Modifications induced by gamma irradiation upon structural,optical and chemical properties of polyamide nylon-6,6 polymer

The effects of gamma rays were studied on the optical, structural and chemical properties of the PA-66 polymer samples. The polymer samples obtained from Goodfellow (Cambridge, UK) were irradiated with gamma rays at various doses ranging from 100 to 1250 kGy. The pristine and gamma rays irradiated samples were characterized by UV–visible (UV–VIS) spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. UV–VIS shows a shift in absorption toward the visible region for irradiated samples and a decrease in band gap energy (E_g). The XRD analyses show an increase in the crystalline nature of the polymer at higher doses as a result of significant decrease in the peak width of XRD patterns. The FTIR spectra show decrease in intensity and shift of various bands with increase in gamma dose.     

Surface modification of Makrofol-DE induced by α-particles

In the present work, Makrofol DE samples were irradiated with different doses of alpha particles. The optical and mechanical modifications in the alpha-irradiated Makrofol samples as a function of alpha irradiation time have been investigated. Different characterization techniques, UV–vis spectroscopy, photoluminescence spectroscopy and Vickers micro hardness tester have been used. UV–vis spectra of bombarded samples reveal that the optical absorption increases with increasing the irradiation time. The direct and indirect optical band gap was found to decrease from 3.4 and 2.81?eV for pristine sample to 3.1 and 2.35?eV for that bombarded with alpha particles at the highest irradiation time (15?h), respectively. The number of carbon atoms per conjugated length (N) and the number of carbon atoms per cluster (M) have been estimated. An increase in both N and M with increasing the irradiation time was noticed. A remarkable decrease in PL intensity with increasing the alpha irradiation time was observed. This decrease is attributed to ion beam-induced change in molecular structure and/or defects in the modified layer. The surface hardness for unmodified and modified polymeric material has been studied.     

The ultraviolet luminescence of β-galliumsesquioxide

The luminescence of β-Ga₂O₃ crystals and powder specimens has been studied in the temperature range 5–300 K. The measurements have been performed on nominally pure samples and on samples that had been doped with aliovalent cations. In all samples an emission is observed at low temperatures in the ultraviolet (UV) region of the spectrum. We conclude that this emission is intrinsic, since neither its intensity nor its position was influenced by the impurity content or the history of the samples. Measurements of the optical density and the photoconductivity in the energy range where this UV emission can be excited reveal that the UV emission is excited in an interband transition. By analogy with the well-known instrinsic emission of the alkali halides, the intrinsic UV emission in β-Ga₂O₃ is attributed to the recombination of an electron (hole) and a self-trapped hole (electron).     

Optical spectroscopic investigations on silver doped sodium phosphate glass

This research investigates the optical spectroscopic characteristics of silver-doped phosphate antibacterial glasses with chemical compositions 42P₂O₅–42ZnO–(16?x) Na₂O, (where x = 0, 0.4, 0.8, 1.2, 1.6 Ag₂O). The glass samples were prepared by conventional melting quenching techniques. The structures of all the homogenous prepared glasses were studied by XRD, and UV–Vis spectroscopy. The glass formability was tested and the amorphous nature was approved using XRD-technique. Archimedes method has been employed to measure the density of the samples hence, the molar volume was calculated. The molar volume and density shows discontinuity of measurements under effect of increasing Ag₂O concentration. The optical spectroscopic analyses for the obtained glass samples has been investigated over the whole range (190–2500 nm) for studying the effect of bandpass absorption glass filter, its color peak center and UV cut-off. Transmittance of some glass samples showed cut-off for UV and short visible wavelengths in some glass samples, so these samples composition can be considered as long-pass edge filters and from band stop ranges started from 190 to 515 nm and increase by increasing doped silver concentration. The optical energy gap decreases by increasing the Ag₂O concentration from 4.43 to 3.61 eV. The refractive index and extinction coefficient and some optical properties are studied and the results indicate clearly that there is no high remarkable change with changing wavelength. The refractive index is found to be increased by increasing the Ag₂O content. The wavelength dependence of extinction coefficient and the dielectric constants exhibit higher values for higher Ag₂O contents.     

A novel approach to enhancement of surface properties of CdO films by using surfactant: dextrin

We studied the effect of an organic surfactant, dextrin, concentration on structural, morphological and optical properties of nanostructured CdO films deposited on glass substrates by using an easy and low-cost SILAR method. Microstructures of the nanostructured CdO films were optimized by adjusting dextrin concentration. XRD, SEM and UV–Vis Spectroscopy were used to study phase structure, surface morphology and optical properties of CdO films. Furthermore, effects of dextrin concentration on the surface roughness characteristics of CdO samples were reported. The results showed that the presence of organic surfactant highly affected the physical properties of CdO nanomaterials.     

Tailoring the optical and hydrophobic property of zinc oxide nanorod by coating with amorphous graphene

Zinc oxide (ZnO) nanorods were synthesized at room temperature on potassium permanganate activated silicon and glass substrate by simple chemical method using zinc acetate as precursor.To modify the surface energy of the as prepared ZnO thin films the samples were coated with amorphous graphene (a-G) synthesized by un-zipping of chemically synthesized amorphous carbon nanotubes (a-CNTs). All the pure and coated samples were characterized by x-ray diffraction, field emission scanning electron microscope, Raman spectroscopy, and Fourier transformed infrared spectroscopy. The roughness analysis of the as prepared samples was done by atomic force microscopic analysis. The detail optical properties of all the samples were studied with the help of a UV-Visible spectrophotometer.The surface energy of the as prepared pure and coated samples was calculated by measuring the contact angle of two different liquids. It is seen that the water repellence of ZnO nanorods got increased after they are being coated with a-Gs. Also even after UV irradiation the contact angle remain same unlike the case for the uncoated sample where the contact angle gets decreased significantly after UV irradiation. Existing Cassie-Wenzel model has been employed along with the Owen's approach to determine the different components of surface energy.     

Structural,morphological, optical and antibacterial activity of rod-shaped zinc oxide and manganese-doped zinc oxide nanoparticles

Pure ZnO and Mn-doped ZnO nanoparticles were synthesized by Co-precipitate method. The structural characterizations of the nanoparticles were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. UV–Vis, FTIR and photoluminescence (PL) spectroscopy were used for analysing the optical properties of the nanoparticles. XRD results revealed the formation of ZnO and Mn-doped ZnO nanoparticles with wurtzite crystal structure having average crystalline size of 39 and 20 nm. From UV–Vis studies, the optical band-gap energy of 3.20 and 3.25 eV was obtained for ZnO and Mn-doped ZnO nanoparticles, respectively. FTIR spectra confirm the presence of ZnO and Mn-doped ZnO nanoparticles. Photoluminescence analysis of all samples showed four main emission bands: a strong UV emission band, a weak blue band, a weak blue–green band and a weak green band indicating their high structural and optical qualities. The antibacterial efficiency of ZnO and Mn-doped ZnO nanoparticles were studied using disc diffusion method. The Mn-doped ZnO nanoparticles show better antibacterial activity when higher doping level is 10 at% and has longer duration of time.     

Transient-reflectivity study of pulsed UV-laser-induced oxidation of Sb

Laser-induced oxidation of single-crystalline antimony and polycrystalline Sb films is studied. The samples are irradiated in an oxygen atmosphere (1.2 bar) by means of UltraViolet (UV) laser pulses while reflectivity measurements are used to monitor the oxidation process in real time. It is shown that there is an optical coupling between the growing oxide layer and the bulk material underneath which produces a dynamical change of the optical properties and leads to a non-constant growth rate. Depending on the laser energy density used, there is a critical oxide thickness above which a material-loss process starts, limiting the ultimate growth of the oxide layer.     

Li-impurity effect in optical spectra of KTaO<Subscript>3</Subscript>:Er<Superscript>3+</Superscript> crystals

The optical properties of one-dimensional photonic crystals based on porous anodic aluminum oxide films have been studied by measuring transmittance and specular reflectance spectra in the visible and UV spectral regions. Angular dependences of the spectral positions of optical stop bands are obtained. It is shown that the reflectance within the first stop band varies from point to point on the sample surface, reaching a level of 98–99% at some points. The dispersion relation for electromagnetic waves in the model of infinite periodic structure is calculated for the samples under study. The possibility of using models with an infinite or finite number of layers to calculate reflectance spectra near the first optical stop band is discussed.     

采用紫外光照法在磷酸盐玻璃中合成CdS/Ag复合微粒

掺杂有Ⅱ-Ⅵ族半导体纳米颗粒(如CdS)或者过渡金属(如Ag)的玻璃由于其较大的非线性光学效应而引起人们的极大兴趣,而同时掺杂有半导体/金属的复合微粒则可以进一步增强玻璃的三阶非线性效应,因此成为目前的研究热点。我们利用玻璃沉淀技术及随后的热处理和紫外光还原技术制备了含高浓度(1%)Ag微粒的玻璃,并采用X射线衍射分析了其物相,用高分辨扫描电镜分析了其形貌,以及测试了其吸收和发光性能。从CdS/Ag复合微粒的扫描照片可以发现晶粒均匀分布在玻璃中,尺寸约为1μm。X射线衍射发现经过热处理和紫外光照的样品衍射峰中含有CdS和Ag,而只进行热处理的样品则只含有CdS,未处理的样品则显非晶态。CdS/Ag复合微粒的吸收峰呈现典型的表面等离子共振峰(420nm)以及CdS的峰(600nm),只含有CdS微粒的样品的吸收峰则在480nm附近,未处理的样品在320nm附近有一个吸收峰,这可能是由于样品在快速冷却过程中的微小晶化造成的。只含有CdS微粒的样品有三个明显的发光峰,然而CdS/Ag复合微粒的发过峰则消失。我们提出了共振能量转移机制来解释该现象。讨论了紫外光照还原Ag微粒的机制。可以认为通过紫外光照,CdS表面的电子被激发出来还原Ag+,从而形成银颗粒,伴随着空穴则被表面缺陷所捕获。     

Latent track creation in fused silica by 200 MeV silver beam

Studies of formation of latent tracks in swift heavy ion irradiated SiO₂ are presented. Fused silica (SiO₂) were irradiated with 200 MeV silver (Ag) ion beam at varying fluences. Radiation-induced effects were studied by ultraviolet(UV)/Visible optical absorption spectroscopy and transmission electron microscopy (TEM). UV/Visible absorption study indicated E′ centers and oxygen deficiency centers having characteristic absorption occurred at 5 eV. The density of these color centers calculated from the absorption peak intensity showed Poisson-type variation with irradiation fluence. The defects are thus entirely confined to the latent tracks created by swift heavy ions in SiO₂. The track radius estimated from optical absorption study was found to be 5.1 nm. Similar results were obtained from TEM studies of the irradiated samples.     

Effect of doping and annealing on the physical properties of ZnO:Mg nanoparticles

Well-dispersed undoped and Mg-doped ZnO nanoparticles with different doping concentrations at various annealing temperatures are synthesized using basic chemical solution method without any capping agent. To understand the effect of Mg doping and heat treatment on the structure and optical response of the prepared nanoparticles, the samples are characterized using X-ray diffraction (XRD), energy-dispersive X-ray (EDX), UV–Vis optical absorption, photoluminescence (PL), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements. The UV–Vis absorbance and PL emission show a blue shift with increasing Mg doping concentration with respect to bulk value. UV–Vis spectroscopy is also used to calculate the band-gap energy of nanoparticles. X-ray diffraction results clearly show that the Mg-doped nanoparticles have hexagonal phase similar to ZnO nanoparticles. TEM image as well as XRD study confirm the estimated average size of the samples to be between 6 and 12 nm. Furthermore, it is seen that there was an increase in the grain size of the particles when the annealing temperature is increased.     

The structural and optical properties of ZnO/Si thin films by RTA treatments

ZnO/Si thin films were prepared by rf magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process at different temperatures ranging from 400 to 800 °C. The effects of RTA treatment on the structural properties were studied by using X-ray diffraction and atomic force microscopy while optical properties were studied by the photoluminescence measurements. It is observed that the ZnO film annealed at 600 °C reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at 600 °C is attributed to the improved crystalline quality of ZnO film due to the effective relaxation of residual compressive stress and achieving maximum grain size.     

Wet chemical synthesis and characterization of pure and cerium doped Dy2O3 nanoparticles

Pure and cerium doped Dy₂O₃ nanoparticles were prepared by wet chemical synthesis route. The particles were subjected to thermal, structural, morphological and optical property studies. The calcination temperature was chosen based on the decomposition of the samples revealed by TG studies. EDS and FTIR results confirmed the presence of cerium in the Dy₂O₃ system. The particle size calculated from Williamson-Hall plot was consistent with TEM results. The effect of cerium as a dopant on the UV–vis absorption and photoluminescence intensity has been studied. XRD and PL analyses demonstrate that the cerium ions uniformly substitute dysprosium sites in Dy₂O₃ lattice and hence influence the optical properties.     

Influence of Al-doping on the structure and optical properties of ZnO films

Al-doped ZnO (ZnO:Al) thin films with c-axis preferred orientation were deposited on glass substrates using the radio frequency reactive magnetron sputtering technique. The effect of Al concentrations on the microstructure and the luminescence properties of the ZnO:Al thin films were studied by atomic force microscopy (AFM), X-ray diffraction (XRD), and fluorescence spectrophotometer. The results showed that the crystallization of the films was promoted by appropriate Al concentrations; the photoluminescence spectra (PL) of the samples were measured at room temperature. Strong blue peak located at 437 nm (2.84 eV) and two weak green peaks located at about 492 nm (2.53 eV) and 524 nm (2.37 eV) were observed from the PL spectra of the four samples. The origin of these emissions was discussed. In addition, absorption and transmittance properties of the samples were researched by UV spectrophotometer; the UV absorption edge shifted to a shorter wavelength first as Al was incorporated, and then to a longer wavelength with the increasing Al concentrations. The optical band gaps calculated based on the quantum confinement model are in good agreement with the experimental values.     

Ellipsometry investigation of the effects of annealing temperature on the optical properties of indium tin oxide thin films studied by Drude-Lorentz model

Float glass substrates covered by high quality ITO thin films (Balzers) were subjected for an hour to single thermal treatments at different temperature between 100 °C and 600 °C. In order to study the electric and optical properties of both annealed and not annealed ITO-covered float glasses, ellipsometry, spectrophotometry, impedance analysis, and X-ray measurements were performed. Moreover, variable angle spectroscopic ellipsometry provides relevant information on the electronic and optical properties of the samples. ITO film is modeled as a dense lower layer and a surface roughness layer. The estimated optical density for ITO and the optical density of the surface roughness ITO layer increases with the annealing temperature. In the near-IR range, the extinction coefficient decreases while the maximum of the absorption in the near UV range shift towards low photon energy as the annealing temperature increases. Spectrophotometry was used to estimate the optical band-gap energy of the samples. The thermal annealing changes strongly the structural and optical properties of ITO thin films, because during the thermal processes, the ITO thin film absorbs oxygen from air. This oxygen absorption decreases the oxygen vacancies therefore the defect densities in the crystalline structure of the ITO thin films also decrease, as confirmed both by ellipsometry and X-ray measurements.     

Experimental study and configurational-coordinate model for photo-induced effects in amorphous As2Se3 films

The optical absorption of As₂Se₃ thin films is studied in the UV–VIS spectral range and the value of the optical energy gap is determined. The effect of photo-irradiation on the optical absorption and transmission of thin film samples is also investigated. The optical energy gap was found to decrease with photo-irradiation time. The results of photo-irradiation are discussed in correlation with the structural aspects of As₂Se₃. A model is proposed to account for the structural changes, resulting from photo-irradiation, causing the decrease of the energy gap. The effect of γ-radiation on the optical absorption of As₂Se₃ thin films was studied also and no detectable effect on the value of the optical energy gap was observed.     

紫外像增强器分辨力校准装置与方法研究

紫外像增强器作为导弹紫外告警系统、紫外预警系统以及各类紫外辐射监测系统的核心部件,其参数准确与否,直接影响到系统的图像质量。为保证测试数据的准确性,研制紫外像增强器分辨力校准装置,校准装置所用紫外光源是波长范围为200 nm～400 nm的紫外光,相对应的分辨力靶、滤光处、光学成像系统均要求能够透射紫外光,由于紫外波长较短,容易引起散射效应而产生大量的杂散光,设计的分辨力靶采用紫外级石英,紫外光学成像系统采用透射式结构,选用同轴共轭透镜作为紫外光学成像系统。实验和测量不确定度分析验证校准装置的测量不确定度为5%。     

Dielectric and optical properties of Ln0.8Lu0.2TiNbO6 (Ln = Ce,Pr, Nd & Sm) ceramics

Ln_0.8Lu_0.2TiNbO₆ (Ln = Ce, Pr, Nd & Sm) are synthesized through conventional solid state ceramic route. The XRD, FT Raman and FT IR studies revealed that the samples have aeschynite orthorhombic symmetry. The samples are sintered at 1230 ^∘C. Using SEM technique, microstructure of the sintered samples is analyzed. The dielectric properties of all the samples in the radio as well as microwave frequencies are studied. UV spectra of the samples are recorded and the optical band gap is estimated from the Tauc's plots. The samples are found to be photoluminescent materials with emissions at violet and green regions.     

Ion beam modification of surface properties of CR-39

The effects of ion-beam bombardment on the physical and chemical properties of poly(allyl diglycol carbonate) (CR-39) polymer have been investigated. CR-39 samples were bombarded with 320 keV Ar and 130 keV He ions at fluences ranging from 1 × 10¹³ to 2 × 10¹⁶ ions/cm². The nature and extent of radiation damage induced were studied by UV–VIS spectrometry, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, as well as Vickers' hardness measurements. In addition, the effect of ion fluence on the wetting properties of ion-beam bombarded CR-39 polymer was determined by measuring the contact angle for distilled water. UV–VIS spectra of bombarded samples reveal that the optical band gap decreases with increasing ion fluence for both Ar and He ions. In the FTIR spectra, changes in the intensity of the bands on irradiation relative to pristine samples occurred with the appearance of new bands. XRD analyses showed that the degree of ordering of the CR-39 polymer is dependent on the ion fluence. Changes of surface layer composition and an increase in the number of carbonaceous clusters produced important change in the energy gap and the surface wettability. The surface hardness increased from 10.54 MPa for pristine samples to 28.98 and 23.35 MPa for samples bombarded with Ar and He ions at the highest fluence, respectively.