Synthesis and characterization of a polyaniline-modified SnO<Subscript>2</Subscript> nanocomposite

Polyaniline-modified tin oxide and tin oxide nanoparticles were synthesized using a solution route technique. The obtained pristine products were characterized with X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and optical absorption spectroscopy. Thermogravimetric analysis results showed that the polyaniline-modified SnO₂ nanoparticles exhibit higher thermal stability than the SnO₂ nanoparticles. Scanning electron microscopy analysis on the as-synthesized powders showed spherical particle in the range of 50–100 nm.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Laser synthesis of magnetic iron oxide nanopowders

Magnetic iron oxide nanopowders are synthesized by the laser ablation of a target made of a coarse Fe₂O₃ powder. The geometric characteristics of the nanopowders and their yield are studied over a wide air pressure range ((1–34) × 10⁴ Pa) in an evaporation chamber. The phase compositions of the nanopowders and the conditions under which their chemical composition is closest to magnetite Fe₃O₄ are determined. The specific saturation magnetization and the coercive force of some iron oxide nanoparticles are measured.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Phase transformations in CaCO3/iron oxide composite induced by thermal treatment and laser irradiation

Calcium carbonate (CaCO₃)/iron oxide composites were synthesized through a simple one‐step impregnation procedure by mixing iron oxide nanoparticles (γ‐Fe₂O₃ and Fe₃O₄) of about 6 nm in size and CaCO₃ microparticles (Φ = 2 µm–8 µm, vaterite phase). The morphology and structural properties of CaCO₃, iron oxide nanoparticles and CaCO₃/iron oxide composites were characterized as a function of low iron content (0 %w to 3.2 %w) by scanning electron microscopy and transmission electron microscopy, X‐ray diffraction and ⁵⁷Fe Mössbauer spectrometry. The phase transformations induced by thermal treatment and laser irradiation were investigated in situ by X‐ray thermodiffraction (XRTD) and Raman spectroscopy. We have shown that the phase transformations observed by XRTD are also observed under laser irradiation as a consequence of the absorption of the laser irradiation by iron oxide nanoparticles. Copyright © 2012 John Wiley & Sons, Ltd.     

In situ preparation of high relaxivity iron oxide nanoparticles by coating with chitosan: A potential MRI contrast agent useful for cell tracking

Iron oxide nanocrystals are of considerable interest in nanoscience and nanotechnology because of their nanoscale dimensions, nontoxic nature, and superior magnetic properties. Colloidal solutions of magnetic nanoparticles (ferrofluids) with a high magnetite content are highly desirable for most molecular imaging applications. In this paper, we present a method for in situ coating of superparamagnetic iron oxide (SPIO) with chitosan in order to increase the content of magnetite. Iron chloride salts (Fe³⁺ and Fe²⁺) were directly coprecipitated inside a porous matrix of chitosan by Co-60 γ-ray irradiation in an aqueous solution of acetic acid. Following sonication, iron oxide nanoparticles were formed inside the chitosan matrix at a pH value of 9.5 and a temperature of 50 °C. The [Fe³⁺]:[Fe²⁺]:[NH₄OH] molar ratio was 1.6:1:15.8. The final ferrofluid was formed with a pH adjustment to approximately 2.0/3.0, alongside with the addition of mannitol and lactic acid. We subsequently characterized the particle size, the zeta potential, the iron concentration, the magnetic contrast, and the cellular uptake of our ferrofluid. Results showed a z-average diameter of 87.2 nm, a polydispersity index (PDI) of 0.251, a zeta potential of 47.9 mV, and an iron concentration of 10.4 mg Fe/mL. The MRI parameters included an R1 value of 22.0 mM⁻¹ s⁻¹, an R2 value of 202.6 mM⁻¹ s⁻¹, and a R2/R1 ratio of 9.2. An uptake of the ferrofluid by mouse macrophages was observed. Altogether, our data show that Co-60 γ-ray radiation on solid chitosan may improve chitosan coating of iron oxide nanoparticles and tackle its aqueous solubility at pH 7. Additionally, our methodology allowed to obtain a ferrofluid with a higher content of magnetite and a fairly unimodal distribution of monodisperse clusters. Finally, MRI and cell experiments demonstrated the potential usefulness of this product as a potential MRI contrast agent that might be used for cell tracking.     

Magnetic properties of iron nanoparticles in a polymer film

We systematically synthesized self-aggregated iron nanoparticles in the perfluorinated sulfo-cation membrane (MF-4SK) by ion-exchange method. Our experimental results show that iron nanoparticles in MF-4SK exhibit superparamagnetic properties above the blocking temperature. Field-cooled and zero-field-cooled magnetization data show the blocking temperature, T_B≅120 K for the iron concentration of 5×10¹⁹ atoms per 1 g of polymer film at 500 Oe applied field. This result is well matched with the calculation based on the temperature dependence of the coercivity, which shows T_B≅110 K, with the zero temperature coercivity (H_C0) ≅ 420 Oe. The radius of the typical iron particle is determined to be ∼2 nm from transmission electron microscopy (TEM), showing good agreement with the value acquired by Langevin function fit. These experimental evidences suggest that iron nanoparticles in the polymer film obey a single-domain theory.     

Synthesis and characterization of uncoated and gold-coated magnetite nanoparticles

We report on the synthesis and characterization of uncoated and gold coated magnetite nanoparticles. Structural characterizations, carried out using X-ray diffraction, confirm the formation of magnetite phase with a mean size of ~7 and ~8 nm for the uncoated and gold covered magnetite nanoparticles, respectively. The value of the gold coated Fe₃O₄ nanoparticles is consistent with the mean physical size determined from transmission electron microscopy images. Mössbauer spectra at room temperature are consistent with the thermal relaxation of magnetic moments mediated by particle-particle interactions. The 77 K Mössbauer spectra are modeled with four sextets. Those sextets are assigned to the signal of iron ions occupying the tetrahedral and octahedral sites in the core and shell parts of the particle. The room-temperature saturation magnetization value determined for the uncoated Fe₃O₄ nanoparticles is roughly ~60 emu/g and suggests the occurrence of surface effects such as magnetic disorder or the partial surface oxidation. These surface effects are reduced in the gold-coated Fe₃O₄ nanoparticles. Zero-field–cooled and field-cooled curves of both samples show irreversibilities which are consistent with a superparamagnetic behavior of interacting nanoparticles.     

Experimental and theoretical study on the β-FeOOH nanorods: growth and conversion

This study presents an experimental and theoretical study on the growth of monodispersed akaganéite (β-FeOOH) nanorods with tunable aspect ratios (longitudinal to transversal) under mild conditions (80 °C, aqueous solution). The synthesis of β-FeOOH nanorods is highly influenced by the presence of salt ions, and thus, the effect of various anions (e.g., NO₃ ⁻, SO₄ ²⁻, F⁻, Cl⁻, and Br⁻) were investigated on the microstructure, morphology, and size of the nanoparticles. It was found that these anions could interact strongly or weakly with the FeO₆ octahedral unit in the ferric oxyhydroxides, hence greatly affect the morphology, crystallization, and structure of the iron oxide/oxyhydroxide nanoparticles under the reported conditions. Moreover, these nanorods could be converted into magnetite (Fe₃O₄) through the reduction of hydrazine, which provides a new template approach to prepare magnetite nanorods with shape and size control at ambient conditions. The microstructure, composition, and structural transformation of the as-synthesized nanoparticles were characterized by various techniques, such as transmission electron microscopy (TEM and HRTEM), X-ray diffraction (XRD), and energy dispersive spectroscopy (EDS). The possible formation and growth mechanism of akaganéite nanorods were discussed. Finally, the influence of anions on the β-FeOOH(100), (110), and (001) surfaces was further understood by theoretical simulations (e.g., molecular dynamics method).     

Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants

Magnetic iron oxide nanoparticles were successfully prepared by a novel reverse precipitation method with the irradiation of ultrasound. TEM, XRD and SQUID analyses showed that the formed particles were magnetite (Fe₃O₄) with about 10 nm in their diameter. The magnetite nanoparticles exhibited superparamagnetism above 200 K, and the saturation magnetization was 32.8 emu/g at 300 K. The sizes and size distributions could be controlled by the feeding conditions of FeSO₄ · 7H₂O aqueous solution, and slower feeding rate and lower concentration lead to smaller and more uniform magnetite nanoparticles. The mechanisms of sonochemical oxidation were also discussed. The analyses of sonochemically produced oxidants in the presence of various gases suggested that besides sonochemically formed hydrogen peroxide, nitrite and nitrate ions contributed to Fe(II) ion oxidation.     

The effects of vacuum annealing on the structure and surface chemistry of iron nanoparticles

In order to increase the longevity of contaminant retention, a method is sought to improve the corrosion resistance of iron nanoparticles (INP) used for remediation of contaminated water and thereby extend their industrial lifetime. A multi-disciplinary approach was used to investigate changes induced by vacuum annealing (<5 × 10^?8 mbar) at 500 °C on the bulk and surface chemistry of INP. The particle size did not change significantly as a result of annealing but the surface oxide thickness decreased from an average of 3–4 nm to 2 nm. BET analysis recorded a decrease in INP surface area from 19.0 to 4.8 m² g^?1, consistent with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations which indicated the diffusion bonding of previously discrete particles at points of contact. X-ray diffraction (XRD) confirmed that recrystallisation of the metallic cores had occurred, converting a significant fraction of poorly crystalline iron to bcc α-Fe and Fe₂B phases. X-ray photoelectron spectroscopy (XPS) indicated a change in the surface oxide stoichiometry from magnetite (Fe₃O₄) towards wüstite (FeO) and the migration of boron and carbon to the particle surfaces. The improved core crystallinity and the presence of passivating impurity phases at the INP surfaces may act to improve the corrosion resistance and reactive lifespan of the vacuum annealed INP for environmental applications.     

Oleic acid coating on the monodisperse magnetite nanoparticles

Monodisperse magnetite nanoparticles provide a more factual model to study the interface interactions between the surfactants and magnetic nanoparticles. Monodisperse magnetite nanoparticles of 7 and 19 nm coated with oleic acid (OA) were prepared by the seed-mediated high temperature thermal decomposition of iron(III) acetylacetonate (Fe(acac)₃) precursor method. Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) reveal that the OA molecules were adsorbed on the magnetic nanoparticles by chemisorption way. Analyses of transmission electron microscopy (TEM) shows the OA provided the particles with better isolation and dispersibility. Thermogravimetric analysis (TGA) measurement results suggest that there were two kinds of different binding energies between the OA molecules and the magnetic nanoparticles. The cover density of OA molecules on the particle surface was significantly various with the size of magnetite nanoparticles. Magnetic measurements of the magnetite nanoparticles show the surface coating reduced the interactions among the nanoparticles.     

Effect of SiO2 nanoparticles sizes on the optical properties and radiation resistance of powder mixtures ZrO2 with micron sizes

One way to improve photo- and radiation resistance of materials is by the modification of their nanoparticles. The purpose of work is to study the optical properties and radiation resistance of ZrO₂ powder mixtures with SiO₂ nanoparticles without high-temperature heating. The ZrO₂ powders with micron sizes were mixed in a ratio of 100:7 mas.% with SiO₂ nanopowders. The nanopowders were obtained by combustion of silicon tetrachloride in air plasma. Samples were characterized using X-ray diffraction (XRD), high resolution scanning electron microscopy (SEM), and a simulator of the environment of outer space “Spectrum”. The radiation resistance increase of zirconia dioxide powders with micron-sized grains by the addition of silica nanoparticles without heating at a high temperature was found. For these purposes only water evaporation at 150 °C was used. The effectiveness of the modification reaches values of 2.1 times. This value is close to or even more in comparison to its values in the modification by using high-temperature heating. This result is significant for the practical use of this method of incensement of the radiation resistance of oxide reflecting powders.     

Phase-controlled preparation of iron (oxyhydr)oxide nanocrystallines for heavy metal removal

Obtaining cost-effective iron (oxyhydr)oxide nanocrystallines is the essential prerequisite for their future extensive applications in environmental remediation, such as the removal of heavy metals from contaminated waters. Here, various phases of iron (oxyhydr)oxide nanocrystallines were simply synthesized from the phase-controlled transformation of amorphous hydrous ferric- or ferrous-oxide in thermal solution with a certain ethanol/water ratio and with the presence of oleic acid. According to this method, goethite nanorods in diameter of 3–4 nm, hematite nanocubes sized 20–30 nm, and magnetite nanoparticles in diameter of 6–7 nm were successfully obtained. The final products of this transformation can be conveniently controlled by adjusting the reaction parameters, such as pH, temperature, and ethanol/water ratio. Due to the enhanced specific surface area and probably the modifications of the surface structure of nanocrystallines, the as-synthesized goethite nanorods and magnetite nanoparticles demonstrated extremely strong As(III) affinity, with 5.8 and 54 times of As(III) adsorption, respectively, higher than the micron-sized relatives. The cost-effective feature of as-synthesized nanocrystallines and their remarkably enhanced affinity toward arsenic made them potentially applicable for the removal of arsenic and such like heavy metals from the contaminated environment.     

Magnetic and Mössbauer spectroscopic studies of NiZn ferrite nanoparticles synthesized by a combustion method

The properties of nanocrystalline Ni_0.5Zn_0.5Fe₂O₄ synthesized by an auto-combustion method have been investigated by magnetic measurements and Mössbauer spectroscopy. The as-synthesized single phase nanosized ferrite powder is annealed at different temperatures in the range 673–1,273 K to obtain nanoparticles of different sizes. The powders are characterized by powder X-ray diffraction, vibrating sample magnetometer, transmission electron microscopy and Mössbauer spectroscopy. The as-synthesized powder with average particle size of ~9 nm is superparamagnetic. Magnetic transition temperature increases up to 665 K for the nanosized powder as compared to the transition temperature of 548 K for the bulk ferrite. This has been confirmed as due to the abnormal cation distribution, as evidenced from room temperature Mössbauer spectroscopic studies.     

Filamentary iron nanostructures from laser-induced pyrolysis of iron pentacarbonyl and ethylene mixtures

In this work, we present results of the synthesis and characterization of iron and iron oxide nanoparticles aggregated in filamentary, spider-web-like structures. The particles were produced in a flow reactor by CO₂ laser pyrolysis of gaseous mixtures of iron pentacarbonyl and ethylene. Low- and high-resolution electron microscopy reveals chain-like structures of particles, most of them being composed of an α-iron core and an iron oxide shell, identified as magnetite and, to a lesser extent, hematite. These results are in good agreement with a M?ssbauer analysis carried out for the same samples. The role of the reaction temperature on the synthesis of filamentary iron nanostructures by infrared laser pyrolysis of Fe(CO)₅/C₂H₄ mixtures is discussed. Received: 31 May 2000 / Accepted: 6 June 2000 / Published online: 2 August 2000     

Initial oxidation of MgO-supported Rh nanoparticles studied by TEM

The formation of ultrathin oxide layers on the facets of MgO(0 0 1) supported Rh nanoparticles is revealed by high-resolution transmission electron microscopy (HRTEM) and spatially-resolved electron energy-loss spectroscopy (EELS). An O–Rh–O trilayer surface oxide has been observed on both {1 1 1} and (0 0 1) facets, which is confirmed by image simulation using the atomic model of a two-dimensional surface oxide obtained by density functional theory (DFT). The spacing between the oxide layer and the Rh {1 1 1} facet is however markedly smaller, indicating a variation of interface bonding in the case of nanoparticles. When the oxide layer is slightly thicker with two Rh planes, the structure of the surface oxide is different from corundum Rh₂O₃ bulk oxide, and the trilayer surface oxide persists as terminating layer. The spacing between the oxide layer and the Rh(1 1 1) facet is found to vary, being smaller in the middle of the oxide layer. It is also found that oxidation is more pronounced at the intersections of the nanoparticles’ facets.     

Iron-carbon nanoparticles prepared by CO2 laser pyrolysis of toluene and iron pentacarbonyl

CO₂ laser induced co-pyrolysis of toluene and iron pentacarbonyl in the presence of an ethylene sensitizer was used to produce iron-carbon nanostructures containing cementite Fe₃C as the major component. The passivated Fe-C nanocomposites were characterized by several complementary analytical methods. Good agreement is found between the results of X-ray diffraction, Mössbauer spectroscopy and high-resolution transmission electron microscopy techniques which show that besides cementite, iron, and iron oxides, traces of other carbides are also present. Specific morphological aspects of the nanograins encased in a mostly disordered and quasi-amorphous carbon matrix are revealed. The simultaneous presence of rather small crystallites (mean diameter between 3–6 nm), identified as possible Fe₃C/α-Fe and iron oxide (maghemite/magnetite) phases and of single-phase larger crystallites (10–13 nm mean diameter), identified as Fe₃C is illustrated. Raman spectroscopy seems to confirm maghemite as the iron oxide phase present in the iron-carbon nanopowders. The level of oxidation mainly induced by powder passivation is roughly estimated by FTIR spectroscopy and leads to iron oxide contents between 11–17 wt.?%. The catalytic role of iron nanoparticles in the pyrolyzed system is addressed in connection with nanocarbon samples obtained in the absence of an iron donor.     

Degradation of magnetite nanoparticles in biomimetic media

Magnetic nanoparticles (NPs) of magnetite Fe₃O₄ obtained by coprecipitation (COP), thermal decomposition (DT), and commercial sample (CM) have been degraded in similar conditions to physiological medium at pH 4.7 and in simulated body fluid (SBF) at pH 7.4. The formation of the nanoparticles was confirmed by FTIR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). In view of medical and environmental applications, the stability of the particles was measured with dynamic light scattering. The degradation processes were followed with atomic absorption spectroscopy (EAA) and TEM. Magnetic measurements were carried out using vibrating sample magnetometry (VSM). Our results revealed that the structural and magnetic properties of the remaining nanoparticles after the degradation process were significantly different to those of the initial suspension. The degradation kinetics is affected by the pH, the coating, and the average particle size of the nanoparticles.     

Preparation of monodisperse magnetite nanoparticles under mild conditions

In this paper, we reported a method to prepare monodisperse magnetite nanoparticles at mild temperature using cheap and non-toxic precursors. It overcomes the shortages of chemical co-precipitation method and thermal decomposition method and combines the advantages of facile, cheap, large-scale, monodisperse, nanosize, and low synthesis temperature and low toxic. In this method, FeCl₃ · 6H₂O, FeCl₂ · 4H₂O and sodium oleate were mixed in toluene/ethanol/water mixture solvent and refluxed at 74 °C to prepare magnetite nanoparticles directly. The nanoparticles were characterized by transmission electron microscopy, dynamic light scattering, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer and thermogravimetric analysis. The magnetic properties of nanoparticles were measured by superconducting quantum interference device. The results showed that the nanoparticles are well-monodisperse with about 4–5 nm of average diameter. The nanoparticles were proved to be superparamagnetic with saturated magnetization 23.6 emu/g and blocking temperature 24.4 K. A possible formation mechanism of monodisperse magnetite nanoparticles was presented at the same time.