DC electrical conduction and morphological behavior of counter anion‐governed genesis of electrochemically synthesized polypyrrole films

Highly conducting polypyrrole (PPY) films, doped with various anions [pTS^?, ClO₄^?, and NO₃^? and mixed electrolyte system (pTS^? + ClO₄^?)], have been electrochemically synthesized in aqueous solution at ～275 K in an inert atmosphere. PPY exhibits metallic order dc conductivity at room temperature and shows variation of conductivity with respect to time of polymerization. Effect of dopant anion on growth mechanism of PPY is evident from its surface morphology. X‐ray photoelectron spectroscopy (XPS), used to examine the surface composition and doping level of various PPY films, confirms the anionic doping into the polymer backbone. Both XPS and ultraviolet–visible spectroscopy give evidence of formation of polarons and bipolarons. The temperature (4.2–320 K)‐dependent dc conductivity data of these PPY films have been explained by Mott's 3D variable‐range hopping conduction model. Mott's parameters have been estimated, and structural disorder with doping is correlated for all the samples. Mott's criterion for distant hopping sites prevails in case of moderately doped samples (PPY3, PPY4, and PPY5), whereas the hopping to nearest neighbor sites is found more suitable in case of highly doped samples (PPY1 and PPY2). The origin of these changes is due to the modification in the molecular structure of PPY, which is governed by different growth mechanisms for organic (pTS^?) and inorganic (ClO₄^? and NO₃^?) counter anions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Amperometric Study of Au‐Colloid Function on Xanthine Biosensor Based on Xanthine Oxidase Immobilized in Polypyrrole Layer

Four kinds of xanthine oxidase (XOD) based amperometric biosensors were fabricated and their analytical performances were compared. Polypyrrole (PPY)/XOD biosensor was constructed by electrochemical oxidation of pyrrole in the solution containing xanthine oxidase and pyrrole in this paper. Colloidal Au was then immobilized on the biosensor. On the other hand, electron mediator, Prussian Blue (PB), was deposited on the electrode before the immobilization of PPY/XOD to enhance electron‐transfer rate and current response. The results showed that PPY/XOD, PPY/XOD/Au‐colloid, PB/PPY/XOD and PB/PPY/XOD/Au‐colloid biosensors exhibit good response to xanthine in 1×10^?6 M and 2×10^?5 M and Michaelis‐Menten constants (K_m) of these biosensors were 242.2, 113.4, 144.5, 43.2 μmol?L^?1, respectively. The dependence of current responses with applied voltages was discussed, and different mechanisms of these biosensors were discussed. It has been found that colloidal Au can enhance the current response at the same concentration of xanthine solution and decrease the energy‐barrier of electron‐transfer reaction on the electrode.     

Synthesis of silanized maghemite nanoparticles onto reduced graphene sheets composites

Novel γ-Fe₂O₃@APTES@rGO composites are successfully synthesized by using graphene oxide and silanized maghemite nanoparticles. Graphene oxide and maghemite were obtained by Hummers and Massart methods, respectively. The silanization process was done to functionalize maghemite surface with a controllable quantity of amino groups. Then, by adding aqueous graphene oxide suspension, the bonding between graphene oxide and silanized maghemite nanoparticles was done in refluxing conditions. Afterwards, chemical reduced graphene oxide reaction was realized by addition of hydrazine solution. The characterization of γ-Fe₂O₃@APTES@rGO composites was studied by X-ray Diffraction, Fourier Transformed Infrared Spectroscopy, thermogravimetric analysis and scanning electron microscopy.     

Experimental and theoretical studies on the corrosion properties of some conducting polymer coatings

In this study, the effects of poly(N-ethylaniline) (PNEA) monolayer coating and PPY/PNEA and PNEA/PPY bilayer coatings, which were formed on the low carbon steel (LCS) surface by electropolymerization in 0.1 M monomer + 0.3 M oxalic acid medium, on the corrosion of the LCS in 1 M H₂SO₄ medium have been investigated. LCS electrodes, which were coated with each of these conductive polymer layers, were held in 1 M H₂SO₄ medium for various time periods, in order to obtain current potential curves, and with the help of these curves, the corrosion parameters have been determined. Experimental findings show that the LCS coated with polymer layers prevent the corrosion of bare LCS in 1 M H₂SO₄ medium and bilayer PPY/PNEA and PNEA/PPY coatings are better than monolayer PNEA coating. In order to elucidate the interaction between the coatings and the metal, theoretical calculations have been done using AM1 semiempirical method. The calculated data have been found to support experimental findings.     

Electrorheological and magnetorheological response of polypyrrole/magnetite nanocomposite particles

Magnetic nanoparticles of magnetite (Fe₃O₄) were synthesized within a conducting polypyrrole (PPY) matrix using a facile method, and employed as both electrorheological (ER) and magnetorheological (MR) materials to provide a well dispersed suspension of either ER or MR fluids. The PPY to Fe₃O₄ weight ratio was adjusted to 5 % to avoid possible deterioration of the magnetic properties of the Fe₃O₄ particles. Transmission electron microscopy and X-ray diffraction provided information on the structure and particle size of the PPY/Fe₃O₄. Both ER and MR performance of pure Fe₃O₄ and PPY/Fe₃O₄ nanocomposites were examined through rotational and oscillatory tests using a rotational rheometer under an applied electric and magnetic field, respectively, demonstrating typical ER and MR characteristics.     

Polymerization and oxidation of pyrrole by organic electron acceptors

Simultaneous chemical polymerization and oxidation of pyrrole have been initiated by organic electron acceptors, 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and tetrachloro-o-benzoquinone(chloranil). The polypyrrole (PPY) complexes so produced are semiconductive and granular in nature. For the PPY–DDQ and PPY–chloranil complexes obtained from bulk polymerization, the respective electrical conductivities (σ) are of the order of 10^?1 and 10^?3 ohm^?1 cm^?1. However, σ is substantially lower for the complexes prepared in solvent media. Both complexes are relatively stable in the atmosphere. Thin uniform films of the PPY–organic acceptor complexes have also been synthesized on SnO₂ electrode by electrochemical polymerization in acetonitrile. The physicochemical properties of the PPY–organic acceptor complexes prepared chemically under the various experimental conditions are examined in detail.     

Analysis of mono-nitrotoluenes in water samples by using nano-structured polypyrrol as a sorbent of solid-phase microextraction

Nano-structured polypyrrole (PPY) was used as a coating of solid-phase microextraction (SPME) fibre to increase the extraction efficiency of headspace solid phase microextraction (HS-SPME) of mono-nitrotoluene (MNT) isomers in water samples. The nano-structured PPY was prepared electrochemically by template-free method in the presence of dodecylbenzene sulphonate (DBS) as dopant. Nano-fibrous structures of PPY with a diameter in the range of 38–129 nm were obtained. The porous surface structure of the film, revealed by scanning electron microscopy (SEM), provided high surface areas and allowed for high extraction efficiency of MNT isomers. The extraction procedure was optimised by selecting the appropriate extraction parameters including the time and temperature of adsorption, salt concentration and stirring rate. The calibration graphs obtained by HS-SPME using the proposed fibre followed by GC-FID analysis were linear in a concentration range of 0.1–500 µg L^?1 (r > 0.999) with detection limits below 0.012 µg L^?1 for three isomers. Repeatability of the method was less than 6% (RSD%, n = 4). Good recoveries (88–108%) were obtained for the extraction of mono-nitrotoluenes in real water samples.     

A Magnetically Drivable Nanovehicle for Curcumin with Antioxidant Capacity and MRI Relaxation Properties

Curcumin possesses wide‐ranging anti‐inflammatory and anti‐cancer properties and its biological activity can be linked to its potent antioxidant capacity. Superparamagnetic maghemite (γ‐Fe₂O₃), called surface‐active maghemite nanoparticles (SAMNs) were surface‐modified with curcumin molecules, due to the presence of under‐coordinated Fe^III atoms on the nanoparticle surface. The so‐obtained curcumin‐modified SAMNs (SAMN@curcumin) had a mean size of 13±4 nm. SAMN@curcumin was characterized by transmission and scanning electron microscopy, UV/Vis, FTIR, and Mössbauer spectroscopy, X‐ray powder diffraction, bulk susceptibility (SQUID), and relaxometry measurements (MRI imaging). The high negative contrast proclivity of SAMN@curcumin to act as potential contrast agent in MRI screenings was also tested. Moreover, the redox properties of bound curcumin were probed by electrochemistry. SAMN@curcumin was studied in the presence of different electroactive molecules, namely hydroquinone, NADH and ferrocyanide, to assess its redox behavior. Finally, SAMN@curcumin was electrochemically probed in the presence of hydrogen peroxide, demonstrating the stability and reactivity of bound curcumin.     

Polypyrrole/multiwalled carbon nanotubes‐based biosensor for cholesterol estimation

The nanocomposite electrode comprising of polypyrrole (PPY) and carboxy functionalized multiwalled carbon nanotubes (MWCNT) has been electrochemically fabricated onto indium–tin–oxide (ITO) electrode using p‐toluene sulfonic acid (PTS). Cholesterol oxidase (ChOx) and cholesterol esterase (ChEt) have been immobilized onto this PPY– MWCNT/ITO nanocomposite electrode using N‐ethyl‐N‐(3‐dimethylaminopropyl) carbodiimide and N‐hydroxy succinimide chemistry for estimation of esterified cholesterol. The ChEt–ChOx/PPY–MWCNT/PTS/ITO bioelectrode has been characterized using Fourier transform infrared spectroscopy, electrochemical techniques, and scanning electron microscope. This ChEt–ChOx/PPY–MWCNT/PTS/ITO nanobioelectrode has a response time of about 9 s, linearity of 4 × 10^?4 to 6.5 × 10^?3 M/l of cholesterol oleate concentration, K_m of 0.02 mM, and thermal stability of upto 45°C. This electrode exhibits improved biosensing characteristics compared with other total cholesterol electrodes reported in literature till date and can be used to estimate cholesterol in blood serum samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation of uniform silica/polypyrrole core/shell microspheres and polypyrrole hollow microspheres by the template of modified silica particles using different modified agents

Silica/polypyrrole (PPY) core/shell microspheres and PPY hollow microspheres were prepared by the template of silica particles whose surface character was modified with different modified agents. The morphology and structure of the particles were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Elemental analysis and X-ray photoelectron spectroscopy (XPS) were carried out to characterize the structure of PPY hollow microspheres. We investigated the effect of different modified agents on the surface character of silica particles and the effect of surface character of silica particles on the morphology of PPY hollow microspheres. The effect of reaction conditions on the size of core/shell particles and hollow particles was also studied.     

A study of ion exchange selectivity coefficient by cyclic voltammetric measurement

An equation to express ion exchange selectivity coefficient was derived and used for calculating that of PPY film with the results obtained by cyclic voltammetric measurement. PPY film was synthesized by electrochemical method in aqueous solution using K₄Fe(CN)₆ as supporting electrolyte, and the anions were doped into the film. Ion exchange behaviour of doped Fe (CN)₆^3-/4- in the PPY film with Cl^?, NO₃^? or F^? ions in solution has been studied, and the corresponding ion exchange selectivity coefficients were determined.     

Application of response surface methodology to optimize the process variables for fluoride ion removal using maghemite nanoparticles

Adsorption of fluoride ion was done from its aqueous solution by using maghemite (γ-Fe₂O₃) nanoparticles. Effects of the major independent variables (temperature, adsorbent dose and pH) and their interactions during fluoride ion adsorption were determined by response surface methodology (RSM) based on three-level three-factorial Box–Behnken design (BBD). Optimized values of temperature, maghemite nanoparticle dose and pH for fluoride sorption were found as 313 K, 0.5 g/L, and 4, respectively. In order to investigate the mechanism of fluoride removal, various adsorption isotherms such as Langmuir, Freundlich, Temkin and Florry–Huggins were fitted. The experimental data revealed that the Langmuir isotherm gave a more satisfactory fit for fluoride removal. The adsorption process was rapid and obeyed pseudo-second-order kinetics. The values of thermodynamic parameters ΔG°, ΔH° and ΔS° indicated that adsorption was spontaneous and endothermic in nature.     

Synthesis of mesoporous maghemite with high surface area and its adsorptive properties

Mesoporous maghemite (γ-Fe₂O₃) with high surface area was prepared by the thermal decomposition of Fe–urea complex ([Fe(CON₂H₄)₆](NO₃)₃) with the aid of cetyltrimethyl ammonium bromide (CTAB), and its adsorption ability for the removal of fluoride was investigated. X-ray diffraction (XRD), nitrogen adsorption–desorption measurements, transmission electron micrograph (TEM) observations, and magnetic measurements show that the γ-Fe₂O₃ has a mesoporous structure and its crystallite size, specific surface area, and magnetic properties can be controlled by varying the content of CTAB in [Fe(CON₂H₄)₆](NO₃)₃. The maximum adsorption capacity of the mesoporous γ-Fe₂O₃ for fluoride is estimated to be 7.9 mg/g, which suggests that the mesoporous γ-Fe₂O₃ is an excellent adsorbent for fluoride.     

The effect of Nafion ionomer on electroactivity of palladium–polypyrrole catalysts for oxygen reduction reaction

Present studies concentrated on the preparation, characterization, and electroactivity of palladium–polypyrrole (Pd/PPY) catalysts for oxygen reduction reaction. In particular, the effect of Nafion ionomer on their electroactivity was evaluated. In all catalysts prepared by “water-in-oil” microemulsion method, the Pd nanoparticles of ca. 7 nm in size appeared regardless of the Pd content (ranging from 2 to 20 wt.%). For comparison, carbon black-supported (Vulcan XC-72) catalyst (20 wt.% Pd) was also synthesized. Coating of the Pd/PPY samples with Nafion ionomer reduced their surface area and porosity. Chemical interaction due to Nafion acid functionalities affected the N-state of pyrrole as well as electron state of Pd in the Pd/PPY catalysts. As a result, the contribution of more oxidized palladium (Pd^δ+) increased. These interactions played an essential role in the electroactivity of Pd/PPY for oxygen reduction reaction. The increased amount of Nafion relative to that of PPY reduced limiting current density whereas the half-wave potential shifted to a more positive value and the fraction of hydrogen peroxide remarkably decreased.     

Surface modification of iron oxide nanoparticles by a phosphate‐based macromonomer and further encapsulation into submicrometer polystyrene particles by miniemulsion polymerization

A new strategy relying on the use of a phosphate‐based macromonomer (PAM200) to modify the surface of iron oxide nanoparticles was developed for the synthesis of submicrometer polystyrene (PS) magnetic particles. First, iron oxide nanoparticles were synthesized using the coprecipitation of ferrous and ferric salts in alkaline medium. Besides the classical oleic acid (OA)/octane‐based ferrofluid, styrene‐based ferrofluids were elaborated with either OA or PAM200 as the stabilizer. In all cases, maghemite (γ‐Fe₂O₃) was clearly identified, with nanoparticles rather spherical in shape but exhibiting broad particle size distribution (PSD). Both OA and PAM200 led to stable maghemite‐based ferrofluids showing superparamagnetic properties. Further use of these ferrofluids in styrene miniemulsion polymerization resulted in inhomogeneous distribution of maghemite among and inside the polymer particles with OA‐based ferrofluids, whereas PAM200/styrene‐based ferrofluids led to magnetic particles with homogeneous distribution of maghemite inside PS particles. Broad PSD and small nonmagnetic particles were however observed. The true mechanisms operating in these systems are still to elucidate, but this study validates PAM200 as an efficient compatibilizing agent between hydrophilic maghemite and hydrophobic PS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 327–340, 2008     

Plasma protein adsorption and thrombus formation on surface functionalized polypyrrole with and without electrical stimulation

A surface modification technique was developed in which heparin was covalently immobilized onto electrically conductive polypyrrole (PPY) film through poly(ethylene glycol) methacrylate (PEGMA) graft copolymerization and subsequent cyanuric chloride activation. In vitro plasma protein adsorption and thrombus formation experiments were carried out on the various films. The PEGMA-graft-copolymerized PPY surfaces with immobilized heparin have good bioactivity indicated by low level of protein adsorption, high ratio of albumin to fibrinogen adsorption, and low thrombus formation, making them potentially good candidates for biomedical applications. Since the PPY film retained significant electrical conductivity after surface modification, the effect of electrical stimulation on protein adsorption and thrombus formation was also evaluated. The covalently immobilized heparin on the PPY film was able to retain its bioactivity after 4 days of immersion in PBS. The film after long-term immersion in PBS also retained sufficient electrical conductivity for electrical stimulation still to be effective for reducing protein adsorption.     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

Electrochemical study of the corrosion behaviour of carbon steel in fracturing fluid

Corrosion behaviour of carbon steel (K-55) in fracturing fluid was studied with a rotation cylinder electrode, under static and rotation conditions by means of several electrochemical techniques which are as follows: open circuit potential (OCP) decay, potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS). The corrosion rate was determined by weight loss measurements. The electrode surface after a prefixed immersion time was characterised by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results indicated that carbon steel showed anodic dissolution behaviour that increased under rotating condition. The cathodic polarisation current density also increased with the electrode rotation due to the increased oxygen diffusion on the electrode surface. Two different oxide layers were formed: a dark, thin layer of magnetite tightly adhering to the electrode surface, characterised by localised corrosion spots, and a porous reddish layer of poorly adhering hematite (Fe₂O₃) and maghemite (γ-Fe₂O₃). Under higher rotation rate, the developed oxide layer was not so stable, owing to the shear stress induced between the solution and the specimen surface, enhancing the corrosion rate.     

Sol–gel synthesis of mesoporous silicas containing albumin and guanidine polymers and its application to the bilirubin adsorption

The organic–inorganic composite materials based on mesoporous silica were synthesized using sol–gel method. The surface area of silicas was modified by bovine serum albumin (BSA) and guanidine polymers: polyacrylate guanidine (PAG) and polymethacrylate guanidine. The mesoporous silicas were characterized by nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, transmission electron microscopy. The obtained materials were used as adsorbents for selective bilirubin removal. It was shown that the structural properties and surface area of modified materials depend on the nature of polymers. Incorporation of polymers in silica gel matrix during sol–gel process leads to the formation of mesoporous structure with high pore diameter and a BET surface area equals to 346 m²/g for SiO₂/BSA and 160 m²/g for SiO₂/PAG. Analysis of adsorption isotherms showed that modification of silica by BSA and guanidine polymers increases its adsorption ability to bilirubin molecules. According to Langmuir model, the maximum bilirubin adsorption capacity was 1.18 mg/g.     

Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.