1,3-Dipolar cycloadditions of 2-thio-3-chloroacrylamides with nitrile oxides and nitrones

1,3-Dipolar cycloadditions of 2-thio-3-chloroacrylamides with nitrile oxides and nitrones is described. A series of novel isoxazolines are isolated from the nitrile oxide cycloadditions, whilst the isoxazolines generated from the nitrone cycloadditions undergo further ring opening to yield piperidines.     

Addition-substitution reactions of 2-thio-3-chloroacrylamides with carbon, nitrogen, oxygen, sulfur and selenium nucleophiles

Synthetically versatile conjugate addition of a range of carbon, nitrogen, oxygen, sulfur and selenium nucleophiles to the highly functionalised 2-thio-3-chloroacrylamides is described. The stereochemical and synthetic features of this transformation are discussed in detail. In most instances, the nucleophile replaces the chloro substituent with retention of stereochemistry. With the oxygen nucleophiles, a second addition can occur leading to acetals, while with the nitrogen nucleophiles, E-Z isomerism occurs in the resulting enamine derivatives. The ratio of the E/Z isomers can be rationalised on the basis of the substituent and the level of oxidation.     

Dienophile twisting and substituent effects influence reaction rates of intramolecular Diels-Alder cycloadditions: a DFT study

Intramolecular cycloadditions of 5-vinyl-1,3-cyclohexadienes were studied with B3LYP/6-31G(d) density functional calculations. The one-atom tether dictates that the Z substituent becomes exo and the E substituent becomes endo in the TS. The geometry of the cycloaddition TS is typical of a pericyclic transformation except unusual twisting of the dienophile places the endo substituent in a relatively steric-free position and the exo substituent in a highly crowded position. The experimental rate differences between isomeric pairs of vinylcyclohexadienes can be explained by comparing reactant destabilization when a bulky group occupies the Z position of the starting alkene and transition state stabilization when a bulky group is endo in the cycloaddition TS.     

An experimental and computational investigation of the Diels-Alder cycloadditions of halogen-substituted 2(H)-pyran-2-ones

[reaction: see text] Diels-Alder reactions of 3- and 5-halo-subsituted 2(H)-pyran-2-ones with both electron-rich and electron-deficient dienophiles afford stable and readily isolable bridged bicyclic lactone cycloadducts. These cycloadditions proceed with excellent regioselectivity and very good stereoselectivity. In contrast, Diels-Alder reactions of 4-halo-subsituted 2(H)-pyran-2-ones afford cycloadducts which are very prone to loss of bridging CO(2) and the subsequent formation of barrelenes ([2.2.2]cyclooctenes). Furthermore, these cycloadditions proceed with only moderate regio- and stereoselectivity. For both series of the 3- and 5-halo-subsituted 2(H)-pyran-2-ones and 4-halo-subsituted 2(H)-pyran-2-ones, the reactivity patterns do not significantly change between the halogens. The regio- and stereochemical preferences of the cycloadditions of halo-substituted 2(H)-pyran-2-ones are investigated computationally. Calculations were carried out on the transition states leading to the four possible regio- and stereoisomeric cycloadducts by using density functional theory (B3LYP/6-31G). These studies allow prediction of the regio- and stereoselectivity in these reactions which are broadly in line with experimental observations.     

Computational and experimental investigation of the Diels-Alder cycloadditions of 4-chloro-2(H)-pyran-2-one

4-Chloro-2(H)-pyran-2-one undergoes thermal Diels-Alder cycloaddition with electron-deficient dienophiles to afford, without any significant selectivity, 6-endo- and 5-endo-substituted bicyclic lactone cycloadducts. In contrast to 3- and 5-bromo-2(H)-pyran-2-one, 4-chloro-2(H)-pyran-2-one does not undergo thermal cycloadditions with electron-rich dienophiles. The regio- and stereochemical preferences of the cycloadditions of 4-chloro-2(H)-pyran-2-one and other related 2(H)-pyran-2-ones are investigated computationally. Calculations were carried out on the transition states leading to the four possible regio- and stereoisomeric cycloadducts using density functional theory (B3LYP/6-31G). These studies allow prediction of the regio- and stereoselectivity in these reactions which are in line with experimental observations.     

Heteroatom influence on the pi-facial selectivity of Diels-Alder cycloadditions to 1-oxa-4-thia-6-vinylspiro[4.5]dec-6-ene, 3-methoxy-3-methyl-2-vinylcyclohexene, and 3-methoxy-2-vinylcyclohexene

The facial selectivities of the Diels-Alder cycloadditions of several dienophiles to the title substrates were studied. The observed selectivities are interpreted as a consequence of the relative steric interactions offered by the substituents. The addition of dimethylacetylene dicarboxylate (DMAD) is influenced by the electrostatic repulsion arising from the interaction of an electron pair orbital on the acetal oxygen and the orthogonal pi-orbital of the acetylene unit in DMAD in the syn-to-oxygen addition of the latter. This repulsion is offset on coordination of Li+ to the said oxygen electron pair orbital, and the addition thus proceeds syn to oxygen. The enhanced and accelerated syn-to-oxygen addition in lithium perchlorate in nitromethane is interpreted as a consequence of the coordination of Li+ to both the acetal oxygen and a heteroatom in the dienophile that brings them in close proximity to facilitate a reaction. The Li+-oxygen combination, however, also exerts some steric effect that results in reduced syn-to-oxygen addition of dienophiles having large substituents such as N-phenylmaleimide.     

PPh3-catalyzed synthesis of dicyano-2-methylenebut-3-enoates as efficient dienes in catalytic asymmetric inverse-electron-demand Diels-Alder reaction

We present here the synthesis of dicyano-2-methylenebut-3-enoates as novel Diels-Alder dienes through an efficient PPh(3)-catalyzed strategy, and an unprecedented PPh(3)-catalyzed addition/all-carbon-based asymmetric inverse-electron-demand Diels-Alder sequence reaction is disclosed for the first time.     

An environmentally friendly,cost effective synthesis of quinoxalines: the influence of microwave reaction conditions

A convenient, environmentally friendly and novel synthesis of quinoxalines using silica gel as the catalyst is described. The choice of microwave conditions has been shown to have a substantial impact on the reaction outcome with closed-vessel microwave irradiation resulting in the formation of quinoxalines in high yields and short reaction times. Preliminary mechanistic investigations have indicated that a slight build-up in pressure has a major impact on the reaction outcome.     

Quantum chemical study on the thermal Diels-Alder reaction of cyclohexadiene and methyl crotonate

AM1 molecular orbital method using the unrestricted Hartree-Fock(UHF) calculations has been applied to investigate the thermal reaction of cyclohexadiene and methyl crotonate. The calculated results indicate that the thermal Diels-Alder reaction proceeds to product through the concerted path and two radical pathways.     

The scope of catalytic enantioselective tandem carbonyl ylide formation-intramolecular [3 + 2] cycloadditions

Catalytic enantioselective tandem carbonyl ylide formation-intramolecular 1,3-dipolar cycloaddition reactions of 2-diazo-3,6-diketoesters show promising scope in terms of asymmetric induction as the tethered alkene/alkyne dipolarophile component is varied. Cycloadditions were found to occur in moderate to very good yields, with a difference in ee exhibited by the electronically different 2-diazo-3,6-diketoesters 1, 25 and 33, 34. Values for ee of up to 90% for alkene dipolarophiles and up to 86% for alkyne dipolarophiles were obtained.     

Oxidative Diels-Alder reaction of 2, 5-dihydroxybenzoic acid with 1, 3-cyclopentadiene

The electrochemical oxidation of 2,5-dihydroxybenzoic acid (1) has been studied in the presence of 1,3-cyclopentadiene (2) as a diene in water/ethanol (40/60, v/v) mixture using cyclic voltammetry and controlled-potential coulometry. A plausible mechanism for the oxidation of 1 in the presence of 2 is presented. Compound 1 was converted into bis-adduct 5 via electrooxidation, Diels-Alder reaction of 2 to anodically generated 3,6-dioxocyclohexa-1,4-dienecarboxylic acid (1ox), decarboxylation reaction, electrooxidation and Diels-Alder reaction. The electrochemical synthesis of 5 was performed in a onepot reaction, without toxic reagents, at a carbon electrode in a simple cell using an environmentally friendly method.     

The influence of dissociation reaction on ammonium nitrate thermal decomposition reaction

In order to investigate the influence of dissociation reaction on thermal decomposition of ammonium nitrate (AN), biochar was selected as an adsorbent to interfere with the dissociation of AN. The TG-DSC results showed that the notable exothermic reaction of AN with the presence of 2% or 7% biochar took place. The decomposition temperature of AN decreased with increasing amount of biochar. The notable knee point was found in the TG curves. The activation energy of AN with biochar in the initial stage was higher than that of AN itself. Remote sensing Fourier transform infrared experiments found biochar induced AN decomposition at about 190 °C, which was also confirmed by the TG-MS results. After dissociation reaction, HNO₃ (g) and NH₃ (g) were adsorbed and crystalline of AN was formed on the surface of biochar. With the increasing temperature, NH₃ escaped from the surface of biochar, while HNO₃ (g) was stayed in biochar. HNO₃ (g) catalyzed the thermal decomposition of AN and also reacted with biochar. The results indicated that dissociation reaction of AN played an important role during AN thermal decomposition process. When dissociation reaction was changed, the thermal decomposition reaction of AN would also change, catalysis or inhibition AN thermal decomposition. It is a useful reference to guide the AN additives selection and to understand the mechanism for the AN decomposition accident.

     

Thermal and sonochemical studies on the Diels-Alder cycloadditions of masked o-benzoquinones with furans: new insights into the reaction mechanism

What does a Diels-Alder cycloaddition look like? This question is here addressed in the case of the increasingly significant cycloadditions of masked o-benzoquinones (MOBs), which serve as versatile dienes for the construction of complex and functionalized structures. So first, what the mechanism is not: It is not (by and large) a classical, concerted [4 + 2] cycloaddition. Experimental evidence is now supported by sonochemical studies, which were instrumental in elucidating the pathway. Reactions with furans are accelerated and improved under sonication, even when conducted at -10 degrees C. Variation of the acoustic energy, temperature, and solvent composition allows us to optimize the yields and provide insights into the mechanism. Ultrasound does not cause sonochemical switching, as an alternative radical pathway should be ruled out. Results are consistent with a polar mechanism as claimed recently in a theoretical study. Moreover, this also does justice to a series of seminal papers, largely ignored, that gave a clue to the crucial issue of furan regioselectivity based on a nucleophilic addition. Most effects caused by ultrasonic agitation are of mechanochemical nature and suggest the existence of a perfectly stirred reactor with enhanced mass transfer.     

An influence of thermal treatment conditions of hydrotalcite-like materials on their catalytic activity in the process of N<Subscript>2</Subscript>O decomposition

Hydrotalcite-like materials containing apart from magnesium and aluminum also copper, cobalt, nickel, and iron were prepared by a co-precipitation method. Thermal transformations of hydrotalcite-like materials were studied by thermal analysis methods as well as XRD, UV–vis–DRS, and XPS measurements of the samples calcined at various temperatures (600, 700, and 800 °C). Calcined hydrotalcites, especially those containing cobalt and copper, were found to be active and selective catalysts of N₂O decomposition. It was shown that an increase in the calcination temperature significantly activated the Co-containing catalysts. Promotion of the samples with potassium resulted in activation of the hydrotalcite-based catalysts.     

Diels-Alder cycloadditions of 3-phenylamino-5-bromo-2-pyrone for the synthesis of constrained α-amino acid derivatives

3-Phenylamino-5-bromo-2-pyrone undergoes facile Diels-Alder cycloadditions with various electron deficient dienophiles to afford an array of functionally rich and stereochemically defined cycloadducts in good to excellent isolated yields. Due to the electron donacity of the amine group, it only proceeds in normal electron demand D-A cycloadditions. Subsequent ring openings with NaOMe provided constrained α-amino acid derivatives.     

4 + 2] cycloadditions of N-alkenyl iminium ions: structurally complex heterocycles from a three-component Diels-Alder reaction sequence

N-Alkenyl iminium ions serve as conduits to three-component [4 + 2] cycloaddition reactions accessing structurally and stereochemically diverse piperidine derivatives. These cationic 2-azadienes participate in endo- or exo-selective [4 + 2] cycloadditions with electron-rich and neutral alkene dienophiles to generate a tetrahydropyridinium ion as the initial cycloadduct. In situ nucleophilic addition to the cycloaddition-derived iminium ion completes the three-component coupling sequence and affords a versatile synthesis of structurally complex piperidines.     

Mild and efficient boronic acid catalysis of Diels-Alder cycloadditions to 2-alkynoic acids

The concept of boronic acid catalysis (BAC) for the activation of unsaturated carboxylic acids is applied to the Diels-Alder cycloaddition between 2-alkynoic acids as dienophiles and various dienes. These [4+2] cycloadditions produce cyclohexadienyl carboxylic acids, which can be oxidized in situ to produce polysubstituted aromatic carboxylic acids. The boronic acid catalyst is suspected to provide activation by a LUMO-lowering effect of the unsaturated carboxylic acid likely via a covalent, monoacylated hemiboronic ester intermediate.     

Intermolecular and intramolecular Diels-Alder cycloadditions of 3-ylidenepiperazine-2,5-diones and 5-acyloxy-2(1h)-pyrazinones

The 3-ylidenepiperazine-2,5-diones 16 and 39 and 5-acyloxy-2(1H)-pyrazinones 17 can serve as starting materials for the Diels-Alder reactions of alkenes and alkynes to the piperazine ring, under acidic conditions or in the presence of acetyl chloride, to afford tricyclic piperazine-2,5-diones 19, 20, 23-25, 27, 44, and 45. Intramolecular cycloadditions occur if 3-ylidenepiperazine-2,5-diones 30 and 32 are used as the starting materials. This procedure is a convenient path to bridged bicyclo[2.2.2]diazaoctane ring systems such as 31 and 33, the former being found in biologically active secondary mold metabolites, such as VM55599 (1) or brevianamide A (5), which have been isolated from various fungi. The synthesis of the indole compound 31 provided evidence for the proposed biochemical pathway with a Diels-Alder reaction as key step. Quantum chemical calculations have revealed that piperazinones with a cationic azadiene moiety are the most reactive species in Diels-Alder cycloadditions.