In situ Raman monitoring of materials under irradiation: study of uranium dioxide alteration by water radiolysis

In situ Raman scattering studies allow following real‐time evolutions of volume or surface structures under extreme conditions. In nuclear materials sciences, ion irradiation‐induced atomic organization modification and water radiolysis are of a major interest. In order to better understand these phenomena, we have developed an in situ versatile portable Raman spectroscopy system coupled with a cyclotron accelerator, allowing monitoring of a solid/liquid interface under irradiation and thus giving access to effects of radiolysis. The different parts of the system and their improvements are described in details. The system efficiency is highlighted by a comparative study of the time dependence of UO₂ surface modification induced, on one hand by contact with water under irradiation by 5 MeV He²⁺ particles, and on the other hand by pure chemical alteration, through contact with a hydrogen peroxide solution. Copyright © 2012 John Wiley & Sons, Ltd.     

New evidences of in situ laser irradiation effects on γ‐Fe2O3 nanoparticles: a Raman spectroscopic study

The nature of the physical mechanisms responsible for the structural modification of the γ‐Fe₂O₃ nanoparticles under laser irradiation has been investigated by Raman spectroscopy. In situ micro‐Raman measurements were carried out on as‐prepared γ‐Fe₂O₃ nanoparticles about 4 nm in size as a function of laser power and on annealed γ‐Fe₂O₃ particles. A baseline profile analysis clearly evidenced that the phase transition from maghemite into hematite is caused by local heating due to laser irradiation with an increase of grain size of nanoparticles. This increasing was clearly determined by X‐ray diffraction from 4 nm in nanoparticles up to more than 177 nm beyond 900 °C in a polycrystalline state. Copyright © 2010 John Wiley & Sons, Ltd.     

A high‐temperature furnace for in situ synchrotron X‐ray spectroscopy under controlled atmospheric conditions

A high‐temperature furnace with an induction heater coil has been designed and constructed for in situ X‐ray spectroscopic experiments under controlled atmospheric conditions and temperatures up to 3275 K. The multi‐purpose chamber design allows working in backscattering and normal fluorescence mode for synchrotron X‐ray absorption and emission spectroscopy. The use of the furnace is demonstrated in a study of the in situ formation of Cr oxide between 1823 K and 2023 K at logPO₂ values between ?10.0 and ?11.3 using X‐ray absorption near‐edge spectroscopy. The set‐up is of particular interest for studying liquid metals, alloys and other electrically conductive materials under extreme conditions.     

Ultrathin ZrO2 films on Si-rich SiC(0 0 0 1)-(3 × 3): Growth and thermal stability

The growth and thermal stability of ultrathin ZrO₂ films on the Si-rich SiC(0 0 0 1)-(3 × 3) surface have been explored using photoelectron spectroscopy (PES) and X-ray absorption spectroscopy (XAS). The films were grown in situ by chemical vapor deposition using the zirconium tetra tert-butoxide (ZTB) precursor. The O 1s XAS results show that growth at 400 °C yields tetragonal ZrO₂. An interface is formed between the ZrO₂ film and the SiC substrate. The interface contains Si in several chemically different states. This gives evidence for an interface that is much more complex than that formed upon oxidation with O₂. Si in a 4+ oxidation state is detected in the near surface region. This shows that intermixing of SiO₂ and ZrO₂ occurs, possibly under the formation of silicate. The alignment of the ZrO₂ and SiC band edges is discussed based on core level and valence PES spectra. Subsequent annealing of a deposited film was performed in order to study the thermal stability of the system. Annealing to 800 °C does not lead to decomposition of the tetragonal ZrO₂ (t-ZrO₂) but changes are observed within the interface region. After annealing to 1000 °C a laterally heterogeneous layer has formed. The decomposition of the film leads to regions with t-ZrO₂ remnants, metallic Zr silicide and Si aggregates.     

Temperature‐depending Raman line‐shift of silicon carbide

Silicon carbide (SiC) is often used for electronic devices operating at elevated temperatures. Spectroscopic temperature measurements are of high interest for device monitoring because confocal Raman microscopy provides a very high spatial resolution. To this end, calibration data are needed that relate Raman line‐shift and temperature. The shift of the phonon wavenumbers of single crystal SiC was investigated by Raman spectroscopy in the temperature range from 3 to 112°C. Spectra were obtained in undoped 6H SiC as well as in undoped and nitrogen‐doped 4H SiC. All spectra were acquired with the incident laser beam oriented parallel as well as perpendicular to the c‐axis to account for the anisotropy of the phonon dispersion. Nearly all individual peak centers were shifting linearly towards smaller wavenumbers with increasing temperature. Only the peak of the longitudinal optical phonon A₁(LO) in nitrogen‐doped 4H SiC was shifting to larger wavenumbers. For all phonons, a linear dependence of the Raman peaks on both parameters, temperature and phonon frequency, was found in the given temperature range. The linearity of the temperature shift allows for precise spectroscopic temperature measurements. Temperature correction of Raman line‐shifts also provides the ability to separate thermal shifts from mechanically induced ones. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ monitoring of solid‐state transition of p‐aminobenzoic acid polymorphs using Raman spectroscopy

The purpose of this study is to investigate the mechanism of solid‐state polymorphic transition of p‐aminobenzoic acid (PABA) using in situ Raman spectroscopy measurement. The polymorphic transition experiments were conducted on a micro quartz vessel mounted on a microscope, hot and cold stage, under isothermal conditions. The temperature was precisely controlled by a standalone temperature controller equipped with liquid nitrogen cooling system. The Raman spectroscopy probe was positioned on the surface of the solid sample in the micro vessel. The polymorphic transition progression was in situ monitored and recorded by Raman spectroscopy. Based on the polymorphic transition rate resulted from the quantitative analysis of Raman spectra, the mechanism of solid‐state polymorphic transition of PABA was examined by various empirical kinetic models. An Arrhenius analysis was also performed to calculate activation energies from 134.7 kJ mol⁻¹ to 137.7 kJ mol⁻¹ for the transition. The results demonstrated that in situ Raman spectroscopy is a valuable and accurate technique to probe polymorphic transition process. Copyright © 2009 John Wiley & Sons, Ltd.     

Nanocarbon hybrids of graphene‐based materials and ultradispersed diamond: investigating structure and hierarchical defects evolution with electron‐beam irradiation

We report the influence of electron‐beam (E‐beam) irradiation on the structural and physical properties modification of monolayer graphene (Gr), reduced graphene oxide (rGO) and graphene oxide (GO) with ultradispersed diamond (UDD) forming novel hybrid composite ensembles. The films were subjected to a constant energy of 200 keV (40 nA over 100 nm region or electron flux of 3.9 × 10¹⁹ cm⁻²s⁻¹) from a transmission electron microscope gun for 0 (pristine) to 20 min with an interval of 2.5 min continuously – such conditions resemble increased temperature and/or pressure regime, enabling a degree of structural fluidity. To assess the modifications induced by E‐beam, the films were analyzed prior to and post‐irradiation. We focus on the characterization of hierarchical defects evolution using in situ transmission electron microscopy combined with selected area electron diffraction, Raman spectroscopy (RS) and Raman mapping techniques. The experiments showed that the E‐beam irradiation generates microscopic defects (most likely, interstitials and vacancies) in a hierarchical manner much below the amorphization threshold and hybrids stabilized with UDD becomes radiation resilient, elucidated through the intensity, bandwidth, and position variation in prominent RS signatures and mapping, revealing the defects density distribution. The graphene sheet edges start bending, shrinking, and generating gaps (holes) at ~10–12.5 min owing to E‐beam surface sputtering and primary knock‐on damage mechanisms that suffer catastrophic destruction at ~20 min. The microscopic point defects are stabilized by UDD for hybrids in the order of GO > rGO ≥ Gr besides geometric influence, i.e. the int erplay of curvature‐induced (planar vs curved) energy dispersion/absorption effects. Furthermore, an attempt was made to identify the nature of defects (charged vs residual) through inter‐defect distance (i.e. L_D). The trends of L_D for graphene‐based hybrids with E‐beam irradiation implies charged defects described in terms of dangling bonds in contrast to passivated residual or neutral defects. More importantly, they provided a contrasting comparison among variants of graphene and their hybrids with UDD. Copyright © 2015 John Wiley & Sons, Ltd.     

In vivo study on the protection of indole‐3‐carbinol (I3C) against the mouse acute alcoholic liver injury by micro‐Raman spectroscopy

Micro‐Raman spectroscopy (MRS) was utilized for the first time to evaluate the effect of indole‐3‐carbinol (I3C) on acute alcoholic liver injury in vivo. In situ Raman analysis of tissue sections provided distinct spectra that can be used to distinguish alcoholic liver injury as well as ethanol‐induced liver fibrosis from the normal state. Sixteen mice with liver diseases including acute liver injury and chronic liver fibrosis, and eight mice with normal liver tissues, and eight remedial mice were studied employing the Raman spectroscopic technique in conjunction with biomedical assays. The biochemical changes in mouse liver tissue when liver injury/fibrosis occurs such as the loss of reduced glutathione (GSH), and the increase of collagen (α‐helix protein) were observed by MRS. The intensity ratio of two Raman peaks (I₁₄₅₀/I₆₆₆) and in combination with statistical analysis of the entire Raman spectrum was found capable of classifying liver tissues with different pathological features. Raman spectroscopy therefore is an important candidate for a nondestructive in vivo screening of the effect of drug treatment on liver disease, which potentially decreases the time‐consuming clinical trials. Copyright © 2008 John Wiley & Sons, Ltd.     

SiC film growth on Si(111) by supersonic beams of C 60

The development of electronic devices based on Silicon Carbide (SiC) has been strongly limited by the difficulties in growing high quality crystalline bulk materials and films. We have recently elaborated a new technique for the synthesis of SiC on clean Si substrates by means of supersonic beams of C₆₀: the electronic and structural properties of the film can be controlled by monitoring the beam parameters, i.e. flux and particles energy and aggregation state. SiC films were grown in Ultra High Vacuum on Si(111)-7×7, at substrates temperatures of 800 ^° C, using two different supersonic beams of C₆₀: He and H₂ have been used as seeding gases, leading to particles energy of 5 eV and 20 eV, respectively. Surface characterisation was done in situ by Auger and X-Ray photoelectron spectroscopy, as well as by low energy electron diffraction and ex situ by atomic force microscopy technique. SiC films exhibited good structural and electronic properties, with presence of defects different from the typical triangular voids. Received 20 November 2001     

The determination of percentage dissociation of zircon (ZrSiO4) to plasma‐dissociated zircon (ZrO2.SiO2) by Raman spectroscopy

Raman spectroscopy and multivariate calibration techniques are used to determine the percentage conversion of zircon (ZrSiO₄) to plasma‐dissociated zircon, ZrO₂^.SiO₂ (PDZ). The integrated area of a consistent ZrO₂ (monoclinic) Raman band at 477 cm^–1 assigned to the A_g symmetry type from different conversion percentages of the PDZ spectra is used in a multivariate analysis scheme (partial least squares) to develop a predictive model for the subsequent determination of percentage dissociation of zircon to PDZ. In contrast to wet chemical methods, this approach eliminates the use of corrosive acids, e.g. hydrofluoric acid, thus leading to significant reductions in analysis time and material wastage, and it is a quick method that can be used online in a PDZ production facility. These results show best correlation with determination coefficient (R²) values in the range between 99.45 and 99.99% for zircon percentage dissociation in cross‐validation tests. This illustrates not only the versatility of the Raman technique in industrial applications but also the importance of noninvasive testing in the study of zircon and related materials. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of EUV periodic multilayers

Nanometric Co/Mg, Co/Mg/B₄C, Al/SiC and Al/Mo/SiC periodic multilayers deposited by magnetron sputtering are studied in order to correlate their optical performances in the extreme ultraviolet (EUV) range to their structural quality. To that purpose, our recently developed methodology based on high‐resolution X‐ray emission spectroscopy (XES) and X‐ray and EUV reflectometry is now extended to nuclear magnetic resonance (NMR) spectroscopy and time‐of‐flight secondary ions mass spectrometry (ToF‐SIMS). The analysis of the Co Lαβ and Mg Kβ emission spectra shows that the Co and Mg atoms within the multilayers are in a chemical state equivalent to that of the atoms in the pure Co and Mg references, respectively. But NMR spectra give evidence for a reaction between Co atoms and B and/or C atoms from B₄C. The Al and Si Kβ emission spectra do not reveal the formation of an interfacial compound in Al/SiC and Al/Mo/SiC. Only the roughness limits the optical quality of Al/SiC. The comparative analysis of the ToF‐SIMS spectra of Al/SiC and Al/Mo/SiC indicates that the structural quality is enhanced when Mo is introduced within the stack. Copyright © 2011 John Wiley & Sons, Ltd.     

Drop‐coating deposition Raman spectroscopy of liposomes

Drop‐coating deposition Raman (DCDR) spectroscopy was tested as a potential technique for studying liposomes at very low sample concentrations. We used model liposomes prepared either from 1,2‐distearoyl‐sn‐glycero‐3‐phospocholine or from soybean asolectin, which is composed of various lipids and thus represents a good model of natural membranes. In both cases, deposited samples formed a dried drop with a circular shape with a ring of concentrated liposomes at the edge. Spectral mapping showed that maximum Raman intensity originated from the inner part of the edge ring, while Raman signal gradually decreased in both radial directions. The Raman spectra exhibited excellent reproducibility of spectral characteristics at different locations in the drop, indicating similar conformation and ordering of hydrocarbon lipid chains in the sample. Our results suggest that DCDR spectroscopy can be used for studying lipids in situ, and sensitivity of this technique is at least two orders of magnitude higher than that of conventional Raman microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Monoclinic-tetragonal phase transition in zirconium and hafnium dioxides: A high-temperature raman scattering investigation

Zirconium dioxide ZrO₂ and hafnium dioxide HfO₂ are investigated using high-temperature Raman spectroscopy in the temperature range 300–2080 K, including the regions of the monoclinic-tetragonal phase transitions revealed in these materials. An analysis is made of the specific features observed in the evolution of the high-temperature Raman spectra of both the monoclinic (m) and tetragonal (t) modifications of ZrO₂ and HfO₂ with variations in the temperature. The polarized Raman spectra of the metastable tetragonal phases in solid solutions based on zirconia and hafnia are used to identify the symmetry of vibrations in the spectra of the tetragonal modifications of pure zirconium and hafnium dioxides, which exist at high temperatures.     

High temperature Raman study of UO2: A possible tool for in situ estimation of irradiation‐induced heating

Recently, in situ Raman setups under irradiation become available, and uranium dioxide is one of the most studied compounds. This paper reports the temperature dependence of the only Raman‐active mode in fluorine UO₂. Besides the interest in terms of phonon anharmonicity knowledge, this can be used to estimate the heating induced by irradiation: The frequency shift and width of the T_2g peak can be used as an internal indirect probe of the local temperature in the 20–590 °C range. Copyright © 2015 John Wiley & Sons, Ltd.     

Disorder‐induced symmetry lowering in Ba(Y1/2Nb1/2)O3 ceramics probed by Raman spectroscopy

This work investigates the evolution of the crystal structure of microwave‐hydrothermal synthesized Ba(Y_1/2Nb_1/2)O₃ powders as a function of firing temperature by Raman spectroscopy. The samples were produced at 200 °C and fired at temperatures ranging from 600 to 1600 °C. Raman spectra were obtained at room temperature for all samples and the results showed that materials fired at 1600 °C exhibited tetragonal (I4/m or ) structure, whereas those fired at lower temperatures exhibited the triclinic (P1 or C_i¹) structure. The results were compared with those observed for ceramics obtained by conventional solid‐state methods. It is believed that the lowering of the symmetry verified in materials fired below 1600 °C is a consequence of the local disorder of Y⁺³ and Nb⁺⁵ ions in octahedral sites. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of uranium tetrafluoride (UF4) with Raman spectroscopy

The Raman spectrum of uranium tetrafluoride (UF₄) is unambiguously characterized with multiple Raman excitation laser sources for the first time. Across different laser excitation wavelengths, UF₄ demonstrates 16 distinct Raman bands within the 50–400 cm⁻¹ region. The observed Raman bands are representative of various F–F vibrational modes. UF₄ also shows intense fluorescent bands in the 325–750 nm spectral region. Comparison of the UF₄ spectrum with the ZrF₄ spectrum, its crystalline analog, demonstrates a similar Raman band structure consistent with group theory predictions for expected Raman bands. Additionally, a demonstration of combined scanning electron microscopy and in situ Raman spectroscopy microanalytical measurements of UF₄ particulates shows that despite the inherent weak intensity of Raman bands, identification and characterization are possible for micron‐sized particulates with modern instrumentation. The published well‐characterized UF₄ spectrum is extremely relevant to nuclear materials and nuclear safeguard applications. Published 2016. This article is a U.S. Government work and is in the public domain in the USA. Journal of Raman Spectroscopy published by John Wiley & Sons Ltd.     

Phase transformations in CaCO3/iron oxide composite induced by thermal treatment and laser irradiation

Calcium carbonate (CaCO₃)/iron oxide composites were synthesized through a simple one‐step impregnation procedure by mixing iron oxide nanoparticles (γ‐Fe₂O₃ and Fe₃O₄) of about 6 nm in size and CaCO₃ microparticles (Φ = 2 µm–8 µm, vaterite phase). The morphology and structural properties of CaCO₃, iron oxide nanoparticles and CaCO₃/iron oxide composites were characterized as a function of low iron content (0 %w to 3.2 %w) by scanning electron microscopy and transmission electron microscopy, X‐ray diffraction and ⁵⁷Fe Mössbauer spectrometry. The phase transformations induced by thermal treatment and laser irradiation were investigated in situ by X‐ray thermodiffraction (XRTD) and Raman spectroscopy. We have shown that the phase transformations observed by XRTD are also observed under laser irradiation as a consequence of the absorption of the laser irradiation by iron oxide nanoparticles. Copyright © 2012 John Wiley & Sons, Ltd.     

Discrimination of carotenoid and flavonoid content in petals of pansy cultivars (Viola x wittrockiana) by FT‐Raman spectroscopy

Fourier Transform Raman spectroscopy (FT‐Raman) has been applied for the non‐destructive in‐situ analysis of pigments on differently colored flower petals of pansy cultivars (Viola x wittrockiana). The main target of the present study was to investigate how far the Raman mapping technique through FT‐Raman spectroscopy and cluster analysis of the Raman spectra is a potential method for the direct, in‐situ discrimination of flavonoids (flavonols against anthocyanins) and of carotenoids occurring in flowers, using intact and differently colored flower petal of Viola x wittrockiana for this case study. In order to get more information about the reliability of the direct in‐situ flavonoid detection by the Raman method, pigments extracts of the petals were separated by thin‐layer chromatography (TLC) and investigated by Raman spectroscopy. Hierarchical cluster analysis (HCA) of the Raman spectra from reference pigments (carotenoids, anthocyanins and flavonols), from areas of the flower petals, and from the TLC extracts allowed discriminating the various pigments, in particular flavonoids (flavonols against anthocyanins) and carotenoids. With a two‐dimensional Raman mapping technique, which provides a chemical image of the sample under investigation, we determined by cluster analysis the distribution of carotenoids, anthocyanins and flavonols from the outer layer of the petals, and by integrating through suitable spectral regions selected as characteristic markers for particular pigments their relative concentration could approximately be determined. We found a satisfactory correlation between the patterns seen on the visible images and the patterns on the chemical images obtained by Raman mapping. Copyright © 2011 John Wiley & Sons, Ltd.     

Controlled SnO2 nanocrystal growth in SiO2–SnO2 glass‐ceramic monoliths

Crack‐free (100–x) SiO₂–x SnO₂ glass‐ceramic monoliths have been prepared by the sol–gel method obtaining for the first time SnO₂ concentrations of 20% with annealing at 1100 °C. Heat‐treatment resulted in the formation and growth of SnO₂ nanocrystals within the silica matrices. Combined use of Fourier transform–Raman spectroscopy and in situ high‐temperature X‐Ray diffraction shows that SnO₂ particles begin to crystallize in the cassiterite‐type phase at 80 °C and that their average apparent size remains around 7 nm, even after annealing at 1100 °C. Nanocrystal sizes and size distributions determined by low‐wavenumber Raman are in good agreement with those obtained from transmission electron microscopy measurements. Results indicate that the formation and the growth of SnO₂ nanocrystals impose a residual porosity in the silica matrix. Copyright © 2011 John Wiley & Sons, Ltd.