Direct electrochemical synthesis and characterization of copper(II), iron(II) and iron(III) complexes with 1- and 2-substituted pyridines

Summary The electrochemical oxidation of anodic metals (iron and copper) in MeCN solutions of 2-pyridinone (HOPy), 1-hydroxy-2-pyridinethione (HPT), 2-pyridinemethanethiol-1-oxide (HPMTO) or its dimer 2,2-dithiodimethyldipyridine-1,1-dioxide (PMTO)₂, gave the simple complexes Fe(OPy)₂ · H₂O, Cu(OPy)₂ · 3H₂O, Fe(PT)₂ · 3H₂O, Fe(PT)₃, Cu(PT)₂, Fe(PMTO)₂·3H₂O and Cu(PMTO)₂·H₂O, respectively. When 1,10-phenanthroline (phen) was added to the electrolytic phase, only two mixed complexes were obtained: Cu(OPy)₂phen·3H₂O and Fe(PT)₂phen·2H₂O. The possible molecular structures of the complexes were studied on the basis of their i.r. spectra and magnetic properties.     

Geometry of new iron(III) and copper(II) azo-nitroso-complexes

Summary The synthesis and characterization of new iron(III) and copper(II) complexes of substituted phenylazo-2,4-dinitrosoresorcinol complexes are described. The iron complexes are of octahedral geometry (high-spin and low-spin states). The electronic transitions and the ligand field parameters (B, and ) are assigned and calculated. Two series of copper complexes were prepared, mononuclear and dinuclear, with distorted tetrahedral and square planar configurations, respectively. The adducts of the complexes with pyridine have square pyramidal structures. Complex formation takes placevia the azo-group and the phenolic oxygen atom in most cases.     

Flow-injection simultaneous determination of iron(III) and copper(II) and of iron(III) and palladium(II) based on photochemical reactions of thiocyanato-complexes

The flow injection analysis systems have been developed for the simultaneous determination of iron(III) and copper(II) and of iron(III) and palladium(II) based on the photochemical reactions of their thiocyanato-complexes. In the first system, a sample solution was injected in to nitric acid solution and mixed with ammonium thiocyanate solution, followed by spectrophotometric monitoring of the thiocyanato-complexes formed. Another aliquot of the same sample solution was injected and the thiocyanato-complexes formed in the same way were irradiated by UV light before spectrophotometric monitoring. In another system, the absorbance of thiocyanato-complexes formed by each sample injection was monitored with two flow cells aligned with the same optical path before and after UV irradiation. The difference in the extent of photochemical decomposition of the thiocyanato-complexes enabled simultaneous determinations of iron(III) and copper(II) and of iron(III) and palladium(II) at levels of several μg ml⁻¹ to some tens μg ml⁻¹ in their admixtures. Sample throughputs are 40 and 20 h⁻¹ by the former and latter systems, respectively.     

Amidino-containing Schiff base copper(II) and iron(III) chelates as a thrombin inhibitor

Four series of Schiff base copper(II) and iron(III) chelates were synthesized from 4-formyl-3-hydroxybenzamidine or 3-formyl-4-hydroxybenzamidine and various L- or D-amino acids. Their inhibitory activities for bovine alpha-thrombin (abbreviated as thrombin) were determined. The most potent thrombin inhibitor in this series is copper(II) chelate (1g') derived from 4-formyl-3-hydroxybenzamidine and D-Trp. Its Ki value, 2.7x10(-8) M, is comparable to that of Argatroban (MD-805), which is a clinically used compound. The iron(III) chelates derived from 4-formyl-3-hydroxybenzamidine and hydrophobic L-amino acids (Val, Ile, Leu, Phe, Trp, Met) also exhibited higher inhibitory potency. It appears that coordination geometry composed of metal ion, amidino group, amino acid side chain is well accommodated to the thrombin active site. From the Ki values of Schiff base metal chelates for thrombin, the structure-activity relationships between the chelates and active site of thrombin were discussed.     

Spectrophotometric study of etodolac complexes with copper (II) and iron (III)

A rapid, simple, and selective method was developed for the determination of etodolac. The method depends on complexation of etodolac with copper (II) acetate and iron (III) chloride followed by extraction of complexes with dichloromethane and then measuring the extracted complexes spectrophotometrically at 684 and 385 nm in case of Cu (II) or Fe (III), respectively. Different factors affecting the reaction, such as pH, reagent concentration, and time, were studied. By use of Job's method of continuous variation, the molar ratio method, and elemental analysis, the stoichiometry of the reaction was found to be in the ratio of 1:2 and 1:3, metal:drug in the case of Cu (II) and Fe (III), respectively. The method obeys Beer's law in a concentration range of 2.00-9.00 and 0.50-2.00 mg/mL in case of Cu (II) and Fe (III), respectively. The stability of the complexes formed was also studied, and the reaction products were isolated for further investigation. The complexes have apparent molar absorptivities of about 32.14 +/- 0.97 and 168.32 +/- 1.12 for Cu (II) and Fe (III), respectively. The suggested procedures were successfully applied to the analysis of pure etodolac and its pharmaceutical formulations. The validity of the procedures was further ascertained by the method of standard additions, and the results were compared with other reported spectrophotometric methods and showed no significant difference in accuracy and precision.     

Direct electrochemistry of cytochrome P450 in a biocompatible film composed of an epoxy polymer and acetylene black

We report on a composite matrix composed of epoxy copolymers P (GMA-co-MPC) and acetylene black that can be used to entrap cytochrome P450. The composite provides a biocompatible microenviroment and can substantially accelerate the electron transfer between the cytochrome P450 and the electrode. The electrochemical response is characterized by a pair of well-defined redox peaks for the heme Fe(II/III) redox couples were observed at ?483?mV (vs. SCE). The immobilized cytochrome P450 exhibits excellent electrocatalytical activity to diethylstilbestrol (DES). The amperometric response varied linearly with the concentration of DES in the 0.2 to 2.8?μM concentration range. The biosensor displays a detection limit 5.9?×?10^-8?mol?L^-1 and thus represents a promising candidate for studying the electrochemistry of cytochrome P450s and its sensing applications.

Sequential flow-injection spectrophotometric determination of iron(II) and iron(III) by copper(II)-catalyzed reaction with Tiron

A flow injection method for the sequential determination of iron(II) and iron(III) was developed. It is based on the differential reaction kinetics of iron(II) and iron(III) with Tiron in a double-injection FI system. The proposed method employs the accelerating action of copper(II) for the oxidation of iron(II) in the presence of Tiron. A linear calibration graph is obtained for iron (II) and iron(III) in the concentration range 1.8 × 10^–5– 1.8 × 10^–4 mol/L; the throughput of samples is 30 injections/h. Received: 22 October 1996 / Revised: 4 December 1996 / Accepted: 10 December 1996     

Sequential flow-injection spectrophotometric determination of iron(II) and iron(III) by copper(II)-catalyzed reaction with Tiron

A flow injection method for the sequential determination of iron(II) and iron(III) was developed. It is based on the differential reaction kinetics of iron(II) and iron(III) with Tiron in a double-injection FI system. The proposed method employs the accelerating action of copper(II) for the oxidation of iron(II) in the presence of Tiron. A linear calibration graph is obtained for iron (II) and iron(III) in the concentration range 1.8 × 10^–5– 1.8 × 10^–4 mol/L; the throughput of samples is 30 injections/h.     

Response of a copper(II) and iron(III) ion-selective electrode bielectrode array in saline media

A bielectrode array comprising a jalpaite membrane (i.e., Ag_1.5Cu_0.5S) copper(II) ion-selective electrode (ISE) and chalcogenide glass membrane (i.e., Fe_2.5(Se₆₀Ge₂₈Sb₁₂)_97.5) iron(III) ISE has been assembled by individually wiring each solid-state sensor into a single electrode body. Furthermore, a dual metal ion buffer calibration standard incorporating copper(II) and iron(III) coordinating ligands to regulate the levels of free copper(II) and iron(III) in the buffer has been developed to enable simultaneous calibration of the bielectrode ISE array. In this work, the bielectrode ISE array has been employed in the continuous flow analysis (CFA) of free copper(II) and iron(III) in seawater media. It is shown that the individual electrodes displayed Nernstian response in the metal ion buffer calibration standard over a wide dynamic range (viz., 10⁻¹⁵ to 10⁻⁵ M aCu²⁺ and 10⁻²¹ to 10⁻¹¹ M aFe³⁺), and the results of repetitive CFA analyses of free copper(II) and iron(III) in seawater are commensurate with the typical values found in coastal seawater samples. Clearly, the bielectrode ISE array may be used in the simultaneous analysis of free copper(II) and iron(III) in seawater without fear of cross-interference between the solid-state sensors.     

Intervalence electron transfer spectra of several iron(III) and copper(II) pentacyanoferrate(II) complexes

The intervalence spectra of several iron(III) and copper(II) pentacyanoferrate(II) complexes have been studied in comparison to those of the hexacyanoferrate(II) analogs. The energies of the intervalence transitions have shown to be strongly dependent on the properties of the Fe(CN)₅Lⁿ⁻ anion. The observed trend on the energies of the intervalence bands in the sequence NH₃ < py < pyrazinecarboxylate < dimethyl sulfoxide ∼ tetramethylene sulfoxide < CO, for the ligand L, were interpreted in terms of backbonding stabilization of the low spin, iron(II) donor ion.     

Synthesis and crystal structure determination of copper(II) and iron(III) complexes of 2-(2-pyridyl)benzothiazole

Two complexes [Cu^II(pbt)(dmf)Cl₂] and [Fe^III(pbt)Cl₃], where pbt is 2-(2-pyridyl)benzothiazole, and dmf is dimethylformamide, were prepared by the reaction of metal chlorides with pbt solutions. The structures of the products were identified by elemental analysis, usual spectroscopic methods and X-ray diffraction analysis. The crystal data revealed penta-coordination around both metal ions, with trigonal bipyramidal geometries. 2-(2-pyridyl)benzothiazole binds to both Cu^II and Fe^III in the N,N-chelation manner and leaves the S atom uncoordinated.     

Iron(II)-8-mercaptoquinoline,iron(II)-5-chloro-8-mercaptoquino-line and iron(II)-5-bromo-8-mercaptoquinoline complexing in the iron(III) hexacyanoferrate(II) gelatin-immobilized matrix systems

Novel complexing processes in the Fe^II-8-mercaptoquinoline, Fe^II-5-chloro-8-mercaptoquinoline and Fe^II-5-bromo-8-mercaptoquinoline systems, not used previously in coordination chemistry, namely complexing as an iron(III)hexacyanoferrate(II) gelatin-immobilized matrix (GIM) in contact with an aqueous solution of the corresponding ligand, have been observed and analysed. Incorporation of these ligands into the inner coordination sphere is preceded by the decomposition of the immobilized compound KFe[Fe(CN)₆] to form hydroxides or oxohydroxides of Fe^II and Fe^III under the action of OH^- ions. It has been shown that Fe^IIFeIII redox process and the formation of FeB₃ chelates (B^- is a singly deprotonated form of the corresponding ligand) take place during complexing under such conditions.     

Spin transition in iron(III) and iron(II) complexes

The main stages of the studies on the spin transitions in iron(III) and iron(II) complexes are considered. The types of the spin transitions and the factors responsible for the latter are reported. The problems arising during experiments in this field are discussed.     

Synthesis and characterization of biacetyldihydrazone complexes of cobalt(II), copper(II), nickel(II) and iron(III)

Summary Biacetyldihydrazone (BdH) complexes [M(BdH)₃](ClO₄)₂ (M=Co^IIor Cu^II) and [M(BdH)₃](NO₃)_2,3 (M = Ni^IIor Fe^III) have been prepared and characterized by chemical analysis, conductance measurements, electronic, i.r. and e.p.r. spectral studies and magnetic subsceptibilities measurements. A mononuclear octahedral configuration is proposed for all complexes studied.     

Copper(II) and iron(III) complexes of N-nitroso-N- alkylhydroxylamines,and the X-ray crystal structures of bis(N-nitroso-N-isopropylhydroxylaminato)copper(II) and tris(N-nitroso-N-propylhydroxylaminato)iron(III)

N-nitroso-N-alkylhydroxylamines have been prepared by hydrolysis of the mixture obtained by reaction of nitric oxide with Grignard reagents, and stabilized as their copper(II) or iron(III) complexes, Cu(RN₂O₂)₂ and Fe(RN₂O₂)₃, where R is, for example, Me, Et, Prⁱ, Bu^iso, Ph, n-C₈H₁₇ or n-C₁₂H₂₅. The complexes have been characterized by analytical, magnetic and spectroscopic measurements. By single-crystal X-ray methods Cu(PrⁱN₂O₂)₂ has been found to be trans-planar and Fe(PrⁿN₂O₂)₃ has a facial octahedral structure; in each complex the NO bond lengths are equal with no significant variation between the copper and iron complexes.     

Preconcentration of iron (III), cobalt (II) and copper (II) nitroso-R complexes on tetradecyldimethylbenzylammonium iodide-naphthalene adsorbent

Iron, cobalt and copper form coloured water soluble anionic complexes with disodium 1-nitroso-2-naphthol-3-6-disulphonate (nitroso R-salt). The anionic complex is retained quantitatively as a water insoluble neutral ion associated complex (M-nitroso R-TDBA) on tetradecyldimethylbenzylammonium iodide on naphthalene (TDBA(+)I(-)-naphthalene) packed column in the pH range of: Fe(III): 3.1-6.5, Co: 3.4-8.5 and Cu 5.9-8.0 when their solutions are passed individually over this adsorbent at a flow rate of 0.5-5.0 ml/min. The solid mass consisting of an ion associated metal complex along with naphthalene is dissolved out of the column with 5 ml dimethylformamide/chloroform and metals are determined spectrophotometrically. The absorbance is measured at 710 nm for iron, 425 nm for cobalt and 480 nm for copper. Beers law is obeyed in the concentration range 9.2-82 mug of iron, 425 nm for cobalt cobalt and 3.0-62 mug of copper in 5 ml of final DMF/CHCl(3) solution. The molar absorptivities are calculated to be Fe: 7.58 x 10(3), Co: 1.33 x 10(4) and Cu: 4.92 x 10(4)M(-1)cm(-1). Ten replicate determinations containing 25 mug of iron, 9.96 mug of cobalt and 3.17 mug of copper gave mean absorbances 0.677, 0.450 and 0.490 with relative standard deviations of 0.88, 0.98 and 0.92%, respectively. The interference of large number of metals and anions on the estimations of these metals has been studied. The optimized conditions so developed have been employed for the trace determination of these metals in standard alloys, waste water and fly ash samples.     

Influence of sorption on the catalytic activity of iron(III) and copper(II) ions

An analysis is made of earlier work by the authors in investigating the catalytic activity of Fe(III) and Cu(II) ions in solution and on different surfaces in certain redox reactions: the decomposition of H₂O₂, oxidation of ascorbic acid, etc. General principles have been established which provide a means of predicting one or another action of sorption on the catalytic activity: if the reaction proceeds within the ion exchanger phase as in a homogeneous (concentrated) solution, it is most probable to have a decrease (or cessation) of the catalytic activities of the ions. If the ion catalysts are included in a surface complex in whose coordination sphere there are places which the substrate may occupy the reaction is facilitated. The analysis carried out of the influence of sorption on the catalytic activity of the iron and copper ions shows a favorable change in the catalytic activity for these ions during their sorption on different types of surfaces.Translated from Teoreticheskie i Éksperimental'naya Khimiya, Vol. 22, No. 6, pp. 706–711, November–December, 1986.     

The solid state electrochemistry of samarium (III) hexacyanoferrate (II)

A new electroactive polynuclear inorganic compound of a rare earth metal hexacyanoferrate, samarium hexacyanoferrate (SmHCF), was prepared chemically and characterized using techniques of FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction, UV–Vis spectrometry and X-ray photoelectron spectroscopy (XPS) etc. The cyclic voltammetric behavior of SmHCF mechanically attached to the surface of graphite electrode was well defined and exhibited a pair of redox peaks with the formal potential of 180.5 mV (versus SCE) at a scan rate of 100 mV/s in 0.2-M NaCl solution and the redox peak currents increased linearly with the square root of the scan rates up to as high as 1,000 mV/s. The effects of the concentration of supporting electrolyte on the electrochemical characteristics of SmHCF and the transport behavior of K⁺, Na⁺ and Li⁺ counter-ions through the ion channel of SmHCF were studied by voltammetry.