金电极表面植物原生质体的固定化

近年来 ,基于聚电解质同携带相反电荷的基团之间的静电吸引作用组装超薄复合膜的研究受到广泛的关注 [1～ 7] .但是 ,利用聚电解质来固定生物活细胞的研究尚不多见 .Wen等 [8]曾在水溶液中利用聚电解质复合物构成的微囊来固定人体肿瘤活细胞 .本文将该技术应用于生物活细胞在电极表面的固定化 .利用吸附在金电极上的荷正电的聚二烯丙基二甲基氯化铵 [Poly( diallyldimethylammoniumchloride) ,PDADMAC]将携带负电荷的大麦细胞固定在金电极表面 ,运用扫描隧道显微镜 ( STM)、石英晶体微天平 ( QCM)及共焦激光扫描荧光显微镜对该过程进…     

Direct electrodeposition of gold nanoparticles onto indium/tin oxide film coated glass and its application for electrochemical biosensor

A novel electrochemical deposition method for growth of gold nanoparticles (GNPs) on indium tin oxide (ITO) thin film coated glass was investigated. The resulting electrode surface was characterized by SEM, UV–Vis spectroscopy and electrochemical methods. The GNPs directly attached on the electrode surface with a quasi-spherical shape and their sizes of diameters were in the range of 20–35 nm with a quite symmetric distribution. With increasing electrodeposition cycles of cyclic voltammetry, the density of GNPs on ITO electrode surface was increased. The potential utility of the GNPs modified ITO electrode was investigated. Superoxide dismutase (SOD) was successfully immobilized on GNPs modified ITO electrode and the direct electron transfer between enzyme and electrode surface realized. The enzyme electrode exhibited a rapid and high response to superoxide anion.     

Fabrication of layer-by-layer modified multilayer films containing choline and gold nanoparticles and its sensing application for electrochemical determination of dopamine and uric acid

A novel electrochemical sensor has been constructed by use of a glassy carbon electrode (GCE) coated with a gold nanoparticle/choline (GNP/Ch). Electrochemical impedance spectroscopy (EIS), field emission scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the properties of this modified electrode. It was demonstrated that choline was covalently bounded on the surface of glassy carbon electrode, and deposited gold nanoparticles with average size of about 100 nm uniformly distributed on the surface of Ch. Moreover, the modified electrode exhibits strong electrochemical catalytic activity toward the oxidation of dopamine (DA), ascorbic acid (AA) and uric acid (UA) with obviously reduction of overpotentials. For the ternary mixture containing DA, AA and UA, these three compounds can be well separated from each other, allowing simultaneously determination of DA and UA under coexistence of AA. The proposed method can be applied to detect DA and UA in real samples with satisfactory results.     

The fabrication of a colloidal gold-carbon nanotubes composite film on a gold electrode and its application for the determination of cytochrome c

Colloid Au (Au_nano) with a diameter of about 20 nm was prepared and used in combination with the multi-wall carbon nanotubes (MWNTs) to modify a gold electrode. Dihexadecylphosphate (DHP) dispersed in Au_nano aqueous solution was used to solubilize MWNTs. Deposition of Au_nano on MWNTs was realized as illustrated by TEM micrographs. The DHP formed a network that connected Au_nano and MWNTs to the gold electrode surface. The Au_nano–MWNTs–DHP composite film on the gold electrode surface was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammmetry (CV). The composite film modified gold electrode was used to detect cytochrome c and a pair of well-defined redox waves was obtained. It was found that the composite film promoted the redox of horse heart cytochrome c and its effect was developed for the determination of cytochrome c.     

Electrocatalytic Properties of a Gold Nanoseed Particle‐modified Indium Tin Oxide Electrode: Comparison of the Shape and Preparation Methods

Gold nanostructures are the most commonly used nanostructures for fabricating electrochemical sensors and biosensors. In this study, we compared the catalytic performances of three types of gold nanoseed particles having two different morphologies, upon attachment to an amino‐functionalized ITO electrode surface. The ITO electrode surface was modified with 3‐aminopropyltrimethoxysilane (APTMS) and (1) gold nanoseed spheres (AuNSS), prepared using the ion capture and successive reduction method (ICR), (2) commercially available 5 nm AuNSS, and (3) a newly synthesized gold nanoseed wire (AuNSW). The electrocatalytic properties of the three electrodes were evaluated. Among the three electrodes, the AuNSW/APTMS/ITO was found to be the electrode of choice and exhibited excellent electrocatalytic properties toward the biologically important analytes glucose, uric acid, and serotonin.     

Lack of nano size effect on electrochemistry of dopamine at a gold nanoparticle modified indium tin oxide electrode

Nanometer sized materials have been shown to possess excellent chemical and electrochemical catalytic properties. In this work, a gold nanoparticle (AuNP) modified indium tin oxide (ITO) electrode was employed for investigating its electro-catalytic property. AuNP was deposited on the 3-aminopropyltriethoxysilane (APTES) modified ITO electrode by self-assembly, and was characterized by scanning electron microscopy and cyclic voltammetry. Although the electrochemical reaction of dopamine was very sluggish on the ITO/APTES electrode, it was significantly enhanced after AuNP deposition. The cyclic voltammogram exhibited apparent dependence on the surface coverage of 11 nm AuNPs, which could be rationalized by different modes of mass diffusion. Among the different sizes of AuNP investigated, the lowest anodic peak potential was observed on 11 nm AuNP. However, the potential was still about 50 mV more positive than that obtained on a bulk gold electrode of similar geometry. It is therefore concluded that there is no nanometer size effect of AuNP modified ITO on the electrochemistry of dopamine.     

Fabrication of a gold microelectrode for amperometric detection on a polycarbonate electrophoresis chip by photodirected electroless plating

A novel method of photoresist-free micropatterning coupled with electroless gold plating is described for the fabrication of an integrated gold electrode for electrochemical detection (ED) on a polycarbonate (PC) electrophoresis microchip. The microelectrode layout was photochemically patterned onto the surface of a PC plate by selective exposure of the surface coated without photoresist to 254 nm UV light through a chromium/quartz photomask. Thus, the PC plate was selectively sensitized by formation of reactive chemical moieties in the exposed areas. After a series of wet chemistry reactions, the UV-exposed area was activated with a layer of gold nanoparticles that served as a seed to catalyze the electroless plating. The gold microelectrode was then selectively plated onto the activated area by using an electroless gold plating bath. Nonselective gold deposition on the unwanted areas was eliminated by sonication of the activated PC plate in a KSCN solution before electroless plating, and the adhesion of the plated electrodes to the PC surface was strengthened with thermal annealing. Compared with the previously reported electroless plating technique for fabrication of microelectrodes on a microchip, the present method avoided the use of a membrane stencil with an electrode pattern to restrict the area to be wet-chemically sensitized. The CE with integrated ED (CE-ED) microchip was assembled by thermal bonding an electrode-plated PC cover plate to a microchannel-embossed PC substrate. The novel method allows one to fabricate low-cost, electrode-integrated, complete PC CE-ED chips with no need of a clean room. The fabricated CE-ED microchip was demonstrated for separation and detection of model analytes, including dopamine (DA) and catechol (CA). Detection limits of 0.65 and 1.03 microM were achieved for DA and CA, respectively, and theoretical plate number of 1.4 x 10(4) was obtained for DA. The plated gold electrode can be used for about 4 h, bearing usually more than 100 runs before complete failure.     

维生素B_1自组装膜修饰金电极对多巴胺、尿酸的电催化作用

用维生素B1(VB1)在金电极上进行自组装,制备了VB1自组装膜修饰金电极(VB1-Au/SAMs/CME).利用循环伏安法初步研究了此自组装单分子膜修饰电极的电化学行为.结果表明: VB1在金电极表面具有特性吸附.以\3-/ 4-氧化还原电对为探针,考察了VB1自组装膜修饰金电极的电化学性质, VB1自组装膜的存在对\3-/4-的电子转移具有明显的阻碍作用.研究了多巴胺(DA)和尿酸(UA)在此电极上的电化学行为.实验结果表明, DA和UA在此电极上均可被电催化氧化.差分脉冲伏安(DPV)氧化峰电流与DA浓度在2.0×10-5～4.0×10-4 mol/L范围内呈线性关系;测定UA的线性范围为6.0×10-5～2.2×10-4 mol/L,而且可实现这两种物质的同时测定.     

Nanostructured gold colloid electrode based on in situ functionalized self-assembled monolayers on gold electrode

A novel method for fabricating nanostructured gold colloid electrode based on in situ functionalization of self-assembled monolayers (SAMs) of 4-aminothiophenol (4-ATP) on gold electrode is proposed. The in situ functionalization of 4-ATP SAMs yields a redox active monolayer of 4′-mercapto-N-phenylquinone diimine (NPQD). When the amino-rich surface is exposed to gold colloid, the citrate-stabilized gold nanoparticles (GNPs) can be anchored onto the surface of the in situ functionalized electrode by the electrostatic interactions and a new nanostructured gold colloid surface was obtained. The mixed monolayers of in situ functionalized product, NPQD, and 1,4-benzenedimethanethiol (BDMT) can provide a more compact and order platform to fabricate GNPs on the electrode surface. The film formed by this technique has the advantages of high organization and uniformity, which could provide a desirable microenvironment to assemble GNPs and facilitate the concentration of the analyte from the bulk solution to the electrode surface. The nanostructured gold colloid electrode has favorable effect on the electrochemical oxidation of naphthol isomers.     

A Novel Photo‐Induced Electrochemical Biosensing Method Based on Fluorescent Labeled Molecular Beacon

A novel photo‐induced electrochemical biosensing method has been developed based on fluorescence quenching effect and electrochemical method. In this sensing strategy, the molecular beacon probes labeled with methylene blue were immobilized on the gold nanoparticles modified gold electrode surface firstly; then dopamine was assembled on the electrode surface through electrostatic interaction with gold nanoparticles. Under the continuous illumination, the fluorescence of the methylene blue was quenched by the gold nanoparticles before hybridization; after hybridization with the complementary DNA, methylene blue was far away from the gold nanoparticles and the fluorescence recovered, and then singlet oxygen was generated in the photosensitive reaction of methylene blue in the presence of dissolved oxygen. Singlet oxygen reacted with dopamine, which resulted in the reduction of concentration of the dopamine on the electrode surface. The current of the dopamine on the electrode was used for the sensing of the conformational change of molecular beacon and hence for the detection of target DNA.     

Influence of additives on the protoplasts electrofusion.

Various neutral or charged surface active substances were used for testing the influence of additives on the electrofusion of barley protoplasts. It was found that neutral surface active agents DX, TAGB, Span-80 and AEO-9 could promote the electrofusion. The positively charged surface active agents Bardac 2080, Bardac 2280 and amphoteric surface active agents dodecyl-propyl betaine and CAB betaine also promote the electrofusion, but at high concentration the electrofusion efficiency will reduce. The negatively charged polymer agents Cibacron blue DX, Fluoresceinylthiocarbamoyl DX, and active surface substances K12 and Carsonol TLS- presented negative effect. These phenomena were discussed from the view of adsorption of additives on the membrane and the interactions between protoplasts.     

集成化金膜阵列电极的制作研究

以聚乙烯不干胶掩膜版法结合金属溅射沉积技术在FR-4玻璃纤维版上制作了由6个金膜工作电极(1 mm×2 mm)、1个大面积金膜对电极(2 mm×13 mm)和1个厚膜Ag/AgCl参比电极构成的集成化金膜阵列电极系统,并利用电化学手段对阵列电极系统进行了考察。研究结果表明,K3Fe(CN)6在厚膜Ag/AgCl/1.0 mol/L NaCl参比电极上的式电位与商业Ag/AgCl/3.0 mol/L NaCl参比电极相差0.067 V;参比电极放置1个月后,测量电位未发生明显变化。利用扫描电化学显微镜对工作电极表面平整度进行考察,结果表明工作电极表面具有较好的平整度。通过测量H2SO4还原峰面积评价了工作电极电化学面积的批内、批间一致性;通过K3Fe(CN)6在电极上的Ipa/Ipc比值评价了工作电极电化学特性的批内、批间一致性。结果表明,阵列电极面积和电化学特性具有良好的批内和批间一致性。对集成化金膜阵列电极系统的研究结果表明,聚乙烯不干胶掩膜版法结合金属溅射沉积技术制作的阵列电极能够满足电化学电极的要求,可作为电化学生物传感器的基础电极。     

电极/反相微乳液体系电沉积制备纳米金镀层

将含有氯化金的强酸性水溶液作为水相与Triton X-100、正己醇、正己烷组成反相微乳液体系, 并以该微乳液构成电极/反相微乳液电极系统, 利用电沉积方法成功地制备出纳米Au镀层. 循环伏安和交流阻抗对反相微乳液体系电沉积过程的研究发现, 微乳液中Au(III)的还原为完全不可逆过程, 其电化学反应的阻抗值约为具有相同表观浓度氯化金水溶液体系的5.5倍. SEM研究结果表明, 利用微乳液体系电沉积获得的金镀层由纳米Au颗粒组成, 直径为50 nm左右. 所制备的纳米Au修饰电极由于具有较大的比表面积, 其电化学性能优于纯Au电极, 该电极在酸性条件下有较好的析氢性能, 在碱性条件对丙三醇有较好的电催化氧化性能.     

Simultaneous determination of both the calibration constant in an electrochemical quartz crystal microbalance and the active surface area of a polycrystalline gold electrode

A novel method is employed for the simultaneous determination of both the calibration constant of an electrochemical quartz crystal microbalance (EQCM) and the active surface area of a polycrystalline gold electrode. A gold electrode is immersed into a 1 mM KI/1 M H₂SO₄ solution and on which forms a neutral monolayer. The adsorbed iodine can then be completely oxidized into IO₃⁻. The active surface area of a gold electrode can be obtained from the net electrolytic charge of the oxidation process, and the calibration constant in the EQCM can be calculated from the corresponding frequency shift. The result shows that this method is simple, convenient and valid.     

基于聚苯胺纳米纤维复合膜界面构建电化学细胞传感器及其对癌细胞的识别检测

合成了聚苯胺纳米纤维,直径在50～70 nm之间;基于静电作用构建聚苯胺纳米纤维-纳米金复合膜界面,并在此界面上层层组装修饰叶酸分子,构建叶酸功能化传感界面,基于叶酸分子与癌细胞表面过量表达的叶酸受体之间的特异性识别作用,将此传感界面应用于对癌细胞的识别和捕获。结果表明:叶酸功能化传感界面能够特异性识别和捕获叶酸受体过量表达的癌细胞。采用电化学阻抗技术,以HeLa细胞为模型,应用于对癌细胞的识别和检测,细胞在1.0×104～6.4×106cells/mL浓度范围内与阻抗变化值ΔRct呈良好的线性关系;检出限为2000 cells/mL。本方法简单、快速灵敏、重现性和稳定性良好;制备的传感器可以再生使用。     

L-半胱氨酸修饰金电极电化学发光法测定罗红霉素

在裸金电极上制备了L-半胱氨酸自组装膜修饰电极(L-Cys-Au/SAM/CME).考察了联吡啶钌和罗红霉素在此修饰电极上的电化学及其发光行为.结果表明,此修饰电极表现出了很好的电化学活性和电化学发光(ECL)响应.基于罗红霉素的存在可增大了联吡啶钌的发光强度,建立了测定罗红霉素片的电化学发光分析方法.在最佳实验条件下,罗红霉素浓度在1.0×10-7～1.0×10-4 mol/L范围内与其相对发光强度呈线性关系,其线性回归方程为I=2×107C+384.02, r=0.9977; 检出限(S/N=3)为1.0×10-7 mol/L.连续测定1.8×10-5 mol/L罗红霉素10次,发光强度的RSD为1.93% , 表明此修饰电极具有较好的重现性,并将本方法用于罗红霉素片剂的检测.     

Oligonucleotide Functionalized Microporous Gold Electrode for the Selective and Sensitive Determination of Mercury by Differential Pulse Adsorptive Stripping Voltammetry (DPAdSV)

Abstract

A novel electrode modified with oligonucleotide and microporous gold was fabricated for the determination of mercury by differential pulse adsorptive stripping voltammetry (DPAdSV). Microporous gold was synthesized by electrochemical reduction using dynamic hydrogen bubble template. The oligonucleotide was immobilized on microporous gold by self-assembly. The prepared electrode exhibited an improved electrochemical response for mercury(II) ion because of the large surface area and excellent electron transfer capacity provided by microporous gold and the specific coordination between mercury ion and thymine bases in oligonucleotides. Under the optimal experiment conditions, the oligonucleotide functionalized microporous gold electrode had a linear relationship between the stripping current and mercury ion concentration in the range from 0.5 to 30?µg/L with a detection limit of 0.021?µg/L. Moreover, the prepared electrode exhibited good selectivity, reproducibility, repeatability and stability. Furthermore, the prepared electrode was applied to detect mercury in tap water with satisfactory results.     

Disposable immunoassay for hepatitis B surface antigen based on a graphene paste electrode functionalized with gold nanoparticles and a Nafion-cysteine conjugate

We report on the modification of a graphene paste electrode with gold nanoparticles (AuNPs) and a Nafion-L-cysteine composite film, and how this electrode can serve as a platform for the construction of a novel electrochemical immunosensor for the detection of hepatitis B surface antigen (HBsAg). To obtain the immunosensor, an antibody against HBsAg was immobilized on the surface of the electrode, and this process was followed by cyclic voltammetry and electrochemical impedance spectroscopy. The peak currents of a hexacyanoferrate redox system decreased on formation of the antibody-antigen complex on the surface of the electrode. Then increased electrochemical response is thought to result from a combination of beneficial effects including the biocompatibility and large surface area of the AuNPs, the high conductivity of the graphene paste electrode, the synergistic effects of composite film, and the increased quantity of HBsAb adsorbed on the electrode surface. The differential pulse voltammetric responses of the hexacyanoferrate redox pair are proportional to the concentration of HBsAg in the range from 0.5–800?ng?mL^?1, and the detection limit is 0.1?ng?mL^?1 (at an S/N of 3). The immunosensor is sensitive and stable.

荧光性自组装双层膜的制备及其性能研究

借助Au-S化学键的作用,在金基底上组装DL-半胱氨酸,利用DL-半胱氨酸与1-萘胺乙酸(NAA)的静电吸引作用在金表面间接组装荧光试剂NAA,从而构建了双层自组装膜NAA/Cys/Au.该自组装膜有较强的荧光信号,能被Cu²⁺猝灭,并具有较好的可逆再生性能,可用于超痕量铜离子的界面荧光测定,对Cu²⁺的检出下限为7.87×10^-11mol/L.同时采用电化学、荧光光谱及电子能谱等方法表征自组装膜的结构,并采用电化学阻抗谱技术和循环伏安法研究自组装膜在K₃[Fe(CN)₆]/K₄[Fe(CN)₆]溶液中的电化学行为研究.结果表明,金表面组装的单层膜具有良好的“针孔”效应,组装上荧光试剂之后形成的无“针孔”缺陷的自组装双层膜对溶液与基底间的界面电子转移有强烈的阻碍作用.     

新型乙基溴硫磷印迹膜/纳米金化学修饰电极的研制及应用

以恒电位将金纳米粒子(AuNP)沉积于玻碳电极表面,在模板分子乙基溴硫磷存在下通过循环伏安法将L-半胱氨酸组装到金纳米粒子修饰的玻碳电极上,制备了可选择性识别乙基溴硫磷的L-Cys/ AuNP/ GCE印迹膜电极.结果表明,该电极具有良好的稳定性和重现性,对乙基溴硫磷的线性响应范围为2.5 ～17.5μmol/L,检出...