O3 and SO2 sensing concept on extended surface of B12N12 nanocages modified by Nickel decoration: A comprehensive DFT study

Adsorption of SO₂ and O₃ molecules on pristine boron nitride (B₁₂N₁₂) and Ni-decorated B₁₂N₁₂ nano-cages has been systemically investigated through density functional theory (DFT) methods. Adsorption energies (thermodynamics), bond distances, charge analysis, dipole moments, orbital analysis and density of states are calculated by van der Waals DFT method (MPW1PW91) functional. The adsorption energies of O₃ and SO₂ on pristine B₁₂N₁₂ are about −143.8 and −14.0 kJ mol⁻¹, respectively. The interaction energies of O₃ and SO₂ with pristine B₁₂N₁₂ are indicative of chemisorption and physisorption, respectively. Ni-decorated B₁₂N₁₂ (Ni@BN) enhances adsorption of both O₃ and SO₂ species. The interaction energies for adsorption of SO₂ are about −166 and −277 kJ mol⁻¹ whereas the corresponding energies for O₃ are −362 and −396 kJ mol⁻¹ for configuration A and B, respectively. These observations show that functionalized B₁₂N₁₂ are highly sensitive toward SO₂ and O₃ molecules.     

Temperature dependence vapour pressure measurements of Mg(tmhd)2(tmeda) [(tmhd = 2,2,6,6-tetramethyl-3,5-heptanedione, tmeda = N,N,N′,N′-tetramethylethylenediamine]

The reaction between the magnesium β-diketonate complex Mg(tmhd)₂(H₂O)₂ and 1 equiv. of N,N,N′,N′-tetramethylethylenediamine (tmeda = Me₂NCH₂CH₂NMe₂) in hexane at room temperature yielded Mg(tmhd)₂(tmeda). The standard enthalpy of sublimation (83.2 ± 2.3 kJ mol⁻¹) and entropy of sublimation (263 ± 6.3 J mol⁻¹ K⁻¹) of Mg(tmhd)₂(tmeda) were obtained from the temperature dependence vapour pressure, determined by adopting a horizontal dual arm single furnace thermogravimetric analyser as a transpiration apparatus. From the observed melting point depression DTA, the standard enthalpy of fusion (58.3 ± 5.2 kJ mol⁻¹) was evaluated, using the ideal eutectic behaviour of Mg(tmhd)₂(tmeda) as a solvent with bis(2,4-pentanedionato)magnesium(II), Mg(acac)₂ as a non-volatile solute.     

Si‐Doped B12N12 Nanocage as an Adsorbent for Dissociation of N2O to N2 Molecule

Adsorption of N₂O molecule by using density functional theory calculations at the B3LYP/6–31G* level onto pristine and Si‐doped B₁₂N₁₂ nanocage in terms of energetic, geometric, and electronic properties was investigated. The results of calculations showed that the N₂O molecule is physically adsorbed on the pristine and Si‐doped B₁₂N₁₂ (Si_N) models, releasing energies in the range of –1.13 to –2.02 kcal mol⁻¹. It was found that the electronic properties of the models have not changed significantly upon the N₂O adsorption. On the other hand, the adsorption energy of N₂O on the Si‐doped B₁₂N₁₂ (Si_B model) was about –67.20 kcal mol⁻¹and the natural bond orbital charge of 0.58|e| is transferred from the nanocage to the N₂O molecule. In the configuration, the O atom of N₂O molecule is bonded to the Si atom of the nanocage, so that an N₂ molecule escapes from the wall of the nanocage. The results showed that the Si_B model can be an adsorbent for dissociation of the N₂O molecule.     

How reliable is DFT in predicting relative energies of polycyclic aromatic hydrocarbon isomers? comparison of functionals from different rungs of jacob's ladder

Density functional theory (DFT) is the only quantum‐chemical avenue for calculating thermochemical/kinetic properties of large polycyclic aromatic hydrocarbons (PAHs) such as graphene nanoflakes. Using CCSD(T)/CBS PAH isomerization energies, we find that all generalized gradient approximation (GGA) and meta GGA DFT functionals have severe difficulties in describing isomerization energies in PAHs. The poor performance of these functionals is demonstrated by the following root‐mean‐square deviations (RMSDs) obtained for a database of C₁₄H₁₀ and C₁₈H₁₂ isomerization energies. The RMSDs for the GGAs range between 6.0 (BP86‐D3) and 23.0 (SOGGA11) and for the meta GGAs they range between 3.5 (MN12‐L) and 11.9 (τ‐HCTH) kJ mol⁻¹. These functionals (including the dispersion‐corrected methods) systematically and significantly underestimate the isomerization energies. A consequence of this behavior is that they all predict that chrysene (rather than triphenylene) is the most stable C₁₈H₁₂ isomer. A general improvement in performance is observed along the rungs of Jacob's Ladder; however, only a handful of functionals from rung four give good performance for PAH isomerization energies. These include functionals with high percentages (40–50%) of exact Hartree–Fock exchange such as the hybrid GGA SOGGA11‐X (RMSD = 1.7 kJ mol⁻¹) and the hybrid‐meta GGA BMK (RMSD = 1.3 kJ mol⁻¹). Alternatively, the inclusion of lower percentages (20–30%) of exact exchange in conjunction with an empirical dispersion correction results in good performance. For example, the hybrid GGA PBE0‐D3 attains an RMSD of 1.5 kJ mol⁻¹, and the hybrid‐meta GGAs PW6B95‐D3 and B1B95‐D3 result in RMSDs below 1 kJ mol⁻¹. © 2016 Wiley Periodicals, Inc.     

Viscometric studies on saccharides in aqueous magnesium chloride solutions at T = (288.15 to 318.15) K

The viscosity B-coefficients of mono-, di-, tri-saccharides and the derivatives (methyl glycosides) in m_B = (0.5, 1.0, 2.0, and 3.0) mol · kg⁻¹ aqueous solutions of magnesium chloride have been determined from viscosity data using the Jones–Dole equation at T = (288.15, 298.15, 308.15, and 318.15) K. The viscosity B-coefficients of transfer (Δ_tB), the temperature derivatives of B-coefficients (dB/dT), pair and triplet viscometric interaction coefficients (η_AB, η_ABB) have been determined. The viscosity B-coefficients data of systems studied in water have been reported earlier. The results have been interpreted in light of the solute–solute and solute–solvent interactions occurring in these systems. The comparison of results has been made with those reported in the presence of potassium chloride, ammonium sulphate, and sodium sulphate.     

The thermodynamic stability of P8, A CBS‐Q study

The thermodynamic stabilities of P₂, P₄, and three P₈ cage structure were investigated through high‐precision CBS‐Q calculations. The CBS‐Q values for the bond energy of P₂ (ΔE_o: +115.7 kcal mol⁻¹) and the formation of P₄ from P₂ (Δ E_o:‐56.6 kcal mol⁻¹) were in excellent agreement with the experimental values (E_o: +117 and ‐56.4 kcal mol⁻¹ respectively). Among the P₈ cages, the cubane structure was the least stable (Δ E_o +37 kcal vs. 2×P₄). The most stable P₈ isomer adopts a cuneane structure resembling S₄N₄, and is more stable than white phosphorus at T = 0 K (Δ E_o −3.3 kcal mol⁻¹), but still unstable under standard conditions for entropic reasons (Δ G^o of +8.1 kcal mol⁻¹ vs. 2×P₄). The CBS‐Q energies represent significant revisions (6–20 kcal mol⁻¹) of previous computational predictions obtained by high‐level single method calculations. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:453–457, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20119     

Molecular docking analysis and spectroscopic investigations of zinc(II), nickel(II) N-phthaloyl-β-alanine complexes for DNA binding: Evaluation of antibacterial and antitumor activities

Herein, computational molecular docking, UV/visible and fluorescence spectroscopic techniques have been used to explore the DNA binding interactions of N-phthaloyl-β-alanine (NPA) ligand and its Zn(II) and Ni(II) complexes (NPAZn, NPANi). The compounds were further tested for anti-bacterial and anti-tumor activities. Docking analysis depicted that ligand NPA interacted with DNA via intercalation, while its metal complexes showed mixed mode of interactions. Spectroscopic experiments for DNA binding studies were run under physiological conditions of pH (stomach; 4.7, blood; 7.4) and temperature (37 °C). Based on changes in spectral responses, binding parameters for all the compounds were obtained which showed comparatively greater binding constant values (K_b: UV; 1.16 × 10⁵ M⁻¹, Flu; 1.35 × 10⁵ M⁻¹) and more negative free energy changes (ΔG: UV; −30.00 kJ mol⁻¹, Flu; −30.44 kJ mol⁻¹) for NPAZn at pH 4.7. The overall, binding results were also found more significant at stomach pH. Dynamic “K_D” and bimolecular “K_B” constants were evaluated, and the values affirmed the participation of static process for each compound–DNA binding. The greater binding site size values (n > 1) of metal complexes NPAZn and NPANi indicated other sites availability of intercalative compounds. DNA viscosity variation by increasing compound’s concentration further verified the compound–DNA interaction. Antibacterial and tumor inhibitory activities were observed significant for both metal complexes, while ligand has shown no activity. The greater binding affinity of metal complexes, as evaluated both computationally and spectroscopically, further validated the lower IC50 values of complexes as compared to ligand.     

Calorimetric investigation of mixing enthalpy of liquid (Co + Cu + Zr) alloys at T = 1873 K

The enthalpies of mixing of liquid (Co + Cu + Zr) alloys have been determined using the high-temperature isoperibolic calorimeter. The measurements have been performed along three sections (x_Co/x_Cu = 3/1, 1/1, 1/3) with x_Zr = 0 to 0.55 at T = 1873 K. Over the investigated composition range, the partial mixing enthalpies of zirconium are negative. The limiting partial enthalpies of mixing of undercooled liquid zirconium in liquid (Co + Cu) alloys are (−138 ± 18) kJ · mol⁻¹ (the section x_Co/x_Cu = 3/1), (−155 ± 10) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/1), and (−130 ± 22) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/3). The integral mixing enthalpies are sign-changing. The isenthalpic curves have been plotted on the Gibbs triangle. The main features of the composition dependence of the integral mixing enthalpy of liquid ternary alloys are defined by the pair (Co + Zr) and (Cu + Zr) interactions.     

Preparation and characterization of novel organic chelating resin and its application in recovery of Zn(II) from aqueous solutions

An organic polymeric resin was synthesized by anchoring p ‐aminobenzoic acid onto macroporous chloromethylated polystyrene beads, and was used for Zn(II) removal from aqueous solutions. The resin exhibited an initially rapid adsorption property for Zn(II) with equilibrium time of 10 h and the maximum adsorption capability approached 184.5 mg g⁻¹. Optimum pH was 4.5. The mechanism of adsorption was investigated using kinetic, isotherm and thermodynamic models. The adsorption kinetic data were described well by a pseudo second‐order model with R ² of 0.997. There was a negative ΔG (−17.98 kJ mol⁻¹) and positive ΔH (13.58 kJ mol⁻¹). HCl solution (1.0 mol l⁻¹) could achieve an elution rate of 100%. The experimental data were well fitted by the Thomas model with R ² of 0.9826. Copyright © 2016 John Wiley & Sons, Ltd.     

Atmospheric chemistry of n‐CH3(CH2)xCN (x = 0–3): Kinetics and mechanisms

Smog chamber/Fourier transform infrared (FTIR) techniques were used to measure the kinetics of the reaction of n‐CH₃(CH₂)_xCN (x = 0–3) with Cl atoms and OH radicals: k(CH₃CN + Cl) = (1.04 ± 0.25) × 10⁻¹⁴, k(CH₃CH₂CN + Cl) = (9.20 ± 3.95) × 10⁻¹³, k(CH₃(CH₂)₂CN + Cl) = (2.03 ± 0.23) × 10⁻¹¹, k(CH₃(CH₂)₃CN + Cl) = (6.70 ± 0.67) × 10⁻¹¹, k(CH₃CN + OH) = (4.07 ± 1.21) × 10⁻¹⁴, k(CH₃CH₂CN + OH) = (1.24 ± 0.27) × 10⁻¹³, k(CH₃(CH₂)₂CN + OH) = (4.63 ± 0.99) × 10⁻¹³, and k(CH₃(CH₂)₃CN + OH) = (1.58 ± 0.38) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ at a total pressure of 700 Torr of air or N₂ diluents at 296 ± 2 K. The atmospheric oxidation of alkyl nitriles proceeds through hydrogen abstraction leading to several carbonyl containing primary oxidation products. HC(O)CN, NCC(O)OONO₂, ClC(O)OONO₂, and HCN were identified as the main oxidation products from CH₃CN, whereas CH₃CH₂CN gives the products HC(O)CN, CH₃C(O)CN, NCC(O)OONO₂, and HCN. The oxidation of n‐CH₃(CH₂)_xCN (x = 2–3) leads to a range of oxygenated primary products. Based on the measured OH radical rate constants, the atmospheric lifetimes of n‐CH₃(CH₂)_xCN (x = 0–3) were estimated to be 284, 93, 25, and 7 days for x = 0,1, 2, and 3, respectively.     

Energetic Ordering of Hydrogen Bond Strengths in Methanol-Water Clusters: Insights via Molecular Tailoring Approach

In this work, we examine the strength of various types of individual hydrogen bond (HB) in mixed methanol-water M_nW_m, (n+m=2 to 7) clusters, with an aim to understand the relative order of their strength, using our recently proposed molecular tailoring-based approach (MTA). Among all the types of HB, it is observed that the O_M−H…O_W HBs are the strongest (6.9 to 12.4 kcal mol⁻¹). The next ones are O_M−H…O_M HBs (6.5 to 11.6 kcal mol⁻¹). The O_W−H…O_W (0.2 to 10.9 kcal mol⁻¹) and O_W−H…O_M HBs (0.3 to 10.3 kcal mol⁻¹) are the weakest ones. This energetic ordering of HBs is seen to be different from the respective HB energies in the dimer i. e., O_M−H…O_M (5.0 to 6.0 kcal mol⁻¹)>O_W−H…O_M (1.5 to 6.0 kcal mol⁻¹)>O_M−H…O_W (3.8 to 5.6 kcal mol⁻¹)>O_W−H…O_W (1.2 to 5.0 kcal mol⁻¹). The plausible reason for the difference in the HB energy ordering may be attributed to the increase or decrease in HB strengths due to the formation of cooperative or anti-cooperative HB networks. For instance, the cooperativity contribution towards the different types of HB follows: O_M−H…O_W (2.4 to 8.6 kcal mol⁻¹)>O_M−H…O_M (1.3 to 6.3 kcal mol⁻¹)>O_W−H…O_W (−1.0 to 6.5 kcal mol⁻¹)>O_W−H…O_M (−1.2 to 5.3 kcal mol⁻¹). This ordering of cooperativity contribution is similar to the HB energy ordering obtained by the MTA-based method. It is emphasized here that, the interplay between the cooperative and anti-cooperative contributions are indispensable for the correct energetic ordering of these HBs.     

Thermal decomposition of N2O near 900 K studied by FTIR spectrometry: Comparison of experimental and theoretical O(3P) formation kinetics

The spin-forbidden dissociation reaction of the N₂O(X¹Σ⁺) ground state has been investigated by both quantum calculations and experiments. Ab initio prediction at the CCSD(T)/CBS(TQ5)//CCSD(T)/aug-cc-pVTZ+d level of theory gave the crossing point (MSX) energy at 60.1 kcal/mol for the N₂O(X¹Σ⁺) → N₂() + O(³P) transition, in good agreement with published data. The T- and P-dependent rate coefficients, k₁(T,P), for the nonadiabatic thermal dissociation predicted by nonadiabatic Rice-Ramsperger-Kassel-Marcus (RRKM) calculations agree very well with literature data. The rate constants at the high- and low-pressure limits, k₁^∞ = 10^11.90 exp (−61.54 kcal mol⁻¹/RT) s⁻¹ and k₁^o = 10^14.97 exp(−60.05 kcal mol⁻¹/RT) cm³ mol⁻¹ s⁻¹, for example, agree closely with the extrapolated results of Röhrig et al. at both pressure limits. The second-order rate constant (k₁^o) is also in excellent agreement with our result measured by FTIR spectrometry in the present study for the temperature range of 860-1023 K as well as with many existing high-temperature data obtained primarily by shock-wave heating up to 3340 K. Kinetic modeling of the NO product yields measured at long reaction times in the present work also allowed us to reliably estimate the rate constant for reaction (3), O + N₂O → N₂ + O₂, based on its strong competition with the NO formation from reaction (2) which has been better established. The modeled values of k₃ confirmed the previous finding by Davidson et al. with significantly smaller values of A-factor and activation energy than the accepted ones. A least-squares analysis of both sets of data gave k₃ = 10^{12.22 ± 0.04} exp[− (11.65 ± 0.24 kcal mol⁻¹/RT)] cm³ mol⁻¹ s⁻¹, covering the wide temperature range of 988-3340 K.     

Buffer standards for the physiological pH of N-[2-hydroxy-1,1-bis(hydroxymethyl)ethyl]glycine (TRICINE) from T = (278.15 to 328.15) K

The pH values of two buffer solutions without NaCl and seven buffer solutions with added NaCl, having ionic strengths (I = 0.16 mol · kg⁻¹) similar to those of physiological fluids, have been evaluated at 12 temperatures from T = (278.15 to 328.15) K by way of the extended form of the Debye–Hückel equation of the Bates–Guggenheim convention. The residual liquid junction potentials (δE_j) between the buffer solutions of TRICINE and saturated KCl solution of the calomel electrode at T = (298.15 and 310.15) K have been estimated by measurement with a flowing junction cell. For the buffer solutions with the molality of TRICINE(m₁) = 0.06 mol · kg⁻¹, NaTRICINE(m₂) = 0.02 mol · kg⁻¹, and NaCl(m₃) = 0.14 mol · kg⁻¹, the pH values at T = 310.15 K obtained from the extended Debye–Hückel equation and the inclusion of the liquid junction correction are 7.342 and 7.342, respectively. These are in excellent agreement. The zwitterionic buffer TRICINE is recommended as a secondary pH standard in the region for clinical application.     

Effect of hydrolysis on the diffusion of ferric sulphate in aqueous solutions at T = 298.15 K

Diffusion coefficients of the Fe₂(SO₄)₃)/water system at T = 298.15 K and at concentrations between 0.050 mol · dm⁻³ and 0.200 mol · dm⁻³ have been measured, using a conductimetric cell and an automatic apparatus to follow diffusion. The cell uses an open-ended capillary method. A conductimetric technique is used to follow the diffusion process by measuring the resistance of a solution inside the capillaries at recorded times. These data are discussed on the basis of the Onsager–Fuoss model. The diffusion of Fe₂(SO₄)₃ is clearly affected by the Fe (III) hydrolysis. These data permit us to have a better understanding of the structure of such systems and the thermodynamic behaviour of ferric sulphate in different media.     

Speeds of sound in {(1 − x)CH4 + xN2} with x = (0.10001, 0.19999, and 0.5422) at temperatures between 170 K and 400 K and pressures up to 30 MPa

The speed of sound in {(1 − x)CH₄ + xN₂} has been measured with a spherical acoustic resonator. Two mixtures with x = (0.10001 and 0.19999) were studied along isotherms at temperatures between 220 K and 400 K with pressures up to 20 MPa; a few additional measurements at p = (25 and 30) MPa are also reported. A third mixture with x = 0.5422 was studied along pseudo-isochores at amount-of-substance densities between 0.2 mol · dm⁻³ and 5 mol · dm⁻³. Corrections for molecular vibrational relaxation are discussed in detail and relaxation times are reported. The overall uncertainty of the measured speeds of sound is estimated to be not worse than ±0.02%, except for those measurements in the mixture with x = 0.5422 that lie along the pseduo-isochore at the highest amount-of-substance density. The results have been compared with the predictions of several equations of state used for natural gas systems.     

Synthesis and thermal decomposition behavior of nitrogen- and oxygen-rich energetic material N-trinitromethyl-4,5-dicyano-2H-1,2,3-triazole

N-trinitromethyl-4,5-dicyano-2H-1,2,3-triazole was readily synthesized from 4,5-dicyano-2H-1,2,3-triazole. Its crystal structure was obtained for the first time and its crystalline density in 296 K was 1.729 g cm⁻³. It shows high nitrogen and oxygen content up to 77.6%, high calculated solid heat of formation (564 kJ mol⁻¹), and superior detonation pressure and detonation velocity (D = 8619 m s⁻¹, P = 30.8 GPa). This new hydrogen-absent explosive shows high impact and friction sensitivities (IS: 1.25 J, FS: 32 N), which is lower than commercial primary explosive 2-diazonium-4,6-dinitrophenol (DDNP) (IS: 1 J, FS: 5 N). The relationship between intermolecular interaction and sensitivity as well as thermal stability of the title compound was investigated by Hirshfeld surface analysis and fingerprint plot. Its thermodynamic properties were studied by non-isothermal kinetic methods based on the results of differential scanning calorimeter. It is interesting that apparent activation energy (E_a) at T_p1 (210.89–214.17 kJ mol⁻¹) is higher than those at T_p2 (133.90–134.87 kJ mol⁻¹). In addition, gaseous product of this new energetic compound was analyzed by the rapid scanning Fourier transform infrared spectroscopy from 20 to 200 °C and its detonation products was theoretically predicted. Based on the decomposition products, its decomposition mechanism was discussed under inert atmosphere. It is undoubted that these significant physicochemical properties make N-trinitromethyl-4,5-dicyano-2H-1,2,3-triazole a potential hydrogen-absent primary explosive.

     

Investigation of isothermal and dynamic cure kinetics of epoxy resin/nadic methyl anhydride/dicyandiamide by differential scanning calorimetry (DSC)

Isothermal and dynamic differential scanning calorimetry (DSC) was exploited to study the curing behavior of diglycidyl ether bisphenol-A epoxy resin with various combining ratios of dicyandiamide (DICY) and nadic methyl anhydride (NMA). Curves of prepared samples indicated that the enthalpy of the reaction decreased with increasing the molar ratios (NMA/DICY) up to 40% after which an exothermic peak peculiar to the effect of anhydride appeared at a higher temperature. The curing behavior examination of the samples containing the aforementioned molar ratio of NMA/DICY (= 40%) was carried out using isothermal condition at different temperatures (130–145 °C) and dynamic condition DSC at various heating rates (2.5–20 °C min⁻¹). Under the isothermal condition, by constructing a master curve, the values of activation energy (E_a) and pre-exponential factor (A) were calculated 89.3 kJ mol⁻¹ and 1.2 × 10⁺⁹ s⁻¹, respectively. The activation energy of the curing reactions in a dynamic mode was obtained 85.32 kJ mol⁻¹ and 88.02 kJ mol⁻¹ using Kissinger and Ozawa methods, respectively. Likewise, pre-exponential factors were also calculated 3.35 × 10⁺⁸ and 7.4 × 10 ⁺⁸ s⁻¹, respectively. The overall order of reaction for both conditions was found to be a value around 3.

     

Calorimetric determination of enthalpy changes for the proton ionization of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) in water-methanol mixtures

Enthalpies for the two proton ionizations of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol the ionization enthalpy for the first proton (ΔH₁) of glycine increased from 4.4 to 9.4 kJ mol⁻¹ with a minimum of 4.1 kJ mol⁻¹ at X_m = 0.059. The ionization enthalpy of the second proton (ΔH₂) for glycine decreased from 46.3 to 38.1 kJ mol⁻¹. ΔH₁ of bicine increased from 3.5 to 7.6 kJ mol⁻¹ at X_m = 0.273 before dropping to 4.1 kJ mol⁻¹ at X_m = 0.360. ΔH₂ of bicine increased from 24.9 to 29.4 kJ mol⁻¹. For tricine, ΔH₁ increased from 6.7 to 9.8 kJ mol⁻¹ at X_m = 0.194 then dropped to 7.4 kJ mol⁻¹ at X_m = 0.360. ΔH₂ for tricine first dropped from 30.8 to 28.5 kJ mol⁻¹ at X_m = 0.059 before increasing to 33.3 kJ mol⁻¹ at X_m = 0.273. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

The kinetics and mechanisms of gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

2‐Phenylethanol, racemic 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol have been pyrolyzed in a static system over the temperature range 449.3–490.6°C and pressure range 65–198 torr. The decomposition reactions of these alcohols in seasoned vessels are homogeneous, unimolecular, and follow a first‐order rate law. The Arrhenius equations for the overall decomposition and partial rates of products formation were found as follows: for 2‐phenylethanol, overall rate log k₁(s⁻¹)=12.43−228.1 kJ mol⁻¹ (2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.97−249.2 kJ mol⁻¹ (2.303 RT)⁻¹, styrene formation log k₁(s⁻¹)=12.40−229.2 kJ mol⁻¹(2.303 RT)⁻¹, ethylbenzene formation log k₁(s⁻¹)=12.96−253.2 kJ mol⁻¹(2.303 RT)⁻¹; for 1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=13.03−233.5 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=13.04−240.1 kJ mol⁻¹(2.303 RT)⁻¹, unsaturated hydrocarbons+indene formation log k₁(s⁻¹)=12.19−224.3 kJ mol⁻¹(2.303 RT)⁻¹; for 2‐methyl‐1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=12.68−222.1 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.65−222.9 kJ mol⁻¹(2.303 RT)⁻¹, phenylpropenes formation log k₁(s⁻¹)=12.27−226.2 kJ mol⁻¹(2.303 RT)⁻¹. The overall decomposition rates of the 2‐hydroxyalkylbenzenes show a small but significant increase from primary to tertiary alcohol reactant. Two competitive eliminations are shown by each of the substrates: the dehydration process tends to decrease in relative importance from the primary to the tertiary alcohol substrate, while toluene formation increases. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 401–407, 1999     

Buffer standards for the physiological pH of the zwitterionic compound of 3-(N-morpholino)propanesulfonic acid (MOPS) from T = (278.15 to 328.15) K

This paper reports the pH values of five NaCl-free buffer solutions and 11 buffer compositions containing NaCl at I = 0.16 mol · kg⁻¹. Conventional pa_H values are reported for 16 buffer solutions with and without NaCl salt. The operational pH values have been calculated for five buffer solutions and are recommended as pH standards at T = (298.15 and 310.15) K after correcting the liquid junction potentials. For buffer solutions with the composition m₁ = 0.04 mol · kg⁻¹, m₂ = 0.08 mol · kg⁻¹, m₃ = 0.08 mol · kg⁻¹ at I = 0.16 mol · kg⁻¹, the pH at 310.15 K is 7.269, which is close to 7.407, the pH of blood serum. It is recommended as a pH standard for biological specimens.