High temperature oxidation of Cr–Mo–V tool steel in carbon dioxide

This study aims to examine the oxidation resistance and kinetics of Cr, Mo, and V containing tool steel (Calmax) when exposed in CO₂ high temperature environment by thermogravimetric measurements, X-ray diffraction analysis, and microscopic observation. The tool steel samples begin to oxidize at 480 °C while over 600 °C, the oxidation rate increases significantly. Finally, at 900 °C, the oxidation rate is significantly high. The activation energy of the oxidation was calculated as 160.1 kJ mol^?1. Microscopically, the thickness of the scale was found to increase with the exposure temperature, and the as formed scales consisted of two distinguishable oxide layers.     

Electrochemical oxidation of aniline in a silica sol–gel matrix

Electrochemical oxidation of aniline encapsulated in a silica solid electrolyte prepared by a sol–gel process yielded products that were dependent on the pore size. An acid-catalyzed process that used tetramethyl orthosilicate as the precursor and aniline as a dopant yielded the silica. When the aging time was limited to one day so that a mesoporous solid was obtained, the potentiodynamic oxidation of aniline at a carbon fiber electrode resulted in the formation of polyaniline. With aging times of 3–5 days, microporous silica was obtained. In this electrolyte, the formation of dimers and other oligomers was observed by cyclic voltammetry. Evidence for these products was the presence of a quasi-reversible redox couple at 0.2 V vs Ag/AgCl that was previously related to oligomeric aniline by Raman spectroscopy. The results supported the hypothesis that the pore structure of sol–gel electrolytes can influence the pathways of electrode reactions therein.     

Enhanced wear resistance of sol–gel TiO2 film on a carbon steel in unlubricated sliding against steel ball by stearic acid modification

Increasing wear resistance of steel is of great importance for their practical application. In this paper, we have studied the tribological performance of assembly of stearic acid on a carbon steel coated by sol–gel derived TiO₂ film. The samples were characterized by means of infrared spectroscopy, contact angle measurements, atomic force microscopy and a macro friction and wear tester. Enhanced wear resistance were clearly obtained after functionalization of stearic acid on the TiO₂ surface.     

Electrochemical deposition of platinum nanoparticles in multiwalled carbon nanotube–Nafion composite for methanol electrooxidation

Platinum nanoparticles were successfully deposited within a multiwalled carbon nanotube (MWCNT)–Nafion matrix by a cyclic voltammetry method. A Pt(IV) complex was reduced to platinum nanoparticles on the surface of MWCNTs. The resulting Pt nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Pt–MWCNT–Nafion nanocomposite film-modified glassy carbon electrode had a sharp hydrogen desorption peak at about −0.2 V vs. Ag/AgCl (3 M) in a solution of 0.5 M H₂SO₄, which is directly related to the electrochemical activity of the Pt nanoparticles presented on the surface of MWCNTs. The electrocatalytic properties of the Pt–MWCNT–Nafion nanocomposite-modified glassy carbon electrode for methanol electrooxidation were investigated by cyclic voltammetry in a 2 M CH₃OH + 1 M H₂SO₄ solution. In comparison with the Pt-coated glassy carbon electrode and the Pt–Nafion modified glassy carbon electrode, the Pt–MWCNT–Nafion-modified electrode had excellent electrocatalytic activity toward methanol electrooxidation. The stability of the Pt–MWCNT–Nafion nanocomposite-modified electrode had also been evaluated.     

Electrochemical formation of a cesium–tin alloy in an amide-type ionic liquid

Electrochemical formation of cesium–tin alloys in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPTFSA) containing 0.5 M CsTFSA has been studied. Cathodic decomposition of BMPTFSA on a platinum electrode was suppressed by addition of CsTFSA, suggesting that Cs⁺ accumulated on the electrode surface and hindered the reduction of BMPTFSA. Multiple cathodic current peaks were observed on a tin electrode in the ionic liquid. Energy-dispersive X-ray analysis and X-ray diffraction results suggested formation of cesium–tin alloys after potentiostatic cathodic reduction on the tin electrode at room temperature.     

Electrochemical oxidation behavior of guanosine-5��-monophosphate on a glassy carbon electrode modified with a composite film of graphene and multi-walled carbon nanotubes, and its amperometric determination

The electrochemical oxidation of guanosine-5??-monophosphate (GMP) was studied with a glassy carbon electrode modified with a composite made from graphene and multi-walled carbon nanotubes. GMP undergoes an irreversible oxidation process at an oxidation peak potential of 987?mV in phosphate buffer solution. Compared to other electrodes, the oxidation peak current of GMP with this electrode was significantly increased, and the corresponding oxidation peak potential negatively shifted, thereby indicating that the modified material exhibited electrochemical catalytic activity towards GMP. Chronocoulometry demonstrates that the material also effectively increases the surface area of the electrode and increases the amount of GMP adsorbed. Under the optimum conditions, the oxidation current is proportional to the GMP concentration in the range from 0.1 to 59.7???M with a correlation coefficient of 0.9991. The detection limit is 0.025???M (at S/N?=?3).

Recent advances in the application of nanoparticles in the selective reduction of carbon–carbon double bonds

Herein, we present recent advances in the application of metal nanoparticles in the selective hydrogenation of C–C double bonds. The review focuses on reduction methods of alkenes, arenes, and aromatic heterocycles, which were classified according to transition metals used as catalysts. The majority of described systems concern direct hydrogenation, which is of particular importance to industrial processes. Nonetheless, interesting transfer hydrogenation protocols were also developed, which may be incredibly convenient for laboratory purposes. Some of the methods are distinguished with excellent chemoselectivity making them the perfect tool for the synthesis of compounds containing reducible functional groups. Apart from noble metals, the application of earth-abundant ones as catalysts was a subject of studies, and the related methods were highlighted.     

Electrochemical determination of acetaminophen at a carbon electrode modified in the presence of β-cyclodextrin: role of the activated glassy carbon and the electropolymerised β-cyclodextrin

Acetaminophen is a well-known drug commonly used to provide pain relief, but it can also lead to acute liver failure at high concentrations. Therefore, there is considerable interest in monitoring its concentrations. Sensitive and selective acetaminophen electrochemical sensors were designed by cycling a glassy carbon electrode (GCE) to high potentials in the presence of β-CD in a phosphate electrolyte, or by simply activating the GCE electrode in the phosphate solution. Using cyclic voltammetry, adsorption-like voltammograms were recorded. The acetaminophen oxidation product, N-acetyl benzoquinone imine, was protected from hydrolysis, and this was attributed to the adsorption of acetaminophen at the modified GCE. The rate constants for the oxidation of acetaminophen were estimated as 4.3 × 10^–3 cm² s^–1 and 3.4 × 10^–3 cm² s^–1 for the β-CD-modified and -activated electrodes, respectively. Using differential pulse voltammetry, the limit of detection was calculated as 9.7 × 10^–8 M with a linear concentration range extending from 0.1 to 80 μM. Furthermore, good selectivity was achieved in the presence of caffeine, ascorbic acid and aspirin, enabling the determination of acetaminophen in a commercial tablet. Similar electrochemical data were obtained for both the β-CD-modified and activated GCE surfaces, suggesting that the enhanced detection of acetaminophen is connected mainly to the activation and oxidation of the GCE. Using SEM, EDX and FTIR, no evidence was obtained to indicate that the β-CD was electropolymerised at the GCE.

     

Electrochemical detection of DNA methylation using a glassy carbon electrode modified with a composite made from carbon nanotubes and β-cyclodextrin

We describe a method for detecting DNA methylation. It is based on direct oxidation of DNA bases at a glassy carbon electrode (GCE) modified with film of a multiwalled carbon nanotube-β-cyclodextrin composite. This nano-structured film causes a strong enhancement on the oxidation current of DNA bases due to its large effective surface area and extraordinary electronic properties. Well-defined peaks were obtained as a result of electro-oxidation of guanine (at 0.67 V), adenine (at 0.92 V), thymine (at 1.11 V), cytosine (at 1.26 V), and 5-methylcytosine (at 1.13 V; all data vs. saturated calomel electrode (SCE)). The potential difference between 5-methylcytosine and cytosine (130 mV) is large enough to enable reliable simultaneous determination and analysis. The interference by thymine can be eliminated by following the principle of complementary pairing between purine and pyrimidine bases in DNA. The modified electrode was successfully applied to the evaluation of 5-methylcytosine in a fish sperm DNA, the methylation level of cytosine was found to be 7.47 %, and the analysis process took less than 1 h.     

Dispersion of single-walled carbon nanotubes in dimethylacetamide and a dimethylacetamide–cholic acid mixture

A way of dispersing single-walled carbon nanotubes in preparing stable suspensions with high concentrations of individual nanotubes in amide solvents is described. The obtained suspensions are studied via Raman spectroscopy. The dependence of the degree of single-walled carbon nanotube (SWNT) dispersion in individual and mixed amide solvents on the type of solvent, the mass of nanotubes, and the concentration of cholic acid is established. A technique for processing spectral data to estimate the diameters and chiralities of individual nanotubes in suspension is described in detail.     

Synthesis of a novel gelatin–carbon nanotubes hybrid hydrogel

This letter focuses on the first result the preparation and its swelling behavior of a novel hybrid gelatin hydrogel with carbon nanotubes. A novel hybrid gelatin hydrogel with carbon nanotubes was synthesized by physical mixing method. The structure of the novel hydorgel obtained was characterized by SEM. Besides, the swelling behavior of the hydrogel synthesized was measured at different temperature. The results indicated that carbon nanotubes added could maintain the stability of the hybrid hydrogel at 37 °C. This suggests that the hybrid gelatin hydrogel with carbon nanotubes could be used in biomedical field. Besides, its application in protein concentrating has been discussed.     

Electrochemical sensor based on a carbon nanotube-modified imprinted sol–gel for selective and sensitive determination of ß2-agonists

We describe a molecularly imprinted electrochemical sensor for selective and sensitive determination of β₂-agonists. It is making use of a combination of single-wall carbon nanotubes (SWNTs) with a molecularly imprinted sol–gel. The SWNTs were introduced in order to enhance electron transport and sensitivity. The imprinted sol–gel film with its specific binding sites acts as a selective recognition element and as a preconcentrator for β₂-agonists. The morphology of the imprinted film was characterized by scanning electron microscopy. The optimized sensor displays high sensitivity and excellent selectivity for the β₂-agonists as shown for their determination in human serum samples.

Electrochemical performance of Co–Al layered double hydroxide nanosheets mixed with multiwall carbon nanotubes

Regular hexagonal Co–Al layered double hydroxides (Co–Al LDH) were synthesized by urea-induced homogeneous precipitation. This material proved to be nanosheets by scanning electron microscopy and X-ray diffraction measurements. The electrochemical capacitive behavior of the nanosheets in 1 M KOH solution were evaluated by constant current charge/discharge and cyclic voltammetric measurements, showing a large specific capacitance of 192 F·g⁻¹ even at the high current density of 2 A·g⁻¹. When multiwall carbon nanotubes (MWNTs) were mixed with the Co–Al LDH, it was found that the specific capacitance and long-life performance of all composite electrodes at high current density are superior to pure LDH electrode. When the added MWNTs content is 10 wt%, the specific capacitance increases to 342.4 F·g⁻¹ and remains at a value of 304 F·g⁻¹ until the 400th cycle at 2 A·g⁻¹, showing that this is a promising electrode material for supercapacitors working at heavy load. According to the electrochemical impedance spectra, MWNTs greatly increase the electronic conductivity between MWNTs and the surface of Co–Al LDH, which consequently facilitates the access of ions in the electrolyte and electrons to the electrode/electrolyte interface.     

Electrochemical reduction of UO2 to U in a LiCl–KCl-Li2O molten salt

An electrochemical reduction of UO₂ to U in a LiCl–KCl-Li₂O molten salt has been investigated in this study. A diagram showing equilibrium potentials (relative to Cl₂/Cl^?) plotted versus the negative logarithms of oxide-ion activity (pO^2?) was constructed. The crushed UO₂ pellets in the cathode basket of an electrolytic reducer were successfully reduced to U. The reduction of UO₂ is proved to proceed mainly through chemical reaction with in situ generated Li and K at the cathode. The control of cathode potential is essential to prevent the deposition and subsequent vaporization of K metal at the cathode for the applications of a LiCl–KCl-Li₂O molten salt as an electrolyte for the metal production from its oxide sources.     

Electrochemical metal-ion sensor based on a cobalt phthalocyanine complex captured in Nafion® on a glassy carbon electrode

This article describes an electrochemical metal-ion sensor based on a cobalt phthalocyanine (CoPc) complex and determination of its sensor activity for some transition metal ions. Ag⁺ and Hg²⁺, among several transition metal ions, coordinate to the sulfur donors of CoPc and alter the electrochemical responses of CoPc in solution, indicating possible application of the complex as Ag⁺ and Hg²⁺ sensor. For practical application, CoPc was encapsulated into a polymeric cation exchange membrane, Nafion, on a glassy carbon electrode and used as an electrochemical coordination element. This composite electrode was potentiometrically optimized and potentiometrically and amperometrically characterized as transition metal-ion sensors with respect to reproducibility, repeatability, stability, selectivity, linear concentration range, and sensitivity. A µmol?dm^?3 sensitivity of the CoPc-based sensor indicates its possible practical application for the determination of Ag⁺ and Hg⁺² in waste water samples.     

Electrochemical separation of uranium and cerium in molten LiCl–KCl

The electrochemical separation of uranium from cerium in LiCl–KCl eutectic and the electrochemical behavior of Ce(III) were studied. According to the cyclic voltammogram of Ce(III) and the former result of U(III), electrodeposition potential was determined at ?1.65 V (vs Ag/AgCl). The uranium metal was successfully deposited and separated from cerium. The morphology of deposit and cross section of electrode were investigated by SEM, firstly uranium deposit alloys with stainless steel and forms a thin transition layer, and secondly the uranium metal layer grows from the transition layer. The separation factors of uranium/cerium on different recovery ratios were determined through a series of steps. It was found that the content of cerium in the deposit and separation factors declined with increasing the initial concentration of U³⁺ in molten salts; the separation factors remained stable at around 20 in different uranium recovery ratios.     

Electrochemical Characterization of CoHP–Si Incorporated into a Carbon Paste Electrode

Reduction of dioxygen at a carbon paste electrode (CPE) modified with cobalt hematoporphyrin complex immobilized on silica gel (CoHP–Si) was studied by cyclic voltammetry and rotating disk electrode. In 0.5molL^–1 KCl solution, the supported complex showed significant catalytic activity towards four-electron reduction of O₂ to H₂O at a relatively high pH (5.4). The reduction of dioxygen proceeds at a more negative potential (–0.375V) than the redox reaction Co^III/Co^II (0.464V), indicating that the mechanism does not involve the complex as an electron transfer mediator. Catalytic activity of CoHP–Si towards reduction of H₂O₂ was tested, but no activity was observed.Received October 26, 2002; accepted March 10, 2003 Published online July 16, 2003     

Electrochemical performance of Mg–9Al–1Zn alloy in aqueous medium

A systematic study on the corrosion and passivation behavior of AZ91D alloy in relation to the influence of concentration, temperature, pH, and immersion time was made in aqueous sulfate solution using electrochemical techniques including open-circuit potential, potentiodynamic polarization and impedance spectroscopy. It was found that the corrosion and pitting potentials (E _corr and E _pit) of the alloy drift to more active values with increasing either concentration (0.01–1.0 M) or temperature (278–338 K) of the test solution, suggesting that sulfate solution enhances the alloy dissolution, particularly at higher temperatures. On the other hand, values of the total film resistance (R _T) indicate that neutral solution (pH 7.0) supports the formation of a better protective layer on AZ91D surface than alkaline (pH 12.5) or acidic (pH 1.0) medium. The growth of a protective film on the alloy surface at short immersion times (up to ∼50 h) is evinced by a rapid positive evolution of E _corr and fast decrease in the corrosion rate (i _corr). However, for a long-term exposure (up to 500 h) E _corr drifts negatively and i _corr increases due to breakdown of the protective film, which causes a decrease in the alloy stability. Fitting the impedance data to equivalent circuit models suitable to each behavior assisted to explore the mechanism for the attack of the sample surface at various testing times. The results obtained from the three studied electrochemical techniques are in good agreement.