Synthesis,crystal structure,thermal decomposition,and XPS studies of homo and heterotrinuclear Cu(II)–Cu(II)–Cu(II) and Cu(II)–Ni(II)–Cu(II) complexes obtained from salpn type ligands

In this study, a mononuclear CuL complex was prepared by the use of bis-N,N′-(salicylidene)-1, 3-propanediamine (LH₂) and Cu²⁺ ion. NiCl₂ and NiBr₂ salt were treated with this complex in dioxanewater medium and two new complexes [(CuL)₂NiCl₂(H₂O)₂] and [(CuL)₂NiBr₂(H₂O)₂)] with Cu(II)–Ni(II)–Cu(II) nucleus structure were obtained. In addition to this bis-N,N′-(2-hydroxybenzyl)-1,3-diaminopropane (L^HH₂) was prepared by the reduction of LH₂ with NaBH₄ in MeOH medium. The treatment of this reduced complex with Cu²⁺ ion resulted a complex [(CuL^H)₂CuCl₂] with a structure of Cu(II)–Cu(II)–Cu(II). The complexes prepared were characterized by the use of elemental analysis, IR spectroscopy, thermogravimetric and X-ray diffraction methods. The crystal structures of [(CuL)₂NiBr₂(H₂O)₂] (СIF file CCDC 1448402) and [(CuL^H)₂CuCl₂] (СIF file CCDC 1448401) complexes were elucidated. It was found that halogen ions are coordinated to terminal Cu²⁺ ions which are in a distorted square pyramid coordination sphere. It was determined that the central Cu(II), which joins terminal square pyramidal Cu(II), was coordinated only by the phenolic oxygens of the ligand while the central Ni(II) was coordinated by two phenolic oxygens of the organic ligand and two water molecules. These complexes were investigated by XPS and it was found that the terminal and central Cu²⁺ ions were different in Cu(II)–Cu(II)–Cu(II) complex. Also, the thermal degradation of the CuLH complex unit was observed to exothermic in contrast to the expectations.

     

Nano-scale dissolution phenomena in Al–Cu–Mg alloys

Localized corrosion of aluminum alloys is a major issue worldwide and in spite of decades of work, several questions still remain unresolved. In this study we focus on key issues in the context of localized corrosion of Al–Cu–Mg/Al–Mg–Cu alloys that have not been adequately addressed. By careful electrochemical exposure along with high-resolution electron microscopy, we reveal that microstructural features down to a few nanometers in size can behave as unique electrochemical entities. In addition, not only is this critical to emerging damage accumulation models, but we also reveal that significant dissolution can occur at potentials below the breakdown potential of the bulk alloy. This work has potentially wide consequences in the interpretation of Al alloy corrosion and alloys design for corrosion resistance.     

Electrochemical and structural characterization of sputter-deposited Mg–Nb and Mg–Nb–Al–Zn alloy films

Nanocrystalline Mg–Nb and Mg–Nb–Al–Zn alloy films were deposited by dc magnetron sputtering on glass and quartz substrates in a wide range of niobium concentrations from 6 to 80 at.%. Structural, electrochemical and corrosion properties of the films were studied by X-ray diffraction, dc voltammetry, electrochemical impedance spectroscopy and electrochemical quartz crystal microbalance. Development of body-centred cubic Nb structure in the Mg–Nb alloy matrix yielded the effects of lattice contraction, grain refining and electrochemical passivity. The measurements showed high corrosion resistance of the films in alkaline solutions when niobium content was one third or more. An increased corrosion resistance was achieved by introducing minor amounts of Al (ca. 2 at.%). In particular, such Al effect was pronounced at lower Nb concentrations (20 to 30 at.%). Semiconductor properties of spontaneously formed oxide on Mg–Nb alloy were studied by Mott–Schottky plots, which indicated highly doped n-type oxide structures on Mg–Nb surface. The paper fills some gap in understanding of niobium–magnesium systems, which show potential for applications in hydrogen storage, switchable mirrors and corrosion protection.     

Synthesis, structural characterisation and thermal decomposition studies of some 2,4′-bipyridyl complexes with cobalt(II), nickel(II) and copper(II)

2,4-Bipyridyl (2,4-bipy orL) complexes with cobalt(II), nickel(II) and copper(II) of the formulae M(2,4-bipy)₂(CH₃COO)₂·2H₂O (M(II) = Co, Ni, Cu), Co(2,4-bipy)₂SO₄·3H₂O or Ni(2,4-bipy)₂SO₄·4H₂O have been prepared and their IR and electronic (VIS) spectra are discussed. The thermal behaviour of the obtained compounds has also been studied. The intermediate products of decomposition at different temperatures have been characterized by chemical analysis and X-ray diffraction.We thank dr. A. Malinowska for performing VIS spectra. This work was supported by the KBN project No. PB 0636/P3/93/04.     

Solution and structural studies of the Cd(II) – Aconitate system

The complexing ability of the binary system trans-aconitic acid (H₃L) with regard to Cd(II) and the crystal structures of the binary system Cd(II)–(H₃L), [Cd₃L₂(H₂O)₆] n(1) and ternary systems of Cd(II)–(H₃L)–Lewis base [Lewis base = 1,10-phenanthroline (2) and 2,2′-bipyridine (3)] have been determined. Compound 1 is a rare binodal four-connected three-dimensional (3D) metal-organic framework possessing a moganite (mog) topology. Compounds 2 and 3 represent infinite one-dimensional (1D) chains forming three-dimensional metal-supramolecular structures through H-bond and π–π stacking interactions. All compounds have been characterized by spectroscopic and thermogravimetric techniques.     

Spectral, magnetic and thermal characterisation of new Co(II), Ni(II) and Cu(II) complexes with Schiff base 5-bromo-N,N′-bis-(salicylidene)-o-tolidine

Starting from 5-bromo-N,N′-bis-(salicylidene)-o-tolidine (H₂L) new complexes with Co(II), Ni(II) and Cu(II) were synthesised and characterised. The features of complexes have been assigned from microanalytical, IR, UV–Vis–NIR and EPR spectra, magnetic data at room temperature as well as thermal analysis. IR data are in accordance with bischelate nature of the deprotonated ligand that coordinates through azomethinic nitrogen and phenolic oxygen. The electronic spectra display the characteristic pattern of tetrahedral stereochemistry for [CoL]·H₂O complex and octahedral one for [NiL(OH₂)₂]·H₂O complex. The electronic spectra correlated with magnetic susceptibility measurements indicate a square-planar surrounding for [ML] (M:Ni, Cu) species, while the EPR spectrum of copper complex sustains the proposed stereochemistry. The thermal analysis evidenced that thermal transformations are complex processes according to TG, DTA and DTG curves including (crystallization or coordination) water elimination, thermolyses and oxidative degradation of Schiff base. All these processes lead to the most stable metallic oxides as final product.     

Phase transformations in commercial cold-rolled Al–Zn–Mg–Cu alloys with Sc and Zr addition

Journal of Thermal Analysis and Calorimetry - The influence of cold rolling on thermal and mechanical properties together with microstructure observation of cast AlZnMgCu(ScZr) alloys has been...     

Soft template synthesis in copper(II)–dithiooxamide–methanal,copper(II)–dithiooxamide–ethanal and copper(II)–dithiooxamide–propanone triple systems in a copper(II)hexacyanoferrate(II) gelatin-immobilized matrix

Novel complexing processes in the Cu^II–dithiooxamide–methanal, Cu^II–dithiooxamide–ethanal and Cu^II–dithiooxamide–propanone triple systems proceeding under specific conditions, to copper(II)hexacyanoferrate(II) gelatin-immobilized matrix systems in contact with aqueous-alkaline (pH 12) solutions containing dithiooxamide and methanal, ethanal or propanone, have been studied. It has been shown that template synthesis leading to the formation of macrocyclic coordination compounds (2,8-dithio-3,7-diaza-5-oxanonandithioamide-1,9)copper(II), (2,8-dithio-3,7-diaza-4,6-dimethyl-5-oxanonandithio-amide-1,9)copper(II) and (4,4,6-trimethyl-2,8-dithio-3,7-diazanonen-6-dithioamide-1,9)copper(II), respectively, takes place under such conditions. Dithiooxamide, methanal, ethanal and propanone act as ligand synthons in these processes.     

LC-MS analysis in the aquatic environment and in water treatment – a critical review

LC-MS has become an invaluable technique for trace analysis of polar compounds in aqueous samples of the environment and in water treatment. LC-MS is of particular importance due to the impetus it has provided for research into the occurrence and fate of polar contaminants, and of their even more polar transformation products. Mass spectrometric detection and identification is most widely used in combination with sample preconcentration, chromatographic separation and atmospheric pressure ionization (API). The focus of the first part of this review is directed particularly toward instruments and method development with respect to their applications for detecting emerging contaminants, microorganisms and humic substances (HS). The current status and future perspectives of 1) mass analyzers, 2) ionization techniques to interface liquid chromatography (LC) with mass spectrometry (MS), 3) methods for preconcentration and separation with respect to their application for water analysis are discussed and examples of applications are given. Quadrupole and ion trap mass analyzers with electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) are already applied in routine analysis. Time-of-flight (TOF) mass spectrometers are of particular interest for accurate mass measurements for identification of unknowns. For non-polar compounds, different ionization approaches have been described, such as atmospheric pressure photoionization (APPI), electrochemistry with ESI, or electron capture ionization with APCI. In sample preconcentration and separation, solid phase extraction (SPE) with different non-selective sorbent materials and HPLC on reversed-phase materials (RP-HPLC) play the dominant role. In addition, various on-line and miniaturized approaches for sample extraction and sample introduction into the MS have been used. Ion chromatography (IC), size-exclusion chromatography (SEC), and capillary electrophoresis (CE) are alternative separation techniques. Furthermore, the issues of compound identification, matrix effects on quantitation, development of mass spectral libraries and the topic of connecting analysis and toxicity bioassays are addressed.     

Nickel(II) and copper(II) – l-cysteine,l-methionine,l-tryptophan-nucleotide ternary complexes

Four new ternary complexes of Cu^II with l-methionine and the nucleotides 5AMP (adenosine 5-phosphate), 5GMP (guanosine 5-phosphate) and 5IMP (inosine 5-phosphate), and with l-tryptophan and 5AMP, were synthesized and characterized by elemental analysis and i.r. spectroscopy. One ternary complex of N^II with l-cysteine and 5IMP was also prepared and characterized. The study of the three ternary compounds of Cu^II, of general formulae Cu-5NMP-l-methionine, indicates coordination of the phosphate group and of N(7) of the purinic ring. l-Methionine is bound by the carboxylic and amino groups. The ternary complex obtained from a mixture of Cu-5AMP and l-tryptophan is a dimer in which the nucleotide bridges the two copper atoms. In the complex of Ni-5IMP and l-cysteine, the nucleotide seems to bind the metal through the N(7) of the heterocyclic ring, and the l-cysteine is coordinated as a bidentate chelate by the carboxyl and thiol groups. E.s.r. spectra of the copper complexes are in good agreement with the low symmetry structure proposed. The one-electron reduction potentials E_c(Fc⁺/Fc) (V) of Cu^II to Cu^I were established for the four copper complexes from cyclic voltammetry studies. The one-electron oxidation potential E_a(Fc⁺/Fc⁺) (V) of Ni^II to Ni^III was also measured for the nickel complex.     

Solvent free synthesis,characterization, DFT,cyclic voltammetry and biological assay of Cu(II), Hg(II) and UO2(II) – Schiff base complexes

A series of metal ion complexes was prepared in solid state from Cu(II), Hg(II) and UO₂(II) ions with 3-oxo-3-(2-(2-oxoindolin-3-ylidene)hydrazineyl)-N-phenylpropanamide (H₃L) ligand through solvent free synthesis methodology. The chemical formulae of the new compounds were estimated according to variable spectral and analytical investigations. The ligand exhibited a neutral or mononegative tetradentate mode of coordination towards the central ions inside the octahedral arrangement that proposed for the three complexes. The DFT/B3LYP method was applied under different basis sets (6-31G*or SDD) to optimize the structures of new compounds except the UO₂(II) complex. The computational data were investigated to verify the binding mode that suggested spectrally. Moreover, studies in solution regarding Cu(II) ion via cyclic voltammetry were performed in absence or presence of H₃L, to realize the significant effect of complex formation on the electrochemical manners of copper. The shifts in the potential peaks accompanied by the changes in the values of parameters correspond to kinetic and thermodynamic. Also, the solvation and kinetic characteristics for the cathodic and anodic potential of Cu(II) ion in absence or presence of H₃L at different scan rates, were estimated. Finally, the ligand and copper ion exhibited high affinity towards complexation in solution. Furthermore, the activity of the new compounds towards inhibiting microbes was studied against Staphylococcus aureus (G+) and Escherichia coli (G-) bacteria as well as Candida albicans (fungus) by determining the inhibition zone diameter. Also, both the antioxidant and cytotoxic activity of the isolated compounds were evaluated. Commonly, a remarkable antimicrobial and anticancer activity was appeared with UO₂(II) complex and the ligand. While, the antioxidant activity of all compounds appeared lower.     

Copper(II)–8-mercaptoquinoline,copper(II)–5,8-dimercaptoquinoline and copper(II)–5-thiomethyl-8-mercaptoquinoline complexing in a copper(II)hexacyanoferrate(II) gelatin-immobilized matrix

Novel complexing processes in the Cu^II–8-mercaptoquinoline, Cu^II–5,8-dimercaptoquinoline and Cu^II–5-thiomethyl-8-mercaptoquinoline systems proceeding in the copper(II)hexacyanoferrate(II) gelatin-immobilized matrix in contact with aqueous solutions of the ligands indicated, have been studied. Under the conditions specified for complexing in the Cu^II–8-mercaptoquinoline system, only a monomeric water-insoluble coordination compound was formed. In the Cu^II–5,8-dimercaptoquinoline system, three coordination compounds were formed and, in the Cu^II–5-thiomethyl-8-mercaptoquinoline system, two such compounds were formed. Conversely, complexing in solution or solid phase results in the formation only coordination compounds in each of the system studied.     

LC-MS analysis in the aquatic environment and in water treatment technology – a critical review

Environmental contaminants of recent concern are pharmaceuticals, estrogens and other endocrine disrupting chemicals (EDC) such as degradation products of surfactants, algal and cyanobacterial toxins, disinfection by-products (DBPs) and metalloids. In addition, pesticides (especially their transformation products), microorganisms, and humic substances (HS), in their function as vehicles for contaminants and as precursors for by-products in water treatment, traditionally play an important role. The present status of the application of LC-MS techniques for these water constituents are discussed and examples of application are given. Solid-phase extraction with various non-selective materials in combination with liquid chromatography (LC) on reversed-phase columns have been the most widely used methods for sample preconcentration and separation for different compound classes like pesticides, pharmaceuticals or estrogens. Electrospray ionization (ESI) and atmospheric pressure ionization (APCI) are the most frequently used ionization techniques for polar and ionic compounds, as well as for less polar non-ionic ones. The facilities of LC-MS have been successfully demonstrated for different compound classes. Polar compounds from pharmaceuticals used as betablockers, iodinated X-ray contrast media, or estrogens have been determined without derivatization down to ultratrace concentrations. LC-MS can be viewed as a prerequisite for the determination of algal and cyanobacterial toxins and the homologues and oligomers of alkylphenol ethoxylates and their metabolites. Tandem mass spectrometric techniques and the use of diagnostic ions reveal their usefulness for compound-class specific screening and unknown identification, and are also valid for the analysis of pesticides and especially for their transformation products. Structural information has been gained by the application of LC-MS methods to organometallic species. New insights into the structural variety of humic substances have been made possible by FT-ICR-MS due to its ultrahigh mass resolution. Finally, exciting possibilities for rapid detection and identification of microorganisms have been made possible by MALDI and LC-MS methods.     

Synthesis, characterization and cyclic voltammetric studies of β-ketooximato ruthenium(II) complexes

Summary -Ketooxime [RC(O)C(NOH)R] (R = Me or Ph) ligands (HL) react with [Ru(PPh₃)₃Cl₂] in refluxing EtOH to yield [Ru(PPh₃)₂(L)₂] complexes. For R = Me, one isomer was obtained, while two isomers were isolated when R = Ph, due to a bulk effect. The complexes are diamagnetic and absorb intensely in the vis. region due to MLCT transitions. In MeCN and CH₂Cl₂ solution, Ru^II-Ru^III oxidation occurs in the 0.69–0.92 V versus s.c.e. range. The oxidation potential depends on both the electronic nature of R and the stereochemistry of the complexes.     

Palladium(II)-catalyzed Suzuki–Miyaura reactions of arylboronic acid with aryl halide in water in the presence of 4-(benzylthio)-N,N,N-trimethybenzenammonium chloride

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)₂ and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na₂CO₃ in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.     

Biophysical,spectroscopic and biochemical investigation of DNA–Cu(II)-GSH interactions

The interaction of DNA with Copper(II)-Glutathione (CuGSH) has been investigated by various biophysical methods. The interaction ratio of DNA and Copper(II)-Glutathione in solution phase has been determined spectrophotometrically and found to be 0.25. EPR spectroscopy and UV–Vis findings suggest that Cu(II)-Glutathione neither bound to the DNA bases covalently nor intercalated, this has further been substantiated by the determination of intrinsic binding constant (2.1 × 10²). Viscometric measurements also support this type of binding to DNA by Cu(II)-Glutathione. EPR studies and visible d–d spectra of CuGSH after interaction with DNA, suggested that Copper remained in the Copper(II) state. DNA conformations after interaction with Cu(II)-Glutathione has been determined spectroscopically. Circular dichroism studies revealed that the B conformation of DNA is changed to A after interaction with Cu(II)-Glutathione. This has further been substantiated by thin film IR (Infrared) studies.     

Activity coefficients of rubidium chloride and cesium chloride in methanol–water mixtures and a comparative study of Pitzer and Pitzer–Simonson–Clegg models (298.15 K)

Activity coefficients of rubidium chloride and cesium chloride in methanol–water mixed solvent systems were determined by electromotive force (EMF) measurements at 298.15 K, in the range 0–40% (wt.%) methanol. For our work, the cells:

Rb-ISE | RbCl (m), methanol (Y), water (1 − Y) | Cl-ISE;  Cs-ISE | CsCl (m), methanol (Y), water (1 − Y) | Cl-ISE

Metal–organic polymers of Sr(II) and Ce(IV): structural studies,supramolecular synthons,and potentiometric measurements

Two metal–organic coordination polymers based on a salt, (pydcH)₃·(pipzH₂)_1.5·(H₂O)_3.7, between pyridine-2,6-dicarboxylic acid, pydcH₂, and piperazine, pipz, formulated as (pipzH₂)[Sr(pydc)₂(H₂O)₂]_n·4H₂O and [Ce(pydc)₂(H₂O)₂]_n·4H₂O were prepared. The synthesis, IR spectroscopy, elemental analysis, single-crystal X-ray diffraction, supramolecular synthons, and potentiometric measurements were investigated. The chemical environment around each Sr(II) or Ce(IV) was a distorted tricapped trigonal prism. The butterfly- and ladder-like structures of these complexes were bridged by oxygens of (pydc)^2– and M–O(pydc)–M bonds. In the crystal structure, intermolecular O–H?O, N–H?O, and C–H?O hydrogen bonds result in the formation of supramolecular structures. The stoichiometry and stability of the pydc–pipz system with Sr(II) in aqueous solution were investigated by potentiometric titration. The stoichiometry of complex species in solution was found to be similar to the cited crystalline metal ion complexes.