Zn–TiO2 composite films prepared by pulsed electrodeposition

The preparation of a Zn–TiO₂ composite film has been performed by pulsed electrodeposition, from acidic zinc sulphate solutions, on an Fe support. The influence of the bath pH and the presence of a cationic surfactant (CTAB) on the composites structural and morphological characteristics has been investigated. The characterization of the samples was made by X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDS) and atomic force microscopy (AFM). The experimental data show that for the composites prepared at pH 2, the metallic matrix presents a (0 0 2) preferential orientation. At pH=4, the deposit loses the preferred c-axis orientation and in addition a higher content of TiO₂ particles is obtained. The use of the surfactant modifies the shape of the metallic grains, but little effect is observed on the dispersion of the semiconductor particles.     

Carbon nanofiber–copper composite powder prepared by electrodeposition

Carbon nanofiber–copper composite powder is prepared by an electrodeposition process using a copper plating bath containing homogeneously dispersed carbon nanofibers. Particles of the composite with a spiky ball structure are accumulated on the plating electrode during the initial stage of electroplating, and can be separated easily to give a powder carbon nanofiber–copper composite. The particle size can be controlled by selecting appropriate electroplating conditions.     

Photocatalytic activity of TiO2 films prepared by sol–gel and electrodeposition on the decolourization of monoazo dyes

Journal of Sol-Gel Science and Technology - TiO2 films were prepared effectively using titanium tetraisopropoxide sol by simple electrodeposition technique on conductive indium tin oxide plates...     

Synthesis of L10 Fe–Pd films by electrodeposition and thermal annealing

Fe–Pd alloy films have been prepared by electrochemical deposition from an alkaline electrolyte containing Fe sulfate, Pd chloride and 5-sulfosalicylic acid onto polycrystalline titanium substrates. The as-deposited films were nanocrystalline and magnetically soft (coercivity ∼ 25 Oe). L1₀ Fe–Pd films with a (1 1 1) preferred orientation were obtained by post-deposition thermal annealing of films with composition about 37 at% Fe in an (Ar + 5% H₂) gas flow at 500 °C. Such films exhibit hard magnetic properties, with a coercivity up to 1880 Oe, and a slightly anisotropic magnetic response, with a larger in-plane remanence. Preliminary magnetic investigations support magnetization switching through pinning of domain walls.     

Synthesis of thin Cu–Zn–Sn–S films for solar batteries by one-stage electrodeposition followed by annealing in a reactive atmosphere

1. Download : Download full-size image

     

High-k titanium–aluminum oxide dielectric films prepared by inorganic–organic hybrid solution

In this paper, high-k titanium–aluminum oxide (ATO) dielectric film has been realized by using organic–inorganic hybrid precursor solution. X-ray diffraction pattern revealed that the ATO films (Ti content less than 67 at%) remain amorphous phase for annealing treatment at 400 °C. And all of the amorphous ATO films had very smooth and uniform surface with root mean square (RMS) roughness of less than 0.5 nm. Meanwhile, the results showed that the ATO film (Ti:Al = 1:8) had the best performance, including RMS roughness of 0.33 nm, relative permittivity of 15, and leakage current density of 1.41 × 10^?6 A/cm² at 1 MV/cm.     

Antibacterial glass films prepared on metal surfaces by sol–gel method

This paper describes the preparation and characterization of glass films consisting of SiO₂, Li₂O, Na₂O, K₂O or MgO in varying compositions on stainless steel and aluminum substrates by sol–gel method. Silver phosphate or silver incorporated zeolite was also introduced into the sols for obtaining antibacterial effect. The SiO₂/Li₂O/Na₂O system having the composition of 85:5:10 wt% was found as the optimum for obtaining a stable sol and film formation. The films were investigated by scanning electron microscopy (SEM) and electron dispersive analysis by X-ray (EDX), Fourier transformed infrared (FTIR) spectroscopy, thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA). Homogenous films having 300 ± 20 nm thicknesses were formed by spin coating and then by curing at 500 °C for 1 h. Obtained films had high adherence to the metal substrates and they were also durable in acidic, basic or NaCl environments. They also presented a powerful antibacterial effect against E. coli.     

Pulsed current electrodeposition of Zn–Ag2S/TiO2 nanocomposite films as potential photoelectrodes

Nanocomposite Zn–Ag₂S/TiO₂ and Zn–TiO₂ films were prepared by pulsed current electrolysis from acidic zinc sulphate solutions on a titanium substrate. The influence of the nanoparticles' nature on the structural and morphological characteristics of the metallic electrodeposit was also investigated. The electrodeposits were characterized by X-ray diffraction and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. Using transmission electron microscopy, it was possible to conclude that the chemical treatment applied to the commercial TiO₂ particles promotes the formation of Ag₂S/TiO₂ composite nanoparticles, with Ti, Ag, S and O in its composition. This was also was confirmed by X-ray fluorescence spectrometry. These particles absorb visible light radiation which makes them promising materials for photoelectrocatalytic processes. Moreover, the modification in nanoparticle composition plays a remarkable influence on the coating morphology and Zn crystallite size. When TiO₂ is added, a change of Zn texture was observed along with a decrease in crystallite size. In contrast, the metal matrix nanocomposites prepared with Ag₂S/TiO₂ exhibit a spongy Zn morphology with a lower average Zn crystallite size. The nanocomposite films were tested in the photoelectrodegradation of ibuprofen and the best results were obtained for Zn–Ag₂S/ TiO₂ photoelectrodes.     

Microstructure and performance of AZO thin films prepared by sol–gel processing

Al-doped zinc oxide (AZO) films were prepared by a wet-chemical coating technique, their microstructure and crystal growth were characterized as a function of the single layer thickness. When similar final thicknesses are attained by more multiple subsequent coating-firing cycles, film porosity is reduced from over 14 to 2 %. Simultaneously the AZO crystallite size is increased from approximately 23 to 60 nm, a preferential c-axis oriented growth is observed. Different substrates (soda-lime glass, soda-lime glass with a SiO₂ barrier coating, borosilicate glass and alkali-free display glass) were used and the resulting AZO films were compared. It is found that the substrate composition primarily affects grain growth and subsequently the electrical performance of the AZO films.     

Photo-assisted electrodeposition of sol–gel films on p-type semiconductors

A new approach for the deposition of sol–gel films on semiconducting substrate using photo-electrochemical technique is presented. The deposition is based on accelerating sol–gel condensation reaction by the catalyzing effect of electrochemically generated OH⁻ ions when applying both negative potentials and light irradiation onto p-type semiconductors. Results show that both the negative shift in potential and the increase in light intensity facilitate the deposition kinetics of silica sol–gel films. Surface patterning is further achieved with the assistance of a laser.     

Pulsed electrodeposition of WO3–TiO2 composite films

Cathodic electrodeposition was used to prepare thin films of WO₃ and TiO₂ on F-doped SnO₂ glass substrates. A new pulsed deposition technique was developed to prepare WO₃–TiO₂ composite films over a wide compositional range. Such composite films containing comparable amounts of WO₃ and TiO₂ showed superior photoelectrochemical performance in 0.1 M Na₂SO₄ relative to the component oxides themselves.     

A multiscale structural study of nanoparticle films prepared by the Langmuir–Blodgett technique

Arrays of magnetic nanoparticles (NPs) represent a very interesting challenge toward the development of new devices for magnetic applications such as data storage and spintronic. The final properties of such assemblies depending essentially on the spatial arrangement of NPs, it is of first importance to investigate precisely their structure. Here, the structure of monolayer and multilayer films of magnetic iron oxide NPs assembled by the Langmuir–Blodgett (LB) technique has been studied by usual techniques such as SEM, AFM and ellipsometry and by a new and an easy to process enhanced optical technique: the Surface Enhancement Ellipsometry Contrast (SEEC) microscopy. This technique is based on the use of a new generation of microscope slides used as substrates which allow the strong enhancement of the sample contrast to a point where it becomes possible to visualize the structure of monolayer and multilayer films at the nanoscale with a conventional optical microscope. The SEEC microscopy is demonstrated to be complementary to usual characterization techniques to study the structure of NPs films, especially for films containing very small nanosized NPs which are more difficult to analyze by usual techniques. While the film structure is investigated with lateral resolution of microns, the layer thickness is analyzed at the nanoscale (with a precision of 0.3 nm) with a close fit to the experimental measurements on local (AFM) and on larger (ellipsometry) areas. This technique presents the advantage to visualize directly the topography of NPs assemblies on very large areas by extracting information such as the height profile, the film roughness and generating 3D images.     

High transparent thermal curable hybrid polycarbonate films prepared by the sol–gel method

Polycarbonate/epoxy/silica hybrid films were prepared by curing an epoxy reaction via in situ sol–gel process. The influence of the synthetic conditions, such as the ratio of different epoxy reagents and the contents of [2-(3,4-epoxycyclohexyl)ethyl]trimethoxysilane on the physical and optical properties of these hybrid films were investigated in details. The coefficient of thermal expansion, surface roughness, and light transmittance at a wavelength range from 250 to 800 nm were measured. These excellent overall performances make it a promising photonic packaging material.     

Studying structural,morphological and optical properties of nanocrystalline ZnO:Ag films prepared by sol–gel method for antimicrobial activity

Pure and Ag-doped zinc oxide sol–gel thin films were prepared by spin-coating process. Pure and Ag–ZnO films, containing 2–8% Ag, were annealed at 500?°C for 2?h. All thin films were prepared and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV–visible spectroscopy. X-ray diffraction studies show the polycrystalline nature with hexagonal wurtzite structure of ZnO and Ag:ZnO thin films. The crystallite size of the prepared samples reduced with increasing Ag doping concentrations. AFM and SEM results indicated that the average crystallite size decreased as Ag doping concentration increased. The transmittance spectra were then recorded at wavelengths ranging from 300 to 1000?nm. The films produced yielded high transmission at visible regions. The optical band gap energy of spin-coated films also decreased as Ag doping concentration increased. In particular, their optical band gap energies were 3.75, 3.55, 3.4, 3.3, and 3.23?eV at 0%, 2%, 4%, 6%, and 8%, respectively. Antibacterial activity of pure and Ag-doped zinc oxide against Escherichia coli and Staphylococcus aureus was evaluated by international recognized test (JIS Z 2801). The results showed that pure and Ag-doped ZnO thin film has an antibacterial inhibition zone against E. coli and S. aureus. Gram-positive bacteria seemed to be more resistant to pure and Ag-doped ZnO thin film than gram-negative bacteria. The test shows incrementally increasing in antibacterial activity of the thin films when dopant ratio increased under UV light.

Open image in new window

     

Modification of surface morphology and lattice order in nanocrystalline ZnO thin films prepared by spin-coating sol–gel method

Journal of Sol-Gel Science and Technology - Halloysite Nanotubes (HNTs) with large surface/volume ratio and rich reactive groups are incorporated into Fe-based MOF aerogel to develop MOF(Fe)/HNTs...