Synthesis,characterization and antioxidant activities of dioxomolybdenum(VI) complexes of new Schiff bases derived from substituted benzophenones

Abstract

Five novel ONS donor Schiff base ligands were synthesized by the reaction of 2-hydroxybenzophenone (L1), 2-hydroxy-4-methoxybenzophenone (L2), 2-hydroxy-4-octyloxybenzophenone (L3), 2-hydroxy-4-methoxy-4′-methylbenzophenone (L4), and 2-hydroxy-4-allyloxybenzophenone (L5) with thiocarbohydrazide. Neutral solvate dioxomolybdenum(VI) complexes with the general formula [MoO₂L(ROH)], [C1–C5] (L?=?L1, L2, L3, L4, L5 and R?=?CH₃, C₂H₅, or C₄H₉), were prepared from these Schiff bases. Characterization of all compounds was carried out by means of elemental analysis, conductivity measurements, ¹H-NMR, FT-IR, UV-Vis spectroscopy and mass spectrometry (for L1, C2, and C4) techniques. The crystal structures of ligand (L5) and complex (C1) were determined by single-crystal X-ray crystallography. Spectroscopic data and X-ray diffraction studies confirmed that the ligand is coordinated to the cis-MoO₂²⁺ core through ONS, while the sixth coordination site is occupied by solvent (ROH). The ligands and complexes were tested for in vitro antioxidant capacities. The TEAC coefficients of the ligands and complexes were found higher than reference compound. DPPH radical scavenging activities of these compounds were also investigated.     

Synthesis and structural studies of tin(II) complexes of semicarbazones and thiosemicarbazones

The synthesis and characterization of tricoordinated tin(II) complexes with semicarbazones and thiosemicarbazones of the type, Sn · L (where L = the semicarbazone or thiosemicarbazone of salicylaldehyde, o-hydroxyacetophenone, 2-hydroxy-1-naphthaldehyde and benzoin) are reported. On the basis of electronic, IR, ¹H NMR and Mössbauer spectral studies, some tentative structures have been proposed for these new compounds.     

Heterobimetallic dioxomolybdenum(VI) complexes derived from bis(2-hydroxy-1-naphthaldehyde)malonoyldihydrazone: Synthesis and characterization

The heterobimetallic complexes [MMoO₂(L)(H₂O)₂] (where M = Zn²⁺ (1), Cu²⁺ (2), and Co²⁺ (4)) and [{MMoO₃(H₂L)(H₂O)₂}₂] (where M = Ni²⁺ (3) and Mn²⁺ (5)) are synthesized from bis(2-hydroxy-1-naphthaldehyde)malonoyldihydrazone (H₄L) using the monometallic precursor complex [MoO₂(H₂L)]·H₂O in ethanol. The composition of the complexes is established based on the data obtained from the elemental analysis and molecular weight determinations. The structure of the complexes is discussed in the light of data obtained from molar conductance, magnetic moment, electronic, EPR and IR spectroscopic studies.     

Synthesis and catalytic properties in olefin epoxidation of chiral oxazoline dioxomolybdenum(VI) complexes

Dioxomolybdenum(VI) complexes with the general formula [MoO₂X₂(N,N)] (X = Cl, OSiPh₃) containing a chiral bidentate oxazoline ligand (N,N = 2,2′-bis[(4S)-4-benzyl-2-oxazoline]) have been prepared and characterised by ¹H NMR, IR spectroscopy and thermogravimetric analysis. The bis(chloro) complex was heterogenised in the ordered mesoporous silica MCM-41 by direct grafting in dichloromethane. Elemental analysis and ²⁹Si MAS NMR spectroscopy of the derivatised material indicated the presence of monopodally anchored species of the type MoO₂[(–O)₃SiO]Cl(N,N). The complex [MoO₂Cl₂(N,N)] and the derivatised material exhibited initial activities of 147 and , respectively, in the catalytic epoxidation of cyclooctene using tert-butylhydroperoxide (tBuOOH) as the oxidant, both yielding 1,2-epoxycyclooctane quantitatively within 24 h at 55 °C. The MCM-41 grafted catalyst could be recycled with no loss in performance with respect to the epoxide yields obtained for reaction times above 2 h. With trans-β-methylstyrene as the substrate, the bis(chloro) complex and the derivatised material gave epoxides as the only products with yields in the range of 56–64% after 24 h, but no catalytic asymmetric induction was observed. The triphenylsiloxy complex was more active than the bis(chloro) complex for the epoxidation of trans-β-methylstyrene, but the enantiomeric excess was negligible and the corresponding diols were also formed. For the reaction catalysed by the supported material, changing the oxidant from tBuOOH to cumene hydroperoxide greatly improved the catalytic activity but the enantiomeric excess continued very low and the corresponding diol was the main product.     

Synthesis,crystal structures,and catalytic property of dioxomolybdenum(VI) complexes with hydrazones

Two new dioxomolybdenum(VI) complexes, [MoO₂(L₁)] _n · 0.5 _n CH₃OH (I) and [MoO₂(L₂)(CH₃OH)] (II), where L1 and L₂ are the dianionic form of N′-[1-(4-diethylamino-2-hydroxyphenyl)methylidene]isonicotinohydrazide and N′-(2-hydroxy-4-methoxybenzylidene)-3-methylbenzohydrazide, respectively, were prepared and structurally characterized by physicochemical and spectroscopic methods and single-crystal X-ray determination. For complex I, a polymeric structure is obtained, which is linked by coordination of the pyridine N atoms to the Mo atoms of other [MoO₂(L₁)] units. Complex II is a mononuclear molybdenum compound. In both complexes, the Mo atoms are in octahedral coordination. The catalytic properties of the complexes indicate that they are efficient catalysts for sulfoxidation.     

Synthesis and spectroscopic studies of Sb(III) and Bi(III) complexes of semicarbazones

Summary New complexes of Sb(III) and Bi(III) with semicarbazones of the general formulae SbCl₃ L and BiCl₃ L (whereL=semicarbazones) have been prepared and characterized by IR,¹H- and¹³C-NMR spectral measurements. The results of the spectroscopic studies indicate that the semicarbazone ligands act as bidentate in all the complexes. All complexes are non-electrolytes inDMF solution. The molecular weight determinations indicate that the compounds are monomeric.

---

Synthese und spektroskopische Untersuchungen von Sb(III)- und Bi(III)-Komplexen mit Semlcarbazonen

Zusammenfassung Es wurden neue Komplexe von Sb(III) und Bi(III) mit Semicarbazonen von der allgemeinen Formel SbCl₃ L und BiCl₃ L (L=verschiedenene Semicarbazone) dargestellt und mittels IR,¹H- und¹³C-NMR charakterisiert. Die spektroskopischen Untersuchungen zeigten, daß die Semicarbazon-Liganden in allen Komplexen zweizähnig agieren. Molekulargewichtsbestimmungen zeigten die monomere Natur der Verbindungen an.

     

Synthesis,crystal structures and catalytic epoxidation properties of dioxomolybdenum(VI) complexes with hydrazone ligands

A series of dioxomolybdenum(VI) complexes with similar hydrazone ligands have been prepared, specifically [MoO₂L¹(MeOH)] (1), [MoO₂L²(MeOH)] (2) and [MoO₂L³(MeOH)] (3), where L¹, L² and L³ are the dianionic forms of 2-chloro-N′-(2-hydroxybenzylidene)benzohydrazide, 2-chloro-N′-(2-hydroxy-5-methylbenzylidene)benzohydrazide and N′-(3-bromo-5-chloro-2-hydroxybenzylidene)-2-chlorobenzohydrazide, respectively. The complexes were characterized by physicochemical and spectroscopic methods and also by single-crystal X-ray determination. The hydrazone ligands coordinate to the Mo atoms through their phenolate O, imine N and enolic O atoms. The Mo atoms are six-coordinated in octahedral geometries. The complexes show high catalytic activities and selectivities in the epoxidation of cyclohexene with tert-butylhydroperoxide as primary oxidant.     

Synthesis and characterization of ruthenium heterocyclic-thiocarboxylate complexes

The cyclopentadienyl ruthenium complexes CpRuL₂SCO-het (Cp = η⁵-C₅H₅; L₂ = 2PPh₃ (1), dppe (2)) bearing heterocyclic thiocarboxylate ligands have been synthesized from the reaction of CpRuL₂SH with heterocyclic acid chlorides (ClCO-2-C₄H₃S (a); ClCO-2-C₄H₃O (b); ClCO-1-C₄H₈N (c)). Bubbling of CO gas through a THF solution of (1) produced the mixed carbonyl–phosphine complexes CpRu(PPh₃)(CO)SCO-het (3) with high yields. Complexes (1)-(3) were characterized by spectroscopic methods (i.r., ¹H-n.m.r., ³¹P-n.m.r.) and elemental analysis. The molecular structure of CpRu(PPh₃)₂SCO-2-C₄H₃S (1a) verifies that the thiocarboxylate ligands bind via the sulfur atom (Ru–S = 2.406(2) Å).     

Synthesis and characterization of asymmetric NHC complexes

New chiral and non-chiral rhodium(I)–NHC complexes were synthesized. The first attempt by deprotonation of an imidazolinium salt with KOtBu and reaction with [Rh(COD)Cl]₂ leads to the corresponding rhodium(I) complex. Due to the basic conditions during the reaction a loss of chirality occurs. An alternative transmetallation reaction with a silver(I)–NHC complex yields the desired rhodium(I)–NHC complex under retention of chirality. Both Rh complexes were fully characterized by analytical methods.     

Rhenium complexes with triazine derivatives formed from semicarbazones and thiosemicarbazones

Benzil bis(semicarbazone), H2L(1), reacts with common rhenium(V) nitrido complexes such as [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] (R = Me, Et) under the release of one semicarbazone unit, cyclization, and formation of stable triazine-3-onato complexes of rhenium(V). The resulting 5,6-diphenyltriazine-3-one, HL (2), acts as monodentate or chelating, monoanionic ligand depending on the reaction conditions applied. Complexes of the compositions [ReNCl(L(2)-kappaN(2),kappaO)(PR2Ph)2] (R = Me, Et) or [ReN(L(2)-kappa N(2),O)(L(2)-kappaN(2))(PPh3)2] were isolated. The N(2) nitrogen atom is the preferred binding site of the monodentate form of the ligand. This contrasts the behavior of the analogous thione HL(3), which preferably coordinates to nitridorhenium(V) centers via the sulfur atom. HL(3) is readily formed by the abstraction of methanol from 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione, H2L(3)OCH 3. In the presence of [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] complexes (R = Me, Et), this reaction yields stable complexes of the composition [ReN(L(3)-kappaN(2),kappaS)(L(3)-kappaS)(PR2Ph)2] (R = Me, Et, Ph) in good yields. Reduction of the metal atom and formation of the seven-coordinate [Re(PPh3)(L(3)-kappaN(2),kappaS)3] was observed during reactions of H2L(3)OCH3 with [ReOCl3(PPh3)2] or [ReO2I(PPh3)2], while no rhenium complexes could be isolated during similar reactions with H2L(1), although cyclization of the bis(semicarbazone) and the formation of H 2L(2)OEt were observed.     

Synthesis and characterization of new dioxomolybdenum(VI) complexes of ONS donor Schiff bases derived from thiosemicarbazide,S-methyldithiocarbazate,S-benzyldithiocarbazate ando-hydroxy-aromatic aldehydes/ketones

Summary Syntheses of several new dioxomolybdenum(VI) complexes with composition MoO₂L · MeOH (where LH₂ = Schiff base derived from salicylaldehyde, 2-hydroxy-1-naphthaldehyde,o-hydroxyacetophenone,o-hydroxybenzophenone, pyridoxal and thiosemicarbazide,S-methyldithiocarbazate orS-benzyldithiocarbazate) are reported. The complexes have been characterized by elemental analysis, i.r., n.m.r. and electronic spectra, conductance, molecular weight and magnetic susceptibility measurements. The complexes are monomers, nonelectrolytes, diamagnetic and six-coordinated. The Schiff bases behave as dibasic tridentate ligands and coordinate through phenolic oxygen, thioenolic sulphur and azomethine nitrogen atoms. The complexes have acis-O=Mo=O structure as evidenced by the presence of two strong bands at 880–915 and 925–955 cm^–1. All of the complexes exhibit a band atca. 25000 cm^–1 due to the ligand to metal charge transfer transition.     

Synthesis and characterization of phosphorescent cyclometalated iridium complexes

The preparation, photophysics, and solid state structures of octahedral organometallic Ir complexes with several different cyclometalated ligands are reported. IrCl3.nH2O cleanly cyclometalates a number of different compounds (i.e., 2-phenylpyridine, 2-(p-tolyl)pyridine, benzoquinoline, 2-phenylbenzothiazole, 2-(1-naphthyl)benzothiazole, and 2-phenylquinoline), forming the corresponding chloride-bridged dimers, CwedgeN2Ir(mu-Cl)2IrCwedgeN2 (CwedgeNis a cyclometalated ligand) in good yield. These chloride-bridged dimers react with acetyl acetone (acacH) and other bidentate, monoanionic ligands such as picolinic acid (picH) and N-methylsalicylimine (salH), to give monomeric CwedgeN2Ir(LX) complexes (LX = acac, pic, sal). The emission spectra of these complexes are largely governed by the nature of the cyclometalating ligand, leading to lambda(max) values from 510 to 606 nm for the complexes reported here. The strong spin-orbit coupling of iridium mixes the formally forbidden 3MLCT and 3pi-pi* transitions with the allowed 1MLCT, leading to a strong phosphorescence with good quantum efficiencies (0.1-0.4) and room temperature lifetimes in the microsecond regime. The emission spectra of the CwedgeN2Ir(LX) complexes are surprisingly similar to the fac-IrCwedgeN3 complex of the same ligand, even though the structures of the two complexes are markedly different. The crystal structures of two of the CwedgeN2Ir(acac) complexes (i.e., CwedgeN = ppy and tpy) have been determined. Both complexes show cis-C,C', trans-N,N' disposition of the two cyclometalated ligands, similar to the structures reported for other complexes with a "CwedgeN2Ir" fragment. NMR data (1H and 13C) support a similar structure for all of the CwedgeN2Ir(LX) complexes. Close intermolecular contacts in both (ppy)2Ir(acac) and (tpy)2Ir(acac) lead to significantly red shifted emission spectra for crystalline samples of the ppy and tpy complexes relative to their solution spectra.     

Synthesis and characterization of methyl-phenyl-substituted cyclopentadienyl zirconium complexes

The trisubstituted methyl-phenyl-silyl-cyclopentadienes [Me-Ph-C₅H₃(SiMe₂X)] (X = Me, Cl, NHt-Bu) and [(Me-Ph-C₅H₃)₂SiMe₂] and the lithium salts Li₂[Me-Ph-C₅H₂(SiMe₂Nt-Bu)] and Li₂[(Me-Ph-C₅H₂)₂SiMe₂] have been isolated by conventional methods and characterized by NMR spectroscopy. Desilylation of [Me-Ph-C₅H₃(SiMe₃)] with ZrCl₄(SMe₂)₂ gave the monocyclopentadienyl complex [Zr(η⁵-1-Ph-3-Me-C₅H₃)Cl₃]. The ansa-metallocene [Zr{(η⁵-2-Me-4-Ph-C₅H₂)SiMe₂(η⁵-2-Ph-4-Me-C₅H₂)}Cl₂] was obtained from the mixture of isomers formed by transmetallation of Li₂[(Me-Ph-C₅H₂)₂SiMe₂] to ZrCl₄ and characterized as the meso-diastereomer by X-ray diffraction methods. Similar transmetallation of Li₂[Me-Ph-C₅H₂(SiMe₂Nt-Bu)] gave the silyl-η-amido complex [Zr{η⁵-2-Me-4-Ph-C₅H₂(SiMe₂-η-Nt-Bu)}Cl₂] that was further alkylated to give [Zr{η⁵-2-Me-4-Ph-C₅H₂(SiMe₂-η-Nt-Bu)}R₂] (R = Me, CH₂Ph) and used as a catalyst precursor, activated with MAO, for ethene and propene polymerization. All of the new compounds were characterized by elemental analysis and NMR spectroscopy.     

Synthesis and characterization of electron-rich nickel tris-carbene complexes

The synthesis and characterization of the first nickel(0)/(i) tris-carbene complex with a nitrogen anchored tripodal N-heterocyclic carbene ligand are described.     

Synthesis and characterization of new cyclopalladated carbene complexes

Di-μ-chlorobis(2-methyl-2-methoxy-3-t-butylthiopropyl)dipalladium(II) reacted with bis(1,3-diphenyl-2-imidazolidinylidene) to afford a new chlorobridged carbene complex [{PdCl(did)}₂] (did  1,3-diphenyl-2-imidazolidinyl-idenato,2-C,2′-C) in 46.2% yield, which has a cyclopalladated chelate structure involving a Pd—carbene and a Pd—aryl bond; new carbene complexes, [{PdBr(did)}₂], [{Pd(CH₃COO)(did)}₂], [Pd(acac)(did)], and [PdCl(did)Q] (Q  4-MePy, P[OCHMe₂]₃) were also prepared from [{PdCl(did)}₂].     

异双希夫碱配合物的合成与表征

邻苯二胺与5-氯-2-羟基二苯酮、2-羟基-1-萘醛作用合成了一种异双四齿希夫碱配体C30H21N2O2Cl(H2L)。在无水体系中该配体与金属醋酸盐作用合成了5种固体配合物[ML]·nH2O(M=Cu(Ⅱ),Zn(Ⅱ),Mn(Ⅱ),Co(Ⅱ),Ni(Ⅱ);n=0-1)。通过元素分析、IR、UV、TG-DTG及摩尔电导分析等手段对合成的配合物进行了表征。     

Synthesis and structural characterization of triphenyltin halide-lactam complexes

Reactions of triphenyltin chloride or isothiocyanate with lactum yield complexes of the type Ph₃SnX · L (X = Cl or NCS, L = lactam). The coordination of the carbonyl group of lactams to the tin atom has been suggested by IR data and confirmed by X-ray diffraction analysis.The crystal and molecular structure of triphenyltin chloride-ϵ-caprolactam complex, C₂₄H₂₆ClNOSn, has been determined by X-ray diffraction analysis. The crystals are orthorhombic, space group Pbca, a 18.839(1), b 14.392(2), c 29.059(6) Å, Z = 8; R = 0.047, R_w = 0.058 for 3579 unique reflections. The geometry around the tin atom is trigonal bipyramidal with the three phenyl groups defining the equatorial plane and a chlorine ion and a carbonyl oxygen of the caprolactam ligand occupying the axial positions.