One‐pot synthesis of pyrido[2,3‐d]pyrimidines via efficient three‐component reaction in aqueous media

A short and facile synthesis of pyrido[2,3‐d]pyrimidine derivatives was accomplished in good yields via the three‐component reaction of aldehydes, alkyl nitriles and aminopyrimidines in water in the presence of triethylbenzylammonium chloride (TEBAC). The structures of these compounds were characterized by elemental analysis, IR and ¹H NMR spectra and further confirmed by single crystal X‐ray diffraction analysis.     

Microwave solvent free regioselective 1,3 dipolar cycloaddition in the synthesis of 1,4 substituted [1,2,3]‐triazoles as amide bond isosteres

1,3 Dipolar cycloaddition of Fmoc‐amino azides and acetylenic amides produces under solvent free irradiation a mixture of 1,4 or 1,5 substituted [1,2,3]‐triazoles. The presence of copper (I) iodide, plays a central role on regioselectivity. Four Fmoc‐amino azides characterized by different steric hindrance in side chains, and three different terminal alkynes, provided only the 1,4 substituted regioisomer under thermal microwave heating. Good yields, low consumption of organic solvents and short reaction times are the main aspects of our procedure. Reactions are compared to regioselective copper (I) catalysed solution synthesis performed at room temperature.     

Regioselective synthesis of a new [1,2,3]‐triazoles directly from imidates

A one pot synthetic approach to the novel [1,2,3]‐triazoles system, by 1,3‐dipolar cycloaddition of 2‐diazopropane to the imidates 2 , is described. The structures of the obtained adducts have been assigned by means of spectroscopic measurements.     

Iron (III)‐porphyrin Complex FeTSPP as an efficient catalyst for synthesis of tetrazole derivatives via [2 + 3]cycloaddition reaction in aqueous medium

The metal complex (5,10,15,20‐tetrakis‐(4‐sulfonatophenyl)‐porphyrin‐iron (III) chloride (FeTSPP) was new employed in an environmentally benign protocol as an efficient catalyst for a “click” chemistry approach for the synthesis of tetrazole and guanindinyltetrazole derivatives via [2 + 3] cycloaddition reaction of nitriles and azide derivatives in aqueous medium. The synthesized compounds were obtained in excellent yield, short reaction times and a recoverable catalyst.     

One‐pot synthesis of 3,4‐dihydropyridin‐2‐ones via tandem reaction of Blaise reaction intermediate and acrylic ester

An efficient method for the synthesis 3,4‐dihydropyridin‐2‐ones has been developed via tandem one‐pot Michael‐type addition and cyclization of the Blaise reaction intermediate and acrylic ester. A series of readily available nitriles, bromoacetic esters and acrylic esters have been employed to examine the scope of substrates for this method. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel synthesis of 2‐amino[1,4,5]benzoxadiazepine derivatives via a mild one‐pot reaction

The diazonium salt of 2‐aminophenol 2 was coupled in situ with malononitrile derivatives 3a‐d , 2‐cyanomethylthiazolin‐4‐one 9 , 2‐cyanomethylbenzimidazole 11a , and 2‐cyanomethylbenzothiazole 11b to give 2‐amino[1,4,5]benzoxadiazepine derivatives 6a‐d, 10 and 12a,b via a one‐pot reaction.     

One‐pot synthesis of novel substituted pyrrolo[2,3‐d]pyrimidines using dry media

A convenient solvent‐free one‐pot synthesis of 1,3,5,7‐tetraaryl‐1,3,4,7‐tetrahydro‐2‐thio‐xopyrrolo[2,3‐d]pyrimidin‐4‐one derivatives using supported reagents under microwave irradiation is described. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:617–621, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20355     

One‐pot preparation of 3‐miktoarm star terpolymers via click [3 + 2] reaction

The preparation of 3‐miktoarm star terpolymers using nitroxide mediated radical polymerization (NMP), ring opening polymerization (ROP), and click reaction [3 + 2] are carried out by applying two types of one‐pot technique. In the first one‐pot technique, NMP of styrene (St), ROP of ε‐caprolactone (ε‐CL), and [3 + 2] click reaction (between azide end‐functionalized poly(ethylene glycol) (PEG‐N₃)/or azide end‐functionalized poly(methyl methacrylate) (PMMA‐N₃) and alkyne) are carried out in the presence of 2‐(hydroxymethyl)‐2‐methyl‐3‐oxo‐3‐(2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxy) propyl pent‐4‐ynoate, 2 , as an initiator for 48 h at 125 °C (one‐pot/one‐step). As a second technique, NMP of St and ROP of ε‐CL were conducted using 2 as an initiator for 20 h at 125 °C, and subsequently PEG‐N₃ or azide end‐functionalized poly(tert‐butyl acrylate (PtBA‐N₃) was added to the polymerization mixture, followed by a click reaction [3 + 2] for 24 h at room temperature (one‐pot/two‐step). The 3‐miktoarm star terpolymers, PEG‐poly(ε‐caprolactone)(PCL)‐PS, PtBA‐PCL‐PS and PMMA‐PCL‐PS, were recovered by a simple precipitation in methanol without further purification. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3588–3598, 2007     

Ligand‐free,copper‐catalyzed,one‐pot,three‐component synthesis of novel 1,2,3‐triazole‐linked indoles in magnetized water

Magnetized water (MW) is used as a green and new solvent‐promoting medium for the one‐pot, three‐component synthesis of novel 1,2,3‐triazole‐linked indoles catalyzed by copper iodide. A broad range of 2‐aryl‐1‐(prop‐2‐ynyl)‐1H‐indole‐3‐carbaldehydes were reacted with alkyl halides and sodium azide via copper‐catalyzed azide–alkyne cycloaddition reactions in MW in the absence of any ligand. This method offers the advantages of short reaction times, green procedure, low cost, simple work‐up, quantitative reaction yields, and no need for any organic solvent.     

Catalyst‐free Synthesis of Tetrahydroacenaphtho[1,2‐b]indolone Derivatives via One‐pot Four‐component Reaction

A simple and efficient one‐pot synthesis of tetrahydroacenaphtho[1,2‐b]indolone derivatives via four‐component reaction of 5,5‐dimethylcyclohexane‐1,3‐dione (dimedone), arylamines, acenaphthoquinone, and active methylene compounds under catalyst‐free conditions is described. The reactions were carried out under mild conditions using ethanol as solvent. Advantages of this method include simple experimental and workup procedure, readily available starting materials, and high yields.     

One pot synthesis of novel dispiro[oxindole‐thiazolidinedione/thioxo‐thiazolidinone/dihydro pyrazolone]‐pyrrolidines via 1,3‐dipolar cycloaddition reaction of azomethine ylides

A series of novel dispiro[oxindole‐thiazolidinedione]pyrrolidine, dispiro[oxindole‐thioxothiazolidinone]‐pyrrolidine, dispiro[oxindole‐dihydro‐pyrazolone]pyrrolidine were synthesized by both regio‐ and stereo‐selective 1,3‐dipolar cycloaddition reaction of azomethine ylide generated from amino acid and amino acid ester with π‐deficient alkenes in a single pot protocol in good yield. X‐ ray crystallographic studies established orthogonal disposition between spiro‐oxindole and spiro‐thiazolidinedione rings in 4a and 5a .     

One‐pot Three‐component Synthesis of Spiro[pyrazolo[3,4‐b]pyridine‐4,3′‐indoline] Derivatives Catalyzed by Melamine Trisulfonic Acid

Novel spiro[pyrazolo[3,4‐b]pyridine‐4,3′‐indoline] derivatives were prepared by the three‐component reaction of isatins 3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐amine and Meldrum's acid in the presence of a catalytic amount of melamine trisulfonic acid. This protocol provides a simple one‐step procedure with the advantages of easy work‐up, mild reaction conditions and environmentally benign.     

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

One‐pot synthesis of tetrahydroindeno[1,2‐b]pyrrolo‐3‐carboxylates derivatives

Tetrahydroindeno [1,2‐b]pyrrole‐3‐carboxylate were synthesized in a one‐pot procedure by the reaction of 1,3‐dicarbonyl and activated carbonyl compounds such as benzyl or ninhydrin in ethanol/water in the presence of ammonium acetate. J. Heterocyclic Chem., (2011).     

氨基磺酸催化下三组分一锅法无溶剂合成苯并[4,5]咪唑并[1,2-a]嘧啶类衍生物

无溶剂条件下,用氨基磺酸催化芳香醛,2-氨基苯并咪唑和β-二羰基化合物的三组分反应,简单而方便地得到了苯并[4,5]咪唑并[1,2-a]嘧啶类衍生物.该法具有产率高,成本低廉,环境友好,适应性广简捷方便等优点.     

Green synthesis of new thiouracilodepsipeptides in ionic liquid: One‐pot four‐component reaction of isocyanides

Thiouracil‐containing depsipeptides were produced via one‐pot four‐component condensation/Passerini tandem reaction of thiouracil, 2‐chloroacetic acid derivatives, ketones, and isocyanides in ionic liquid as green reaction media in high yields.