver nanowires synthesized by a solvothermal method were used as templates for fabricating silver‐nanoparticle‐decorated silver (AgNP/Ag) nanowires. The number density and particle size of Ag nanoparticles can be controlled by varying the concentration of Ag precursor. Single AgNP/Ag nanowire exhibited strong surface‐enhanced Raman scattering effect. Detection of melamine molecules at concentrations as low as 1.0 × 10⁻⁸ M was used as an example to show the possible applications of such AgNP/Ag nanowires. Their application in rapid detection of melamine in milk solution was further demonstrated. It was shown that melamine in milk solution at a low concentration of 5.0 × 10⁻⁸ M can be easily detected with little sample pretreatment. The results demonstrate the potential of single AgNP/Ag nanowire as a surface‐enhanced Raman scattering substrate for convenient and sensitive detection of trace amounts of melamine in a complex mixture. Copyright © 2012 John Wiley & Sons, Ltd.     

Phase‐specific Raman analysis of n‐alkane melting by moving‐window two‐dimensional correlation spectroscopy

We use moving‐window two‐dimensional correlation spectroscopy (MW‐2DCOS) for phase‐specific Raman analysis of the n‐alkane (C₂₁H₄₄) during melting from the crystalline solid phase to the intermediate rotator phase and to the amorphous molten phase. In MW‐2DCOS, individual peak‐to‐peak correlation analysis within a small subset of spectra provides both temperature‐resolved and spectrally disentangled Raman assignments conducive to understanding phase‐specific molecular interactions and chain configurations. We demonstrate that autocorrelation MW‐2DCOS can determine the phase transition temperatures with a higher resolving power than commonly used analysis methods including individual peak intensity analysis or principal component analysis. Besides the enhanced temperature resolving power, we demonstrate that asynchronous 2DCOS near the orthorhombic‐to‐rotator transition temperature can spectrally resolve the two overlapping peaks embedded in the Raman CH₂ twisting band in the orthorhombic phase, which had been only predicted but not observed because of thermal broadening near the melting temperature. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.     

Raman spectroscopy of dipyrrins: nonresonant,resonant and surface‐enhanced cross‐sections and enhancement factors

Detailed studies of the mechanism of surface‐enhanced (resonance) Raman spectroscopy (SE(R)RS), and its applications, place a number of demands on the properties of SERS scatterers. With large Raman cross‐sections, versatile synthetic chemistry and complete lack of fluorescence, free dipyrrins meet these demands but the Raman and SE(R)RS spectroscopy of free dipyrrins is largely unknown. The first study of the Raman spectroscopy of free dipyrrins is therefore presented in this work. The nonresonant Raman, resonant Raman and surface‐enhanced Raman spectra of a typical meso aryl‐substituted‐dipyrrin are reported. Absolute differential cross‐sections are obtained for excitation wavelengths in the near infrared and visible region, in solution phase and for dipyrrin adsorbed on the surface of silver nanoparticles. Raman enhancement factors for SERRS and resonance Raman are calculated from the observed differential cross‐sections. The magnitudes of the resonantly enhanced cross‐sections are similar to those recently reported for strong SERS dyes such as Rhodamine 6G and Crystal Violet. Free dipyrrins offer the advantages of existing SERS dyes but without the drawback of strong fluorescence. Free dipyrrins should therefore find applications in all areas of Raman spectroscopy including fundamental studies of the mechanisms of SERS and bioanalytical and environmental applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

A shifted‐excitation Raman difference spectroscopy (SERDS) evaluation strategy for the efficient isolation of Raman spectra from extreme fluorescence interference

A biochemical characterization of pathologies in biological tissue can be provided by Raman spectroscopy. Often, the raw spectrum is severely affected by fluorescence interference. We report and compare various spectra‐processing approaches required for the purification of Raman spectra from heavily fluorescence‐interfered raw spectra according to the shifted‐excitation Raman difference spectroscopy method. These approaches cover the entire spectra‐processing chain from the raw spectra to the purified Raman spectra. In detail, we compared (1) area normalization versus z‐score normalization, (2) direct reconstruction of the difference spectra versus reconstruction of zero‐centered difference spectra and (3) collective baseline correction of the reconstructed spectra versus piecewise baseline correction of the reconstructed spectra and, finally, (4) analyzed the influence of the shift of the excitation wavelength on the quality of the reconstructed spectra. Statistical analysis of the spectra showed that – in our experiments – the best results were obtained for the z‐score normalization before subtraction of the normalized spectra, followed by zero‐centering of the difference spectra before reconstruction and a piecewise baseline correction of the pure Raman spectra. With our equipment, a wavelength shift from 784 to 785 nm provided reconstructed spectra of best quality. The analyzed specimens were different tissue types of pigs, tissue from the oral cavity of humans and a model solution of dye dissolved in ethanol. © 2015 The Authors. Journal of Raman Spectroscopy published by John Wiley & Sons Ltd.